swh:1:snp:3c665ee4f67729f27f2e40193ab88e7298cf0fef
Tip revision: f7644cbfcdf03528f0f450f3940c4985b2291f49 authored by Linus Torvalds on 09 August 2015, 19:54:30 UTC
Linux 4.2-rc6
Linux 4.2-rc6
Tip revision: f7644cb
vmwgfx_drm.h
/**************************************************************************
*
* Copyright © 2009 VMware, Inc., Palo Alto, CA., USA
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
**************************************************************************/
#ifndef __VMWGFX_DRM_H__
#define __VMWGFX_DRM_H__
#ifndef __KERNEL__
#include <drm/drm.h>
#endif
#define DRM_VMW_MAX_SURFACE_FACES 6
#define DRM_VMW_MAX_MIP_LEVELS 24
#define DRM_VMW_GET_PARAM 0
#define DRM_VMW_ALLOC_DMABUF 1
#define DRM_VMW_UNREF_DMABUF 2
#define DRM_VMW_CURSOR_BYPASS 3
/* guarded by DRM_VMW_PARAM_NUM_STREAMS != 0*/
#define DRM_VMW_CONTROL_STREAM 4
#define DRM_VMW_CLAIM_STREAM 5
#define DRM_VMW_UNREF_STREAM 6
/* guarded by DRM_VMW_PARAM_3D == 1 */
#define DRM_VMW_CREATE_CONTEXT 7
#define DRM_VMW_UNREF_CONTEXT 8
#define DRM_VMW_CREATE_SURFACE 9
#define DRM_VMW_UNREF_SURFACE 10
#define DRM_VMW_REF_SURFACE 11
#define DRM_VMW_EXECBUF 12
#define DRM_VMW_GET_3D_CAP 13
#define DRM_VMW_FENCE_WAIT 14
#define DRM_VMW_FENCE_SIGNALED 15
#define DRM_VMW_FENCE_UNREF 16
#define DRM_VMW_FENCE_EVENT 17
#define DRM_VMW_PRESENT 18
#define DRM_VMW_PRESENT_READBACK 19
#define DRM_VMW_UPDATE_LAYOUT 20
#define DRM_VMW_CREATE_SHADER 21
#define DRM_VMW_UNREF_SHADER 22
#define DRM_VMW_GB_SURFACE_CREATE 23
#define DRM_VMW_GB_SURFACE_REF 24
#define DRM_VMW_SYNCCPU 25
/*************************************************************************/
/**
* DRM_VMW_GET_PARAM - get device information.
*
* DRM_VMW_PARAM_FIFO_OFFSET:
* Offset to use to map the first page of the FIFO read-only.
* The fifo is mapped using the mmap() system call on the drm device.
*
* DRM_VMW_PARAM_OVERLAY_IOCTL:
* Does the driver support the overlay ioctl.
*/
#define DRM_VMW_PARAM_NUM_STREAMS 0
#define DRM_VMW_PARAM_NUM_FREE_STREAMS 1
#define DRM_VMW_PARAM_3D 2
#define DRM_VMW_PARAM_HW_CAPS 3
#define DRM_VMW_PARAM_FIFO_CAPS 4
#define DRM_VMW_PARAM_MAX_FB_SIZE 5
#define DRM_VMW_PARAM_FIFO_HW_VERSION 6
#define DRM_VMW_PARAM_MAX_SURF_MEMORY 7
#define DRM_VMW_PARAM_3D_CAPS_SIZE 8
#define DRM_VMW_PARAM_MAX_MOB_MEMORY 9
#define DRM_VMW_PARAM_MAX_MOB_SIZE 10
/**
* enum drm_vmw_handle_type - handle type for ref ioctls
*
*/
enum drm_vmw_handle_type {
DRM_VMW_HANDLE_LEGACY = 0,
DRM_VMW_HANDLE_PRIME = 1
};
/**
* struct drm_vmw_getparam_arg
*
* @value: Returned value. //Out
* @param: Parameter to query. //In.
*
* Argument to the DRM_VMW_GET_PARAM Ioctl.
*/
struct drm_vmw_getparam_arg {
uint64_t value;
uint32_t param;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_CREATE_CONTEXT - Create a host context.
*
* Allocates a device unique context id, and queues a create context command
* for the host. Does not wait for host completion.
*/
/**
* struct drm_vmw_context_arg
*
* @cid: Device unique context ID.
*
* Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl.
* Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl.
*/
struct drm_vmw_context_arg {
int32_t cid;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_UNREF_CONTEXT - Create a host context.
*
* Frees a global context id, and queues a destroy host command for the host.
* Does not wait for host completion. The context ID can be used directly
* in the command stream and shows up as the same context ID on the host.
*/
/*************************************************************************/
/**
* DRM_VMW_CREATE_SURFACE - Create a host suface.
*
* Allocates a device unique surface id, and queues a create surface command
* for the host. Does not wait for host completion. The surface ID can be
* used directly in the command stream and shows up as the same surface
* ID on the host.
*/
/**
* struct drm_wmv_surface_create_req
*
* @flags: Surface flags as understood by the host.
* @format: Surface format as understood by the host.
* @mip_levels: Number of mip levels for each face.
* An unused face should have 0 encoded.
* @size_addr: Address of a user-space array of sruct drm_vmw_size
* cast to an uint64_t for 32-64 bit compatibility.
* The size of the array should equal the total number of mipmap levels.
* @shareable: Boolean whether other clients (as identified by file descriptors)
* may reference this surface.
* @scanout: Boolean whether the surface is intended to be used as a
* scanout.
*
* Input data to the DRM_VMW_CREATE_SURFACE Ioctl.
* Output data from the DRM_VMW_REF_SURFACE Ioctl.
*/
struct drm_vmw_surface_create_req {
uint32_t flags;
uint32_t format;
uint32_t mip_levels[DRM_VMW_MAX_SURFACE_FACES];
uint64_t size_addr;
int32_t shareable;
int32_t scanout;
};
/**
* struct drm_wmv_surface_arg
*
* @sid: Surface id of created surface or surface to destroy or reference.
* @handle_type: Handle type for DRM_VMW_REF_SURFACE Ioctl.
*
* Output data from the DRM_VMW_CREATE_SURFACE Ioctl.
* Input argument to the DRM_VMW_UNREF_SURFACE Ioctl.
* Input argument to the DRM_VMW_REF_SURFACE Ioctl.
*/
struct drm_vmw_surface_arg {
int32_t sid;
enum drm_vmw_handle_type handle_type;
};
/**
* struct drm_vmw_size ioctl.
*
* @width - mip level width
* @height - mip level height
* @depth - mip level depth
*
* Description of a mip level.
* Input data to the DRM_WMW_CREATE_SURFACE Ioctl.
*/
struct drm_vmw_size {
uint32_t width;
uint32_t height;
uint32_t depth;
uint32_t pad64;
};
/**
* union drm_vmw_surface_create_arg
*
* @rep: Output data as described above.
* @req: Input data as described above.
*
* Argument to the DRM_VMW_CREATE_SURFACE Ioctl.
*/
union drm_vmw_surface_create_arg {
struct drm_vmw_surface_arg rep;
struct drm_vmw_surface_create_req req;
};
/*************************************************************************/
/**
* DRM_VMW_REF_SURFACE - Reference a host surface.
*
* Puts a reference on a host surface with a give sid, as previously
* returned by the DRM_VMW_CREATE_SURFACE ioctl.
* A reference will make sure the surface isn't destroyed while we hold
* it and will allow the calling client to use the surface ID in the command
* stream.
*
* On successful return, the Ioctl returns the surface information given
* in the DRM_VMW_CREATE_SURFACE ioctl.
*/
/**
* union drm_vmw_surface_reference_arg
*
* @rep: Output data as described above.
* @req: Input data as described above.
*
* Argument to the DRM_VMW_REF_SURFACE Ioctl.
*/
union drm_vmw_surface_reference_arg {
struct drm_vmw_surface_create_req rep;
struct drm_vmw_surface_arg req;
};
/*************************************************************************/
/**
* DRM_VMW_UNREF_SURFACE - Unreference a host surface.
*
* Clear a reference previously put on a host surface.
* When all references are gone, including the one implicitly placed
* on creation,
* a destroy surface command will be queued for the host.
* Does not wait for completion.
*/
/*************************************************************************/
/**
* DRM_VMW_EXECBUF
*
* Submit a command buffer for execution on the host, and return a
* fence seqno that when signaled, indicates that the command buffer has
* executed.
*/
/**
* struct drm_vmw_execbuf_arg
*
* @commands: User-space address of a command buffer cast to an uint64_t.
* @command-size: Size in bytes of the command buffer.
* @throttle-us: Sleep until software is less than @throttle_us
* microseconds ahead of hardware. The driver may round this value
* to the nearest kernel tick.
* @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an
* uint64_t.
* @version: Allows expanding the execbuf ioctl parameters without breaking
* backwards compatibility, since user-space will always tell the kernel
* which version it uses.
* @flags: Execbuf flags. None currently.
*
* Argument to the DRM_VMW_EXECBUF Ioctl.
*/
#define DRM_VMW_EXECBUF_VERSION 1
struct drm_vmw_execbuf_arg {
uint64_t commands;
uint32_t command_size;
uint32_t throttle_us;
uint64_t fence_rep;
uint32_t version;
uint32_t flags;
};
/**
* struct drm_vmw_fence_rep
*
* @handle: Fence object handle for fence associated with a command submission.
* @mask: Fence flags relevant for this fence object.
* @seqno: Fence sequence number in fifo. A fence object with a lower
* seqno will signal the EXEC flag before a fence object with a higher
* seqno. This can be used by user-space to avoid kernel calls to determine
* whether a fence has signaled the EXEC flag. Note that @seqno will
* wrap at 32-bit.
* @passed_seqno: The highest seqno number processed by the hardware
* so far. This can be used to mark user-space fence objects as signaled, and
* to determine whether a fence seqno might be stale.
* @error: This member should've been set to -EFAULT on submission.
* The following actions should be take on completion:
* error == -EFAULT: Fence communication failed. The host is synchronized.
* Use the last fence id read from the FIFO fence register.
* error != 0 && error != -EFAULT:
* Fence submission failed. The host is synchronized. Use the fence_seq member.
* error == 0: All is OK, The host may not be synchronized.
* Use the fence_seq member.
*
* Input / Output data to the DRM_VMW_EXECBUF Ioctl.
*/
struct drm_vmw_fence_rep {
uint32_t handle;
uint32_t mask;
uint32_t seqno;
uint32_t passed_seqno;
uint32_t pad64;
int32_t error;
};
/*************************************************************************/
/**
* DRM_VMW_ALLOC_DMABUF
*
* Allocate a DMA buffer that is visible also to the host.
* NOTE: The buffer is
* identified by a handle and an offset, which are private to the guest, but
* useable in the command stream. The guest kernel may translate these
* and patch up the command stream accordingly. In the future, the offset may
* be zero at all times, or it may disappear from the interface before it is
* fixed.
*
* The DMA buffer may stay user-space mapped in the guest at all times,
* and is thus suitable for sub-allocation.
*
* DMA buffers are mapped using the mmap() syscall on the drm device.
*/
/**
* struct drm_vmw_alloc_dmabuf_req
*
* @size: Required minimum size of the buffer.
*
* Input data to the DRM_VMW_ALLOC_DMABUF Ioctl.
*/
struct drm_vmw_alloc_dmabuf_req {
uint32_t size;
uint32_t pad64;
};
/**
* struct drm_vmw_dmabuf_rep
*
* @map_handle: Offset to use in the mmap() call used to map the buffer.
* @handle: Handle unique to this buffer. Used for unreferencing.
* @cur_gmr_id: GMR id to use in the command stream when this buffer is
* referenced. See not above.
* @cur_gmr_offset: Offset to use in the command stream when this buffer is
* referenced. See note above.
*
* Output data from the DRM_VMW_ALLOC_DMABUF Ioctl.
*/
struct drm_vmw_dmabuf_rep {
uint64_t map_handle;
uint32_t handle;
uint32_t cur_gmr_id;
uint32_t cur_gmr_offset;
uint32_t pad64;
};
/**
* union drm_vmw_dmabuf_arg
*
* @req: Input data as described above.
* @rep: Output data as described above.
*
* Argument to the DRM_VMW_ALLOC_DMABUF Ioctl.
*/
union drm_vmw_alloc_dmabuf_arg {
struct drm_vmw_alloc_dmabuf_req req;
struct drm_vmw_dmabuf_rep rep;
};
/*************************************************************************/
/**
* DRM_VMW_UNREF_DMABUF - Free a DMA buffer.
*
*/
/**
* struct drm_vmw_unref_dmabuf_arg
*
* @handle: Handle indicating what buffer to free. Obtained from the
* DRM_VMW_ALLOC_DMABUF Ioctl.
*
* Argument to the DRM_VMW_UNREF_DMABUF Ioctl.
*/
struct drm_vmw_unref_dmabuf_arg {
uint32_t handle;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_CONTROL_STREAM - Control overlays, aka streams.
*
* This IOCTL controls the overlay units of the svga device.
* The SVGA overlay units does not work like regular hardware units in
* that they do not automaticaly read back the contents of the given dma
* buffer. But instead only read back for each call to this ioctl, and
* at any point between this call being made and a following call that
* either changes the buffer or disables the stream.
*/
/**
* struct drm_vmw_rect
*
* Defines a rectangle. Used in the overlay ioctl to define
* source and destination rectangle.
*/
struct drm_vmw_rect {
int32_t x;
int32_t y;
uint32_t w;
uint32_t h;
};
/**
* struct drm_vmw_control_stream_arg
*
* @stream_id: Stearm to control
* @enabled: If false all following arguments are ignored.
* @handle: Handle to buffer for getting data from.
* @format: Format of the overlay as understood by the host.
* @width: Width of the overlay.
* @height: Height of the overlay.
* @size: Size of the overlay in bytes.
* @pitch: Array of pitches, the two last are only used for YUV12 formats.
* @offset: Offset from start of dma buffer to overlay.
* @src: Source rect, must be within the defined area above.
* @dst: Destination rect, x and y may be negative.
*
* Argument to the DRM_VMW_CONTROL_STREAM Ioctl.
*/
struct drm_vmw_control_stream_arg {
uint32_t stream_id;
uint32_t enabled;
uint32_t flags;
uint32_t color_key;
uint32_t handle;
uint32_t offset;
int32_t format;
uint32_t size;
uint32_t width;
uint32_t height;
uint32_t pitch[3];
uint32_t pad64;
struct drm_vmw_rect src;
struct drm_vmw_rect dst;
};
/*************************************************************************/
/**
* DRM_VMW_CURSOR_BYPASS - Give extra information about cursor bypass.
*
*/
#define DRM_VMW_CURSOR_BYPASS_ALL (1 << 0)
#define DRM_VMW_CURSOR_BYPASS_FLAGS (1)
/**
* struct drm_vmw_cursor_bypass_arg
*
* @flags: Flags.
* @crtc_id: Crtc id, only used if DMR_CURSOR_BYPASS_ALL isn't passed.
* @xpos: X position of cursor.
* @ypos: Y position of cursor.
* @xhot: X hotspot.
* @yhot: Y hotspot.
*
* Argument to the DRM_VMW_CURSOR_BYPASS Ioctl.
*/
struct drm_vmw_cursor_bypass_arg {
uint32_t flags;
uint32_t crtc_id;
int32_t xpos;
int32_t ypos;
int32_t xhot;
int32_t yhot;
};
/*************************************************************************/
/**
* DRM_VMW_CLAIM_STREAM - Claim a single stream.
*/
/**
* struct drm_vmw_context_arg
*
* @stream_id: Device unique context ID.
*
* Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl.
* Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl.
*/
struct drm_vmw_stream_arg {
uint32_t stream_id;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_UNREF_STREAM - Unclaim a stream.
*
* Return a single stream that was claimed by this process. Also makes
* sure that the stream has been stopped.
*/
/*************************************************************************/
/**
* DRM_VMW_GET_3D_CAP
*
* Read 3D capabilities from the FIFO
*
*/
/**
* struct drm_vmw_get_3d_cap_arg
*
* @buffer: Pointer to a buffer for capability data, cast to an uint64_t
* @size: Max size to copy
*
* Input argument to the DRM_VMW_GET_3D_CAP_IOCTL
* ioctls.
*/
struct drm_vmw_get_3d_cap_arg {
uint64_t buffer;
uint32_t max_size;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_FENCE_WAIT
*
* Waits for a fence object to signal. The wait is interruptible, so that
* signals may be delivered during the interrupt. The wait may timeout,
* in which case the calls returns -EBUSY. If the wait is restarted,
* that is restarting without resetting @cookie_valid to zero,
* the timeout is computed from the first call.
*
* The flags argument to the DRM_VMW_FENCE_WAIT ioctl indicates what to wait
* on:
* DRM_VMW_FENCE_FLAG_EXEC: All commands ahead of the fence in the command
* stream
* have executed.
* DRM_VMW_FENCE_FLAG_QUERY: All query results resulting from query finish
* commands
* in the buffer given to the EXECBUF ioctl returning the fence object handle
* are available to user-space.
*
* DRM_VMW_WAIT_OPTION_UNREF: If this wait option is given, and the
* fenc wait ioctl returns 0, the fence object has been unreferenced after
* the wait.
*/
#define DRM_VMW_FENCE_FLAG_EXEC (1 << 0)
#define DRM_VMW_FENCE_FLAG_QUERY (1 << 1)
#define DRM_VMW_WAIT_OPTION_UNREF (1 << 0)
/**
* struct drm_vmw_fence_wait_arg
*
* @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
* @cookie_valid: Must be reset to 0 on first call. Left alone on restart.
* @kernel_cookie: Set to 0 on first call. Left alone on restart.
* @timeout_us: Wait timeout in microseconds. 0 for indefinite timeout.
* @lazy: Set to 1 if timing is not critical. Allow more than a kernel tick
* before returning.
* @flags: Fence flags to wait on.
* @wait_options: Options that control the behaviour of the wait ioctl.
*
* Input argument to the DRM_VMW_FENCE_WAIT ioctl.
*/
struct drm_vmw_fence_wait_arg {
uint32_t handle;
int32_t cookie_valid;
uint64_t kernel_cookie;
uint64_t timeout_us;
int32_t lazy;
int32_t flags;
int32_t wait_options;
int32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_FENCE_SIGNALED
*
* Checks if a fence object is signaled..
*/
/**
* struct drm_vmw_fence_signaled_arg
*
* @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
* @flags: Fence object flags input to DRM_VMW_FENCE_SIGNALED ioctl
* @signaled: Out: Flags signaled.
* @sequence: Out: Highest sequence passed so far. Can be used to signal the
* EXEC flag of user-space fence objects.
*
* Input/Output argument to the DRM_VMW_FENCE_SIGNALED and DRM_VMW_FENCE_UNREF
* ioctls.
*/
struct drm_vmw_fence_signaled_arg {
uint32_t handle;
uint32_t flags;
int32_t signaled;
uint32_t passed_seqno;
uint32_t signaled_flags;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_FENCE_UNREF
*
* Unreferences a fence object, and causes it to be destroyed if there are no
* other references to it.
*
*/
/**
* struct drm_vmw_fence_arg
*
* @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
*
* Input/Output argument to the DRM_VMW_FENCE_UNREF ioctl..
*/
struct drm_vmw_fence_arg {
uint32_t handle;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_FENCE_EVENT
*
* Queues an event on a fence to be delivered on the drm character device
* when the fence has signaled the DRM_VMW_FENCE_FLAG_EXEC flag.
* Optionally the approximate time when the fence signaled is
* given by the event.
*/
/*
* The event type
*/
#define DRM_VMW_EVENT_FENCE_SIGNALED 0x80000000
struct drm_vmw_event_fence {
struct drm_event base;
uint64_t user_data;
uint32_t tv_sec;
uint32_t tv_usec;
};
/*
* Flags that may be given to the command.
*/
/* Request fence signaled time on the event. */
#define DRM_VMW_FE_FLAG_REQ_TIME (1 << 0)
/**
* struct drm_vmw_fence_event_arg
*
* @fence_rep: Pointer to fence_rep structure cast to uint64_t or 0 if
* the fence is not supposed to be referenced by user-space.
* @user_info: Info to be delivered with the event.
* @handle: Attach the event to this fence only.
* @flags: A set of flags as defined above.
*/
struct drm_vmw_fence_event_arg {
uint64_t fence_rep;
uint64_t user_data;
uint32_t handle;
uint32_t flags;
};
/*************************************************************************/
/**
* DRM_VMW_PRESENT
*
* Executes an SVGA present on a given fb for a given surface. The surface
* is placed on the framebuffer. Cliprects are given relative to the given
* point (the point disignated by dest_{x|y}).
*
*/
/**
* struct drm_vmw_present_arg
* @fb_id: framebuffer id to present / read back from.
* @sid: Surface id to present from.
* @dest_x: X placement coordinate for surface.
* @dest_y: Y placement coordinate for surface.
* @clips_ptr: Pointer to an array of clip rects cast to an uint64_t.
* @num_clips: Number of cliprects given relative to the framebuffer origin,
* in the same coordinate space as the frame buffer.
* @pad64: Unused 64-bit padding.
*
* Input argument to the DRM_VMW_PRESENT ioctl.
*/
struct drm_vmw_present_arg {
uint32_t fb_id;
uint32_t sid;
int32_t dest_x;
int32_t dest_y;
uint64_t clips_ptr;
uint32_t num_clips;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_PRESENT_READBACK
*
* Executes an SVGA present readback from a given fb to the dma buffer
* currently bound as the fb. If there is no dma buffer bound to the fb,
* an error will be returned.
*
*/
/**
* struct drm_vmw_present_arg
* @fb_id: fb_id to present / read back from.
* @num_clips: Number of cliprects.
* @clips_ptr: Pointer to an array of clip rects cast to an uint64_t.
* @fence_rep: Pointer to a struct drm_vmw_fence_rep, cast to an uint64_t.
* If this member is NULL, then the ioctl should not return a fence.
*/
struct drm_vmw_present_readback_arg {
uint32_t fb_id;
uint32_t num_clips;
uint64_t clips_ptr;
uint64_t fence_rep;
};
/*************************************************************************/
/**
* DRM_VMW_UPDATE_LAYOUT - Update layout
*
* Updates the preferred modes and connection status for connectors. The
* command consists of one drm_vmw_update_layout_arg pointing to an array
* of num_outputs drm_vmw_rect's.
*/
/**
* struct drm_vmw_update_layout_arg
*
* @num_outputs: number of active connectors
* @rects: pointer to array of drm_vmw_rect cast to an uint64_t
*
* Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
*/
struct drm_vmw_update_layout_arg {
uint32_t num_outputs;
uint32_t pad64;
uint64_t rects;
};
/*************************************************************************/
/**
* DRM_VMW_CREATE_SHADER - Create shader
*
* Creates a shader and optionally binds it to a dma buffer containing
* the shader byte-code.
*/
/**
* enum drm_vmw_shader_type - Shader types
*/
enum drm_vmw_shader_type {
drm_vmw_shader_type_vs = 0,
drm_vmw_shader_type_ps,
drm_vmw_shader_type_gs
};
/**
* struct drm_vmw_shader_create_arg
*
* @shader_type: Shader type of the shader to create.
* @size: Size of the byte-code in bytes.
* where the shader byte-code starts
* @buffer_handle: Buffer handle identifying the buffer containing the
* shader byte-code
* @shader_handle: On successful completion contains a handle that
* can be used to subsequently identify the shader.
* @offset: Offset in bytes into the buffer given by @buffer_handle,
*
* Input / Output argument to the DRM_VMW_CREATE_SHADER Ioctl.
*/
struct drm_vmw_shader_create_arg {
enum drm_vmw_shader_type shader_type;
uint32_t size;
uint32_t buffer_handle;
uint32_t shader_handle;
uint64_t offset;
};
/*************************************************************************/
/**
* DRM_VMW_UNREF_SHADER - Unreferences a shader
*
* Destroys a user-space reference to a shader, optionally destroying
* it.
*/
/**
* struct drm_vmw_shader_arg
*
* @handle: Handle identifying the shader to destroy.
*
* Input argument to the DRM_VMW_UNREF_SHADER ioctl.
*/
struct drm_vmw_shader_arg {
uint32_t handle;
uint32_t pad64;
};
/*************************************************************************/
/**
* DRM_VMW_GB_SURFACE_CREATE - Create a host guest-backed surface.
*
* Allocates a surface handle and queues a create surface command
* for the host on the first use of the surface. The surface ID can
* be used as the surface ID in commands referencing the surface.
*/
/**
* enum drm_vmw_surface_flags
*
* @drm_vmw_surface_flag_shareable: Whether the surface is shareable
* @drm_vmw_surface_flag_scanout: Whether the surface is a scanout
* surface.
* @drm_vmw_surface_flag_create_buffer: Create a backup buffer if none is
* given.
*/
enum drm_vmw_surface_flags {
drm_vmw_surface_flag_shareable = (1 << 0),
drm_vmw_surface_flag_scanout = (1 << 1),
drm_vmw_surface_flag_create_buffer = (1 << 2)
};
/**
* struct drm_vmw_gb_surface_create_req
*
* @svga3d_flags: SVGA3d surface flags for the device.
* @format: SVGA3d format.
* @mip_level: Number of mip levels for all faces.
* @drm_surface_flags Flags as described above.
* @multisample_count Future use. Set to 0.
* @autogen_filter Future use. Set to 0.
* @buffer_handle Buffer handle of backup buffer. SVGA3D_INVALID_ID
* if none.
* @base_size Size of the base mip level for all faces.
*
* Input argument to the DRM_VMW_GB_SURFACE_CREATE Ioctl.
* Part of output argument for the DRM_VMW_GB_SURFACE_REF Ioctl.
*/
struct drm_vmw_gb_surface_create_req {
uint32_t svga3d_flags;
uint32_t format;
uint32_t mip_levels;
enum drm_vmw_surface_flags drm_surface_flags;
uint32_t multisample_count;
uint32_t autogen_filter;
uint32_t buffer_handle;
uint32_t pad64;
struct drm_vmw_size base_size;
};
/**
* struct drm_vmw_gb_surface_create_rep
*
* @handle: Surface handle.
* @backup_size: Size of backup buffers for this surface.
* @buffer_handle: Handle of backup buffer. SVGA3D_INVALID_ID if none.
* @buffer_size: Actual size of the buffer identified by
* @buffer_handle
* @buffer_map_handle: Offset into device address space for the buffer
* identified by @buffer_handle.
*
* Part of output argument for the DRM_VMW_GB_SURFACE_REF ioctl.
* Output argument for the DRM_VMW_GB_SURFACE_CREATE ioctl.
*/
struct drm_vmw_gb_surface_create_rep {
uint32_t handle;
uint32_t backup_size;
uint32_t buffer_handle;
uint32_t buffer_size;
uint64_t buffer_map_handle;
};
/**
* union drm_vmw_gb_surface_create_arg
*
* @req: Input argument as described above.
* @rep: Output argument as described above.
*
* Argument to the DRM_VMW_GB_SURFACE_CREATE ioctl.
*/
union drm_vmw_gb_surface_create_arg {
struct drm_vmw_gb_surface_create_rep rep;
struct drm_vmw_gb_surface_create_req req;
};
/*************************************************************************/
/**
* DRM_VMW_GB_SURFACE_REF - Reference a host surface.
*
* Puts a reference on a host surface with a given handle, as previously
* returned by the DRM_VMW_GB_SURFACE_CREATE ioctl.
* A reference will make sure the surface isn't destroyed while we hold
* it and will allow the calling client to use the surface handle in
* the command stream.
*
* On successful return, the Ioctl returns the surface information given
* to and returned from the DRM_VMW_GB_SURFACE_CREATE ioctl.
*/
/**
* struct drm_vmw_gb_surface_reference_arg
*
* @creq: The data used as input when the surface was created, as described
* above at "struct drm_vmw_gb_surface_create_req"
* @crep: Additional data output when the surface was created, as described
* above at "struct drm_vmw_gb_surface_create_rep"
*
* Output Argument to the DRM_VMW_GB_SURFACE_REF ioctl.
*/
struct drm_vmw_gb_surface_ref_rep {
struct drm_vmw_gb_surface_create_req creq;
struct drm_vmw_gb_surface_create_rep crep;
};
/**
* union drm_vmw_gb_surface_reference_arg
*
* @req: Input data as described above at "struct drm_vmw_surface_arg"
* @rep: Output data as described above at "struct drm_vmw_gb_surface_ref_rep"
*
* Argument to the DRM_VMW_GB_SURFACE_REF Ioctl.
*/
union drm_vmw_gb_surface_reference_arg {
struct drm_vmw_gb_surface_ref_rep rep;
struct drm_vmw_surface_arg req;
};
/*************************************************************************/
/**
* DRM_VMW_SYNCCPU - Sync a DMA buffer / MOB for CPU access.
*
* Idles any previously submitted GPU operations on the buffer and
* by default blocks command submissions that reference the buffer.
* If the file descriptor used to grab a blocking CPU sync is closed, the
* cpu sync is released.
* The flags argument indicates how the grab / release operation should be
* performed:
*/
/**
* enum drm_vmw_synccpu_flags - Synccpu flags:
*
* @drm_vmw_synccpu_read: Sync for read. If sync is done for read only, it's a
* hint to the kernel to allow command submissions that references the buffer
* for read-only.
* @drm_vmw_synccpu_write: Sync for write. Block all command submissions
* referencing this buffer.
* @drm_vmw_synccpu_dontblock: Dont wait for GPU idle, but rather return
* -EBUSY should the buffer be busy.
* @drm_vmw_synccpu_allow_cs: Allow command submission that touches the buffer
* while the buffer is synced for CPU. This is similar to the GEM bo idle
* behavior.
*/
enum drm_vmw_synccpu_flags {
drm_vmw_synccpu_read = (1 << 0),
drm_vmw_synccpu_write = (1 << 1),
drm_vmw_synccpu_dontblock = (1 << 2),
drm_vmw_synccpu_allow_cs = (1 << 3)
};
/**
* enum drm_vmw_synccpu_op - Synccpu operations:
*
* @drm_vmw_synccpu_grab: Grab the buffer for CPU operations
* @drm_vmw_synccpu_release: Release a previous grab.
*/
enum drm_vmw_synccpu_op {
drm_vmw_synccpu_grab,
drm_vmw_synccpu_release
};
/**
* struct drm_vmw_synccpu_arg
*
* @op: The synccpu operation as described above.
* @handle: Handle identifying the buffer object.
* @flags: Flags as described above.
*/
struct drm_vmw_synccpu_arg {
enum drm_vmw_synccpu_op op;
enum drm_vmw_synccpu_flags flags;
uint32_t handle;
uint32_t pad64;
};
#endif