swh:1:snp:38ae39f9fd01a4b0ef06fab5668b65bf4c2aca03
Tip revision: d45331b00ddb179e291766617259261c112db872 authored by Linus Torvalds on 11 August 2019, 20:26:41 UTC
Linux 5.3-rc4
Linux 5.3-rc4
Tip revision: d45331b
mtu3_dr.c
// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_dr.c - dual role switch and host glue layer
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
*/
#include "mtu3.h"
#include "mtu3_dr.h"
#include "mtu3_debug.h"
#define USB2_PORT 2
#define USB3_PORT 3
enum mtu3_vbus_id_state {
MTU3_ID_FLOAT = 1,
MTU3_ID_GROUND,
MTU3_VBUS_OFF,
MTU3_VBUS_VALID,
};
static char *mailbox_state_string(enum mtu3_vbus_id_state state)
{
switch (state) {
case MTU3_ID_FLOAT:
return "ID_FLOAT";
case MTU3_ID_GROUND:
return "ID_GROUND";
case MTU3_VBUS_OFF:
return "VBUS_OFF";
case MTU3_VBUS_VALID:
return "VBUS_VALID";
default:
return "UNKNOWN";
}
}
static void toggle_opstate(struct ssusb_mtk *ssusb)
{
if (!ssusb->otg_switch.is_u3_drd) {
mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
}
}
/* only port0 supports dual-role mode */
static int ssusb_port0_switch(struct ssusb_mtk *ssusb,
int version, bool tohost)
{
void __iomem *ibase = ssusb->ippc_base;
u32 value;
dev_dbg(ssusb->dev, "%s (switch u%d port0 to %s)\n", __func__,
version, tohost ? "host" : "device");
if (version == USB2_PORT) {
/* 1. power off and disable u2 port0 */
value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
/* 2. power on, enable u2 port0 and select its mode */
value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
value = tohost ? (value | SSUSB_U2_PORT_HOST_SEL) :
(value & (~SSUSB_U2_PORT_HOST_SEL));
mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
} else {
/* 1. power off and disable u3 port0 */
value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
/* 2. power on, enable u3 port0 and select its mode */
value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
value = tohost ? (value | SSUSB_U3_PORT_HOST_SEL) :
(value & (~SSUSB_U3_PORT_HOST_SEL));
mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
}
return 0;
}
static void switch_port_to_host(struct ssusb_mtk *ssusb)
{
u32 check_clk = 0;
dev_dbg(ssusb->dev, "%s\n", __func__);
ssusb_port0_switch(ssusb, USB2_PORT, true);
if (ssusb->otg_switch.is_u3_drd) {
ssusb_port0_switch(ssusb, USB3_PORT, true);
check_clk = SSUSB_U3_MAC_RST_B_STS;
}
ssusb_check_clocks(ssusb, check_clk);
/* after all clocks are stable */
toggle_opstate(ssusb);
}
static void switch_port_to_device(struct ssusb_mtk *ssusb)
{
u32 check_clk = 0;
dev_dbg(ssusb->dev, "%s\n", __func__);
ssusb_port0_switch(ssusb, USB2_PORT, false);
if (ssusb->otg_switch.is_u3_drd) {
ssusb_port0_switch(ssusb, USB3_PORT, false);
check_clk = SSUSB_U3_MAC_RST_B_STS;
}
ssusb_check_clocks(ssusb, check_clk);
}
int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
{
struct ssusb_mtk *ssusb =
container_of(otg_sx, struct ssusb_mtk, otg_switch);
struct regulator *vbus = otg_sx->vbus;
int ret;
/* vbus is optional */
if (!vbus)
return 0;
dev_dbg(ssusb->dev, "%s: turn %s\n", __func__, is_on ? "on" : "off");
if (is_on) {
ret = regulator_enable(vbus);
if (ret) {
dev_err(ssusb->dev, "vbus regulator enable failed\n");
return ret;
}
} else {
regulator_disable(vbus);
}
return 0;
}
/*
* switch to host: -> MTU3_VBUS_OFF --> MTU3_ID_GROUND
* switch to device: -> MTU3_ID_FLOAT --> MTU3_VBUS_VALID
*/
static void ssusb_set_mailbox(struct otg_switch_mtk *otg_sx,
enum mtu3_vbus_id_state status)
{
struct ssusb_mtk *ssusb =
container_of(otg_sx, struct ssusb_mtk, otg_switch);
struct mtu3 *mtu = ssusb->u3d;
dev_dbg(ssusb->dev, "mailbox %s\n", mailbox_state_string(status));
mtu3_dbg_trace(ssusb->dev, "mailbox %s", mailbox_state_string(status));
switch (status) {
case MTU3_ID_GROUND:
switch_port_to_host(ssusb);
ssusb_set_vbus(otg_sx, 1);
ssusb->is_host = true;
break;
case MTU3_ID_FLOAT:
ssusb->is_host = false;
ssusb_set_vbus(otg_sx, 0);
switch_port_to_device(ssusb);
break;
case MTU3_VBUS_OFF:
mtu3_stop(mtu);
pm_relax(ssusb->dev);
break;
case MTU3_VBUS_VALID:
/* avoid suspend when works as device */
pm_stay_awake(ssusb->dev);
mtu3_start(mtu);
break;
default:
dev_err(ssusb->dev, "invalid state\n");
}
}
static void ssusb_id_work(struct work_struct *work)
{
struct otg_switch_mtk *otg_sx =
container_of(work, struct otg_switch_mtk, id_work);
if (otg_sx->id_event)
ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
else
ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
}
static void ssusb_vbus_work(struct work_struct *work)
{
struct otg_switch_mtk *otg_sx =
container_of(work, struct otg_switch_mtk, vbus_work);
if (otg_sx->vbus_event)
ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
else
ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
}
/*
* @ssusb_id_notifier is called in atomic context, but @ssusb_set_mailbox
* may sleep, so use work queue here
*/
static int ssusb_id_notifier(struct notifier_block *nb,
unsigned long event, void *ptr)
{
struct otg_switch_mtk *otg_sx =
container_of(nb, struct otg_switch_mtk, id_nb);
otg_sx->id_event = event;
schedule_work(&otg_sx->id_work);
return NOTIFY_DONE;
}
static int ssusb_vbus_notifier(struct notifier_block *nb,
unsigned long event, void *ptr)
{
struct otg_switch_mtk *otg_sx =
container_of(nb, struct otg_switch_mtk, vbus_nb);
otg_sx->vbus_event = event;
schedule_work(&otg_sx->vbus_work);
return NOTIFY_DONE;
}
static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx)
{
struct ssusb_mtk *ssusb =
container_of(otg_sx, struct ssusb_mtk, otg_switch);
struct extcon_dev *edev = otg_sx->edev;
int ret;
/* extcon is optional */
if (!edev)
return 0;
otg_sx->vbus_nb.notifier_call = ssusb_vbus_notifier;
ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB,
&otg_sx->vbus_nb);
if (ret < 0) {
dev_err(ssusb->dev, "failed to register notifier for USB\n");
return ret;
}
otg_sx->id_nb.notifier_call = ssusb_id_notifier;
ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST,
&otg_sx->id_nb);
if (ret < 0) {
dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n");
return ret;
}
dev_dbg(ssusb->dev, "EXTCON_USB: %d, EXTCON_USB_HOST: %d\n",
extcon_get_state(edev, EXTCON_USB),
extcon_get_state(edev, EXTCON_USB_HOST));
/* default as host, switch to device mode if needed */
if (extcon_get_state(edev, EXTCON_USB_HOST) == false)
ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
if (extcon_get_state(edev, EXTCON_USB) == true)
ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
return 0;
}
/*
* We provide an interface via debugfs to switch between host and device modes
* depending on user input.
* This is useful in special cases, such as uses TYPE-A receptacle but also
* wants to support dual-role mode.
*/
void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
if (to_host) {
ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
} else {
ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
}
}
void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
enum mtu3_dr_force_mode mode)
{
u32 value;
value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
switch (mode) {
case MTU3_DR_FORCE_DEVICE:
value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
break;
case MTU3_DR_FORCE_HOST:
value |= SSUSB_U2_PORT_FORCE_IDDIG;
value &= ~SSUSB_U2_PORT_RG_IDDIG;
break;
case MTU3_DR_FORCE_NONE:
value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
break;
default:
return;
}
mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
}
int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
int ret = 0;
INIT_WORK(&otg_sx->id_work, ssusb_id_work);
INIT_WORK(&otg_sx->vbus_work, ssusb_vbus_work);
if (otg_sx->manual_drd_enabled)
ssusb_dr_debugfs_init(ssusb);
else
ret = ssusb_extcon_register(otg_sx);
return ret;
}
void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
cancel_work_sync(&otg_sx->id_work);
cancel_work_sync(&otg_sx->vbus_work);
}