swh:1:snp:3c665ee4f67729f27f2e40193ab88e7298cf0fef
Tip revision: 22763c5cf3690a681551162c15d34d935308c8d7 authored by Linus Torvalds on 03 December 2009, 03:51:21 UTC
Linux 2.6.32
Linux 2.6.32
Tip revision: 22763c5
kgdb.c
/*
* SuperH KGDB support
*
* Copyright (C) 2008 Paul Mundt
*
* Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kgdb.h>
#include <linux/kdebug.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
/* Macros for single step instruction identification */
#define OPCODE_BT(op) (((op) & 0xff00) == 0x8900)
#define OPCODE_BF(op) (((op) & 0xff00) == 0x8b00)
#define OPCODE_BTF_DISP(op) (((op) & 0x80) ? (((op) | 0xffffff80) << 1) : \
(((op) & 0x7f ) << 1))
#define OPCODE_BFS(op) (((op) & 0xff00) == 0x8f00)
#define OPCODE_BTS(op) (((op) & 0xff00) == 0x8d00)
#define OPCODE_BRA(op) (((op) & 0xf000) == 0xa000)
#define OPCODE_BRA_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
(((op) & 0x7ff) << 1))
#define OPCODE_BRAF(op) (((op) & 0xf0ff) == 0x0023)
#define OPCODE_BRAF_REG(op) (((op) & 0x0f00) >> 8)
#define OPCODE_BSR(op) (((op) & 0xf000) == 0xb000)
#define OPCODE_BSR_DISP(op) (((op) & 0x800) ? (((op) | 0xfffff800) << 1) : \
(((op) & 0x7ff) << 1))
#define OPCODE_BSRF(op) (((op) & 0xf0ff) == 0x0003)
#define OPCODE_BSRF_REG(op) (((op) >> 8) & 0xf)
#define OPCODE_JMP(op) (((op) & 0xf0ff) == 0x402b)
#define OPCODE_JMP_REG(op) (((op) >> 8) & 0xf)
#define OPCODE_JSR(op) (((op) & 0xf0ff) == 0x400b)
#define OPCODE_JSR_REG(op) (((op) >> 8) & 0xf)
#define OPCODE_RTS(op) ((op) == 0xb)
#define OPCODE_RTE(op) ((op) == 0x2b)
#define SR_T_BIT_MASK 0x1
#define STEP_OPCODE 0xc33d
/* Calculate the new address for after a step */
static short *get_step_address(struct pt_regs *linux_regs)
{
insn_size_t op = __raw_readw(linux_regs->pc);
long addr;
/* BT */
if (OPCODE_BT(op)) {
if (linux_regs->sr & SR_T_BIT_MASK)
addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
else
addr = linux_regs->pc + 2;
}
/* BTS */
else if (OPCODE_BTS(op)) {
if (linux_regs->sr & SR_T_BIT_MASK)
addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
else
addr = linux_regs->pc + 4; /* Not in delay slot */
}
/* BF */
else if (OPCODE_BF(op)) {
if (!(linux_regs->sr & SR_T_BIT_MASK))
addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
else
addr = linux_regs->pc + 2;
}
/* BFS */
else if (OPCODE_BFS(op)) {
if (!(linux_regs->sr & SR_T_BIT_MASK))
addr = linux_regs->pc + 4 + OPCODE_BTF_DISP(op);
else
addr = linux_regs->pc + 4; /* Not in delay slot */
}
/* BRA */
else if (OPCODE_BRA(op))
addr = linux_regs->pc + 4 + OPCODE_BRA_DISP(op);
/* BRAF */
else if (OPCODE_BRAF(op))
addr = linux_regs->pc + 4
+ linux_regs->regs[OPCODE_BRAF_REG(op)];
/* BSR */
else if (OPCODE_BSR(op))
addr = linux_regs->pc + 4 + OPCODE_BSR_DISP(op);
/* BSRF */
else if (OPCODE_BSRF(op))
addr = linux_regs->pc + 4
+ linux_regs->regs[OPCODE_BSRF_REG(op)];
/* JMP */
else if (OPCODE_JMP(op))
addr = linux_regs->regs[OPCODE_JMP_REG(op)];
/* JSR */
else if (OPCODE_JSR(op))
addr = linux_regs->regs[OPCODE_JSR_REG(op)];
/* RTS */
else if (OPCODE_RTS(op))
addr = linux_regs->pr;
/* RTE */
else if (OPCODE_RTE(op))
addr = linux_regs->regs[15];
/* Other */
else
addr = linux_regs->pc + instruction_size(op);
flush_icache_range(addr, addr + instruction_size(op));
return (short *)addr;
}
/*
* Replace the instruction immediately after the current instruction
* (i.e. next in the expected flow of control) with a trap instruction,
* so that returning will cause only a single instruction to be executed.
* Note that this model is slightly broken for instructions with delay
* slots (e.g. B[TF]S, BSR, BRA etc), where both the branch and the
* instruction in the delay slot will be executed.
*/
static unsigned long stepped_address;
static insn_size_t stepped_opcode;
static void do_single_step(struct pt_regs *linux_regs)
{
/* Determine where the target instruction will send us to */
unsigned short *addr = get_step_address(linux_regs);
stepped_address = (int)addr;
/* Replace it */
stepped_opcode = __raw_readw((long)addr);
*addr = STEP_OPCODE;
/* Flush and return */
flush_icache_range((long)addr, (long)addr +
instruction_size(stepped_opcode));
}
/* Undo a single step */
static void undo_single_step(struct pt_regs *linux_regs)
{
/* If we have stepped, put back the old instruction */
/* Use stepped_address in case we stopped elsewhere */
if (stepped_opcode != 0) {
__raw_writew(stepped_opcode, stepped_address);
flush_icache_range(stepped_address, stepped_address + 2);
}
stepped_opcode = 0;
}
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
int i;
for (i = 0; i < 16; i++)
gdb_regs[GDB_R0 + i] = regs->regs[i];
gdb_regs[GDB_PC] = regs->pc;
gdb_regs[GDB_PR] = regs->pr;
gdb_regs[GDB_SR] = regs->sr;
gdb_regs[GDB_GBR] = regs->gbr;
gdb_regs[GDB_MACH] = regs->mach;
gdb_regs[GDB_MACL] = regs->macl;
__asm__ __volatile__ ("stc vbr, %0" : "=r" (gdb_regs[GDB_VBR]));
}
void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
int i;
for (i = 0; i < 16; i++)
regs->regs[GDB_R0 + i] = gdb_regs[GDB_R0 + i];
regs->pc = gdb_regs[GDB_PC];
regs->pr = gdb_regs[GDB_PR];
regs->sr = gdb_regs[GDB_SR];
regs->gbr = gdb_regs[GDB_GBR];
regs->mach = gdb_regs[GDB_MACH];
regs->macl = gdb_regs[GDB_MACL];
}
void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
{
gdb_regs[GDB_R15] = p->thread.sp;
gdb_regs[GDB_PC] = p->thread.pc;
}
int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
char *remcomInBuffer, char *remcomOutBuffer,
struct pt_regs *linux_regs)
{
unsigned long addr;
char *ptr;
/* Undo any stepping we may have done */
undo_single_step(linux_regs);
switch (remcomInBuffer[0]) {
case 'c':
case 's':
/* try to read optional parameter, pc unchanged if no parm */
ptr = &remcomInBuffer[1];
if (kgdb_hex2long(&ptr, &addr))
linux_regs->pc = addr;
case 'D':
case 'k':
atomic_set(&kgdb_cpu_doing_single_step, -1);
if (remcomInBuffer[0] == 's') {
do_single_step(linux_regs);
kgdb_single_step = 1;
atomic_set(&kgdb_cpu_doing_single_step,
raw_smp_processor_id());
}
return 0;
}
/* this means that we do not want to exit from the handler: */
return -1;
}
/*
* The primary entry points for the kgdb debug trap table entries.
*/
BUILD_TRAP_HANDLER(singlestep)
{
unsigned long flags;
TRAP_HANDLER_DECL;
local_irq_save(flags);
regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
local_irq_restore(flags);
}
BUILD_TRAP_HANDLER(breakpoint)
{
unsigned long flags;
TRAP_HANDLER_DECL;
local_irq_save(flags);
kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
local_irq_restore(flags);
}
int kgdb_arch_init(void)
{
return 0;
}
void kgdb_arch_exit(void)
{
}
struct kgdb_arch arch_kgdb_ops = {
/* Breakpoint instruction: trapa #0x3c */
#ifdef CONFIG_CPU_LITTLE_ENDIAN
.gdb_bpt_instr = { 0x3c, 0xc3 },
#else
.gdb_bpt_instr = { 0xc3, 0x3c },
#endif
};