swh:1:snp:38ae39f9fd01a4b0ef06fab5668b65bf4c2aca03
Tip revision: 77b67063bb6bce6d475e910d3b886a606d0d91f7 authored by Linus Torvalds on 11 November 2012, 12:44:33 UTC
Linux 3.7-rc5
Linux 3.7-rc5
Tip revision: 77b6706
exynos-cpufreq.c
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - CPU frequency scaling support for EXYNOS series
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
#include <linux/suspend.h>
#include <mach/cpufreq.h>
#include <plat/cpu.h>
static struct exynos_dvfs_info *exynos_info;
static struct regulator *arm_regulator;
static struct cpufreq_freqs freqs;
static unsigned int locking_frequency;
static bool frequency_locked;
static DEFINE_MUTEX(cpufreq_lock);
int exynos_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy,
exynos_info->freq_table);
}
unsigned int exynos_getspeed(unsigned int cpu)
{
return clk_get_rate(exynos_info->cpu_clk) / 1000;
}
static int exynos_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int index, old_index;
unsigned int arm_volt, safe_arm_volt = 0;
int ret = 0;
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
unsigned int *volt_table = exynos_info->volt_table;
unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
mutex_lock(&cpufreq_lock);
freqs.old = policy->cur;
if (frequency_locked && target_freq != locking_frequency) {
ret = -EAGAIN;
goto out;
}
/*
* The policy max have been changed so that we cannot get proper
* old_index with cpufreq_frequency_table_target(). Thus, ignore
* policy and get the index from the raw freqeuncy table.
*/
for (old_index = 0;
freq_table[old_index].frequency != CPUFREQ_TABLE_END;
old_index++)
if (freq_table[old_index].frequency == freqs.old)
break;
if (freq_table[old_index].frequency == CPUFREQ_TABLE_END) {
ret = -EINVAL;
goto out;
}
if (cpufreq_frequency_table_target(policy, freq_table,
target_freq, relation, &index)) {
ret = -EINVAL;
goto out;
}
freqs.new = freq_table[index].frequency;
freqs.cpu = policy->cpu;
/*
* ARM clock source will be changed APLL to MPLL temporary
* To support this level, need to control regulator for
* required voltage level
*/
if (exynos_info->need_apll_change != NULL) {
if (exynos_info->need_apll_change(old_index, index) &&
(freq_table[index].frequency < mpll_freq_khz) &&
(freq_table[old_index].frequency < mpll_freq_khz))
safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
}
arm_volt = volt_table[index];
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* When the new frequency is higher than current frequency */
if ((freqs.new > freqs.old) && !safe_arm_volt) {
/* Firstly, voltage up to increase frequency */
regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
}
if (safe_arm_volt)
regulator_set_voltage(arm_regulator, safe_arm_volt,
safe_arm_volt);
if (freqs.new != freqs.old)
exynos_info->set_freq(old_index, index);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
/* When the new frequency is lower than current frequency */
if ((freqs.new < freqs.old) ||
((freqs.new > freqs.old) && safe_arm_volt)) {
/* down the voltage after frequency change */
regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
}
out:
mutex_unlock(&cpufreq_lock);
return ret;
}
#ifdef CONFIG_PM
static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
{
return 0;
}
static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
{
return 0;
}
#endif
/**
* exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
* context
* @notifier
* @pm_event
* @v
*
* While frequency_locked == true, target() ignores every frequency but
* locking_frequency. The locking_frequency value is the initial frequency,
* which is set by the bootloader. In order to eliminate possible
* inconsistency in clock values, we save and restore frequencies during
* suspend and resume and block CPUFREQ activities. Note that the standard
* suspend/resume cannot be used as they are too deep (syscore_ops) for
* regulator actions.
*/
static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
unsigned long pm_event, void *v)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
static unsigned int saved_frequency;
unsigned int temp;
mutex_lock(&cpufreq_lock);
switch (pm_event) {
case PM_SUSPEND_PREPARE:
if (frequency_locked)
goto out;
frequency_locked = true;
if (locking_frequency) {
saved_frequency = exynos_getspeed(0);
mutex_unlock(&cpufreq_lock);
exynos_target(policy, locking_frequency,
CPUFREQ_RELATION_H);
mutex_lock(&cpufreq_lock);
}
break;
case PM_POST_SUSPEND:
if (saved_frequency) {
/*
* While frequency_locked, only locking_frequency
* is valid for target(). In order to use
* saved_frequency while keeping frequency_locked,
* we temporarly overwrite locking_frequency.
*/
temp = locking_frequency;
locking_frequency = saved_frequency;
mutex_unlock(&cpufreq_lock);
exynos_target(policy, locking_frequency,
CPUFREQ_RELATION_H);
mutex_lock(&cpufreq_lock);
locking_frequency = temp;
}
frequency_locked = false;
break;
}
out:
mutex_unlock(&cpufreq_lock);
return NOTIFY_OK;
}
static struct notifier_block exynos_cpufreq_nb = {
.notifier_call = exynos_cpufreq_pm_notifier,
};
static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
policy->cur = policy->min = policy->max = exynos_getspeed(policy->cpu);
cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
locking_frequency = exynos_getspeed(0);
/* set the transition latency value */
policy->cpuinfo.transition_latency = 100000;
/*
* EXYNOS4 multi-core processors has 2 cores
* that the frequency cannot be set independently.
* Each cpu is bound to the same speed.
* So the affected cpu is all of the cpus.
*/
if (num_online_cpus() == 1) {
cpumask_copy(policy->related_cpus, cpu_possible_mask);
cpumask_copy(policy->cpus, cpu_online_mask);
} else {
cpumask_setall(policy->cpus);
}
return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table);
}
static struct cpufreq_driver exynos_driver = {
.flags = CPUFREQ_STICKY,
.verify = exynos_verify_speed,
.target = exynos_target,
.get = exynos_getspeed,
.init = exynos_cpufreq_cpu_init,
.name = "exynos_cpufreq",
#ifdef CONFIG_PM
.suspend = exynos_cpufreq_suspend,
.resume = exynos_cpufreq_resume,
#endif
};
static int __init exynos_cpufreq_init(void)
{
int ret = -EINVAL;
exynos_info = kzalloc(sizeof(struct exynos_dvfs_info), GFP_KERNEL);
if (!exynos_info)
return -ENOMEM;
if (soc_is_exynos4210())
ret = exynos4210_cpufreq_init(exynos_info);
else if (soc_is_exynos4212() || soc_is_exynos4412())
ret = exynos4x12_cpufreq_init(exynos_info);
else if (soc_is_exynos5250())
ret = exynos5250_cpufreq_init(exynos_info);
else
pr_err("%s: CPU type not found\n", __func__);
if (ret)
goto err_vdd_arm;
if (exynos_info->set_freq == NULL) {
pr_err("%s: No set_freq function (ERR)\n", __func__);
goto err_vdd_arm;
}
arm_regulator = regulator_get(NULL, "vdd_arm");
if (IS_ERR(arm_regulator)) {
pr_err("%s: failed to get resource vdd_arm\n", __func__);
goto err_vdd_arm;
}
register_pm_notifier(&exynos_cpufreq_nb);
if (cpufreq_register_driver(&exynos_driver)) {
pr_err("%s: failed to register cpufreq driver\n", __func__);
goto err_cpufreq;
}
return 0;
err_cpufreq:
unregister_pm_notifier(&exynos_cpufreq_nb);
if (!IS_ERR(arm_regulator))
regulator_put(arm_regulator);
err_vdd_arm:
kfree(exynos_info);
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
late_initcall(exynos_cpufreq_init);