| 6d35c8f | Trent Piepho | 01 November 2007, 04:16:09 UTC | V4L/DVB (6514): em28xx: Include linux/mm.h This em28xx-video.c uses functions from this header, but doesn't include it. It depends on some v4l headers included two levels down including poll.h, which includes mm.h. These v4l headers might change, so it's best to include the headers needed directly. It also causes problems for the out of core build system's backward compatibility with older kernels, which is the real reason I bothered to create a patch for something that would otherwise be so minor that it would hardly be worth the trouble. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:28 UTC |
| 32d111a | Alexander E. Patrakov | 31 October 2007, 14:40:09 UTC | V4L/DVB (6506): saa7134-alsa: Fix mmap support Trent Piepho wrote: > I do not think the saa7134-alsa driver supports mmap. The cx88-alsa driver > also claimed to support mmap, but it never worked until I fixed it. It's > pretty clear that the code in saa7134-alsa was based on the same code as > cx88-alsa, so it's likely it has the same bug. You are right. The patch below (based on your cx88 patch, but I don't really understand it) fixes mmap support in saa7134-alsa for me. Recording via mmap (arecord -M -f S16_LE -c 2 -r 32000 -D hw:1) didn't work at all before, works now, tested for at least 20 minutes (but, unfortunately, with one overrun at least 0.719 ms long). Signed-off-by: Alexander E. Patrakov <patrakov@ums.usu.ru> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:26 UTC |
| f21daa4 | Mike Isely | 29 October 2007, 01:19:53 UTC | V4L/DVB (6504): pvrusb2: Remove dead sysfs code The pvrusb2 driver's sysfs implementation had long since implemented a dummy hotplug function because at the time the kernel would oops without at least the empty function being present. Today - after numerous class interface changes in the kernel - this pvrusb2 change had been dutifully carried forward but an inspection of the kernel sources shows that it is no longer needed. So remove the dummy function and its reference. This also solves a recurring backwards compatibility issue in the pvrusb2 driver as the class interface has been getting thrashed in the kernel. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:26 UTC |
| 4ed53a5 | Roel Kluin | 29 October 2007, 01:15:33 UTC | V4L/DVB (6503): pvrusb2: Fix associativity logic error if(!x & y) should either be if(!(x & y)) or if(!x && y) I made changes as seemed appropriate, but please review this is against current git. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:25 UTC |
| 85085ad | Hartmut Birr | 31 October 2007, 05:04:16 UTC | V4L/DVB (6501): stv0297: Signal strength fixes Fixes the signal strength value (higher value = higher signal strength) and scales the value to the range of 0..ffff. The characteristic itself is wrong. To get proper values on a TT-C2300 in the range of 40..60% real signal strength, the values from the patch should be divide by two. The attached patch doesn't fix the characteristic. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:25 UTC |
| 7cccccc | Hartmut Birr | 31 October 2007, 04:57:58 UTC | V4L/DVB (6500): tda10021: Fix reported signal strength Fix reported signal strength value (higher value = higher signal strength). Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:25 UTC |
| 3de0e18 | Hartmut Birr | 31 October 2007, 04:50:47 UTC | V4L/DVB (6499): tda10021: Bit error counting fixed Bit error counting fixed for the tda10021. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:24 UTC |
| 4a3625b | Oliver Endriss | 31 October 2007, 04:34:25 UTC | V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm Change the acquisition range for clock recovery from 120 ppm to 240ppm. Apparently, some cable providers in Germany are playing with their parameters, and the capture range of the ves1820 is too small to acquire a lock with the current setting... ;-( Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:24 UTC |
| 26ac14e | Oliver Endriss | 31 October 2007, 03:39:48 UTC | V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes Two fixes for the 'saa7146_wait_for_debi_done' code: (a) Timeout did not work when the routine was called with interrupts disabled. (b) Reduce PCI I/O load caused by saa7146_wait_for_debi_done. Seems to be very important on fast machines! Based on code posted by Hartmut Birr @vdr-portal. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:23 UTC |
| cb20630 | Randy Dunlap | 29 October 2007, 18:19:55 UTC | V4L/DVB (6479): use input functions, should depend on INPUT All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:23 UTC |
| 5efeb97 | Randy Dunlap | 29 October 2007, 18:19:50 UTC | V4L/DVB (6478): ir-functions use input functions, should depend on INPUT Media ir-functions uses input_(*) functions so it should depend on the INPUT config symbol. drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:21 UTC |
| 04d934f | Adrian Bunk | 24 October 2007, 12:06:47 UTC | V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m This patch fixes CONFIG_TUNER_TEA5761=m broken by commit ca805d57cf5ea7482ed3da28653f30621249ee45. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:21 UTC |
| 52c28d4 | Jeff Garzik | 26 October 2007, 12:00:37 UTC | V4L/DVB (6407): planb: fix obvious interrupt handling bugs irq handlers have returned a return value for years now... catch up with the times. Also, ditch unneeded prototype. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:20 UTC |
| 387a299 | hermann pitton | 26 October 2007, 00:26:53 UTC | V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro saa7134: fix analog audio in on medion md8800 quadro, aka CTX944 Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:20 UTC |
| 195ccf6 | Steven Toth | 25 October 2007, 02:12:58 UTC | V4L/DVB (6403): mt2131: replace comma with semicolon fix Semicolon fix. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:19 UTC |
| dd7d501 | Steven Toth | 25 October 2007, 00:05:51 UTC | V4L/DVB (6402): s5h1409: Fix broken QAM support This patch enables QAM Annex-B support (US digital cable) for the s5h1409 VSB/QAM demodulator. Tested successfully with the mt2131 tuner, present on the following supported boards: Hauppauge WinTV-HVR-1250 Hauppauge WinTV-HVR-1800 Hauppauge WinTV-HVR-1800lp This patch is also known to work with an upcoming XC5000 tuner driver. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:19 UTC |
| bb8d56a | Jonathan Corbet | 23 October 2007, 20:31:36 UTC | V4L/DVB (6395): cafe_ccic: Add a pointer to the data sheet Add a pointer to the (recently posted) Cafe data sheet. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:18 UTC |
| c303449 | Jonathan Corbet | 23 October 2007, 20:30:27 UTC | V4L/DVB (6394): Fix a cafe_ccic resume bug If the system is suspended while the camera is streaming, it will not continue streaming on resume. Save the state properly so that resume works. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:18 UTC |
| a8ab68b | Trent Piepho | 22 October 2007, 20:44:55 UTC | V4L/DVB (6392): bttv: Update initial image size when set via V4L1 VIDIOCMCAPTURE The V4L1 spec says that the image size should be with with VIDIOCSWIN before requesting buffers with VIDIOCGMBUF and capturing into them with VIDIOCMCAPTURE. But it seems that many apps don't do this. They set the size using the fields in the VIDIOCMCAPTURE ioctl. The driver doesn't know what size to capture until it actually starts to capture. In particular, it doesn't know what size to capture until it has already mmap the captured buffers. Which is quite stupid. Why V4L1 has size and format fields for VIDIOCMCAPTURE I have no idea. Many drivers don't support this, including those using v4l1-compat. The bttv does, which is probably the only reason such broken software is so prevalent. But, the driver doesn't adjust its idea of what size is being captured when it is set this way. If you try to query the driver's current setting with v4l2-ctl, it won't be correct. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:16 UTC |
| 3537843 | Trent Piepho | 22 October 2007, 20:44:54 UTC | V4L/DVB (6391): bttv: SPICT ioctl doesn't work with vlc The bttv driver instists that the depth specified in the call to VIDIOCSPICT match the pixel format specified in the same call. vlc doesn't set the depth field, which makes the SPICT ioctl always fail. The V4L1 standard is not clear on how most operation are supposed to work, and this is no exception. The depth field would appear to be entirely redundant, as the pixel format specifies a specific depth. It could be that this field was only meant for output from the *G*PICT ioctl and should be ignored in *S*PICT. This is in fact what the v4l1-compat wrapper does. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:16 UTC |
| 0180bf3 | Mauro Carvalho Chehab | 26 October 2007, 03:11:17 UTC | V4L/DVB (6390): Updates missing entries at CARDLIST.em28xx Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:15 UTC |
| 5da0c7a | Linus Torvalds | 04 November 2007, 21:14:15 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: iso and async streams: s/g list fix | 04 November 2007, 21:14:15 UTC |
| 615bb29 | Mark Lord | 04 November 2007, 02:04:03 UTC | rtc: ignore msb when reading back mday from alarm I have a system here that actively relies upon RTC wake alarms, and it has been failing (again) for a few days when attempting to use the /sys/class/rtc/rtc?/wakealarm interface. The old (fixed by Linus) /proc/ interface still works, but I'd like to get it using the new one. This patch fixes rtc-cmos to ignore the two upper bits when reading the BCD mday (day of month) register from CMOS. Some systems (eg. mine) seem to have the top bit set to "1" for some reason. The older /proc/ interface ignores the upper bits, and so we should too. Signed-off-by: Mark Lord <mlord@pobox.com> Acked-by: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 November 2007, 21:13:09 UTC |
| 69ee0b3 | Sam Ravnborg | 04 November 2007, 18:00:46 UTC | kbuild: do not pick up CFLAGS from the environment Too many people have CFLAGS set to support building userspace. And now Kbuild picks up CFLAGS this caused troubles. Although people should realise that setting CFLAGS has a 'global' effect the impact on the kernel build is a suprise. So change kbuild to pick up value from KCFLAGS that is much less used. When kbuild pick up a value it will warn like this: Makefile:544: "WARNING: Appending $KCFLAGS (-O3) from environment to kernel $CFLAGS" Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Bächler <thomas@archlinux.org> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> | 04 November 2007, 18:00:46 UTC |
| 9e66269 | Jens Axboe | 04 November 2007, 08:44:56 UTC | ieee1394: iso and async streams: s/g list fix Torsten Kaiser wrote: > Looking that calltrace upwards, it seems replacing the > memset(dma->sglist,...) with sg_init_table(...) would fix the BUG_ON() > as that inits the SG_MAGIC. Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 04 November 2007, 13:31:16 UTC |
| f26792d | Jeff Garzik | 29 October 2007, 21:18:39 UTC | [libata] Utilize new SCSI event infrastructure An end to CD-ROM polling (if you have a device that supports AN)... hooray! Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 04 November 2007, 02:23:02 UTC |
| a341cd0 | Jeff Garzik | 29 October 2007, 21:15:22 UTC | SCSI: add asynchronous event notification API Originally based on a patch by Kristen Carlson Accardi @ Intel. Copious input from James Bottomley. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 04 November 2007, 02:23:02 UTC |
| b4f5550 | Linus Torvalds | 03 November 2007, 19:43:36 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: [BLOCK] Don't allow empty barriers to be passed down to queues that don't grok them dm: bounce_pfn limit added Deadline iosched: Fix batching fairness Deadline iosched: Reset batch for ordered requests Deadline iosched: Factor out finding latter reques | 03 November 2007, 19:43:36 UTC |
| 160acc2 | Linus Torvalds | 03 November 2007, 19:43:21 UTC | Merge branch 'sg' of git://git.kernel.dk/linux-2.6-block * 'sg' of git://git.kernel.dk/linux-2.6-block: [SG] Get rid of __sg_mark_end() cleanup asm/scatterlist.h includes SG: Make sg_init_one() use general table init functions | 03 November 2007, 19:43:21 UTC |
| a7e1e00 | Linus Torvalds | 03 November 2007, 19:42:52 UTC | Merge branch 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: fix a typo in the __lock_acquire comment sched: fix unconditional irq lock lockdep: fixup irq tracing | 03 November 2007, 19:42:52 UTC |
| 2180626 | Linus Torvalds | 03 November 2007, 19:41:58 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Update defconfigs. sh64: fix dma_cache_sync() compilation sh64: Move DMA macros from pci.h to scatterlist.h. | 03 November 2007, 19:41:58 UTC |
| 5c27d0f | Linus Torvalds | 03 November 2007, 19:41:42 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (24 commits) sh: Update r7785rp defconfig. sh: mach-type updates. sh: Fix up r7780rp highlander CF access size. sh: Terminate .eh_frame in VDSO with a 4-byte 0. sh: Correct SUBARCH matching. sh: Decouple 4k and soft/hardirq stacks. sh: Fix optimized __copy_user() movca.l usage. sh: Clean up SR.RB Kconfig mess. sh: Kill off dead ipr_irq_demux(). sh: Make SH7750 oprofile compile again. sh: Provide a __read_mostly section wrapper. sh: linker script tidying. sh: Move zero page param defs somewhere sensible. sh: Use generic SMP_CACHE_BYTES/L1_CACHE_ALIGN. sh: Kill off legacy embedded ramdisk section. sh: Fix up early mem cmdline parsing. sh: Enable USBF on MS7722SE. sh: Add resource of USBF for SH7722. maple: Fix maple bus compiler warning sh: fix zImage build with >=binutils-2.18 ... | 03 November 2007, 19:41:42 UTC |
| 468f8af | Linus Torvalds | 03 November 2007, 19:27:56 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (23 commits) libata: don't configure downstream links faster than the upstream link libata: request PHY speed configuration on SControl access failure libata: consider errors not associated with commands for speed down libata: more robust reset failure handling libata: cosmetic clean up / reorganization of ata_eh_reset() libata: fix timing computation in ata_eh_reset() libata: increase 128 KB / cmd limit for ATAPI tape drives sata_promise: fix endianess bug in ASIC PRD bug workaround libata: fix docbook make ata_scsi_lpm_get() static libata: suppress two warnings ata/sata_fsl: Remove ata_scsi_suspend/resume callbacks ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset() ata/sata_fsl: Move MPC8315DS link speed limit workaround to specific ifdef ata/sata_fsl: cleanup style problem ata/sata_fsl: remove unneeded sata_fsl_hardreset() ata/sata_fsl: remove unneeded on-stack copy of FIS ata/sata_fsl: cleanup needless casts to/from void __iomem * ata/sata_fsl: Remove unnecessary SCR cases ata/sata_fsl: Kill ata_sg_is_last() ... | 03 November 2007, 19:27:56 UTC |
| ebab899 | Anton Altaparmakov | 03 November 2007, 07:38:59 UTC | NTFS: Fix read regression. The regression was caused by: commit[a32ea1e1f925399e0d81ca3f7394a44a6dafa12c] Fix read/truncate race This causes ntfs_readpage() to be called for a zero i_size inode, which failed when the file was compressed and non-resident. Thanks a lot to Mike Galbraith for reporting the issue and tracking down the commit that caused the regression. Looking into it I found three bugs which the patch fixes. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 November 2007, 19:27:21 UTC |
| 3c887e8 | Robert Jennings | 30 October 2007, 16:37:07 UTC | [SCSI] ibmvscsi: Prevent IO during partner login By setting the request_limit in send_srp_login to 1 we allowed login requests to be sent to the server adapter. If this was not an initial login, but was a login after a disconnect with the server, other I/O requests could attempt to be processed before the login occured. These I/O requests would fail, sometimes resulting in filesystems getting marked read-only. To address this we can set the request_limit to 0 while doing the login and add an exception where login requests, along with task management events, are always passed to the server. There is a case where the request_limit had already reached 0 would result in all events being sent rather than returning SCSI_MLQUEUE_HOST_BUSY; this has also been fixed by this patch. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 03 November 2007, 17:10:36 UTC |
| 7e2b19f | James Smart | 29 October 2007, 15:00:39 UTC | [SCSI] lpfc : Correct queue tag handling This patch corrects the lpfc tag handling issue identified by Hannes Reinecke http://marc.info/?l=linux-scsi@m=119270235628850&w=2 The basis for this patch originated from Hajime Kai. Thank You Hajime. Signed-off-by: hajime-kai@soft.fujitsu.com Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 03 November 2007, 17:09:29 UTC |
| c4e1608 | James Bottomley | 03 November 2007, 13:40:30 UTC | [SCSI] Update MAINTAINER email address and trees Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | 03 November 2007, 13:40:30 UTC |
| 5270222 | Tejun Heo | 31 October 2007, 01:17:07 UTC | libata: don't configure downstream links faster than the upstream link There's nothing to be gained by configuring downstream links faster than the upstream link and such configurations cause problems on certain PMPs. Limit downstream link speed by the upstream link speed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:47:27 UTC |
| db64bcf | Tejun Heo | 31 October 2007, 01:17:06 UTC | libata: request PHY speed configuration on SControl access failure In sata_set_spd_needed(), if SControl read failed, it returned 0 and skipped PHY speed configuration. However, if SControl access fails, it's far more logical to request PHY speed configuration. Reverse the logic. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:47:27 UTC |
| dfcc173 | Tejun Heo | 31 October 2007, 01:17:05 UTC | libata: consider errors not associated with commands for speed down libata EH used to ignore errors not associated with commands when determining whether speed down is necessary or not. This leads to the following problems. * Errors not associated with commands can occur indefinitely without libata EH taking corrective actions. * Upstream link errors don't trigger speed down when PMP is attached to it and commands issued to downstream device trigger errors on the upstream link. This patch makes ata_eh_link_autopsy() consider errors not associated with command for speed down. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:47:26 UTC |
| 08cf69d | Tejun Heo | 31 October 2007, 01:17:04 UTC | libata: more robust reset failure handling Reset failure is a critical error. It results in disabling the link requiring user intervention to re-enable it. Make reset failure handling more robust such that libata EH doesn't give up too early. * Temporary glitches during hardreset may lead to classification failure when there's no softreset available. Retry instead of giving up. * Initial softreset or follow up softreset may fail classification. Move classification error handling block out of followup softreset block such that both cases are handled and retry instead of giving up. Also, on the last try, give ATA class a blind shot. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:54 UTC |
| 416dc9e | Tejun Heo | 31 October 2007, 01:17:03 UTC | libata: cosmetic clean up / reorganization of ata_eh_reset() Clean up and reorganize ata_eh_reset() to ease further changes. * Cache ARRAY_SIZE(ata_eh_reset_timeouts) in @max_tries. * Cache link->flags in @lflags. * Move failure handling block to the end of the function and unnest both success and failure handling blocks. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:54 UTC |
| cd95546 | Tejun Heo | 31 October 2007, 01:17:02 UTC | libata: fix timing computation in ata_eh_reset() As jiffies changes asynchronously, it needs to be cached if unchanging timestamp is needed. The code in ata_eh_reset() intended to do that with @now but never actually did it. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:54 UTC |
| f8d8e57 | Tony Battersby | 30 October 2007, 15:44:35 UTC | libata: increase 128 KB / cmd limit for ATAPI tape drives Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are limited in the amount of data that they can transfer by the max_sectors value. The max_sectors value is currently calculated according to the command set for disk drives, which doesn't apply to tape drives. The default max_sectors value of 256 limits ATAPI tape drive commands to 128 KB. This patch against 2.6.24-rc1 increases the max_sectors value for tape drives to 65535, which permits tape drive commands to transfer just under 32 MB. Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V SATA tape drive. Note that some of the chipset drivers also set their own max_sectors value, which may override the value set in libata-core. I don't have any of these chipsets to test, so I didn't go messing with them. Also, ATAPI devices other than tape drives may benefit from similar changes, but I have only tape drives and disk drives to test. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:54 UTC |
| 03116d6 | Mikael Pettersson | 31 October 2007, 12:21:29 UTC | sata_promise: fix endianess bug in ASIC PRD bug workaround The original workaround for the Promise ASIC PRD bug contained an endianess bug which I failed to detect: the adjustment of the last PRD entry's length field applied host arithmetic to little-endian data, which is incorrect on big-endian machines. We have the length available in host-endian format, so do the adjustment on host-endian data and then convert and store it in the PRD entry's little-endian data field. Thanks to an anonymous reviewer for detecting this bug. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:54 UTC |
| 48166fd | Stephen Hemminger | 31 October 2007, 17:00:27 UTC | libata: fix docbook Fix docbook format in the comments. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:53 UTC |
| a2d6ed1 | Adrian Bunk | 30 October 2007, 23:50:23 UTC | make ata_scsi_lpm_get() static ata_scsi_lpm_get() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:29 UTC |
| 1992a5e | Stephen Rothwell | 31 October 2007, 03:53:32 UTC | libata: suppress two warnings drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:29 UTC |
| aa91c72 | ashish kalra | 31 October 2007, 11:28:04 UTC | ata/sata_fsl: Remove ata_scsi_suspend/resume callbacks Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:29 UTC |
| 1f0e417 | ashish kalra | 31 October 2007, 11:28:03 UTC | ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset() Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:29 UTC |
| e7eac96 | ashish kalra | 31 October 2007, 11:28:02 UTC | ata/sata_fsl: Move MPC8315DS link speed limit workaround to specific ifdef Signed-off-by: ashish kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:28 UTC |
| 520d3a1 | Li Yang | 31 October 2007, 11:28:01 UTC | ata/sata_fsl: cleanup style problem Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:28 UTC |
| 066ce4d | Jeff Garzik | 31 October 2007, 11:28:00 UTC | ata/sata_fsl: remove unneeded sata_fsl_hardreset() Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:28 UTC |
| 25ce945 | Jeff Garzik | 31 October 2007, 11:27:59 UTC | ata/sata_fsl: remove unneeded on-stack copy of FIS Remove unneeded on-stack copy of FIS in sata_fsl_cache_taskfile_from_d2h_fis(). Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:28 UTC |
| 2a52e8d | Jeff Garzik | 31 October 2007, 11:27:58 UTC | ata/sata_fsl: cleanup needless casts to/from void __iomem * Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:28 UTC |
| 9465d53 | Jeff Garzik | 31 October 2007, 11:27:57 UTC | ata/sata_fsl: Remove unnecessary SCR cases SCRs in the driver map to the standard values found in include/linux/ata.h, so no need for individual scr_read/scr_write case statements duplicating the natural value. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:28 UTC |
| a2962dd | Li Yang | 31 October 2007, 11:27:56 UTC | ata/sata_fsl: Kill ata_sg_is_last() Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:27 UTC |
| 79b3edc | Li Yang | 31 October 2007, 11:27:55 UTC | ata/sata_fsl: save irq in private data for irq unmapping Powerpc uses virtual irq which has to be unmapped. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:27 UTC |
| 27c96ea | Li Yang | 31 October 2007, 11:27:54 UTC | ata/sata_fsl: Remove deprecated hooks Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:27 UTC |
| 1bf617b | Li Yang | 31 October 2007, 11:27:53 UTC | ata/sata_fsl: Update for ata_link introduction Update the driver to use the newly added ata_link structure. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> | 03 November 2007, 12:46:27 UTC |
| 74521c2 | Ralf Baechle | 02 November 2007, 17:26:06 UTC | Use i8253.c lock for PC speaker on MIPS, too. The Jazz machines have to use the PIT timer for dyntick and highresolution kernels. This may break because currently just like i386 used to do MIPS uses two separate spinlocks in the actual PIT code and the PC speaker code. So switch to do it the same that x86 currently does PIT locking. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 November 2007, 02:39:18 UTC |
| a89b771 | Linus Torvalds | 03 November 2007, 02:37:41 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: linux-input mailing list moved to vger.kernel.org Input: inport, logibm - use KERN_INFO when reporting missing mouse Input: appletouch - idle reset logic broke older Fountains Input: hp_sdc.c - fix section mismatch Input: appletouch - add Johannes Berg as maintainer Input: Add Euro and Dollar key codes Input: xpad - add more USB IDs | 03 November 2007, 02:37:41 UTC |
| 29dd5a7 | Linus Torvalds | 03 November 2007, 02:37:26 UTC | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (25 commits) [MIPS] Jazz: disable PIT; cleanup R4030 clockevent [MIPS] Bigsur supports highmem. [MIPS] mtx-1: Enable -Werror. [MIPS] mtx-1: Remove unused mtx1_sys_btn. [MIPS] Pb1200: Enable -Werror. [MIPS] Fix and cleanup the MIPS part of the (ab)use of CLOCK_TICK_RATE. [MIPS] SNI: register a02r clockevent; don't use PIT timer [MIPS] i8253.h: Remove all i8259 related definitions. [MIPS] i8253: Cleanup. [MIPS] Cobalt: Fix IRQ comment; the Cobalt kernel uses CP0 counter now. [MIPS] Pb1200: Fix warning. [MIPS] Pb1200: Fix warning. [MIPS] IP27: Fix build error. [MIPS] Excite: Fix build error. [MIPS] Sibyte: Split and move clock code. [MIPS] Sibyte: Fixes for oneshot timer mode. [MIPS] Sibyte: Remove blank line. [MIPS] Swarm: Fix build failure [MIPS] time: Code cleanups [MIPS] time: Remove now unused local_timer_interrupt. ... | 03 November 2007, 02:37:26 UTC |
| 71527bf | Linus Torvalds | 03 November 2007, 02:36:26 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt.c ICH8 pci-device-id's [WATCHDOG] iTCO_wdt.c init & exit fixes [WATCHDOG] iTCO_wdt.c pci_device_id table clean-up [WATCHDOG] spin_lock_init() fixes [WATCHDOG] Unlock in iTCO_wdt_start when reboot is disabled [WATCHDOG] Add necessary braces to if (...) \n #if... cases [WATCHDOG] trivial fix two returns in void functions | 03 November 2007, 02:36:26 UTC |
| acf6035 | Wim Van Sebroeck | 31 August 2007, 08:23:10 UTC | [WATCHDOG] iTCO_wdt.c ICH8 pci-device-id's Add the pci-device-id's for the ICH8M and the ICH8M-E chipsets. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 02 November 2007, 22:25:43 UTC |
| 08113e3 | Wim Van Sebroeck | 31 August 2007, 08:15:34 UTC | [WATCHDOG] iTCO_wdt.c init & exit fixes Mark init and exit procedures as __devinit & _-devexit. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 02 November 2007, 22:25:35 UTC |
| c87b639 | Wim Van Sebroeck | 19 August 2007, 20:17:58 UTC | [WATCHDOG] iTCO_wdt.c pci_device_id table clean-up Make the pci_device_id table more readable. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 02 November 2007, 22:25:21 UTC |
| c7dfd0c | Alexey Dobriyan | 01 November 2007, 23:27:08 UTC | [WATCHDOG] spin_lock_init() fixes Some watchdog drivers initialize global spinlocks in module's init function which is tolerable, but some do it in PCI probe function. So, switch to static initialization to fix theoretical bugs and, more importantly, stop giving people bad examples. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 02 November 2007, 19:09:07 UTC |
| 3be51f7 | Thomas Bogendoerfer | 02 November 2007, 10:17:13 UTC | [MIPS] Jazz: disable PIT; cleanup R4030 clockevent Fix ISA irq acknowledge. Make r4030 clockevent code look like other mips clockevent code. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:49 UTC |
| 651194f | Ralf Baechle | 01 November 2007, 21:55:39 UTC | [MIPS] Bigsur supports highmem. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:49 UTC |
| 9603a23 | Ralf Baechle | 01 November 2007, 16:50:06 UTC | [MIPS] mtx-1: Enable -Werror. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:49 UTC |
| e7c9d6b | Ralf Baechle | 01 November 2007, 16:49:12 UTC | [MIPS] mtx-1: Remove unused mtx1_sys_btn. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:49 UTC |
| ae11e32 | Ralf Baechle | 01 November 2007, 16:46:14 UTC | [MIPS] Pb1200: Enable -Werror. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:48 UTC |
| 72fc19f | Ralf Baechle | 01 November 2007, 15:45:37 UTC | [MIPS] Fix and cleanup the MIPS part of the (ab)use of CLOCK_TICK_RATE. This is the clock rate of the i8253 PIT. A MIPS system may not have a PIT by the symbol is used all over the kernel including some APIs. So keeping it defined to the number for the PIT is the only sane thing for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:48 UTC |
| c929402 | Thomas Bogendoerfer | 01 November 2007, 10:36:42 UTC | [MIPS] SNI: register a02r clockevent; don't use PIT timer Register A20R clockevent. Remove PIT timer setup because it doesn't work Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:48 UTC |
| f6a8cc3 | Ralf Baechle | 01 November 2007, 14:44:57 UTC | [MIPS] i8253.h: Remove all i8259 related definitions. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:48 UTC |
| dd3db6e | Ralf Baechle | 01 November 2007, 14:38:20 UTC | [MIPS] i8253: Cleanup. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:48 UTC |
| 9aa4cc1 | Yoichi Yuasa | 01 November 2007, 12:51:23 UTC | [MIPS] Cobalt: Fix IRQ comment; the Cobalt kernel uses CP0 counter now. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:48 UTC |
| db0c19e | Ralf Baechle | 01 November 2007, 12:59:18 UTC | [MIPS] Pb1200: Fix warning. arch/mips/au1000/pb1200/irqmap.c:101: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result And while at it a few coding style cleanups. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:48 UTC |
| f5cd9f1 | Ralf Baechle | 01 November 2007, 12:22:53 UTC | [MIPS] Pb1200: Fix warning. arch/mips/au1000/pb1200/board_setup.c:71: warning: unused variable 'pin_func' Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:47 UTC |
| c892529 | Ralf Baechle | 01 November 2007, 12:20:51 UTC | [MIPS] IP27: Fix build error. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:47 UTC |
| 07f6169 | Ralf Baechle | 01 November 2007, 12:16:20 UTC | [MIPS] Excite: Fix build error. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:47 UTC |
| 217dd11 | Ralf Baechle | 01 November 2007, 01:57:55 UTC | [MIPS] Sibyte: Split and move clock code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:47 UTC |
| f3f9ad0 | Ralf Baechle | 01 November 2007, 00:24:50 UTC | [MIPS] Sibyte: Fixes for oneshot timer mode. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:47 UTC |
| faf2782 | Ralf Baechle | 01 November 2007, 00:10:07 UTC | [MIPS] Sibyte: Remove blank line. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:47 UTC |
| 211a29a | Thiemo Seufer | 31 October 2007, 16:26:56 UTC | [MIPS] Swarm: Fix build failure Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:47 UTC |
| d9eec1a | Atsushi Nemoto | 30 October 2007, 16:21:03 UTC | [MIPS] time: Code cleanups * Do not include unnecessary headers. * Do not mention time.README. * Do not mention mips_timer_ack. * Make clocksource_mips static. It is now dedicated to c0_timer. * Initialize clocksource_mips.read statically. * Remove null_hpt_read. * Remove an argument of plat_timer_setup. It is just a placeholder. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:46 UTC |
| 1d0a909 | Ralf Baechle | 30 October 2007, 14:24:51 UTC | [MIPS] time: Remove now unused local_timer_interrupt. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:46 UTC |
| 81b635e | Ralf Baechle | 31 October 2007, 13:10:00 UTC | [MIPS] IP32: Fix address of 2nd serial interface. Found by Giuseppe Sacco <giuseppe@eppesuigoccas.homedns.org>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:46 UTC |
| 46abf4b | Ralf Baechle | 31 October 2007, 12:42:56 UTC | [MIPS] SB1250: Use the right irqaction for the timer interrupt. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:46 UTC |
| d1598b6 | Ralf Baechle | 31 October 2007, 12:36:42 UTC | [MIPS] SB1250: Remove stray assignment of cpumask. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:46 UTC |
| 2e5dcd2 | Ralf Baechle | 31 October 2007, 12:34:42 UTC | [MIPS] Sibyte: Fix names of the clockevent devices. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:46 UTC |
| 9e32a51 | Ralf Baechle | 31 October 2007, 00:08:06 UTC | [MIPS] Sibyte: Build fixes / dead code removal. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 02 November 2007, 16:13:46 UTC |
| eb76c5c | Dmitry Torokhov | 02 November 2007, 13:07:33 UTC | Input: linux-input mailing list moved to vger.kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Johannes Berg <johannes@sipsolutions.net> | 02 November 2007, 13:07:33 UTC |
| 51fd77b | Jens Axboe | 02 November 2007, 07:49:08 UTC | [BLOCK] Don't allow empty barriers to be passed down to queues that don't grok them Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 02 November 2007, 07:49:08 UTC |
| 5ec140e | Vasily Averin | 31 October 2007, 07:33:24 UTC | dm: bounce_pfn limit added Device mapper uses its own bounce_pfn that may differ from one on underlying device. In that way dm can build incorrect requests that contain sg elements greater than underlying device is able to handle. This is the cause of slab corruption in i2o layer, occurred on i386 arch when very long direct IO requests are addressed to dm-over-i2o device. Signed-off-by: Vasily Averin <vvs@sw.ru> Cc: <stable@kernel.org> Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 02 November 2007, 07:47:25 UTC |
| 6f5d8aa | Aaron Carroll | 30 October 2007, 09:40:13 UTC | Deadline iosched: Fix batching fairness After switching data directions, deadline always starts the next batch from the lowest-sector request. This gives excessive deadline expiries and large latency and throughput disparity between high- and low-sector requests; an order of magnitude in some tests. This patch changes the batching behaviour so new batches start from the request whose expiry is earliest. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 02 November 2007, 07:47:25 UTC |
| dfb3d72 | Aaron Carroll | 30 October 2007, 09:40:13 UTC | Deadline iosched: Reset batch for ordered requests The deadline I/O scheduler does not reset the batch count when starting a new batch at a higher-sectored request. This means the second and subsequent batch in the same data direction will never exceed a single request in size whenever higher-sectored requests are pending. This patch gives new batches in the same data direction as old ones their full quota of requests by resetting the batch count. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 02 November 2007, 07:47:25 UTC |
| 5d1a536 | Aaron Carroll | 30 October 2007, 09:40:12 UTC | Deadline iosched: Factor out finding latter reques Factor finding the next request in sector-sorted order into a function deadline_latter_request. Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 02 November 2007, 07:47:25 UTC |
| c46f233 | Jens Axboe | 31 October 2007, 11:06:37 UTC | [SG] Get rid of __sg_mark_end() sg_mark_end() overwrites the page_link information, but all users want __sg_mark_end() behaviour where we just set the end bit. That is the most natural way to use the sg list, since you'll fill it in and then mark the end point. So change sg_mark_end() to only set the termination bit. Add a sg_magic debug check as well, and clear a chain pointer if it is set. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 02 November 2007, 07:47:06 UTC |
