swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
Tip revision: 521a547ced6477c54b4b0cc206000406c221b4d6 authored by Linus Torvalds on 18 September 2022, 20:44:14 UTC
Linux 6.0-rc6
Linux 6.0-rc6
Tip revision: 521a547
dma-example.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Sample fifo dma implementation
*
* Copyright (C) 2010 Stefani Seibold <stefani@seibold.net>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kfifo.h>
/*
* This module shows how to handle fifo dma operations.
*/
/* fifo size in elements (bytes) */
#define FIFO_SIZE 32
static struct kfifo fifo;
static int __init example_init(void)
{
int i;
unsigned int ret;
unsigned int nents;
struct scatterlist sg[10];
printk(KERN_INFO "DMA fifo test start\n");
if (kfifo_alloc(&fifo, FIFO_SIZE, GFP_KERNEL)) {
printk(KERN_WARNING "error kfifo_alloc\n");
return -ENOMEM;
}
printk(KERN_INFO "queue size: %u\n", kfifo_size(&fifo));
kfifo_in(&fifo, "test", 4);
for (i = 0; i != 9; i++)
kfifo_put(&fifo, i);
/* kick away first byte */
kfifo_skip(&fifo);
printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo));
/*
* Configure the kfifo buffer to receive data from DMA input.
*
* .--------------------------------------.
* | 0 | 1 | 2 | ... | 12 | 13 | ... | 31 |
* |---|------------------|---------------|
* \_/ \________________/ \_____________/
* \ \ \
* \ \_allocated data \
* \_*free space* \_*free space*
*
* We need two different SG entries: one for the free space area at the
* end of the kfifo buffer (19 bytes) and another for the first free
* byte at the beginning, after the kfifo_skip().
*/
sg_init_table(sg, ARRAY_SIZE(sg));
nents = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
printk(KERN_INFO "DMA sgl entries: %d\n", nents);
if (!nents) {
/* fifo is full and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_in_prepare\n");
return -EIO;
}
/* receive data */
printk(KERN_INFO "scatterlist for receive:\n");
for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page %p offset 0x%.8x length 0x%.8x\n",
i, sg_page(&sg[i]), sg[i].offset, sg[i].length);
if (sg_is_last(&sg[i]))
break;
}
/* put here your code to setup and exectute the dma operation */
/* ... */
/* example: zero bytes received */
ret = 0;
/* finish the dma operation and update the received data */
kfifo_dma_in_finish(&fifo, ret);
/* Prepare to transmit data, example: 8 bytes */
nents = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
printk(KERN_INFO "DMA sgl entries: %d\n", nents);
if (!nents) {
/* no data was available and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_out_prepare\n");
return -EIO;
}
printk(KERN_INFO "scatterlist for transmit:\n");
for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page %p offset 0x%.8x length 0x%.8x\n",
i, sg_page(&sg[i]), sg[i].offset, sg[i].length);
if (sg_is_last(&sg[i]))
break;
}
/* put here your code to setup and exectute the dma operation */
/* ... */
/* example: 5 bytes transmitted */
ret = 5;
/* finish the dma operation and update the transmitted data */
kfifo_dma_out_finish(&fifo, ret);
ret = kfifo_len(&fifo);
printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo));
if (ret != 7) {
printk(KERN_WARNING "size mismatch: test failed");
return -EIO;
}
printk(KERN_INFO "test passed\n");
return 0;
}
static void __exit example_exit(void)
{
kfifo_free(&fifo);
}
module_init(example_init);
module_exit(example_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Stefani Seibold <stefani@seibold.net>");