swh:1:snp:38ae39f9fd01a4b0ef06fab5668b65bf4c2aca03
Tip revision: 8f3d9f354286745c751374f5f1fcafee6b3f3136 authored by Linus Torvalds on 12 April 2020, 19:35:55 UTC
Linux 5.7-rc1
Linux 5.7-rc1
Tip revision: 8f3d9f3
highbank-cpufreq.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Calxeda, Inc.
*
* This driver provides the clk notifier callbacks that are used when
* the cpufreq-dt driver changes to frequency to alert the highbank
* EnergyCore Management Engine (ECME) about the need to change
* voltage. The ECME interfaces with the actual voltage regulators.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/pl320-ipc.h>
#include <linux/platform_device.h>
#define HB_CPUFREQ_CHANGE_NOTE 0x80000001
#define HB_CPUFREQ_IPC_LEN 7
#define HB_CPUFREQ_VOLT_RETRIES 15
static int hb_voltage_change(unsigned int freq)
{
u32 msg[HB_CPUFREQ_IPC_LEN] = {HB_CPUFREQ_CHANGE_NOTE, freq / 1000000};
return pl320_ipc_transmit(msg);
}
static int hb_cpufreq_clk_notify(struct notifier_block *nb,
unsigned long action, void *hclk)
{
struct clk_notifier_data *clk_data = hclk;
int i = 0;
if (action == PRE_RATE_CHANGE) {
if (clk_data->new_rate > clk_data->old_rate)
while (hb_voltage_change(clk_data->new_rate))
if (i++ > HB_CPUFREQ_VOLT_RETRIES)
return NOTIFY_BAD;
} else if (action == POST_RATE_CHANGE) {
if (clk_data->new_rate < clk_data->old_rate)
while (hb_voltage_change(clk_data->new_rate))
if (i++ > HB_CPUFREQ_VOLT_RETRIES)
return NOTIFY_BAD;
}
return NOTIFY_DONE;
}
static struct notifier_block hb_cpufreq_clk_nb = {
.notifier_call = hb_cpufreq_clk_notify,
};
static int hb_cpufreq_driver_init(void)
{
struct platform_device_info devinfo = { .name = "cpufreq-dt", };
struct device *cpu_dev;
struct clk *cpu_clk;
struct device_node *np;
int ret;
if ((!of_machine_is_compatible("calxeda,highbank")) &&
(!of_machine_is_compatible("calxeda,ecx-2000")))
return -ENODEV;
cpu_dev = get_cpu_device(0);
if (!cpu_dev) {
pr_err("failed to get highbank cpufreq device\n");
return -ENODEV;
}
np = of_node_get(cpu_dev->of_node);
if (!np) {
pr_err("failed to find highbank cpufreq node\n");
return -ENOENT;
}
cpu_clk = clk_get(cpu_dev, NULL);
if (IS_ERR(cpu_clk)) {
ret = PTR_ERR(cpu_clk);
pr_err("failed to get cpu0 clock: %d\n", ret);
goto out_put_node;
}
ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb);
if (ret) {
pr_err("failed to register clk notifier: %d\n", ret);
goto out_put_node;
}
/* Instantiate cpufreq-dt */
platform_device_register_full(&devinfo);
out_put_node:
of_node_put(np);
return ret;
}
module_init(hb_cpufreq_driver_init);
MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
MODULE_LICENSE("GPL");