swh:1:snp:3c665ee4f67729f27f2e40193ab88e7298cf0fef
Tip revision: 18558cae0272f8fd9647e69d3fec1565a7949865 authored by Linus Torvalds on 14 February 2016, 21:05:20 UTC
Linux 4.5-rc4
Linux 4.5-rc4
Tip revision: 18558ca
phy-tusb1210.c
/**
* tusb1210.c - TUSB1210 USB ULPI PHY driver
*
* Copyright (C) 2015 Intel Corporation
*
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/ulpi/driver.h>
#include <linux/gpio/consumer.h>
#include "ulpi_phy.h"
#define TUSB1210_VENDOR_SPECIFIC2 0x80
#define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT 0
#define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT 4
#define TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT 6
struct tusb1210 {
struct ulpi *ulpi;
struct phy *phy;
struct gpio_desc *gpio_reset;
struct gpio_desc *gpio_cs;
u8 vendor_specific2;
};
static int tusb1210_power_on(struct phy *phy)
{
struct tusb1210 *tusb = phy_get_drvdata(phy);
gpiod_set_value_cansleep(tusb->gpio_reset, 1);
gpiod_set_value_cansleep(tusb->gpio_cs, 1);
/* Restore the optional eye diagram optimization value */
if (tusb->vendor_specific2)
ulpi_write(tusb->ulpi, TUSB1210_VENDOR_SPECIFIC2,
tusb->vendor_specific2);
return 0;
}
static int tusb1210_power_off(struct phy *phy)
{
struct tusb1210 *tusb = phy_get_drvdata(phy);
gpiod_set_value_cansleep(tusb->gpio_reset, 0);
gpiod_set_value_cansleep(tusb->gpio_cs, 0);
return 0;
}
static const struct phy_ops phy_ops = {
.power_on = tusb1210_power_on,
.power_off = tusb1210_power_off,
.owner = THIS_MODULE,
};
static int tusb1210_probe(struct ulpi *ulpi)
{
struct tusb1210 *tusb;
u8 val, reg;
tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL);
if (!tusb)
return -ENOMEM;
tusb->gpio_reset = devm_gpiod_get_optional(&ulpi->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(tusb->gpio_reset))
return PTR_ERR(tusb->gpio_reset);
gpiod_set_value_cansleep(tusb->gpio_reset, 1);
tusb->gpio_cs = devm_gpiod_get_optional(&ulpi->dev, "cs",
GPIOD_OUT_LOW);
if (IS_ERR(tusb->gpio_cs))
return PTR_ERR(tusb->gpio_cs);
gpiod_set_value_cansleep(tusb->gpio_cs, 1);
/*
* VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye
* diagram optimization and DP/DM swap.
*/
/* High speed output drive strength configuration */
device_property_read_u8(&ulpi->dev, "ihstx", &val);
reg = val << TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT;
/* High speed output impedance configuration */
device_property_read_u8(&ulpi->dev, "zhsdrv", &val);
reg |= val << TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT;
/* DP/DM swap control */
device_property_read_u8(&ulpi->dev, "datapolarity", &val);
reg |= val << TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT;
if (reg) {
ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg);
tusb->vendor_specific2 = reg;
}
tusb->phy = ulpi_phy_create(ulpi, &phy_ops);
if (IS_ERR(tusb->phy))
return PTR_ERR(tusb->phy);
tusb->ulpi = ulpi;
phy_set_drvdata(tusb->phy, tusb);
ulpi_set_drvdata(ulpi, tusb);
return 0;
}
static void tusb1210_remove(struct ulpi *ulpi)
{
struct tusb1210 *tusb = ulpi_get_drvdata(ulpi);
ulpi_phy_destroy(ulpi, tusb->phy);
}
#define TI_VENDOR_ID 0x0451
static const struct ulpi_device_id tusb1210_ulpi_id[] = {
{ TI_VENDOR_ID, 0x1507, },
{ },
};
MODULE_DEVICE_TABLE(ulpi, tusb1210_ulpi_id);
static struct ulpi_driver tusb1210_driver = {
.id_table = tusb1210_ulpi_id,
.probe = tusb1210_probe,
.remove = tusb1210_remove,
.driver = {
.name = "tusb1210",
.owner = THIS_MODULE,
},
};
module_ulpi_driver(tusb1210_driver);
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("TUSB1210 ULPI PHY driver");