swh:1:snp:3c665ee4f67729f27f2e40193ab88e7298cf0fef
Tip revision: 29594404d7fe73cd80eaa4ee8c43dcc53970c60e authored by Linus Torvalds on 11 December 2012, 03:30:57 UTC
Linux 3.7
Linux 3.7
Tip revision: 2959440
radio-aimslab.c
/*
* AimsLab RadioTrack (aka RadioVeveal) driver
*
* Copyright 1997 M. Kirkwood
*
* Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
* Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
* Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
*
* Notes on the hardware (reverse engineered from other peoples'
* reverse engineering of AIMS' code :-)
*
* Frequency control is done digitally -- ie out(port,encodefreq(95.8));
*
* The signal strength query is unsurprisingly inaccurate. And it seems
* to indicate that (on my card, at least) the frequency setting isn't
* too great. (I have to tune up .025MHz from what the freq should be
* to get a report that the thing is tuned.)
*
* Volume control is (ugh) analogue:
* out(port, start_increasing_volume);
* wait(a_wee_while);
* out(port, stop_changing_the_volume);
*
* Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
*/
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
#include <linux/delay.h> /* msleep */
#include <linux/videodev2.h> /* kernel radio structs */
#include <linux/io.h> /* outb, outb_p */
#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-ctrls.h>
#include "radio-isa.h"
#include "lm7000.h"
MODULE_AUTHOR("M. Kirkwood");
MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card.");
MODULE_LICENSE("GPL");
MODULE_VERSION("1.0.0");
#ifndef CONFIG_RADIO_RTRACK_PORT
#define CONFIG_RADIO_RTRACK_PORT -1
#endif
#define RTRACK_MAX 2
static int io[RTRACK_MAX] = { [0] = CONFIG_RADIO_RTRACK_PORT,
[1 ... (RTRACK_MAX - 1)] = -1 };
static int radio_nr[RTRACK_MAX] = { [0 ... (RTRACK_MAX - 1)] = -1 };
module_param_array(io, int, NULL, 0444);
MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)");
module_param_array(radio_nr, int, NULL, 0444);
MODULE_PARM_DESC(radio_nr, "Radio device numbers");
struct rtrack {
struct radio_isa_card isa;
int curvol;
};
static struct radio_isa_card *rtrack_alloc(void)
{
struct rtrack *rt = kzalloc(sizeof(struct rtrack), GFP_KERNEL);
if (rt)
rt->curvol = 0xff;
return rt ? &rt->isa : NULL;
}
#define AIMS_BIT_TUN_CE (1 << 0)
#define AIMS_BIT_TUN_CLK (1 << 1)
#define AIMS_BIT_TUN_DATA (1 << 2)
#define AIMS_BIT_VOL_CE (1 << 3)
#define AIMS_BIT_TUN_STRQ (1 << 4)
/* bit 5 is not connected */
#define AIMS_BIT_VOL_UP (1 << 6) /* active low */
#define AIMS_BIT_VOL_DN (1 << 7) /* active low */
void rtrack_set_pins(void *handle, u8 pins)
{
struct radio_isa_card *isa = handle;
struct rtrack *rt = container_of(isa, struct rtrack, isa);
u8 bits = AIMS_BIT_VOL_DN | AIMS_BIT_VOL_UP | AIMS_BIT_TUN_STRQ;
if (!v4l2_ctrl_g_ctrl(rt->isa.mute))
bits |= AIMS_BIT_VOL_CE;
if (pins & LM7000_DATA)
bits |= AIMS_BIT_TUN_DATA;
if (pins & LM7000_CLK)
bits |= AIMS_BIT_TUN_CLK;
if (pins & LM7000_CE)
bits |= AIMS_BIT_TUN_CE;
outb_p(bits, rt->isa.io);
}
static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq)
{
lm7000_set_freq(freq, isa, rtrack_set_pins);
return 0;
}
static u32 rtrack_g_signal(struct radio_isa_card *isa)
{
/* bit set = no signal present */
return 0xffff * !(inb(isa->io) & 2);
}
static int rtrack_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
{
struct rtrack *rt = container_of(isa, struct rtrack, isa);
int curvol = rt->curvol;
if (mute) {
outb(0xd0, isa->io); /* volume steady + sigstr + off */
return 0;
}
if (vol == 0) { /* volume = 0 means mute the card */
outb(0x48, isa->io); /* volume down but still "on" */
msleep(curvol * 3); /* make sure it's totally down */
} else if (curvol < vol) {
outb(0x98, isa->io); /* volume up + sigstr + on */
for (; curvol < vol; curvol++)
udelay(3000);
} else if (curvol > vol) {
outb(0x58, isa->io); /* volume down + sigstr + on */
for (; curvol > vol; curvol--)
udelay(3000);
}
outb(0xd8, isa->io); /* volume steady + sigstr + on */
rt->curvol = vol;
return 0;
}
/* Mute card - prevents noisy bootups */
static int rtrack_initialize(struct radio_isa_card *isa)
{
/* this ensures that the volume is all the way up */
outb(0x90, isa->io); /* volume up but still "on" */
msleep(3000); /* make sure it's totally up */
outb(0xc0, isa->io); /* steady volume, mute card */
return 0;
}
static const struct radio_isa_ops rtrack_ops = {
.alloc = rtrack_alloc,
.init = rtrack_initialize,
.s_mute_volume = rtrack_s_mute_volume,
.s_frequency = rtrack_s_frequency,
.g_signal = rtrack_g_signal,
};
static const int rtrack_ioports[] = { 0x20f, 0x30f };
static struct radio_isa_driver rtrack_driver = {
.driver = {
.match = radio_isa_match,
.probe = radio_isa_probe,
.remove = radio_isa_remove,
.driver = {
.name = "radio-aimslab",
},
},
.io_params = io,
.radio_nr_params = radio_nr,
.io_ports = rtrack_ioports,
.num_of_io_ports = ARRAY_SIZE(rtrack_ioports),
.region_size = 2,
.card = "AIMSlab RadioTrack/RadioReveal",
.ops = &rtrack_ops,
.has_stereo = true,
.max_volume = 0xff,
};
static int __init rtrack_init(void)
{
return isa_register_driver(&rtrack_driver.driver, RTRACK_MAX);
}
static void __exit rtrack_exit(void)
{
isa_unregister_driver(&rtrack_driver.driver);
}
module_init(rtrack_init);
module_exit(rtrack_exit);