Skip to main content

Browse the archive

swh:1:snp:32555a3fd8878f019c2ebd6c964bc1edcaeff337
sort by:
Revision Author Date Message Commit Date
acee2e8 Thomas Gleixner 04 June 2019, 08:10:53 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 460 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.897982733@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:09 UTC
cb849fc Thomas Gleixner 04 June 2019, 08:10:52 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation the gpl this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license version 2 gplv2 for more details you should have received a copy of the gnu general public license version 2 gplv2 along with this source code extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 16 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:09 UTC
071fb96 Thomas Gleixner 04 June 2019, 08:10:51 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 457 Based on 2 normalized pattern(s): this file is licensed under gplv2 this file is part of the [aic94xx] driver the [aic94xx] driver is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license the [aic94xx] driver is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with [aic94xx] driver if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa this file is licensed under gplv2 this file is part of the [88se64xx] [88se94xx] driver the [88se64xx] [88se94xx] driver is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license the [88se64xx] [88se94xx] driver is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with [88se64xx] [88se94xx] driver if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.638289549@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:09 UTC
023b915 Thomas Gleixner 04 June 2019, 08:10:50 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 456 Based on 1 normalized pattern(s): driver is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 the [audiowerk2] [alsa] driver is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with the [audiowerk2] [alsa] driver if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.505559553@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:09 UTC
f71e737 Thomas Gleixner 04 June 2019, 08:10:49 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 455 Based on 1 normalized pattern(s): this package is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.371541790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:09 UTC
ea65cc9 Thomas Gleixner 04 June 2019, 08:10:48 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 454 Based on 1 normalized pattern(s): this program is free software you can distribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.231815901@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:09 UTC
d690ec5 Thomas Gleixner 04 June 2019, 08:10:46 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 452 Based on 1 normalized pattern(s): this program is free software void you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http void www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.003433009@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
f85d208 Thomas Gleixner 04 June 2019, 08:10:45 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 451 Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of the linux distribution for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081200.872755311@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
d686935 Thomas Gleixner 03 June 2019, 05:45:06 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 250 Based on 1 normalized pattern(s): gpl v2 can be found in copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 20 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204655.283615864@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
8092f73 Thomas Gleixner 03 June 2019, 05:45:04 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 248 Based on 1 normalized pattern(s): this file is released under the gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204655.103854853@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
ddceed9 Thomas Gleixner 03 June 2019, 05:45:03 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 247 Based on 1 normalized pattern(s): gnu gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204655.013483115@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
2c162f9 Thomas Gleixner 03 June 2019, 05:45:02 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 246 Based on 1 normalized pattern(s): released under the term of the gnu gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 16 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.922331175@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
d82444d Thomas Gleixner 03 June 2019, 05:45:01 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 245 Based on 1 normalized pattern(s): gpl v2 only extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.833758402@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
e311edb Thomas Gleixner 03 June 2019, 05:45:00 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 244 Based on 1 normalized pattern(s): this file is rleased under the gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.725819457@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:08 UTC
82c73e0 Thomas Gleixner 03 June 2019, 05:44:59 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 243 Based on 1 normalized pattern(s): this file is licensed under the gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.634736654@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:07 UTC
077e6e5 Thomas Gleixner 03 June 2019, 05:44:55 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 239 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.276825629@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:07 UTC
4ba774e Thomas Gleixner 03 June 2019, 05:44:54 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 238 Based on 2 normalized pattern(s): the original driver s license is gpl as declared with module_license this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation under version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the original driver s license is gpl as declared with module_license [copyright] [c] [2010] [2012] [mauro] [carvalho] [chehab] [driver] [modified] [by] [in] [order] [to] [work] [with] [upstream] [drxk] [driver] [and] [tons] [of] [bugs] [got] [fixed] [and] [converted] [to] [use] [dvb] [usb] [v2] this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation under version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.186977917@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:07 UTC
77512ba Thomas Gleixner 03 June 2019, 05:44:53 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 237 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204654.096873163@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:07 UTC
2504ba9 Thomas Gleixner 03 June 2019, 05:44:51 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 53 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:07 UTC
caab277 Thomas Gleixner 03 June 2019, 05:44:50 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:07 UTC
ac1dc6b Thomas Gleixner 03 June 2019, 05:44:49 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233 Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 6 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.720704315@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:06 UTC
a7d7a39 Thomas Gleixner 03 June 2019, 05:44:48 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 232 Based on 1 normalized pattern(s): licensed under the gnu general public license version 2 0 gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.630925848@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:06 UTC
b6a3d1b Thomas Gleixner 03 June 2019, 05:44:47 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 231 Based on 1 normalized pattern(s): this library is free software you can redistribute it and or modify it under the terms of the gnu general public license v2 as published by the free software foundation this library is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu lesser general public license for more details you should have received a copy of the gnu lesser general public license along with this library if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.539286961@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:06 UTC
40b0b3f Thomas Gleixner 03 June 2019, 05:44:46 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230 Based on 2 normalized pattern(s): this source code is licensed under the gnu general public license version 2 see the file copying for more details this source code is licensed under general public license version 2 see extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 52 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:06 UTC
33eea06 Thomas Gleixner 03 June 2019, 05:44:42 UTC treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 226 Based on 1 normalized pattern(s): licensed under the terms of the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.087533673@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 19 June 2019, 15:09:06 UTC
e4e5a86 Andrew Jones 27 May 2019, 11:46:19 UTC KVM: arm/arm64: Fix emulated ptimer irq injection The emulated ptimer needs to track the level changes, otherwise the the interrupt will never get deasserted, resulting in the guest getting stuck in an interrupt storm if it enables ptimer interrupts. This was found with kvm-unit-tests; the ptimer tests hung as soon as interrupts were enabled. Typical Linux guests don't have a problem as they prefer using the virtual timer. Fixes: bee038a674875 ("KVM: arm/arm64: Rework the timer code to use a timer_map") Signed-off-by: Andrew Jones <drjones@redhat.com> [Simplified the patch to res we only care about emulated timers here] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 19 June 2019, 14:47:52 UTC
48620e3 Rasmus Villemoes 19 June 2019, 10:02:13 UTC net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() The comment is correct, but the code ends up moving the bits four places too far, into the VTUOp field. Fixes: 11ea809f1a74 (net: dsa: mv88e6xxx: support 256 databases) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 14:23:33 UTC
9dba988 Aaron Lewis 31 May 2019, 14:14:52 UTC tests: kvm: Check for a kernel warning When running with /sys/module/kvm_intel/parameters/unrestricted_guest=N, test that a kernel warning does not occur informing us that vcpu->mmio_needed=1. This can happen when KVM_RUN is called after a triple fault. This test was made to detect a bug that was reported by Syzkaller (https://groups.google.com/forum/#!topic/syzkaller/lHfau8E3SOE) and fixed with commit bbeac2830f4de ("KVM: X86: Fix residual mmio emulation request to userspace"). Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 19 June 2019, 14:11:54 UTC
61cfcd5 Aaron Lewis 21 May 2019, 17:13:58 UTC kvm: tests: Sort tests in the Makefile alphabetically Signed-off-by: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Peter Shier <pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 19 June 2019, 14:11:53 UTC
b6b80c7 Sean Christopherson 13 June 2019, 17:22:23 UTC KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT SVM's Nested Page Tables (NPT) reuses x86 paging for the host-controlled page walk. For 32-bit KVM, this means PAE paging is used even when TDP is enabled, i.e. the PAE root array needs to be allocated. Fixes: ee6268ba3a68 ("KVM: x86: Skip pae_root shadow allocation if tdp enabled") Cc: stable@vger.kernel.org Reported-by: Jiri Palecek <jpalecek@web.de> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 19 June 2019, 14:11:53 UTC
6ca00df Liran Alon 16 June 2019, 12:03:10 UTC KVM: x86: Modify struct kvm_nested_state to have explicit fields for data Improve the KVM_{GET,SET}_NESTED_STATE structs by detailing the format of VMX nested state data in a struct. In order to avoid changing the ioctl values of KVM_{GET,SET}_NESTED_STATE, there is a need to preserve sizeof(struct kvm_nested_state). This is done by defining the data struct as "data.vmx[0]". It was the most elegant way I found to preserve struct size while still keeping struct readable and easy to maintain. It does have a misfortunate side-effect that now it has to be accessed as "data.vmx[0]" rather than just "data.vmx". Because we are already modifying these structs, I also modified the following: * Define the "format" field values as macros. * Rename vmcs_pa to vmcs12_pa for better readability. Signed-off-by: Liran Alon <liran.alon@oracle.com> [Remove SVM stubs, add KVM_STATE_NESTED_VMX_VMCS12_SIZE. - Paolo] Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 19 June 2019, 14:11:52 UTC
c285a2f Amir Goldstein 19 June 2019, 10:34:44 UTC fanotify: update connector fsid cache on add mark When implementing connector fsid cache, we only initialized the cache when the first mark added to object was added by FAN_REPORT_FID group. We forgot to update conn->fsid when the second mark is added by FAN_REPORT_FID group to an already attached connector without fsid cache. Reported-and-tested-by: syzbot+c277e8e2f46414645508@syzkaller.appspotmail.com Fixes: 77115225acc6 ("fanotify: cache fsid in fsnotify_mark_connector") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> 19 June 2019, 13:53:58 UTC
c6d9c35 yangerkun 26 March 2019, 14:00:02 UTC quota: fix a problem about transfer quota Run below script as root, dquot_add_space will return -EDQUOT since __dquot_transfer call dquot_add_space with flags=0, and dquot_add_space think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN. mkfs.ext4 -O quota,project /dev/vdb mount -o prjquota /dev/vdb /mnt setquota -P 23 1 1 0 0 /dev/vdb dd if=/dev/zero of=/mnt/test-file bs=4K count=1 chattr -p 23 test-file Fixes: 7b9ca4c61bc2 ("quota: Reduce contention on dq_data_lock") Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> 19 June 2019, 13:25:41 UTC
475df5d Ville Syrjälä 19 June 2019, 12:09:29 UTC drm/i915: Don't clobber M/N values during fastset check We're now calling intel_pipe_config_compare(..., true) uncoditionally which means we're always going clobber the calculated M/N values with the old values if the fuzzy M/N check passes. That causes problems because the fuzzy check allows for a huge difference in the values. I'm actually tempted to just make the M/N checks exact, but that might prevent fastboot from kicking in when people want it. So for now let's overwrite the computed values with the old values only if decide to skip the modeset. v2: Copy has_drrs along with M/N M2/N2 values Cc: stable@vger.kernel.org Cc: Blubberbub@protonmail.com Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Blubberbub@protonmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110782 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110675 Fixes: d19f958db23c ("drm/i915: Enable fastset for non-boot modesets.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190612172423.25231-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit f0521558a2a89d58a08745e225025d338572e60a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619120929.4057-1-ville.syrjala@linux.intel.com 19 June 2019, 12:57:09 UTC
9739ab7 Christoph Hellwig 13 June 2019, 08:24:46 UTC powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac With the strict dma mask checking introduced with the switch to the generic DMA direct code common wifi chips on 32-bit powerbooks stopped working. Add a 30-bit ZONE_DMA to the 32-bit pmac builds to allow them to reliably allocate dma coherent memory. Fixes: 65a21b71f948 ("powerpc/dma: remove dma_nommu_dma_supported") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 19 June 2019, 12:31:20 UTC
6dde1e4 Amir Goldstein 09 June 2019, 16:03:44 UTC ovl: make i_ino consistent with st_ino in more cases Relax the condition that overlayfs supports nfs export, to require that i_ino is consistent with st_ino/d_ino. It is enough to require that st_ino and d_ino are consistent. This fixes the failure of xfstest generic/504, due to mismatch of st_ino to inode number in the output of /proc/locks. Fixes: 12574a9f4c9c ("ovl: consistent i_ino for non-samefs with xino") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> 19 June 2019, 07:04:19 UTC
f5633ef Jani Nikula 19 June 2019, 06:59:58 UTC Merge tag 'gvt-fixes-2019-06-19' of https://github.com/intel/gvt-linux into drm-intel-fixes gvt-fixes-2019-06-19 - Fix reserved PVINFO register write (Weinan) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190619062240.GM9684@zhen-hp.sh.intel.com 19 June 2019, 06:59:59 UTC
5589b08 Arun Easi 14 June 2019, 14:36:27 UTC scsi: qla2xxx: Fix hardlockup in abort command during driver remove [436194.555537] NMI watchdog: Watchdog detected hard LOCKUP on cpu 5 [436194.555558] RIP: 0010:native_queued_spin_lock_slowpath+0x63/0x1e0 [436194.555563] Call Trace: [436194.555564] _raw_spin_lock_irqsave+0x30/0x40 [436194.555564] qla24xx_async_abort_command+0x29/0xd0 [qla2xxx] [436194.555565] qla24xx_abort_command+0x208/0x2d0 [qla2xxx] [436194.555565] __qla2x00_abort_all_cmds+0x16b/0x290 [qla2xxx] [436194.555565] qla2x00_abort_all_cmds+0x42/0x60 [qla2xxx] [436194.555566] qla2x00_abort_isp_cleanup+0x2bd/0x3a0 [qla2xxx] [436194.555566] qla2x00_remove_one+0x1ad/0x360 [qla2xxx] [436194.555566] pci_device_remove+0x3b/0xb0 Fixes: 219d27d7147e (scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands) Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 19 June 2019, 02:52:05 UTC
24e2e7a Stanley Chu 12 June 2019, 15:19:05 UTC scsi: ufs: Avoid runtime suspend possibly being blocked forever UFS runtime suspend can be triggered after pm_runtime_enable() is invoked in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered before binding ufs_hba structure to ufs device structure via platform_set_drvdata(), then UFS runtime suspend will be no longer triggered in the future because its dev->power.runtime_error was set in the first triggering and does not have any chance to be cleared. To be more clear, dev->power.runtime_error is set if hba is NULL in ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where dev->power.runtime_error is set as -EINVAL. In this case, any future rpm_suspend() for UFS device fails because rpm_check_suspend_allowed() fails due to non-zero dev->power.runtime_error. To resolve this issue, make sure the first UFS runtime suspend get valid "hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is successfully bound to UFS device structure. Fixes: 62694735ca95 ([SCSI] ufs: Add runtime PM support for UFS host controller driver) Cc: stable@vger.kernel.org Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 19 June 2019, 02:50:25 UTC
8cf4c54 Nilesh Javali 12 June 2019, 08:05:42 UTC scsi: qedi: update driver version to 8.37.0.20 Update qedi driver version to 8.37.0.20 Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 19 June 2019, 02:48:40 UTC
1ac3549 Nilesh Javali 12 June 2019, 08:05:41 UTC scsi: qedi: Check targetname while finding boot target information The kernel panic was observed during iSCSI discovery via offload with below call trace, [ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.646927] PGD 0 [ 2115.646932] Oops: 0000 [#1] SMP [ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 [ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed] [ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000 [ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>] [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.647141] RSP: 0018:ffff8d66afb83c68 EFLAGS: 00010206 [ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a [ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040 [ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff [ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0 [ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8 [ 2115.647149] FS: 0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000 [ 2115.647151] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0 [ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2115.647155] PKRU: 00000000 [ 2115.647157] Call Trace: [ 2115.647165] [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi] [ 2115.647184] [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed] [ 2115.647195] [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed] [ 2115.647206] [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed] [ 2115.647215] [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660 [ 2115.647221] [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580 [ 2115.647230] [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed] [ 2115.647278] RIP [<ffffffffacf7f0cc>] strncmp+0xc/0x60 Fix kernel panic by validating the session targetname before providing TLV data and confirming the presence of boot targets. Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 19 June 2019, 02:48:40 UTC
d470e72 David S. Miller 19 June 2019, 01:43:40 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Module autoload for masquerade and redirection does not work. 2) Leak in unqueued packets in nf_ct_frag6_queue(). Ignore duplicated fragments, pretend they are placed into the queue. Patches from Guillaume Nault. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 01:43:40 UTC
cb359b6 Sunil Muthuswamy 17 June 2019, 19:26:25 UTC hvsock: fix epollout hang from race condition Currently, hvsock can enter into a state where epoll_wait on EPOLLOUT will not return even when the hvsock socket is writable, under some race condition. This can happen under the following sequence: - fd = socket(hvsocket) - fd_out = dup(fd) - fd_in = dup(fd) - start a writer thread that writes data to fd_out with a combination of epoll_wait(fd_out, EPOLLOUT) and - start a reader thread that reads data from fd_in with a combination of epoll_wait(fd_in, EPOLLIN) - On the host, there are two threads that are reading/writing data to the hvsocket stack: hvs_stream_has_space hvs_notify_poll_out vsock_poll sock_poll ep_poll Race condition: check for epollout from ep_poll(): assume no writable space in the socket hvs_stream_has_space() returns 0 check for epollin from ep_poll(): assume socket has some free space < HVS_PKT_LEN(HVS_SEND_BUF_SIZE) hvs_stream_has_space() will clear the channel pending send size host will not notify the guest because the pending send size has been cleared and so the hvsocket will never mark the socket writable Now, the EPOLLOUT will never return even if the socket write buffer is empty. The fix is to set the pending size to the default size and never change it. This way the host will always notify the guest whenever the writable space is bigger than the pending size. The host is already optimized to *only* notify the guest when the pending size threshold boundary is crossed and not everytime. This change also reduces the cpu usage somewhat since hv_stream_has_space() is in the hotpath of send: vsock_stream_sendmsg()->hv_stream_has_space() Earlier hv_stream_has_space was setting/clearing the pending size on every call. Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 01:41:12 UTC
76e2153 Fred Klassen 17 June 2019, 19:05:07 UTC net/udp_gso: Allow TX timestamp with UDP GSO Fixes an issue where TX Timestamps are not arriving on the error queue when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING. This can be illustrated with an updated updgso_bench_tx program which includes the '-T' option to test for this condition. It also introduces the '-P' option which will call poll() before reading the error queue. ./udpgso_bench_tx -4ucTPv -S 1472 -l2 -D 172.16.120.18 poll timeout udp tx: 0 MB/s 1 calls/s 1 msg/s The "poll timeout" message above indicates that TX timestamp never arrived. This patch preserves tx_flags for the first UDP GSO segment. Only the first segment is timestamped, even though in some cases there may be benefital in timestamping both the first and last segment. Factors in deciding on first segment timestamp only: - Timestamping both first and last segmented is not feasible. Hardware can only have one outstanding TS request at a time. - Timestamping last segment may under report network latency of the previous segments. Even though the doorbell is suppressed, the ring producer counter has been incremented. - Timestamping the first segment has the upside in that it reports timestamps from the application's view, e.g. RTT. - Timestamping the first segment has the downside that it may underreport tx host network latency. It appears that we have to pick one or the other. And possibly follow-up with a config flag to choose behavior. v2: Remove tests as noted by Willem de Bruijn <willemb@google.com> Moving tests from net to net-next v3: Update only relevant tx_flag bits as per Willem de Bruijn <willemb@google.com> v4: Update comments and commit message as per Willem de Bruijn <willemb@google.com> Fixes: ee80d1ebe5ba ("udp: add udp gso") Signed-off-by: Fred Klassen <fklassen@appneta.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 01:38:07 UTC
e11e100 David S. Miller 19 June 2019, 01:30:39 UTC Merge branch 'net-netem-fix-issues-with-corrupting-GSO-frames' Jakub Kicinski says: ==================== net: netem: fix issues with corrupting GSO frames Corrupting GSO frames currently leads to crashes, due to skb use after free. These stem from the skb list handling - the segmented skbs come back on a list, and this list is not properly unlinked before enqueuing the segments. Turns out this condition is made very likely to occur because of another bug - in backlog accounting. Segments are counted twice, which means qdisc's limit gets reached leading to drops and making the use after free very likely to happen. The bugs are fixed in order in which they were added to the tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 01:30:39 UTC
3e14c38 Jakub Kicinski 17 June 2019, 18:11:11 UTC net: netem: fix use after free and double free with packet corruption Brendan reports that the use of netem's packet corruption capability leads to strange crashes. This seems to be caused by commit d66280b12bd7 ("net: netem: use a list in addition to rbtree") which uses skb->next pointer to construct a fast-path queue of in-order skbs. Packet corruption code has to invoke skb_gso_segment() in case of skbs in need of GSO. skb_gso_segment() returns a list of skbs. If next pointers of the skbs on that list do not get cleared fast path list may point to freed skbs or skbs which are also on the RB tree. Let's say skb gets segmented into 3 frames: A -> B -> C A gets hooked to the t_head t_tail list by tfifo_enqueue(), but it's next pointer didn't get cleared so we have: h t |/ A -> B -> C Now if B and C get also get enqueued successfully all is fine, because tfifo_enqueue() will overwrite the list in order. IOW: Enqueue B: h t | | A -> B C Enqueue C: h t | | A -> B -> C But if B and C get reordered we may end up with: h t RB tree |/ | A -> B -> C B \ C Or if they get dropped just: h t |/ A -> B -> C where A and B are already freed. To reproduce either limit has to be set low to cause freeing of segs or reorders have to happen (due to delay jitter). Note that we only have to mark the first segment as not on the list, "finish_segs" handling of other frags already does that. Another caveat is that qdisc_drop_all() still has to free all segments correctly in case of drop of first segment, therefore we re-link segs before calling it. v2: - re-link before drop, v1 was leaking non-first segs if limit was hit at the first seg - better commit message which lead to discovering the above :) Reported-by: Brendan Galloway <brendan.galloway@netronome.com> Fixes: d66280b12bd7 ("net: netem: use a list in addition to rbtree") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 01:30:38 UTC
177b800 Jakub Kicinski 17 June 2019, 18:11:10 UTC net: netem: fix backlog accounting for corrupted GSO frames When GSO frame has to be corrupted netem uses skb_gso_segment() to produce the list of frames, and re-enqueues the segments one by one. The backlog length has to be adjusted to account for new frames. The current calculation is incorrect, leading to wrong backlog lengths in the parent qdisc (both bytes and packets), and incorrect packet backlog count in netem itself. Parent backlog goes negative, netem's packet backlog counts all non-first segments twice (thus remaining non-zero even after qdisc is emptied). Move the variables used to count the adjustment into local scope to make 100% sure they aren't used at any stage in backports. Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 01:30:38 UTC
9476274 Colin Ian King 17 June 2019, 16:12:49 UTC net: lio_core: fix potential sign-extension overflow on large shift Left shifting the signed int value 1 by 31 bits has undefined behaviour and the shift amount oq_no can be as much as 63. Fix this by using BIT_ULL(oq_no) instead. Addresses-Coverity: ("Bad shift operation") Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 01:00:40 UTC
55458d2 David S. Miller 19 June 2019, 00:48:45 UTC Merge branch 'net-fix-quite-a-few-dst_cache-crashes-reported-by-syzbot' Xin Long says: ==================== net: fix quite a few dst_cache crashes reported by syzbot There are two kinds of crashes reported many times by syzbot with no reproducer. Call Traces are like: BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 __mkroute_output net/ipv4/route.c:2332 [inline] ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564 ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393 __ip_route_output_key include/net/route.h:125 [inline] ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651 ip_route_output_key include/net/route.h:135 [inline] ... or: kasan: GPF could be caused by NULL-ptr deref or user memory access RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168 <IRQ> rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline] free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217 __rcu_reclaim kernel/rcu/rcu.h:240 [inline] rcu_do_batch kernel/rcu/tree.c:2437 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline] rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697 ... They were caused by the fib_nh_common percpu member 'nhc_pcpu_rth_output' overwritten by another percpu variable 'dev->tstats' access overflow in tipc udp media xmit path when counting packets on a non tunnel device. The fix is to make udp tunnel work with no tunnel device by allowing not to count packets on the tstats when the tunnel dev is NULL in Patches 1/3 and 2/3, then pass a NULL tunnel dev in tipc_udp_tunnel() in Patch 3/3. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 00:48:45 UTC
c3bcde0 Xin Long 17 June 2019, 13:34:15 UTC tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device to count packets on dev->tstats, a perpcu variable. However, TIPC is using udp tunnel with no tunnel device, and pass the lower dev, like veth device that only initializes dev->lstats(a perpcu variable) when creating it. Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each pointer points to a bigger struct than lstats, so when tstats->tx_bytes is increased, other percpu variable's members could be overwritten. syzbot has reported quite a few crashes due to fib_nh_common percpu member 'nhc_pcpu_rth_output' overwritten, call traces are like: BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556 __mkroute_output net/ipv4/route.c:2332 [inline] ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564 ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393 __ip_route_output_key include/net/route.h:125 [inline] ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651 ip_route_output_key include/net/route.h:135 [inline] ... or: kasan: GPF could be caused by NULL-ptr deref or user memory access RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168 <IRQ> rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline] free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217 __rcu_reclaim kernel/rcu/rcu.h:240 [inline] rcu_do_batch kernel/rcu/tree.c:2437 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline] rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697 ... The issue exists since tunnel stats update is moved to iptunnel_xmit by Commit 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()"), and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb so that the packets counting won't happen on dev->tstats. Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 00:48:45 UTC
6f6a862 Xin Long 17 June 2019, 13:34:14 UTC ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL" is also needed by ip6_tunnel. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 00:48:45 UTC
5684abf Xin Long 17 June 2019, 13:34:13 UTC ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL iptunnel_xmit() works as a common function, also used by a udp tunnel which doesn't have to have a tunnel device, like how TIPC works with udp media. In these cases, we should allow not to count pkts on dev's tstats, so that udp tunnel can work with no tunnel device safely. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 June 2019, 00:48:45 UTC
156e429 Mike Salvatore 12 June 2019, 21:55:14 UTC apparmor: reset pos on failure to unpack for various functions Each function that manipulates the aa_ext struct should reset it's "pos" member on failure. This ensures that, on failure, no changes are made to the state of the aa_ext struct. There are paths were elements are optional and the error path is used to indicate the optional element is not present. This means instead of just aborting on error the unpack stream can become unsynchronized on optional elements, if using one of the affected functions. Cc: stable@vger.kernel.org Fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy") Signed-off-by: Mike Salvatore <mike.salvatore@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> 18 June 2019, 23:04:16 UTC
8404d7a Jann Horn 28 May 2019, 15:32:26 UTC apparmor: enforce nullbyte at end of tag string A packed AppArmor policy contains null-terminated tag strings that are read by unpack_nameX(). However, unpack_nameX() uses string functions on them without ensuring that they are actually null-terminated, potentially leading to out-of-bounds accesses. Make sure that the tag string is null-terminated before passing it to strcmp(). Cc: stable@vger.kernel.org Fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: John Johansen <john.johansen@canonical.com> 18 June 2019, 23:04:16 UTC
23375b1 John Johansen 26 May 2019, 13:42:23 UTC apparmor: fix PROFILE_MEDIATES for untrusted input While commit 11c236b89d7c2 ("apparmor: add a default null dfa") ensure every profile has a policy.dfa it does not resize the policy.start[] to have entries for every possible start value. Which means PROFILE_MEDIATES is not safe to use on untrusted input. Unforunately commit b9590ad4c4f2 ("apparmor: remove POLICY_MEDIATES_SAFE") did not take into account the start value usage. The input string in profile_query_cb() is user controlled and is not properly checked to be within the limited start[] entries, even worse it can't be as userspace policy is allowed to make us of entries types the kernel does not know about. This mean usespace can currently cause the kernel to access memory up to 240 entries beyond the start array bounds. Cc: stable@vger.kernel.org Fixes: b9590ad4c4f2 ("apparmor: remove POLICY_MEDIATES_SAFE") Signed-off-by: John Johansen <john.johansen@canonical.com> 18 June 2019, 23:04:16 UTC
7a5834e Gal Pressman 18 June 2019, 13:07:32 UTC RDMA/efa: Handle mmap insertions overflow When inserting a new mmap entry to the xarray we should check for 'mmap_page' overflow as it is limited to 32 bits. Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 20:27:24 UTC
440078d Jens Axboe 18 June 2019, 19:53:06 UTC Merge branch 'md-fixes' of https://github.com/liu-song-6/linux into for-linus Pull MD fix from Song. * 'md-fixes' of https://github.com/liu-song-6/linux: md: fix for divide error in status_resync 18 June 2019, 19:53:06 UTC
bed3c0d Linus Torvalds 18 June 2019, 18:20:24 UTC Merge tag 'for-5.2-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - regression where properties stored as xattrs are not properly persisted - a small readahead fix (the fstests testcase for that fix hangs on unpatched kernel, so we'd like get it merged to ease future testing) - fix a race during block group creation and deletion * tag 'for-5.2-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix failure to persist compression property xattr deletion on fsync btrfs: start readahead also in seed devices Btrfs: fix race between block group removal and block group allocation 18 June 2019, 18:20:24 UTC
7b30689 Linus Torvalds 18 June 2019, 17:59:59 UTC Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I've been bad at collecting fixes this release cycle, so this is a fairly large batch that's been trickling in for a while. It's the usual mix, more or less. Some of the bigger things fixed: - Voltage fix for MMC on TI DRA7 that sometimes would overvoltage cards - Regression fixes for D_CAN on am355x - i.MX6SX cpuidle fix to deal with wakeup latency (dropped uart chars) - DT fixes for some DRA7 variants that don't share the superset of blocks on the chip plus the usual mix of stuff: minor build/warning fixes, Kconfig dependencies, and some DT fixlets" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits) soc: ixp4xx: npe: Fix an IS_ERR() vs NULL check in probe ARM: ixp4xx: include irqs.h where needed ARM: ixp4xx: mark ixp4xx_irq_setup as __init ARM: ixp4xx: don't select SERIAL_OF_PLATFORM firmware: trusted_foundations: add ARMv7 dependency MAINTAINERS: Change QCOM repo location ARM: davinci: da8xx: specify dma_coherent_mask for lcdc ARM: davinci: da850-evm: call regulator_has_full_constraints() ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog ARM: dts: am335x phytec boards: Fix cd-gpios active level ARM: dts: dra72x: Disable usb4_tm target module arm64: arch_k3: Fix kconfig dependency warning ARM: dts: Drop bogus CLKSEL for timer12 on dra7 MAINTAINERS: Update Stefan Wahren email address ARM: dts: bcm: Add missing device_type = "memory" property soc: bcm: brcmstb: biuctrl: Register writes require a barrier soc: brcmstb: Fix error path for unsupported CPUs ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ... 18 June 2019, 17:59:59 UTC
72b319d Fei Li 17 June 2019, 13:26:36 UTC tun: wake up waitqueues after IFF_UP is set Currently after setting tap0 link up, the tun code wakes tx/rx waited queues up in tun_net_open() when .ndo_open() is called, however the IFF_UP flag has not been set yet. If there's already a wait queue, it would fail to transmit when checking the IFF_UP flag in tun_sendmsg(). Then the saving vhost_poll_start() will add the wq into wqh until it is waken up again. Although this works when IFF_UP flag has been set when tun_chr_poll detects; this is not true if IFF_UP flag has not been set at that time. Sadly the latter case is a fatal error, as the wq will never be waken up in future unless later manually setting link up on purpose. Fix this by moving the wakeup process into the NETDEV_UP event notifying process, this makes sure IFF_UP has been set before all waited queues been waken up. Signed-off-by: Fei Li <lifei.shirley@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 June 2019, 17:46:52 UTC
915ed93 Linus Torvalds 18 June 2019, 17:42:08 UTC Merge tag 'meminit-v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull stack init fix from Kees Cook: "This is a small update to the stack auto-initialization self-test code to deal with the Clang initialization pattern. It's been in linux-next for a couple weeks; I had waited a bit wondering if anything more substantial was going to show up, but nothing has, so I'm sending this now before it gets too late" * tag 'meminit-v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib/test_stackinit: Handle Clang auto-initialization pattern 18 June 2019, 17:42:08 UTC
74b67ef Dan Carpenter 18 June 2019, 13:18:43 UTC drm: return -EFAULT if copy_to_user() fails The copy_from_user() function returns the number of bytes remaining to be copied but we want to return a negative error code. Otherwise the callers treat it as a successful copy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190618131843.GA29463@mwanda 18 June 2019, 17:08:48 UTC
d0bae4a JingYi Hou 17 June 2019, 06:56:05 UTC net: remove duplicate fetch in sock_getsockopt In sock_getsockopt(), 'optlen' is fetched the first time from userspace. 'len < 0' is then checked. Then in condition 'SO_MEMINFO', 'optlen' is fetched the second time from userspace. If change it between two fetches may cause security problems or unexpected behaivor, and there is no reason to fetch it a second time. To fix this, we need to remove the second fetch. Signed-off-by: JingYi Hou <houjingyi647@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 June 2019, 17:04:16 UTC
d0f84d0 Tuong Lien 17 June 2019, 04:56:12 UTC tipc: fix issues with early FAILOVER_MSG from peer It appears that a FAILOVER_MSG can come from peer even when the failure link is resetting (i.e. just after the 'node_write_unlock()'...). This means the failover procedure on the node has not been started yet. The situation is as follows: node1 node2 linkb linka linka linkb | | | | | | x failure | | | RESETTING | | | | | | x failure RESET | | RESETTING FAILINGOVER | | | (FAILOVER_MSG) | | |<-------------------------------------------------| | *FAILINGOVER | | | | | (dummy FAILOVER_MSG) | | |------------------------------------------------->| | RESET | | FAILOVER_END | FAILINGOVER RESET | . . . . . . . . . . . . Once this happens, the link failover procedure will be triggered wrongly on the receiving node since the node isn't in FAILINGOVER state but then another link failover will be carried out. The consequences are: 1) A peer might get stuck in FAILINGOVER state because the 'sync_point' was set, reset and set incorrectly, the criteria to end the failover would not be met, it could keep waiting for a message that has already received. 2) The early FAILOVER_MSG(s) could be queued in the link failover deferdq but would be purged or not pulled out because the 'drop_point' was not set correctly. 3) The early FAILOVER_MSG(s) could be dropped too. 4) The dummy FAILOVER_MSG could make the peer leaving FAILINGOVER state shortly, but later on it would be restarted. The same situation can also happen when the link is in PEER_RESET state and a FAILOVER_MSG arrives. The commit resolves the issues by forcing the link down immediately, so the failover procedure will be started normally (which is the same as when receiving a FAILOVER_MSG and the link is in up state). Also, the function "tipc_node_link_failover()" is toughen to avoid such a situation from happening. Acked-by: Jon Maloy <jon.maloy@ericsson.se> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 18 June 2019, 17:03:37 UTC
cf18cec Mauro S. M. Rodrigues 13 June 2019, 19:25:40 UTC bnx2x: Check if transceiver implements DDM before access Some transceivers may comply with SFF-8472 even though they do not implement the Digital Diagnostic Monitoring (DDM) interface described in the spec. The existence of such area is specified by the 6th bit of byte 92, set to 1 if implemented. Currently, without checking this bit, bnx2x fails trying to read sfp module's EEPROM with the follow message: ethtool -m enP5p1s0f1 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it is assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM data was confirmed by Mellanox as correct and similar to other Passive DACs from other manufacturers. Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 June 2019, 17:02:40 UTC
ddd5798 Mathias Nyman 18 June 2019, 14:27:48 UTC xhci: detect USB 3.2 capable host controllers correctly USB 3.2 capability in a host can be detected from the xHCI Supported Protocol Capability major and minor revision fields. If major is 0x3 and minor 0x20 then the host is USB 3.2 capable. For USB 3.2 capable hosts set the root hub lane count to 2. The Major Revision and Minor Revision fields contain a BCD version number. The value of the Major Revision field is JJh and the value of the Minor Revision field is MNh for version JJ.M.N, where JJ = major revision number, M - minor version number, N = sub-minor version number, e.g. version 3.1 is represented with a value of 0310h. Also fix the extra whitespace printed out when announcing regular SuperSpeed hosts. Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 June 2019, 16:14:38 UTC
b8c3b71 Mathias Nyman 18 June 2019, 14:27:47 UTC usb: xhci: Don't try to recover an endpoint if port is in error state. A USB3 device needs to be reset and re-enumarated if the port it connects to goes to a error state, with link state inactive. There is no use in trying to recover failed transactions by resetting endpoints at this stage. Tests show that in rare cases, after multiple endpoint resets of a roothub port the whole host controller might stop completely. Several retries to recover from transaction error can happen as it can take a long time before the hub thread discovers the USB3 port error and inactive link. We can't reliably detect the port error from slot or endpoint context due to a limitation in xhci, see xhci specs section 4.8.3: "There are several cases where the EP State field in the Output Endpoint Context may not reflect the current state of an endpoint" and "Software should maintain an accurate value for EP State, by tracking it with an internal variable that is driven by Events and Doorbell accesses" Same appears to be true for slot state. set a flag to the corresponding slot if a USB3 roothub port link goes inactive to prevent both queueing new URBs and resetting endpoints. Reported-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com> Tested-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 June 2019, 16:14:38 UTC
76e3bcd Dennis Restle 29 April 2019, 23:01:49 UTC KVM: fix typo in documentation The documentation mentions a non-existing capability KVM_CAP_USER_MEM.s The right name is KVM_CAP_USER_MEMORY. Signed-off-by: Dennis Restle <derestle@htwg-konstanz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 18 June 2019, 15:46:45 UTC
9870dc3 Boris Brezillon 18 June 2019, 08:13:43 UTC drm/panfrost: Make sure a BO is only unmapped when appropriate mmu_ops->unmap() will fail when called on a BO that has not been previously mapped, and the error path in panfrost_ioctl_create_bo() can call drm_gem_object_put_unlocked() (which in turn calls panfrost_mmu_unmap()) on a BO that has not been mapped yet. Keep track of the mapped/unmapped state to avoid such issues. Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190618081343.16927-1-boris.brezillon@collabora.com 18 June 2019, 15:26:28 UTC
9642fa7 Mariusz Tkaczyk 13 June 2019, 14:11:41 UTC md: fix for divide error in status_resync Stopping external metadata arrays during resync/recovery causes retries, loop of interrupting and starting reconstruction, until it hit at good moment to stop completely. While these retries curr_mark_cnt can be small- especially on HDD drives, so subtraction result can be smaller than 0. However it is casted to uint without checking. As a result of it the status bar in /proc/mdstat while stopping is strange (it jumps between 0% and 99%). The real problem occurs here after commit 72deb455b5ec ("block: remove CONFIG_LBDAF"). Sector_div() macro has been changed, now the divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0. Check if db value can be really counted and replace these macro by div64_u64() inline. Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> 18 June 2019, 15:02:25 UTC
cd3967b Dan Carpenter 18 June 2019, 11:54:10 UTC soc: ixp4xx: npe: Fix an IS_ERR() vs NULL check in probe The devm_ioremap_resource() function doesn't return NULL, it returns error pointers. Fixes: 0b458d7b10f8 ("soc: ixp4xx: npe: Pass addresses as resources") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 18 June 2019, 13:47:59 UTC
615c48a Mike Rapoport 18 June 2019, 07:32:29 UTC arm64/mm: don't initialize pgd_cache twice When PGD_SIZE != PAGE_SIZE, arm64 uses kmem_cache for allocation of PGD memory. That cache was initialized twice: first through pgtable_cache_init() alias and then as an override for weak pgd_cache_init(). Remove the alias from pgtable_cache_init() and keep the only pgd_cache initialization in pgd_cache_init(). Fixes: caa841360134 ("x86/mm: Initialize PGD cache during mm initialization") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 18 June 2019, 13:37:28 UTC
2a08196 Hanjun Guo 17 June 2019, 11:02:15 UTC MAINTAINERS: Update my email address The @linaro.org address is not working and bonucing, so update the references. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 18 June 2019, 13:37:27 UTC
35341ca Anisse Astier 17 June 2019, 13:22:22 UTC arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h> Pulling linux/prctl.h into asm/ptrace.h in the arm64 UAPI headers causes userspace build issues for any program (e.g. strace and qemu) that includes both <sys/prctl.h> and <linux/ptrace.h> when using musl libc: | error: redefinition of 'struct prctl_mm_map' | struct prctl_mm_map { See https://github.com/foundriesio/meta-lmp/commit/6d4a106e191b5d79c41b9ac78fd321316d3013c0 for a public example of people working around this issue. Although it's a bit grotty, fix this breakage by duplicating the prctl constant definitions. Since these are part of the kernel ABI, they cannot be changed in future and so it's not the end of the world to have them open-coded. Fixes: 43d4da2c45b2 ("arm64/sve: ptrace and ELF coredump support") Cc: stable@vger.kernel.org Acked-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Anisse Astier <aastier@freebox.fr> Signed-off-by: Will Deacon <will.deacon@arm.com> 18 June 2019, 13:36:26 UTC
253e748 Nicolas Schier 17 June 2019, 07:39:00 UTC ovl: fix typo in MODULE_PARM_DESC Change first argument to MODULE_PARM_DESC() calls, that each of them matched the actual module parameter name. The matching results in changing (the 'parm' section from) the output of `modinfo overlay` from: parm: ovl_check_copy_up:Obsolete; does nothing parm: redirect_max:ushort parm: ovl_redirect_max:Maximum length of absolute redirect xattr value parm: redirect_dir:bool parm: ovl_redirect_dir_def:Default to on or off for the redirect_dir feature parm: redirect_always_follow:bool parm: ovl_redirect_always_follow:Follow redirects even if redirect_dir feature is turned off parm: index:bool parm: ovl_index_def:Default to on or off for the inodes index feature parm: nfs_export:bool parm: ovl_nfs_export_def:Default to on or off for the NFS export feature parm: xino_auto:bool parm: ovl_xino_auto_def:Auto enable xino feature parm: metacopy:bool parm: ovl_metacopy_def:Default to on or off for the metadata only copy up feature into: parm: check_copy_up:Obsolete; does nothing parm: redirect_max:Maximum length of absolute redirect xattr value (ushort) parm: redirect_dir:Default to on or off for the redirect_dir feature (bool) parm: redirect_always_follow:Follow redirects even if redirect_dir feature is turned off (bool) parm: index:Default to on or off for the inodes index feature (bool) parm: nfs_export:Default to on or off for the NFS export feature (bool) parm: xino_auto:Auto enable xino feature (bool) parm: metacopy:Default to on or off for the metadata only copy up feature (bool) Signed-off-by: Nicolas Schier <n.schier@avm.de> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> 18 June 2019, 13:06:16 UTC
1dac6f5 Arnd Bergmann 17 June 2019, 12:39:29 UTC ovl: fix bogus -Wmaybe-unitialized warning gcc gets a bit confused by the logic in ovl_setup_trap() and can't figure out whether the local 'trap' variable in the caller was initialized or not: fs/overlayfs/super.c: In function 'ovl_fill_super': fs/overlayfs/super.c:1333:4: error: 'trap' may be used uninitialized in this function [-Werror=maybe-uninitialized] iput(trap); ^~~~~~~~~~ fs/overlayfs/super.c:1312:17: note: 'trap' was declared here Reword slightly to make it easier for the compiler to understand. Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> 18 June 2019, 13:06:16 UTC
9179c21 Miklos Szeredi 18 June 2019, 13:06:16 UTC ovl: don't fail with disconnected lower NFS NFS mounts can be disconnected from fs root. Don't fail the overlapping layer check because of this. The check is not authoritative anyway, since topology can change during or after the check. Reported-by: Antti Antinoja <antti@fennosys.fi> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 146d62e5a586 ("ovl: detect overlapping layers") 18 June 2019, 13:06:16 UTC
8329338 Ulf Hansson 18 June 2019, 12:05:17 UTC mmc: core: Prevent processing SDIO IRQs when the card is suspended Processing of SDIO IRQs must obviously be prevented while the card is system suspended, otherwise we may end up trying to communicate with an uninitialized SDIO card. Reports throughout the years shows that this is not only a theoretical problem, but a real issue. So, let's finally fix this problem, by keeping track of the state for the card and bail out before processing the SDIO IRQ, in case the card is suspended. Cc: stable@vger.kernel.org Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 18 June 2019, 12:06:32 UTC
0f7b79a Raul E Rangel 17 June 2019, 20:10:12 UTC mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning The O2Micro controller only supports tuning at 4-bits. So the host driver needs to change the bus width while tuning and then set it back when done. There was a bug in the original implementation in that mmc->ios.bus_width also wasn't updated. Thus setting the incorrect blocksize in sdhci_send_tuning which results in a tuning failure. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Fixes: 0086fc217d5d7 ("mmc: sdhci: Add support for O2 hardware tuning") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 18 June 2019, 11:38:06 UTC
65dade6 Douglas Anderson 17 June 2019, 17:56:53 UTC brcmfmac: sdio: Don't tune while the card is off When Broadcom SDIO cards are idled they go to sleep and a whole separate subsystem takes over their SDIO communication. This is the Always-On-Subsystem (AOS) and it can't handle tuning requests. Specifically, as tested on rk3288-veyron-minnie (which reports having BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control() when "on = 1" (aka we're transition from sleep to wake) by whacking: bus->sdiodev->func1->card->host->need_retune = 1 ...then I can often see tuning fail. In this case dw_mmc reports "All phases bad!"). Note that I don't get 100% failure, presumably because sometimes the card itself has already transitioned away from the AOS itself by the time we try to wake it up. If I force retuning when "on = 0" (AKA force retuning right before sending the command to go to sleep) then retuning is always OK. NOTE: we need _both_ this patch and the patch to avoid triggering tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac: sdio: Disable auto-tuning around commands expected to fail"). Though both patches handle issues with Broadcom's AOS, the problems are distinct: 1. We want to defer (but not ignore) asynchronous (like timer-requested) tuning requests till the card is awake. However, we want to ignore CRC errors during the transition, we don't want to queue deferred tuning request. 2. You could imagine that the AOS could implement retuning but we could still get errors while transitioning in and out of the AOS. Similarly you could imagine a seamless transition into and out of the AOS (with no CRC errors) even if the AOS couldn't handle tuning. ALSO NOTE: presumably there is never a desperate need to retune in order to wake up the card, since doing so is impossible. Luckily the only way the card can get into sleep state is if we had a good enough tuning to send it the command to put it into sleep, so presumably that "good enough" tuning is enough to wake us up, at least with a few retries. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 18 June 2019, 11:30:35 UTC
b4c9f93 Douglas Anderson 17 June 2019, 17:56:52 UTC mmc: core: Add sdio_retune_hold_now() and sdio_retune_release() We want SDIO drivers to be able to temporarily stop retuning when the driver knows that the SDIO card is not in a state where retuning will work (maybe because the card is asleep). We'll move the relevant functions to a place where drivers can call them. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 18 June 2019, 11:30:32 UTC
2de0b42 Douglas Anderson 17 June 2019, 17:56:51 UTC brcmfmac: sdio: Disable auto-tuning around commands expected to fail There are certain cases, notably when transitioning between sleep and active state, when Broadcom SDIO WiFi cards will produce errors on the SDIO bus. This is evident from the source code where you can see that we try commands in a loop until we either get success or we've tried too many times. The comment in the code reinforces this by saying "just one write attempt may fail" Unfortunately these failures sometimes end up causing an "-EILSEQ" back to the core which triggers a retuning of the SDIO card and that blocks all traffic to the card until it's done. Let's disable retuning around the commands we expect might fail. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 18 June 2019, 11:30:29 UTC
0a55f4a Douglas Anderson 17 June 2019, 17:56:50 UTC mmc: core: API to temporarily disable retuning for SDIO CRC errors Normally when the MMC core sees an "-EILSEQ" error returned by a host controller then it will trigger a retuning of the card. This is generally a good idea. However, if a command is expected to sometimes cause transfer errors then these transfer errors shouldn't cause a re-tuning. This re-tuning will be a needless waste of time. One example case where a transfer is expected to cause errors is when transitioning between idle (sometimes referred to as "sleep" in Broadcom code) and active state on certain Broadcom WiFi SDIO cards. Specifically if the card was already transitioning between states when the command was sent it could cause an error on the SDIO bus. Let's add an API that the SDIO function drivers can call that will temporarily disable the auto-tuning functionality. Then we can add a call to this in the Broadcom WiFi driver and any other driver that might have similar needs. NOTE: this makes the assumption that the card is already tuned well enough that it's OK to disable the auto-retuning during one of these error-prone situations. Presumably the driver code performing the error-prone transfer knows how to recover / retry from errors. ...and after we can get back to a state where transfers are no longer error-prone then we can enable the auto-retuning again. If we truly find ourselves in a case where the card needs to be retuned sometimes to handle one of these error-prone transfers then we can always try a few transfers first without auto-retuning and then re-try with auto-retuning if the first few fail. Without this change on rk3288-veyron-minnie I periodically see this in the logs of a machine just sitting there idle: dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 18 June 2019, 11:30:21 UTC
abdd5dc Douglas Anderson 17 June 2019, 17:56:49 UTC Revert "brcmfmac: disable command decode in sdio_aos" This reverts commit 29f6589140a10ece8c1d73f58043ea5b3473ab3e. After that patch landed I find that my kernel log on rk3288-veyron-minnie and rk3288-veyron-speedy is filled with: brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110 This seems to happen every time the Broadcom WiFi transitions out of sleep mode. Reverting the commit fixes the problem for me, so that's what this patch does. Note that, in general, the justification in the original commit seemed a little weak. It looked like someone was testing on a SD card controller that would sometimes die if there were CRC errors on the bus. This used to happen back in early days of dw_mmc (the controller on my boards), but we fixed it. Disabling a feature on all boards just because one SD card controller is broken seems bad. Fixes: 29f6589140a1 ("brcmfmac: disable command decode in sdio_aos") Cc: Wright Feng <wright.feng@cypress.com> Cc: Double Lo <double.lo@cypress.com> Cc: Madhan Mohan R <madhanmohan.r@cypress.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 18 June 2019, 11:30:18 UTC
140d900 Arnd Bergmann 17 June 2019, 12:24:32 UTC ARM: ixp4xx: include irqs.h where needed Multiple ixp4xx specific files require macros from irqs.h that were moved out from mach/irqs.h, e.g.: arch/arm/mach-ixp4xx/vulcan-pci.c:41:19: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes] arch/arm/mach-ixp4xx/vulcan-pci.c:49:10: error: implicit declaration of function 'IXP4XX_GPIO_IRQ' [-Werror,-Wimplicit-function-declaration] return IXP4XX_GPIO_IRQ(INTA); Include this header in all files that failed to build because of that. Fixes: dc8ef8cd3a05 ("ARM: ixp4xx: Convert to SPARSE_IRQ") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 18 June 2019, 10:49:44 UTC
4ea1015 Arnd Bergmann 17 June 2019, 12:24:31 UTC ARM: ixp4xx: mark ixp4xx_irq_setup as __init Kbuild complains about ixp4xx_irq_setup not being __init itself in some configurations: WARNING: vmlinux.o(.text+0x85bae4): Section mismatch in reference from the function ixp4xx_irq_setup() to the function .init.text:set_handle_irq() The function ixp4xx_irq_setup() references the function __init set_handle_irq(). This is often because ixp4xx_irq_setup lacks a __init annotation or the annotation of set_handle_irq is wrong. I suspect it normally gets inlined, so we get no such warning, but clang makes this obvious when the function is left out of line. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 18 June 2019, 10:49:41 UTC
6d8df60 Arnd Bergmann 17 June 2019, 12:24:30 UTC ARM: ixp4xx: don't select SERIAL_OF_PLATFORM Platforms should not normally select all the device drivers, leave that up to the user and the defconfig file. In this case, we get a warning for randconfig builds: WARNING: unmet direct dependencies detected for SERIAL_OF_PLATFORM Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && SERIAL_8250 [=n] && OF [=y] Selected by [y]: - MACH_IXP4XX_OF [=y] && ARCH_IXP4XX [=y] Fixes: 9540724ca29d ("ARM: ixp4xx: Add device tree boot support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 18 June 2019, 10:49:38 UTC
cad47b3 Arnd Bergmann 17 June 2019, 12:33:23 UTC firmware: trusted_foundations: add ARMv7 dependency The "+sec" extension is invalid for older ARM architectures, but the code can now be built on any ARM configuration: /tmp/trusted_foundations-2d0882.s: Assembler messages: /tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode /tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode Add a dependency on ARMv7 for the build. Fixes: 4cb5d9eca143 ("firmware: Move Trusted Foundations support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 18 June 2019, 10:20:35 UTC
42de8af Jules Maselbas 09 May 2019, 09:15:28 UTC usb: dwc2: Use generic PHY width in params setup Setting params.phy_utmi_width in dwc2_lowlevel_hw_init() is pointless since it's value will be overwritten by dwc2_init_params(). This change make sure to take in account the generic PHY width information during paraminitialisation, done in dwc2_set_param_phy_utmi_width(). By doing so, the phy_utmi_width params can still be overrided by devicetree specific params and will also be checked against hardware capabilities. Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 18 June 2019, 07:27:14 UTC
5292543 Gal Pressman 12 June 2019, 07:28:41 UTC RDMA/efa: Fix success return value in case of error Existing code would mistakenly return success in case of error instead of a proper return value. Fixes: e9c6c5373088 ("RDMA/efa: Add common command handlers") Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:35:21 UTC
942a899 Mike Marciniszyn 14 June 2019, 16:33:06 UTC IB/hfi1: Handle port down properly in pio The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:15:40 UTC
099a884 Mike Marciniszyn 14 June 2019, 16:33:00 UTC IB/hfi1: Handle wakeup of orphaned QPs for pio Once a send context is taken down due to a link failure, any QPs waiting for pio credits will stay on the waitlist indefinitely. Fix by wakeing up all QPs linked to piowait list. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:15:40 UTC
f972775 Mike Marciniszyn 14 June 2019, 16:32:50 UTC IB/hfi1: Wakeup QPs orphaned on wait list after flush Once an SDMA engine is taken down due to a link failure, any waiting QPs that do not have outstanding descriptors in the ring will stay on the dmawait list as long as the port is down. Since there is no timer running, they will stay there for a long time. The fix is to wake up all iowaits linked to dmawait. The send engine will build and post packets that get flushed back. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:15:40 UTC
4bb02e9 Mike Marciniszyn 14 June 2019, 16:32:44 UTC IB/hfi1: Use aborts to trigger RC throttling SDMA and pio flushes will cause a lot of packets to be transmitted after a link has gone down, using a lot of CPU to retransmit packets. Fix for RC QPs by recognizing the flush status and: - Forcing a timer start - Putting the QP into a "send one" mode Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:15:40 UTC
9755f72 Mike Marciniszyn 14 June 2019, 16:32:38 UTC IB/hfi1: Create inline to get extended headers This paves the way for another patch that reacts to a flush sdma completion for RC. Fixes: 81cd3891f021 ("IB/hfi1: Add support for 16B Management Packets") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:15:40 UTC
3230f4a Mike Marciniszyn 14 June 2019, 16:32:32 UTC IB/hfi1: Silence txreq allocation warnings The following warning can happen when a memory shortage occurs during txreq allocation: [10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) [10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [10220.939247] cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0 [10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1] [10220.939261] node 0: slabs: 1026568, objs: 43115856, free: 0 [10220.939262] Call Trace: [10220.939262] node 1: slabs: 820872, objs: 34476624, free: 0 [10220.939263] dump_stack+0x5a/0x73 [10220.939265] warn_alloc+0x103/0x190 [10220.939267] ? wake_all_kswapds+0x54/0x8b [10220.939268] __alloc_pages_slowpath+0x86c/0xa2e [10220.939270] ? __alloc_pages_nodemask+0x2fe/0x320 [10220.939271] __alloc_pages_nodemask+0x2fe/0x320 [10220.939273] new_slab+0x475/0x550 [10220.939275] ___slab_alloc+0x36c/0x520 [10220.939287] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939299] ? __get_txreq+0x54/0x160 [hfi1] [10220.939310] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939312] __slab_alloc+0x40/0x61 [10220.939323] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939325] kmem_cache_alloc+0x181/0x1b0 [10220.939336] hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939348] ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1] [10220.939359] ? find_prev_entry+0xb0/0xb0 [hfi1] [10220.939371] hfi1_do_send+0x1d9/0x3f0 [hfi1] [10220.939372] process_one_work+0x171/0x380 [10220.939374] worker_thread+0x49/0x3f0 [10220.939375] kthread+0xf8/0x130 [10220.939377] ? max_active_store+0x80/0x80 [10220.939378] ? kthread_bind+0x10/0x10 [10220.939379] ret_from_fork+0x35/0x40 [10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:15:40 UTC
cf131a8 Mike Marciniszyn 14 June 2019, 16:32:26 UTC IB/hfi1: Avoid hardlockup with flushlist_lock Heavy contention of the sde flushlist_lock can cause hard lockups at extreme scale when the flushing logic is under stress. Mitigate by replacing the item at a time copy to the local list with an O(1) list_splice_init() and using the high priority work queue to do the flushes. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 18 June 2019, 01:15:40 UTC
84b0282 Suraj Jitindar Singh 17 June 2019, 07:16:19 UTC KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode The hcall H_SET_DAWR is used by a guest to set the data address watchpoint register (DAWR). This hcall is handled in the host in kvmppc_h_set_dawr() which can be called in either real mode on the guest exit path from hcall_try_real_mode() in book3s_hv_rmhandlers.S, or in virtual mode when called from kvmppc_pseries_do_hcall() in book3s_hv.c. The function kvmppc_h_set_dawr() updates the dawr and dawrx fields in the vcpu struct accordingly and then also writes the respective values into the DAWR and DAWRX registers directly. It is necessary to write the registers directly here when calling the function in real mode since the path to re-enter the guest won't do this. However when in virtual mode the host DAWR and DAWRX values have already been restored, and so writing the registers would overwrite these. Additionally there is no reason to write the guest values here as these will be read from the vcpu struct and written to the registers appropriately the next time the vcpu is run. This also avoids the case when handling h_set_dawr for a nested guest where the guest hypervisor isn't able to write the DAWR and DAWRX registers directly and must rely on the real hypervisor to do this for it when it calls H_ENTER_NESTED. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 18 June 2019, 00:21:19 UTC
fabb2ef Michael Neuling 17 June 2019, 07:16:18 UTC KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr() Commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") screwed up some assembler and corrupted a pointer in r3. This resulted in crashes like the below: BUG: Kernel NULL pointer dereference at 0x000013bf Faulting instruction address: 0xc00000000010b044 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 8 PID: 1771 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc4+ #3 NIP: c00000000010b044 LR: c0080000089dacf4 CTR: c00000000010aff4 REGS: c00000179b397710 TRAP: 0300 Not tainted (5.2.0-rc4+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 42244842 XER: 00000000 CFAR: c00000000010aff8 DAR: 00000000000013bf DSISR: 42000000 IRQMASK: 0 GPR00: c0080000089dd6bc c00000179b3979a0 c008000008a04300 ffffffffffffffff GPR04: 0000000000000000 0000000000000003 000000002444b05d c0000017f11c45d0 ... NIP kvmppc_h_set_dabr+0x50/0x68 LR kvmppc_pseries_do_hcall+0xa3c/0xeb0 [kvm_hv] Call Trace: 0xc0000017f11c0000 (unreliable) kvmppc_vcpu_run_hv+0x694/0xec0 [kvm_hv] kvmppc_vcpu_run+0x34/0x48 [kvm] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm] kvm_vcpu_ioctl+0x460/0x850 [kvm] do_vfs_ioctl+0xe4/0xb40 ksys_ioctl+0xc4/0x110 sys_ioctl+0x28/0x80 system_call+0x5c/0x70 Instruction dump: 4082fff4 4c00012c 38600000 4e800020 e96280c0 896b0000 2c2b0000 3860ffff 4d820020 50852e74 508516f6 78840724 <f88313c0> f8a313c8 7c942ba6 7cbc2ba6 Fix the bug by only changing r3 when we are returning immediately. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 18 June 2019, 00:19:22 UTC
29f785f Linus Torvalds 17 June 2019, 23:28:28 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "MS_MOVE regression fix + breakage in fsmount(2) (also introduced in this cycle, along with fsmount(2) itself). I'm still digging through the piles of mail, so there might be more fixes to follow, but these two are obvious and self-contained, so there's no point delaying those..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/namespace: fix unprivileged mount propagation vfs: fsmount: add missing mntget() 17 June 2019, 23:28:28 UTC
back to top