swh:1:snp:38ae39f9fd01a4b0ef06fab5668b65bf4c2aca03
Tip revision: 8f3d9f354286745c751374f5f1fcafee6b3f3136 authored by Linus Torvalds on 12 April 2020, 19:35:55 UTC
Linux 5.7-rc1
Linux 5.7-rc1
Tip revision: 8f3d9f3
imx-cpufreq-dt.c
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2019 NXP
*/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/slab.h>
#define OCOTP_CFG3_SPEED_GRADE_SHIFT 8
#define OCOTP_CFG3_SPEED_GRADE_MASK (0x3 << 8)
#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK (0xf << 8)
#define OCOTP_CFG3_MKT_SEGMENT_SHIFT 6
#define OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 6)
#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT 5
#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 5)
/* cpufreq-dt device registered by imx-cpufreq-dt */
static struct platform_device *cpufreq_dt_pdev;
static struct opp_table *cpufreq_opp_table;
static int imx_cpufreq_dt_probe(struct platform_device *pdev)
{
struct device *cpu_dev = get_cpu_device(0);
u32 cell_value, supported_hw[2];
int speed_grade, mkt_segment;
int ret;
if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL))
return -ENODEV;
ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
if (ret)
return ret;
if (of_machine_is_compatible("fsl,imx8mn") ||
of_machine_is_compatible("fsl,imx8mp"))
speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK)
>> OCOTP_CFG3_SPEED_GRADE_SHIFT;
else
speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK)
>> OCOTP_CFG3_SPEED_GRADE_SHIFT;
if (of_machine_is_compatible("fsl,imx8mp"))
mkt_segment = (cell_value & IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK)
>> IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT;
else
mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK)
>> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
/*
* Early samples without fuses written report "0 0" which may NOT
* match any OPP defined in DT. So clamp to minimum OPP defined in
* DT to avoid warning for "no OPPs".
*
* Applies to i.MX8M series SoCs.
*/
if (mkt_segment == 0 && speed_grade == 0) {
if (of_machine_is_compatible("fsl,imx8mm") ||
of_machine_is_compatible("fsl,imx8mq"))
speed_grade = 1;
if (of_machine_is_compatible("fsl,imx8mn") ||
of_machine_is_compatible("fsl,imx8mp"))
speed_grade = 0xb;
}
supported_hw[0] = BIT(speed_grade);
supported_hw[1] = BIT(mkt_segment);
dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n",
speed_grade, mkt_segment, supported_hw[0], supported_hw[1]);
cpufreq_opp_table = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2);
if (IS_ERR(cpufreq_opp_table)) {
ret = PTR_ERR(cpufreq_opp_table);
dev_err(&pdev->dev, "Failed to set supported opp: %d\n", ret);
return ret;
}
cpufreq_dt_pdev = platform_device_register_data(
&pdev->dev, "cpufreq-dt", -1, NULL, 0);
if (IS_ERR(cpufreq_dt_pdev)) {
dev_pm_opp_put_supported_hw(cpufreq_opp_table);
ret = PTR_ERR(cpufreq_dt_pdev);
dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
return ret;
}
return 0;
}
static int imx_cpufreq_dt_remove(struct platform_device *pdev)
{
platform_device_unregister(cpufreq_dt_pdev);
dev_pm_opp_put_supported_hw(cpufreq_opp_table);
return 0;
}
static struct platform_driver imx_cpufreq_dt_driver = {
.probe = imx_cpufreq_dt_probe,
.remove = imx_cpufreq_dt_remove,
.driver = {
.name = "imx-cpufreq-dt",
},
};
module_platform_driver(imx_cpufreq_dt_driver);
MODULE_ALIAS("platform:imx-cpufreq-dt");
MODULE_DESCRIPTION("Freescale i.MX cpufreq speed grading driver");
MODULE_LICENSE("GPL v2");