Skip to main content

Browse the archive

swh:1:snp:3c665ee4f67729f27f2e40193ab88e7298cf0fef
sort by:
Revision Author Date Message Commit Date
ce4a64e Scott Branden 19 February 2020, 22:14:03 UTC docs: arm64: fix trivial spelling enought to enough in memory.rst Fix trivial spelling error enought to enough in memory.rst. Cc: trivial@kernel.org Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Will Deacon <will@kernel.org> 20 February 2020, 10:03:14 UTC
9424ef5 Shijie Luo 15 February 2020, 08:02:06 UTC ext4: add cond_resched() to __ext4_find_entry() We tested a soft lockup problem in linux 4.19 which could also be found in linux 5.x. When dir inode takes up a large number of blocks, and if the directory is growing when we are searching, it's possible the restart branch could be called many times, and the do while loop could hold cpu a long time. Here is the call trace in linux 4.19. [ 473.756186] Call trace: [ 473.756196] dump_backtrace+0x0/0x198 [ 473.756199] show_stack+0x24/0x30 [ 473.756205] dump_stack+0xa4/0xcc [ 473.756210] watchdog_timer_fn+0x300/0x3e8 [ 473.756215] __hrtimer_run_queues+0x114/0x358 [ 473.756217] hrtimer_interrupt+0x104/0x2d8 [ 473.756222] arch_timer_handler_virt+0x38/0x58 [ 473.756226] handle_percpu_devid_irq+0x90/0x248 [ 473.756231] generic_handle_irq+0x34/0x50 [ 473.756234] __handle_domain_irq+0x68/0xc0 [ 473.756236] gic_handle_irq+0x6c/0x150 [ 473.756238] el1_irq+0xb8/0x140 [ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4] [ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4] [ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4] [ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4] [ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4] [ 473.756402] ext4_lookup+0x8c/0x258 [ext4] [ 473.756407] __lookup_hash+0x8c/0xe8 [ 473.756411] filename_create+0xa0/0x170 [ 473.756413] do_mkdirat+0x6c/0x140 [ 473.756415] __arm64_sys_mkdirat+0x28/0x38 [ 473.756419] el0_svc_common+0x78/0x130 [ 473.756421] el0_svc_handler+0x38/0x78 [ 473.756423] el0_svc+0x8/0xc [ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149] Add cond_resched() to avoid soft lockup and to provide a better system responding. Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org 20 February 2020, 04:53:52 UTC
35df429 Qian Cai 07 February 2020, 14:29:11 UTC ext4: fix a data race in EXT4_I(inode)->i_disksize EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4] write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0) Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write. Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/1581085751-31793-1-git-send-email-cai@lca.pw Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org 20 February 2020, 04:17:02 UTC
7c42545 Dave Airlie 20 February 2020, 02:00:06 UTC Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-fixes Nothing major here, another TU1xx modesetting fix, and hooking up ACR/GR support on TU11x now that NVIDIA have made the firmware available. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv64yBq4KHJ8D-5HQ5eeotApJSMiD+V2ut4f3BonUggf0Q@mail.gmail.com 20 February 2020, 02:00:44 UTC
badcd45 Guenter Roeck 19 February 2020, 22:36:14 UTC hwmon: (acpi_power_meter) Fix lockdep splat Damien Le Moal reports a lockdep splat with the acpi_power_meter, observed with Linux v5.5 and later. ====================================================== WARNING: possible circular locking dependency detected 5.6.0-rc2+ #629 Not tainted ------------------------------------------------------ python/1397 is trying to acquire lock: ffff888619080070 (&resource->lock){+.+.}, at: show_power+0x3c/0xa0 [acpi_power_meter] but task is already holding lock: ffff88881643f188 (kn->count#119){++++}, at: kernfs_seq_start+0x6a/0x160 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (kn->count#119){++++}: __kernfs_remove+0x626/0x7e0 kernfs_remove_by_name_ns+0x41/0x80 remove_attrs+0xcb/0x3c0 [acpi_power_meter] acpi_power_meter_notify+0x1f7/0x310 [acpi_power_meter] acpi_ev_notify_dispatch+0x198/0x1f3 acpi_os_execute_deferred+0x4d/0x70 process_one_work+0x7c8/0x1340 worker_thread+0x94/0xc70 kthread+0x2ed/0x3f0 ret_from_fork+0x24/0x30 -> #0 (&resource->lock){+.+.}: __lock_acquire+0x20be/0x49b0 lock_acquire+0x127/0x340 __mutex_lock+0x15b/0x1350 show_power+0x3c/0xa0 [acpi_power_meter] dev_attr_show+0x3f/0x80 sysfs_kf_seq_show+0x216/0x410 seq_read+0x407/0xf90 vfs_read+0x152/0x2c0 ksys_read+0xf3/0x1d0 do_syscall_64+0x95/0x1010 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(kn->count#119); lock(&resource->lock); lock(kn->count#119); lock(&resource->lock); *** DEADLOCK *** 4 locks held by python/1397: #0: ffff8890242d64e0 (&f->f_pos_lock){+.+.}, at: __fdget_pos+0x9b/0xb0 #1: ffff889040be74e0 (&p->lock){+.+.}, at: seq_read+0x6b/0xf90 #2: ffff8890448eb880 (&of->mutex){+.+.}, at: kernfs_seq_start+0x47/0x160 #3: ffff88881643f188 (kn->count#119){++++}, at: kernfs_seq_start+0x6a/0x160 stack backtrace: CPU: 10 PID: 1397 Comm: python Not tainted 5.6.0-rc2+ #629 Hardware name: Supermicro Super Server/X11DPL-i, BIOS 3.1 05/21/2019 Call Trace: dump_stack+0x97/0xe0 check_noncircular+0x32e/0x3e0 ? print_circular_bug.isra.0+0x1e0/0x1e0 ? unwind_next_frame+0xb9a/0x1890 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe ? graph_lock+0x79/0x170 ? __lockdep_reset_lock+0x3c0/0x3c0 ? mark_lock+0xbc/0x1150 __lock_acquire+0x20be/0x49b0 ? mark_held_locks+0xe0/0xe0 ? stack_trace_save+0x91/0xc0 lock_acquire+0x127/0x340 ? show_power+0x3c/0xa0 [acpi_power_meter] ? device_remove_bin_file+0x10/0x10 ? device_remove_bin_file+0x10/0x10 __mutex_lock+0x15b/0x1350 ? show_power+0x3c/0xa0 [acpi_power_meter] ? show_power+0x3c/0xa0 [acpi_power_meter] ? mutex_lock_io_nested+0x11f0/0x11f0 ? lock_downgrade+0x6a0/0x6a0 ? kernfs_seq_start+0x47/0x160 ? lock_acquire+0x127/0x340 ? kernfs_seq_start+0x6a/0x160 ? device_remove_bin_file+0x10/0x10 ? show_power+0x3c/0xa0 [acpi_power_meter] show_power+0x3c/0xa0 [acpi_power_meter] dev_attr_show+0x3f/0x80 ? memset+0x20/0x40 sysfs_kf_seq_show+0x216/0x410 seq_read+0x407/0xf90 ? security_file_permission+0x16f/0x2c0 vfs_read+0x152/0x2c0 Problem is that reading an attribute takes the kernfs lock in the kernfs code, then resource->lock in the driver. During an ACPI notification, the opposite happens: The resource lock is taken first, followed by the kernfs lock when sysfs attributes are removed and re-created. Presumably this is now seen due to some locking related changes in kernfs after v5.4, but it was likely always a problem. Fix the problem by not blindly acquiring the lock in the notification function. It is only needed to protect the various update functions. However, those update functions are called anyway when sysfs attributes are read. This means that we can just stop calling those functions from the notifier, and the resource lock in the notifier function is no longer needed. That leaves two situations: First, METER_NOTIFY_CONFIG removes and re-allocates capability strings. While it did so under the resource lock, _displaying_ those strings was not protected, creating a race condition. To solve this problem, selectively protect both removal/creation and reporting of capability attributes with the resource lock. Second, removing and re-creating the attribute files is no longer protected by the resource lock. That doesn't matter since access to each individual attribute is protected by the kernfs lock. Userspace may get messed up if attributes disappear and reappear under its nose, but that is not different than today, and there is nothing we can do about it without major driver restructuring. Last but not least, when removing the driver, remove attribute functions first, then release capability strings. This avoids yet another race condition. Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: stable@vger.kernel.org # v5.5+ Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 20 February 2020, 01:25:15 UTC
ca7e1fd Linus Torvalds 20 February 2020, 01:22:10 UTC Merge tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Fixes to build failures and other test bugs" * tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: openat2: fix build error on newer glibc selftests: use LDLIBS for libraries instead of LDFLAGS selftests: fix too long argument selftests: allow detection of build failures Kernel selftests: tpm2: check for tpm support selftests/ftrace: Have pid filter test use instance flag selftests: fix spelling mistaked "chaigned" -> "chained" 20 February 2020, 01:22:10 UTC
854bdba Maxime Ripard 10 February 2020, 10:04:17 UTC dt-bindings: media: csi: Fix clocks description Commit 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20") introduced support for the CSI1 controller on A10 and A20 that unlike CSI0 doesn't have an ISP and therefore only have two clocks, the bus and module clocks. The clocks and clock-names properties have thus been modified to allow either two or tree clocks. However, the current list has the ISP clock at the second position, which means the bindings expects a list of either bus and isp, or bus, isp and mod. The initial intent of the patch was obviously to have bus and mod in the former case. Let's fix the binding so that it validates properly. Fixes: 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> 20 February 2020, 01:03:44 UTC
303d37b Maxime Ripard 10 February 2020, 10:04:16 UTC dt-bindings: media: csi: Add interconnects properties The Allwinner CSI controller is sitting beside the MBUS that is represented as an interconnect. Make sure that the interconnect properties are valid in the binding. Fixes: 7866d6903ce8 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> 20 February 2020, 01:03:44 UTC
867c185 Grygorii Strashko 14 February 2020, 19:44:08 UTC dt-bindings: net: mdio: remove compatible string from example Remove vendor specific compatible string from example, otherwise DT YAML schemas validation may trigger warnings specific to TI ti,davinci_mdio and not to the generic MDIO example. For example, the "bus_freq" is required for davinci_mdio, but not required for generic mdio example. As result following warning will be produced: mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> 20 February 2020, 01:03:44 UTC
3044d98 Thierry Reding 14 January 2020, 12:38:21 UTC dt-bindings: memory-controller: Update example for Tegra124 EMC The example in the Tegra124 EMC device tree binding looks like an old version that doesn't contain all the required fields. Update it with a version from the current DTS files to fix the make dt_binding_check target. Reported-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> [robh: also fix missing '#reset-cells'] Signed-off-by: Rob Herring <robh@kernel.org> 20 February 2020, 01:03:16 UTC
ec0bd60 Dave Airlie 20 February 2020, 01:01:28 UTC Merge tag 'drm-msm-fixes-2020-02-16' of https://gitlab.freedesktop.org/drm/msm into drm-fixes + fix UBWC on GPU and display side for sc7180 + fix DSI suspend/resume issue encountered on sc7180 + fix some breakage on so called "linux-android" devices (fallout from sc7180/a618 support, not seen earlier due to bootloader/firmware differences) + couple other misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGshz5K3tJd=NsBSHq6HGT-ZRa67qt+iN=U2ZFO2oD8kuw@mail.gmail.com 20 February 2020, 01:01:33 UTC
99edb18 Dave Airlie 20 February 2020, 00:46:17 UTC Merge tag 'amd-drm-fixes-5.6-2020-02-19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-19: amdgpu: - HDCP fixes - xclk fix for raven - GFXOFF fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219173954.3847-1-alexander.deucher@amd.com 20 February 2020, 00:46:17 UTC
41f57cf David S. Miller 20 February 2020, 00:42:35 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Alexei Starovoitov says: ==================== pull-request: bpf 2020-02-19 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 10 day(s) which contain a total of 10 files changed, 93 insertions(+), 31 deletions(-). The main changes are: 1) batched bpf hashtab fixes from Brian and Yonghong. 2) various selftests and libbpf fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 20 February 2020, 00:42:35 UTC
fca07a9 David S. Miller 20 February 2020, 00:38:16 UTC Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-02-19 This series contains fixes to the ice driver. Brett fixes an issue where if a user sets an odd [tx|rx]-usecs value through ethtool, the request is denied because the hardware is set to have an ITR with 2us granularity. Also fix an issue where the VF has not been completely removed/reset after being unbound from the host driver, so resolve this by waiting for the VF remove/reset process to happen before checking if the VF is disabled. Michal fixes an issue, where when the user changes flow control via ethtool, the OS is told the link is going down when that may not be the case. Before the fix, the only way to get out of this state was to take the interface down and up again. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 20 February 2020, 00:38:16 UTC
303d040 Willem de Bruijn 19 February 2020, 19:16:32 UTC udp: rehash on disconnect As of the below commit, udp sockets bound to a specific address can coexist with one bound to the any addr for the same port. The commit also phased out the use of socket hashing based only on port (hslot), in favor of always hashing on {addr, port} (hslot2). The change broke the following behavior with disconnect (AF_UNSPEC): server binds to 0.0.0.0:1337 server connects to 127.0.0.1:80 server disconnects client connects to 127.0.0.1:1337 client sends "hello" server reads "hello" // times out, packet did not find sk On connect the server acquires a specific source addr suitable for routing to its destination. On disconnect it reverts to the any addr. The connect call triggers a rehash to a different hslot2. On disconnect, add the same to return to the original hslot2. Skip this step if the socket is going to be unhashed completely. Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address") Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 20 February 2020, 00:34:11 UTC
06f5201 Rohit Maheshwari 19 February 2020, 04:10:22 UTC net/tls: Fix to avoid gettig invalid tls record Current code doesn't check if tcp sequence number is starting from (/after) 1st record's start sequnce number. It only checks if seq number is before 1st record's end sequnce number. This problem will always be a possibility in re-transmit case. If a record which belongs to a requested seq number is already deleted, tls_get_record will start looking into list and as per the check it will look if seq number is before the end seq of 1st record, which will always be true and will return 1st record always, it should in fact return NULL. As part of the fix, start looking each record only if the sequence number lies in the list else return NULL. There is one more check added, driver look for the start marker record to handle tcp packets which are before the tls offload start sequence number, hence return 1st record if the record is tls start marker and seq number is before the 1st record's starting sequence number. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 20 February 2020, 00:32:06 UTC
88d5271 Tomas Paukrt 22 January 2020, 20:10:39 UTC dt-bindings: mmc: omap-hsmmc: Fix SDIO interrupt SDIO interrupt must be specified correctly as IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW. Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by: Rob Herring <robh@kernel.org> 20 February 2020, 00:29:14 UTC
b9aff38 Yonghong Song 19 February 2020, 23:47:57 UTC bpf: Fix a potential deadlock with bpf_map_do_batch Commit 057996380a42 ("bpf: Add batch ops to all htab bpf map") added lookup_and_delete batch operation for hash table. The current implementation has bpf_lru_push_free() inside the bucket lock, which may cause a deadlock. syzbot reports: -> #2 (&htab->buckets[i].lock#2){....}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159 htab_lru_map_delete_node+0xce/0x2f0 kernel/bpf/hashtab.c:593 __bpf_lru_list_shrink_inactive kernel/bpf/bpf_lru_list.c:220 [inline] __bpf_lru_list_shrink+0xf9/0x470 kernel/bpf/bpf_lru_list.c:266 bpf_lru_list_pop_free_to_local kernel/bpf/bpf_lru_list.c:340 [inline] bpf_common_lru_pop_free kernel/bpf/bpf_lru_list.c:447 [inline] bpf_lru_pop_free+0x87c/0x1670 kernel/bpf/bpf_lru_list.c:499 prealloc_lru_pop+0x2c/0xa0 kernel/bpf/hashtab.c:132 __htab_lru_percpu_map_update_elem+0x67e/0xa90 kernel/bpf/hashtab.c:1069 bpf_percpu_hash_update+0x16e/0x210 kernel/bpf/hashtab.c:1585 bpf_map_update_value.isra.0+0x2d7/0x8e0 kernel/bpf/syscall.c:181 generic_map_update_batch+0x41f/0x610 kernel/bpf/syscall.c:1319 bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348 __do_sys_bpf+0x9b7/0x41e0 kernel/bpf/syscall.c:3460 __se_sys_bpf kernel/bpf/syscall.c:3355 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&loc_l->lock){....}: check_prev_add kernel/locking/lockdep.c:2475 [inline] check_prevs_add kernel/locking/lockdep.c:2580 [inline] validate_chain kernel/locking/lockdep.c:2970 [inline] __lock_acquire+0x2596/0x4a00 kernel/locking/lockdep.c:3954 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4484 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:159 bpf_common_lru_push_free kernel/bpf/bpf_lru_list.c:516 [inline] bpf_lru_push_free+0x250/0x5b0 kernel/bpf/bpf_lru_list.c:555 __htab_map_lookup_and_delete_batch+0x8d4/0x1540 kernel/bpf/hashtab.c:1374 htab_lru_map_lookup_and_delete_batch+0x34/0x40 kernel/bpf/hashtab.c:1491 bpf_map_do_batch+0x3f5/0x510 kernel/bpf/syscall.c:3348 __do_sys_bpf+0x1f7d/0x41e0 kernel/bpf/syscall.c:3456 __se_sys_bpf kernel/bpf/syscall.c:3355 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:3355 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Possible unsafe locking scenario: CPU0 CPU2 ---- ---- lock(&htab->buckets[i].lock#2); lock(&l->lock); lock(&htab->buckets[i].lock#2); lock(&loc_l->lock); *** DEADLOCK *** To fix the issue, for htab_lru_map_lookup_and_delete_batch() in CPU0, let us do bpf_lru_push_free() out of the htab bucket lock. This can avoid the above deadlock scenario. Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map") Reported-by: syzbot+a38ff3d9356388f2fb83@syzkaller.appspotmail.com Reported-by: syzbot+122b5421d14e68f29cd1@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Brian Vazquez <brianvv@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200219234757.3544014-1-yhs@fb.com 20 February 2020, 00:01:25 UTC
492e0d0 Brian Vazquez 18 February 2020, 17:25:52 UTC bpf: Do not grab the bucket spinlock by default on htab batch ops Grabbing the spinlock for every bucket even if it's empty, was causing significant perfomance cost when traversing htab maps that have only a few entries. This patch addresses the issue by checking first the bucket_cnt, if the bucket has some entries then we go and grab the spinlock and proceed with the batching. Tested with a htab of size 50K and different value of populated entries. Before: Benchmark Time(ns) CPU(ns) --------------------------------------------- BM_DumpHashMap/1 2759655 2752033 BM_DumpHashMap/10 2933722 2930825 BM_DumpHashMap/200 3171680 3170265 BM_DumpHashMap/500 3639607 3635511 BM_DumpHashMap/1000 4369008 4364981 BM_DumpHashMap/5k 11171919 11134028 BM_DumpHashMap/20k 69150080 69033496 BM_DumpHashMap/39k 190501036 190226162 After: Benchmark Time(ns) CPU(ns) --------------------------------------------- BM_DumpHashMap/1 202707 200109 BM_DumpHashMap/10 213441 210569 BM_DumpHashMap/200 478641 472350 BM_DumpHashMap/500 980061 967102 BM_DumpHashMap/1000 1863835 1839575 BM_DumpHashMap/5k 8961836 8902540 BM_DumpHashMap/20k 69761497 69322756 BM_DumpHashMap/39k 187437830 186551111 Fixes: 057996380a42 ("bpf: Add batch ops to all htab bpf map") Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200218172552.215077-1-brianvv@google.com 19 February 2020, 23:59:30 UTC
c54d209 Brett Creeley 18 February 2020, 21:22:06 UTC ice: Wait for VF to be reset/ready before configuration The configuration/command below is failing when the VF in the xml file is already bound to the host iavf driver. pci_0000_af_0_0.xml: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0x0000' bus='0xaf' slot='0x0' function='0x0'/> </source> <mac address='00:de:ad:00:11:01'/> </interface> > virsh attach-device domain_name pci_0000_af_0_0.xml error: Failed to attach device from pci_0000_af_0_0.xml error: Cannot set interface MAC/vlanid to 00:de:ad:00:11:01/0 for ifname ens1f1 vf 0: Device or resource busy This is failing because the VF has not been completely removed/reset after being unbound (via the virsh command above) from the host iavf driver and ice_set_vf_mac() checks if the VF is disabled before waiting for the reset to finish. Fix this by waiting for the VF remove/reset process to happen before checking if the VF is disabled. Also, since many functions for VF administration on the PF were more or less calling the same 3 functions (ice_wait_on_vf_reset(), ice_is_vf_disabled(), and ice_check_vf_init()) move these into the helper function ice_check_vf_ready_for_cfg(). Then call this function in any flow that attempts to configure/query a VF from the PF. Lastly, increase the maximum wait time in ice_wait_on_vf_reset() to 800ms, and modify/add the #define(s) that determine the wait time. This was done for robustness because in rare/stress cases VF removal can take a max of ~800ms and previously the wait was a max of ~300ms. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 19 February 2020, 19:50:41 UTC
8a55c08 Michal Swiatkowski 13 February 2020, 21:31:24 UTC ice: Don't tell the OS that link is going down Remove code that tell the OS that link is going down when user change flow control via ethtool. When link is up it isn't certain that link goes down after 0x0605 aq command. If link doesn't go down, OS thinks that link is down, but physical link is up. To reset this state user have to take interface down and up. If link goes down after 0x0605 command, FW send information about that and after that driver tells the OS that the link goes down. So this code in ethtool is unnecessary. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 19 February 2020, 19:50:41 UTC
840f8ad Brett Creeley 13 February 2020, 21:31:23 UTC ice: Don't reject odd values of usecs set by user Currently if a user sets an odd [tx|rx]-usecs value through ethtool, the request is denied because the hardware is set to have an ITR granularity of 2us. This caused poor customer experience. Fix this by aligning to a register allowed value, which results in rounding down. Also, print a once per ring container type message to be clear about our intentions. Also, change the ITR_TO_REG define to be the bitwise and of the ITR setting and the ICE_ITR_MASK. This makes the purpose of ITR_TO_REG more obvious. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 19 February 2020, 19:50:41 UTC
33c4acb Madhuparna Bhowmik 19 February 2020, 15:17:46 UTC bridge: br_stp: Use built-in RCU list checking list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 February 2020, 19:13:43 UTC
c3331d2 Dmitry Osipenko 19 February 2020, 15:01:22 UTC nfc: pn544: Fix occasional HW initialization failure The PN544 driver checks the "enable" polarity during of driver's probe and it's doing that by turning ON and OFF NFC with different polarities until enabling succeeds. It takes some time for the hardware to power-down, and thus, to deassert the IRQ that is raised by turning ON the hardware. Since the delay after last power-down of the polarity-checking process is missed in the code, the interrupt may trigger immediately after installing the IRQ handler (right after the checking is done), which results in IRQ handler trying to touch the disabled HW and ends with marking NFC as 'DEAD' during of the driver's probe: pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high pn544_hci_i2c 1-002a: NFC: invalid len byte shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead This patch fixes the occasional NFC initialization failure on Nexus 7 device. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 February 2020, 19:09:27 UTC
21b5ee5 Kim Phillips 19 February 2020, 17:52:43 UTC x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF Commit aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter") added support for access to the free-running counter via 'perf -e msr/irperf/', but when exercised, it always returns a 0 count: BEFORE: $ perf stat -e instructions,msr/irperf/ true Performance counter stats for 'true': 624,833 instructions 0 msr/irperf/ Simply set its enable bit - HWCR bit 30 - to make it start counting. Enablement is restricted to all machines advertising IRPERF capability, except those susceptible to an erratum that makes the IRPERF return bad values. That erratum occurs in Family 17h models 00-1fh [1], but not in F17h models 20h and above [2]. AFTER (on a family 17h model 31h machine): $ perf stat -e instructions,msr/irperf/ true Performance counter stats for 'true': 621,690 instructions 622,490 msr/irperf/ [1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors [2] Revision Guide for AMD Family 17h Models 30h-3Fh Processors The revision guides are available from the bugzilla Link below. [ bp: Massage commit message. ] Fixes: aaf248848db50 ("perf/x86/msr: Add AMD IRPERF (Instructions Retired) performance counter") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Link: http://lkml.kernel.org/r/20200214201805.13830-1-kim.phillips@amd.com 19 February 2020, 19:01:54 UTC
a7a9456 Amol Grover 19 February 2020, 10:00:11 UTC net: hsr: Pass lockdep expression to RCU lists node_db is traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of hsr->list_lock. Hence, add corresponding lockdep expression to silence false-positive warnings, and harden RCU lists. Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 February 2020, 18:55:42 UTC
7822dee David S. Miller 19 February 2020, 18:31:26 UTC Merge tag 'mlx5-fixes-2020-02-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-02-18 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v5.3 ('net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa') For -stable v5.4 ('net/mlx5: DR, Fix matching on vport gvmi') ('net/mlx5e: Fix crash in recovery flow without devlink reporter') For -stable v5.5 ('net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY') ('net/mlx5e: Don't clear the whole vf config when switching modes') ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 19 February 2020, 18:31:26 UTC
4b20576 Linus Torvalds 19 February 2020, 17:34:25 UTC Merge tag 'iommu-fixes-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Compile warning fix for the Intel IOMMU driver - Fix kdump boot with Intel IOMMU enabled and in passthrough mode - Disable AMD IOMMU on a Laptop/Embedded platform because the delay it introduces in DMA transactions causes screen flickering there with 4k monitors - Make domain_free function in QCOM IOMMU driver robust and not leak memory/dereference NULL pointers - Fix ARM-SMMU module parameter prefix names * tag 'iommu-fixes-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Restore naming of driver parameter prefix iommu/qcom: Fix bogus detach logic iommu/amd: Disable IOMMU on Stoney Ridge systems iommu/vt-d: Simplify check in identity_mapping() iommu/vt-d: Remove deferred_attach_domain() iommu/vt-d: Do deferred attachment in iommu_need_mapping() iommu/vt-d: Move deferred device attachment into helper function iommu/vt-d: Add attach_deferred() helper iommu/vt-d: Fix compile warning from intel-svm.h 19 February 2020, 17:34:25 UTC
fa079ba Linus Torvalds 19 February 2020, 17:26:59 UTC Merge tag 'sound-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only largish change in this pull request is about the revert of the recent max98090 and its relevant patches due to regressions. Other than that, all small fixes for ALSA core (covering KCSAN fuzzer warnings in ALSA sequencer and rawmidi), Intel SOF HD-audio fixes, AMD ACP fixes, usual HD-audio quirks, and various ASoC fixes" * tag 'sound-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs ALSA: hda/realtek - Apply quirk for yet another MSI laptop ASoC: sun8i-codec: Fix setting DAI data format ALSA: hda/realtek - Apply quirk for MSI GP63, too ASoC: amd: ACP needs to be powered off in BIOS. ASoC: hdmi-codec: set plugged_cb to NULL when component removing ASoC: dapm: remove snd_soc_dapm_put_enum_double_locked ASoC: max98090: revert invalid fix for handling SHDN ALSA: rawmidi: Avoid bit fields for state flags ALSA: seq: Fix concurrent access to queue current tick/time ALSA: seq: Avoid concurrent access to queue flags ASoC: codec2codec: avoid invalid/double-free of pcm runtime ASoC: amd: Buffer Size instead of MAX Buffer ASoC: SOF: Intel: hda: move i915 init earlier ASoC: SOF: Intel: hda: fix ordering bug in resume flow ALSA: hda: do not override bus codec_mask in link_get() ASoC: atmel: fix atmel_ssc_set_audio link failure ASoC: fsl_sai: Fix exiting path on probing failure 19 February 2020, 17:26:59 UTC
1575585 Keith Busch 19 February 2020, 15:59:36 UTC nvme: Fix uninitialized-variable warning gcc may detect a false positive on nvme using an unintialized variable if setting features fails. Since this is not a fast path, explicitly initialize this variable to suppress the warning. Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> 19 February 2020, 16:40:57 UTC
2db01da Julian Wiedmann 11 February 2020, 08:27:38 UTC s390/qdio: fill SBALEs with absolute addresses sbale->addr holds an absolute address (or for some FCP usage, an opaque request ID), and should only be used with proper virt/phys translation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 19 February 2020, 16:26:32 UTC
e9091ff Julian Wiedmann 10 February 2020, 09:48:11 UTC s390/qdio: fill SL with absolute addresses As the comment says, sl->sbal holds an absolute address. qeth currently solves this through wild casting, while zfcp doesn't care. Handle this properly in the code that actually builds the SL. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio] Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 19 February 2020, 16:26:32 UTC
df6d4f9 H.J. Lu 16 January 2020, 20:46:51 UTC x86/boot/compressed: Don't declare __force_order in kaslr_64.c GCC 10 changed the default to -fno-common, which leads to LD arch/x86/boot/compressed/vmlinux ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; \ arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1 Since __force_order is already provided in pgtable_64.c, there is no need to declare __force_order in kaslr_64.c. Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200124181811.4780-1-hjl.tools@gmail.com 19 February 2020, 16:23:59 UTC
6c62ce8 Alex Deucher 18 February 2020, 18:20:30 UTC drm/amdgpu/display: clean up hdcp workqueue handling Use the existence of the workqueue itself to determine when to enable HDCP features rather than sprinkling asic checks all over the code. Also add a check for the existence of the hdcp workqueue in the irq handling on the off chance we get and HPD RX interrupt with the CP bit set. This avoids a crash if the driver doesn't support HDCP for a particular asic. Fixes: 96a3b32e67236f ("drm/amd/display: only enable HDCP for DCN+") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206519 Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 19 February 2020, 16:03:24 UTC
debcf83 changzhu 14 February 2020, 02:57:17 UTC drm/amdgpu: add is_raven_kicker judgement for raven1 The rlc version of raven_kicer_rlc is different from the legacy rlc version of raven_rlc. So it needs to add a judgement function for raven_kicer_rlc and avoid disable GFXOFF when loading raven_kicer_rlc. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 19 February 2020, 15:33:42 UTC
98f7b86 Andy Shevchenko 12 February 2020, 10:32:18 UTC nvme-pci: Use single IRQ vector for old Apple models People reported that old Apple machines are not working properly if the non-first IRQ vector is in use. Set quirk for that models to limit IRQ to use first vector only. Based on original patch by GitHub user npx001. Link: https://github.com/Dunedan/mbp-2016-linux/issues/9 Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Keith Busch <kbusch@kernel.org> 19 February 2020, 15:30:58 UTC
1fae37a Shyjumon N 06 February 2020, 20:17:25 UTC nvme/pci: Add sleep quirk for Samsung and Toshiba drives The Samsung SSD SM981/PM981 and Toshiba SSD KBG40ZNT256G on the Lenovo C640 platform experience runtime resume issues when the SSDs are kept in sleep/suspend mode for long time. This patch applies the 'Simple Suspend' quirk to these configurations. With this patch, the issue had not been observed in a 1+ day test. Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shyjumon N <shyjumon.n@intel.com> Signed-off-by: Keith Busch <kbusch@kernel.org> 19 February 2020, 15:29:39 UTC
d0022c0 Will Deacon 19 February 2020, 10:19:13 UTC arm64: memory: Add missing brackets to untagged_addr() macro Add brackets around the evaluation of the 'addr' parameter to the untagged_addr() macro so that the cast to 'u64' applies to the result of the expression. Cc: <stable@vger.kernel.org> Fixes: 597399d0cb91 ("arm64: tags: Preserve tags for addresses translated via TTBR1") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will@kernel.org> 19 February 2020, 13:41:33 UTC
140588b Stephen Kitt 14 February 2020, 17:26:28 UTC s390: remove obsolete ieee_emulation_warnings s390 math emulation was removed with commit 5a79859ae0f3 ("s390: remove 31 bit support"), rendering ieee_emulation_warnings useless. The code still built because it was protected by CONFIG_MATHEMU, which was no longer selectable. This patch removes the sysctl_ieee_emulation_warnings declaration and the sysctl entry declaration. Link: https://lkml.kernel.org/r/20200214172628.3598516-1-steve@sk2.org Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 19 February 2020, 12:51:46 UTC
ab362ff Will Deacon 18 February 2020, 17:27:56 UTC iommu/arm-smmu: Restore naming of driver parameter prefix Extending the Arm SMMU driver to allow for modular builds changed KBUILD_MODNAME to be "arm_smmu_mod" so that a single module could be built from the multiple existing object files without the need to rename any source files. This inadvertently changed the name of the driver parameters, which may lead to runtime issues if bootloaders are relying on the old names for correctness (e.g. "arm-smmu.disable_bypass=0"). Although MODULE_PARAM_PREFIX can be overridden to restore the old naming for builtin parameters, only the new name is matched by modprobe and so loading the driver as a module would cause parameters specified on the kernel command line to be ignored. Instead, rename "arm_smmu_mod" to "arm_smmu". Whilst it's a bit of a bodge, this allows us to create a single module without renaming any files and makes use of the fact that underscores and hyphens can be used interchangeably in parameter names. Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Reported-by: Li Yang <leoyang.li@nxp.com> Fixes: cd221bd24ff5 ("iommu/arm-smmu: Allow building as a module") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 19 February 2020, 11:03:21 UTC
faf305c Robin Murphy 18 February 2020, 18:12:41 UTC iommu/qcom: Fix bogus detach logic Currently, the implementation of qcom_iommu_domain_free() is guaranteed to do one of two things: WARN() and leak everything, or dereference NULL and crash. That alone is terrible, but in fact the whole idea of trying to track the liveness of a domain via the qcom_domain->iommu pointer as a sanity check is full of fundamentally flawed assumptions. Make things robust and actually functional by not trying to be quite so clever. Reported-by: Brian Masney <masneyb@onstation.org> Tested-by: Brian Masney <masneyb@onstation.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Stephan Gerhold <stephan@gerhold.net> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Joerg Roedel <jroedel@suse.de> 19 February 2020, 10:55:48 UTC
3dfee47 Kai-Heng Feng 10 February 2020, 07:51:15 UTC iommu/amd: Disable IOMMU on Stoney Ridge systems Serious screen flickering when Stoney Ridge outputs to a 4K monitor. Use identity-mapping and PCI ATS doesn't help this issue. According to Alex Deucher, IOMMU isn't enabled on Windows, so let's do the same here to avoid screen flickering on 4K monitor. Cc: Alex Deucher <alexander.deucher@amd.com> Bug: https://gitlab.freedesktop.org/drm/amd/issues/961 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 19 February 2020, 10:08:24 UTC
13a7e45 Erez Shitrit 14 January 2020, 07:27:27 UTC net/mlx5: DR, Handle reformat capability over sw-steering tables On flow table creation, send the relevant flags according to what the FW currently supports. When FW doesn't support reformat option over SW-steering managed table, the driver shouldn't pass this. Fixes: 988fd6b32d07 ("net/mlx5: DR, Pass table flags at creation to lower layer") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 February 2020, 03:01:20 UTC
7678162 Paul Blakey 31 December 2019, 15:04:15 UTC net/mlx5: Fix lowest FDB pool size The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 February 2020, 03:01:20 UTC
383de10 Dmytro Linkin 12 February 2020, 09:32:39 UTC net/mlx5e: Don't clear the whole vf config when switching modes There is no need to reset all vf config (except link state) between legacy and switchdev modes changes. Also, set link state to AUTO, when legacy enabled. Fixes: 3b83b6c2e024 ("net/mlx5e: Clear VF config when switching modes") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 February 2020, 03:01:19 UTC
52d2149 Hamdan Igbaria 05 February 2020, 12:31:12 UTC net/mlx5: DR, Fix matching on vport gvmi Set vport gvmi in the tag, only when source gvmi is set in the bit mask. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 February 2020, 03:01:19 UTC
1ad6c43 Aya Levin 12 February 2020, 13:17:25 UTC net/mlx5e: Fix crash in recovery flow without devlink reporter When health reporters are not supported, recovery function is invoked directly, not via devlink health reporters. In this direct flow, the recover function input parameter was passed incorrectly and is causing a kernel oops. This patch is fixing the input parameter. Following call trace is observed on rx error health reporting. Internal error: Oops: 96000007 [#1] PREEMPT SMP Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703) Call trace: mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core] mlx5e_health_report+0x60/0x6c [mlx5_core] mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core] mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core] process_one_work+0x168/0x3d0 worker_thread+0x58/0x3d0 kthread+0x108/0x134 Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 February 2020, 03:01:19 UTC
5ee090e Aya Levin 09 December 2019, 12:08:18 UTC net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY Initialize RQ doorbell counters to zero prior to moving an RQ from RST to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor ID on the completion is reset. The doorbell record must comply. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reported-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 February 2020, 03:01:19 UTC
3d9c5e0 Huy Nguyen 03 February 2020, 22:32:18 UTC net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa cannot take mutex lock. Two possible issues can happen: 1. User at the same time change vepa mode via RTM_SETLINK command. 2. User at the same time change the switchdev mode via devlink netlink interface. Case 1 cannot happen because rtnl executes one message in order. Case 2 can happen but we do not expect user to change the switchdev mode when changing vepa. Even if a user does it, so he will read a value which is no longer valid. Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 19 February 2020, 03:01:18 UTC
929a3af Pavel Begunkov 18 February 2020, 21:19:09 UTC io_uring: fix use-after-free by io_cleanup_req() io_cleanup_req() should be called before req->io is freed, and so shouldn't be after __io_free_req() -> __io_req_aux_free(). Also, it will be ignored for in io_free_req_many(), which use __io_req_aux_free(). Place cleanup_req() into __io_req_aux_free(). Fixes: 99bc4c38537d774 ("io_uring: fix iovec leaks") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 19 February 2020, 00:12:23 UTC
7c8c169 David S. Miller 18 February 2020, 23:44:13 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net This batch contains Netfilter fixes for net: 1) Restrict hashlimit size to 1048576, from Cong Wang. 2) Check for offload flags from nf_flow_table_offload_setup(), this fixes a crash in case the hardware offload is disabled. From Florian Westphal. 3) Three preparation patches to extend the conntrack clash resolution, from Florian. 4) Extend clash resolution to deal with DNS packets from the same flow racing to set up the NAT configuration. 5) Small documentation fix in pipapo, from Stefano Brivio. 6) Remove misleading unlikely() from pipapo_refill(), also from Stefano. 7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually triggering another problem, still under discussion, another patch to fix this will follow up. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 23:44:13 UTC
e75fd33 Filipe Manana 13 February 2020, 12:29:50 UTC Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents In btrfs_wait_ordered_range() once we find an ordered extent that has finished with an error we exit the loop and don't wait for any other ordered extents that might be still in progress. All the users of btrfs_wait_ordered_range() expect that there are no more ordered extents in progress after that function returns. So past fixes such like the ones from the two following commits: ff612ba7849964 ("btrfs: fix panic during relocation after ENOSPC before writeback happens") 28aeeac1dd3080 ("Btrfs: fix panic when starting bg cache writeout after IO error") don't work when there are multiple ordered extents in the range. Fix that by making btrfs_wait_ordered_range() wait for all ordered extents even after it finds one that had an error. Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554 CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 18 February 2020, 23:39:08 UTC
b778cf9 Josef Bacik 13 February 2020, 15:47:31 UTC btrfs: fix bytes_may_use underflow in prealloc error condtition I hit the following warning while running my error injection stress testing: WARNING: CPU: 3 PID: 1453 at fs/btrfs/space-info.h:108 btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs] RIP: 0010:btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs] Call Trace: btrfs_free_reserved_data_space+0x4f/0x70 [btrfs] __btrfs_prealloc_file_range+0x378/0x470 [btrfs] elfcorehdr_read+0x40/0x40 ? elfcorehdr_read+0x40/0x40 ? btrfs_commit_transaction+0xca/0xa50 [btrfs] ? dput+0xb4/0x2a0 ? btrfs_log_dentry_safe+0x55/0x70 [btrfs] ? btrfs_sync_file+0x30e/0x420 [btrfs] ? do_fsync+0x38/0x70 ? __x64_sys_fdatasync+0x13/0x20 ? do_syscall_64+0x5b/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens if we fail to insert our reserved file extent. At this point we've already converted our reservation from ->bytes_may_use to ->bytes_reserved. However once we break we will attempt to free everything from [cur_offset, end] from ->bytes_may_use, but our extent reservation will overlap part of this. Fix this problem by adding ins.offset (our extent allocation size) to cur_offset so we remove the actual remaining part from ->bytes_may_use. I validated this fix using my inject-error.py script python inject-error.py -o should_fail_bio -t cache_save_setup -t \ __btrfs_prealloc_file_range \ -t insert_reserved_file_extent.constprop.0 \ -r "-5" ./run-fsstress.sh where run-fsstress.sh simply mounts and runs fsstress on a disk. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 18 February 2020, 23:39:08 UTC
bd72717 Josef Bacik 13 February 2020, 15:47:30 UTC btrfs: handle logged extent failure properly If we're allocating a logged extent we attempt to insert an extent record for the file extent directly. We increase space_info->bytes_reserved, because the extent entry addition will call btrfs_update_block_group(), which will convert the ->bytes_reserved to ->bytes_used. However if we fail at any point while inserting the extent entry we will bail and leave space on ->bytes_reserved, which will trigger a WARN_ON() on umount. Fix this by pinning the space if we fail to insert, which is what happens in every other failure case that involves adding the extent entry. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 18 February 2020, 23:39:08 UTC
1e90315 Josef Bacik 13 February 2020, 15:47:29 UTC btrfs: do not check delayed items are empty for single transaction cleanup btrfs_assert_delayed_root_empty() will check if the delayed root is completely empty, but this is a filesystem-wide check. On cleanup we may have allowed other transactions to begin, for whatever reason, and thus the delayed root is not empty. So remove this check from cleanup_one_transation(). This however can stay in btrfs_cleanup_transaction(), because it checks only after all of the transactions have been properly cleaned up, and thus is valid. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 18 February 2020, 23:36:41 UTC
315bf8e Josef Bacik 13 February 2020, 15:47:28 UTC btrfs: reset fs_root to NULL on error in open_ctree While running my error injection script I hit a panic when we tried to clean up the fs_root when freeing the fs_root. This is because fs_info->fs_root == PTR_ERR(-EIO), which isn't great. Fix this by setting fs_info->fs_root = NULL; if we fail to read the root. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 18 February 2020, 23:36:35 UTC
81f7eb0 Jeff Mahoney 11 February 2020, 07:25:37 UTC btrfs: destroy qgroup extent records on transaction abort We clean up the delayed references when we abort a transaction but we leave the pending qgroup extent records behind, leaking memory. This patch destroys the extent records when we destroy the delayed refs and makes sure ensure they're gone before releasing the transaction. Fixes: 3368d001ba5d ("btrfs: qgroup: Record possible quota-related extent for qgroup.") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> [ Rebased to latest upstream, remove to_qgroup() helper, use rbtree_postorder_for_each_entry_safe() wrapper ] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 18 February 2020, 23:35:54 UTC
9eb425b Christophe Leroy 18 February 2020, 14:09:29 UTC powerpc/entry: Fix an #if which should be an #ifdef in entry_32.S Fixes: 12c3f1fd87bf ("powerpc/32s: get rid of CPU_FTR_601 feature") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a99fc0ad65b87a1ba51cfa3e0e9034ee294c3e07.1582034961.git.christophe.leroy@c-s.fr 18 February 2020, 23:35:22 UTC
0a44cac Linus Torvalds 18 February 2020, 23:06:38 UTC Merge tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - give command line cma= precedence over the CONFIG_ option (Nicolas Saenz Julienne) - always allow 32-bit DMA, even for weirdly placed ZONE_DMA - improve the debug printks when memory is not addressable, to help find problems with swiotlb initialization * tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: improve DMA mask overflow reporting dma-direct: improve swiotlb error reporting dma-direct: relax addressability checks in dma_direct_supported dma-contiguous: CMA: give precedence to cmdline 18 February 2020, 23:06:38 UTC
2b72104 Linus Torvalds 18 February 2020, 22:54:30 UTC Merge tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "Two bug fixes" * tag 'tpmdd-next-20200217' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Initialize crypto_id of allocated_banks to HASH_ALGO__LAST tpm: Revert tpm_tis_spi_mod.ko to tpm_tis_spi.ko. 18 February 2020, 22:54:30 UTC
6551d5c Linus Torvalds 18 February 2020, 18:12:58 UTC pipe: make sure to wake up everybody when the last reader/writer closes Andrei Vagin reported that commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") broke one of the CRIU tests. He even has a trivial reproducer: #include <unistd.h> #include <sys/types.h> #include <sys/wait.h> int main() { int p[2]; pid_t p1, p2; int status; if (pipe(p) == -1) return 1; p1 = fork(); if (p1 == 0) { close(p[1]); read(p[0], &status, sizeof(status)); return 0; } p2 = fork(); if (p2 == 0) { close(p[1]); read(p[0], &status, sizeof(status)); return 0; } sleep(1); close(p[1]); wait(&status); wait(&status); return 0; } and the problem - once he points it out - is obvious. We use these nice exclusive waits, but when the last writer goes away, it then needs to wake up _every_ reader (and conversely, the last reader disappearing needs to wake every writer, of course). In fact, when going through this, we had several small oddities around how to wake things. We did in fact wake every reader when we changed the size of the pipe buffers. But that's entirely pointless, since that just acts as a possible source of new space - no new data to read. And when we change the size of the buffer, we don't need to wake all writers even when we add space - that case acts just as if somebody made space by reading, and any writer that finds itself not filling it up entirely will wake the next one. On the other hand, on the exit path, we tried to limit the wakeups with the proper poll keys etc, which is entirely pointless, because at that point we obviously need to wake up everybody. So don't do that: just wake up everybody - but only do that if the counts changed to zero. So fix those non-IO wakeups to be more proper: space change doesn't add any new data, but it might make room for writers, so it wakes up a writer. And the actual changes to reader/writer counts should wake up everybody, since everybody is affected (ie readers will all see EOF if the writers have gone away, and writers will all get EPIPE if all readers have gone away). Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Reported-and-tested-by: Andrei Vagin <avagin@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 February 2020, 22:34:36 UTC
9a77120 Stefano Brivio 14 February 2020, 17:14:14 UTC netfilter: nft_set_pipapo: Don't abuse unlikely() in pipapo_refill() I originally used unlikely() in the if (match_only) clause, which we hit on the mapping table for the last field in a set, to ensure we avoid branching to the rest of for loop body, which is executed more frequently. However, Pablo reports, this is confusing as it gives the impression that this is not a common case, and it's actually not the intended usage of unlikely(). I couldn't observe any statistical difference in matching rates on x864_64 and aarch64 without it, so just drop it. Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 18 February 2020, 21:07:09 UTC
bd97ad5 Stefano Brivio 14 February 2020, 17:14:13 UTC netfilter: nft_set_pipapo: Fix mapping table example in comments In both insertion and lookup examples, the two element pointers of rule mapping tables were swapped. Fix that. Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 18 February 2020, 21:06:54 UTC
a2cfb96 Madhuparna Bhowmik 18 February 2020, 19:58:20 UTC flow_table.c: Use built-in RCU list checking hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:46:27 UTC
53742e6 Madhuparna Bhowmik 18 February 2020, 19:58:02 UTC datapath.c: Use built-in RCU list checking hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:46:27 UTC
fed4842 Madhuparna Bhowmik 18 February 2020, 19:57:42 UTC vport.c: Use built-in RCU list checking hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:46:27 UTC
7790614 Madhuparna Bhowmik 18 February 2020, 19:54:25 UTC meter.c: Use built-in RCU list checking hlist_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:46:26 UTC
9facfdb Madhuparna Bhowmik 18 February 2020, 18:41:32 UTC netlabel_domainhash.c: Use built-in RCU list checking list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:44:23 UTC
8c70c3d Madhuparna Bhowmik 18 February 2020, 18:17:18 UTC net: netlabel: Use built-in RCU list checking list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:43:06 UTC
379349e Paolo Abeni 18 February 2020, 17:15:44 UTC Revert "net: dev: introduce support for sch BYPASS for lockless qdisc" This reverts commit ba27b4cdaaa66561aaedb2101876e563738d36fe Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc"). I can't find any working solution other than a plain revert. This will introduce some minor performance regressions for pfifo_fast qdisc. I plan to address them in net-next with more indirect call wrapper boilerplate for qdiscs. Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Fixes: ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:37:45 UTC
29f20dd Jonathan Neuschäfer 18 February 2020, 15:47:01 UTC net: phy: broadcom: Fix a typo ("firsly") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:31:25 UTC
d99bfed Florian Westphal 17 February 2020, 15:54:38 UTC mptcp: fix bogus socket flag values Dan Carpenter reports static checker warnings due to bogus BIT() usage: net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number [..] This is harmless (we use bits 1 & 2 instead of 0 and 1), but would break eventually when adding BIT(5) (or 6, depends on size of 'long'). Just use 0 and 1, the values are only passed to test/set/clear_bit functions. Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:05:53 UTC
af6565a Michal Kalderon 17 February 2020, 11:37:18 UTC qede: Fix race between rdma destroy workqueue and link change event If an event is added while the rdma workqueue is being destroyed it could lead to several races, list corruption, null pointer dereference during queue_work or init_queue. This fixes the race between the two flows which can occur during shutdown. A kref object and a completion object are added to the rdma_dev structure, these are initialized before the workqueue is created. The refcnt is used to indicate work is being added to the workqueue and ensures the cleanup flow won't start while we're in the middle of adding the event. Once the work is added, the refcnt is decreased and the cleanup flow is safe to run. Fixes: cee9fbd8e2e ("qede: Add qedr framework") Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 20:05:53 UTC
8b978be Greg Kroah-Hartman 18 February 2020, 18:39:29 UTC Merge tag 'thunderbolt-fix-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.6-rc3 Single fix that orders the THUNDERBOLT MAINTAINERS record according to parse-maintainers.pl. * tag 'thunderbolt-fix-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: MAINTAINERS: Sort entries in database for THUNDERBOLT 18 February 2020, 18:39:29 UTC
297a31e Dan Carpenter 17 February 2020, 14:39:45 UTC io_uring: remove unnecessary NULL checks The "kmsg" pointer can't be NULL and we have already dereferenced it so a check here would be useless. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 February 2020, 18:22:02 UTC
dd1f630 Vincenzo Frascino 18 February 2020, 16:49:06 UTC arm64: lse: Fix LSE atomics with LLVM Commit e0d5896bd356 ("arm64: lse: fix LSE atomics with LLVM's integrated assembler") broke the build when clang is used in connjunction with the binutils assembler ("-no-integrated-as"). This happens because __LSE_PREAMBLE is defined as ".arch armv8-a+lse", which overrides the version of the CPU architecture passed via the "-march" paramter to gas: $ aarch64-none-linux-gnu-as -EL -I ./arch/arm64/include -I ./arch/arm64/include/generated -I ./include -I ./include -I ./arch/arm64/include/uapi -I ./arch/arm64/include/generated/uapi -I ./include/uapi -I ./include/generated/uapi -I ./init -I ./init -march=armv8.3-a -o init/do_mounts.o /tmp/do_mounts-d7992a.s /tmp/do_mounts-d7992a.s: Assembler messages: /tmp/do_mounts-d7992a.s:1959: Error: selected processor does not support `autiasp' /tmp/do_mounts-d7992a.s:2021: Error: selected processor does not support `paciasp' /tmp/do_mounts-d7992a.s:2157: Error: selected processor does not support `autiasp' /tmp/do_mounts-d7992a.s:2175: Error: selected processor does not support `paciasp' /tmp/do_mounts-d7992a.s:2494: Error: selected processor does not support `autiasp' Fix the issue by replacing ".arch armv8-a+lse" with ".arch_extension lse". Sami confirms that the clang integrated assembler does now support the '.arch_extension' directive, so this change will be fine even for LTO builds in future. Fixes: e0d5896bd356cd ("arm64: lse: fix LSE atomics with LLVM's integrated assembler") Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reported-by: Amit Kachhap <Amit.Kachhap@arm.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org> 18 February 2020, 18:10:49 UTC
1ddb32d Joerg Roedel 17 February 2020, 16:29:55 UTC iommu/vt-d: Simplify check in identity_mapping() The function only has one call-site and there it is never called with dummy or deferred devices. Simplify the check in the function to account for that. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: stable@vger.kernel.org # v5.5 Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 18 February 2020, 16:21:51 UTC
96d170f Joerg Roedel 17 February 2020, 16:27:44 UTC iommu/vt-d: Remove deferred_attach_domain() The function is now only a wrapper around find_domain(). Remove the function and call find_domain() directly at the call-sites. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: stable@vger.kernel.org # v5.5 Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 18 February 2020, 16:21:51 UTC
a11bfde Joerg Roedel 17 February 2020, 16:20:59 UTC iommu/vt-d: Do deferred attachment in iommu_need_mapping() The attachment of deferred devices needs to happen before the check whether the device is identity mapped or not. Otherwise the check will return wrong results, cause warnings boot failures in kdump kernels, like WARNING: CPU: 0 PID: 318 at ../drivers/iommu/intel-iommu.c:592 domain_get_iommu+0x61/0x70 [...] Call Trace: __intel_map_single+0x55/0x190 intel_alloc_coherent+0xac/0x110 dmam_alloc_attrs+0x50/0xa0 ahci_port_start+0xfb/0x1f0 [libahci] ata_host_start.part.39+0x104/0x1e0 [libata] With the earlier check the kdump boot succeeds and a crashdump is written. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: stable@vger.kernel.org # v5.5 Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 18 February 2020, 16:21:51 UTC
034d98c Joerg Roedel 17 February 2020, 16:16:19 UTC iommu/vt-d: Move deferred device attachment into helper function Move the code that does the deferred device attachment into a separate helper function. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: stable@vger.kernel.org # v5.5 Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 18 February 2020, 16:21:51 UTC
1d46159 Joerg Roedel 17 February 2020, 16:12:37 UTC iommu/vt-d: Add attach_deferred() helper Implement a helper function to check whether a device's attach process is deferred. Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper") Cc: stable@vger.kernel.org # v5.5 Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 18 February 2020, 16:21:51 UTC
113e6b7 Toke Høiland-Jørgensen 17 February 2020, 17:17:01 UTC libbpf: Sanitise internal map names so they are not rejected by the kernel The kernel only accepts map names with alphanumeric characters, underscores and periods in their name. However, the auto-generated internal map names used by libbpf takes their prefix from the user-supplied BPF object name, which has no such restriction. This can lead to "Invalid argument" errors when trying to load a BPF program using global variables. Fix this by sanitising the map names, replacing any non-allowed characters with underscores. Fixes: d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200217171701.215215-1-toke@redhat.com 18 February 2020, 14:34:20 UTC
f25975f Toke Høiland-Jørgensen 18 February 2020, 13:03:34 UTC bpf, uapi: Remove text about bpf_redirect_map() giving higher performance The performance of bpf_redirect() is now roughly the same as that of bpf_redirect_map(). However, David Ahern pointed out that the header file has not been updated to reflect this, and still says that a significant performance increase is possible when using bpf_redirect_map(). Remove this text from the bpf_redirect_map() description, and reword the description in bpf_redirect() slightly. Also fix the 'Return' section of the bpf_redirect_map() documentation. Fixes: 1d233886dd90 ("xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200218130334.29889-1-toke@redhat.com 18 February 2020, 14:31:31 UTC
5780b9a Tianjia Zhang 10 February 2020, 12:44:40 UTC ima: add sm3 algorithm to hash algorithm configuration list sm3 has been supported by the ima hash algorithm, but it is not yet in the Kconfig configuration list. After adding, both ima and tpm2 can support sm3 well. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> 18 February 2020, 12:35:49 UTC
6a30e1b Tianjia Zhang 10 February 2020, 12:44:39 UTC crypto: rename sm3-256 to sm3 in hash_algo_name The name sm3-256 is defined in hash_algo_name in hash_info, but the algorithm name implemented in sm3_generic.c is sm3, which will cause the sm3-256 algorithm to be not found in some application scenarios of the hash algorithm, and an ENOENT error will occur. For example, IMA, keys, and other subsystems that reference hash_algo_name all use the hash algorithm of sm3. Fixes: 5ca4c20cfd37 ("keys, trusted: select hash algorithm for TPM2 chips") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Pascal van Leeuwen <pvanleeuwen@rambus.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> 18 February 2020, 12:35:49 UTC
3be54d5 Javier Martinez Canillas 17 February 2020, 11:39:47 UTC efi: Only print errors about failing to get certs if EFI vars are found If CONFIG_LOAD_UEFI_KEYS is enabled, the kernel attempts to load the certs from the db, dbx and MokListRT EFI variables into the appropriate keyrings. But it just assumes that the variables will be present and prints an error if the certs can't be loaded, even when is possible that the variables may not exist. For example the MokListRT variable will only be present if shim is used. So only print an error message about failing to get the certs list from an EFI variable if this is found. Otherwise these printed errors just pollute the kernel log ring buffer with confusing messages like the following: [ 5.427251] Couldn't get size: 0x800000000000000e [ 5.427261] MODSIGN: Couldn't get UEFI db list [ 5.428012] Couldn't get size: 0x800000000000000e [ 5.428023] Couldn't get UEFI MokListRT Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> 18 February 2020, 12:35:48 UTC
3855360 Takashi Iwai 18 February 2020, 12:33:39 UTC Merge tag 'asoc-fix-v5.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.6 A few fixes sent in since the merge window, none of them with global impact but all important for the users they affect. 18 February 2020, 12:33:39 UTC
066bc35 Oliver O'Halloran 17 February 2020, 04:13:43 UTC powerpc/xmon: Fix whitespace handling in getstring() The ls (lookup symbol) and zr (reboot) commands use xmon's getstring() helper to read a string argument from the xmon prompt. This function skips over leading whitespace, but doesn't check if the first "non-whitespace" character is a newline which causes some odd behaviour (<enter> indicates a the enter key was pressed): 0:mon> ls printk<enter> printk: c0000000001680c4 0:mon> ls<enter> printk<enter> Symbol ' printk' not found. 0:mon> With commit 2d9b332d99b ("powerpc/xmon: Allow passing an argument to ppc_md.restart()") we have a similar problem with the zr command. Previously zr took no arguments so "zr<enter> would trigger a reboot. With that patch applied a second newline needs to be sent in order for the reboot to occur. Fix this by checking if the leading whitespace ended on a newline: 0:mon> ls<enter> Symbol '' not found. Fixes: 2d9b332d99b2 ("powerpc/xmon: Allow passing an argument to ppc_md.restart()") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200217041343.2454-1-oohall@gmail.com 18 February 2020, 10:31:12 UTC
477f348 Christophe Leroy 14 February 2020, 06:53:00 UTC powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK power_save_ppc32_restore() is called during exception entry, before re-enabling the MMU. It substracts KERNELBASE from the address of nap_save_msscr0 to access it. With CONFIG_VMAP_STACK enabled, data MMU translation has already been re-enabled, so power_save_ppc32_restore() has to access nap_save_msscr0 by its virtual address. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7bce32ccbab3ba3e3e0f27da6961bf6313df97ed.1581663140.git.christophe.leroy@c-s.fr 18 February 2020, 10:31:12 UTC
5a528eb Christophe Leroy 14 February 2020, 08:39:50 UTC powerpc/chrp: Fix enter_rtas() with CONFIG_VMAP_STACK With CONFIG_VMAP_STACK, data MMU has to be enabled to read data on the stack. Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d2330584f8c42d3039896e2b56f5d39676dc919c.1581669558.git.christophe.leroy@c-s.fr 18 February 2020, 10:31:11 UTC
232ca1e Christophe Leroy 15 February 2020, 10:14:25 UTC powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACK hash_page() needs to read page tables from kernel memory. When entire kernel memory is mapped by BATs, which is normally the case when CONFIG_STRICT_KERNEL_RWX is not set, it works even if the page hosting the page table is not referenced in the MMU hash table. However, if the page where the page table resides is not covered by a BAT, a DSI fault can be encountered from hash_page(), and it loops forever. This can happen when CONFIG_STRICT_KERNEL_RWX is selected and the alignment of the different regions is too small to allow covering the entire memory with BATs. This also happens when CONFIG_DEBUG_PAGEALLOC is selected or when booting with 'nobats' flag. Also, if the page containing the kernel stack is not present in the MMU hash table, registers cannot be saved and a recursive DSI fault is encountered. To allow hash_page() to properly do its job at all time and load the MMU hash table whenever needed, it must run with data MMU disabled. This means it must be called before re-enabling data MMU. To allow this, registers clobbered by hash_page() and create_hpte() have to be saved in the thread struct together with SRR0, SSR1, DAR and DSISR. It is also necessary to ensure that DSI prolog doesn't overwrite regs saved by prolog of the current running exception. That means: - DSI can only use SPRN_SPRG_SCRATCH0 - Exceptions must free SPRN_SPRG_SCRATCH0 before writing to the stack. This also fixes the Oops reported by Erhard when create_hpte() is called by add_hash_page(). Due to prolog size increase, a few more exceptions had to get split in two parts. Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Erhard F. <erhard_f@mailbox.org> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206501 Link: https://lore.kernel.org/r/64a4aa44686e9fd4b01333401367029771d9b231.1581761633.git.christophe.leroy@c-s.fr 18 February 2020, 10:31:11 UTC
2464cc4 Gustavo Luiz Duarte 11 February 2020, 03:38:29 UTC powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery After a treclaim, we expect to be in non-transactional state. If we don't clear the current thread's MSR[TS] before we get preempted, then tm_recheckpoint_new_task() will recheckpoint and we get rescheduled in suspended transaction state. When handling a signal caught in transactional state, handle_rt_signal64() calls get_tm_stackpointer() that treclaims the transaction using tm_reclaim_current() but without clearing the thread's MSR[TS]. This can cause the TM Bad Thing exception below if later we pagefault and get preempted trying to access the user's sigframe, using __put_user(). Afterwards, when we are rescheduled back into do_page_fault() (but now in suspended state since the thread's MSR[TS] was not cleared), upon executing 'rfid' after completion of the page fault handling, the exception is raised because a transition from suspended to non-transactional state is invalid. Unexpected TM Bad Thing exception at c00000000000de44 (msr 0x8000000302a03031) tm_scratch=800000010280b033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 25 PID: 15547 Comm: a.out Not tainted 5.4.0-rc2 #32 NIP: c00000000000de44 LR: c000000000034728 CTR: 0000000000000000 REGS: c00000003fe7bd70 TRAP: 0700 Not tainted (5.4.0-rc2) MSR: 8000000302a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[SE]> CR: 44000884 XER: 00000000 CFAR: c00000000000dda4 IRQMASK: 0 PACATMSCRATCH: 800000010280b033 GPR00: c000000000034728 c000000f65a17c80 c000000001662800 00007fffacf3fd78 GPR04: 0000000000001000 0000000000001000 0000000000000000 c000000f611f8af0 GPR08: 0000000000000000 0000000078006001 0000000000000000 000c000000000000 GPR12: c000000f611f84b0 c00000003ffcb200 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000f611f8140 GPR24: 0000000000000000 00007fffacf3fd68 c000000f65a17d90 c000000f611f7800 GPR28: c000000f65a17e90 c000000f65a17e90 c000000001685e18 00007fffacf3f000 NIP [c00000000000de44] fast_exception_return+0xf4/0x1b0 LR [c000000000034728] handle_rt_signal64+0x78/0xc50 Call Trace: [c000000f65a17c80] [c000000000034710] handle_rt_signal64+0x60/0xc50 (unreliable) [c000000f65a17d30] [c000000000023640] do_notify_resume+0x330/0x460 [c000000f65a17e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74 Instruction dump: 7c4ff120 e8410170 7c5a03a6 38400000 f8410060 e8010070 e8410080 e8610088 60000000 60000000 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed0989 ---[ end trace 93094aa44b442f87 ]--- The simplified sequence of events that triggers the above exception is: ... # userspace in NON-TRANSACTIONAL state tbegin # userspace in TRANSACTIONAL state signal delivery # kernelspace in SUSPENDED state handle_rt_signal64() get_tm_stackpointer() treclaim # kernelspace in NON-TRANSACTIONAL state __put_user() page fault happens. We will never get back here because of the TM Bad Thing exception. page fault handling kicks in and we voluntarily preempt ourselves do_page_fault() __schedule() __switch_to(other_task) our task is rescheduled and we recheckpoint because the thread's MSR[TS] was not cleared __switch_to(our_task) switch_to_tm() tm_recheckpoint_new_task() trechkpt # kernelspace in SUSPENDED state The page fault handling resumes, but now we are in suspended transaction state do_page_fault() completes rfid <----- trying to get back where the page fault happened (we were non-transactional back then) TM Bad Thing # illegal transition from suspended to non-transactional This patch fixes that issue by clearing the current thread's MSR[TS] just after treclaim in get_tm_stackpointer() so that we stay in non-transactional state in case we are preempted. In order to make treclaim and clearing the thread's MSR[TS] atomic from a preemption perspective when CONFIG_PREEMPT is set, preempt_disable/enable() is used. It's also necessary to save the previous value of the thread's MSR before get_tm_stackpointer() is called so that it can be exposed to the signal handler later in setup_tm_sigcontexts() to inform the userspace MSR at the moment of the signal delivery. Found with tm-signal-context-force-tm kernel selftest. Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200211033831.11165-1-gustavold@linux.ibm.com 18 February 2020, 10:30:42 UTC
44eeb08 Takashi Iwai 18 February 2020, 09:14:09 UTC ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs Some code in HD-audio driver calls snprintf() in a loop and still expects that the return value were actually written size, while snprintf() returns the expected would-be length instead. When the given buffer limit were small, this leads to a buffer overflow. Use scnprintf() for addressing those issues. It returns the actually written size unlike snprintf(). Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 February 2020, 09:15:41 UTC
cc5049a Takashi Iwai 18 February 2020, 08:09:15 UTC ALSA: hda/realtek - Apply quirk for yet another MSI laptop MSI GP65 laptop with SSID 1462:1293 requires the same quirk as other MSI models. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200218080915.3433-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 February 2020, 08:11:12 UTC
15de9cb Chris Wilson 11 February 2020, 12:01:31 UTC drm/i915/gt: Avoid resetting ring->head outside of its timeline mutex We manipulate ring->head while active in i915_request_retire underneath the timeline manipulation. We cannot rely on a stable ring->head outside of the timeline->mutex, in particular while setting up the context for resume and reset. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1126 Fixes: 0881954965e3 ("drm/i915: Introduce intel_context.pin_mutex for pin management") Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex") References: f3c0efc9fe7a ("drm/i915/execlists: Leave resetting ring to intel_ring") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211120131.958949-1-chris@chris-wilson.co.uk (cherry picked from commit 42827350f75c56d0fe9f15d8425a1390528958b6) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 18 February 2020, 07:53:18 UTC
b1339ec Chris Wilson 07 February 2020, 21:14:52 UTC drm/i915/execlists: Always force a context reload when rewinding RING_TAIL If we rewind the RING_TAIL on a context, due to a preemption event, we must force the context restore for the RING_TAIL update to be properly handled. Rather than note which preemption events may cause us to rewind the tail, compare the new request's tail with the previously submitted RING_TAIL, as it turns out that timeslicing was causing unexpected rewinds. <idle>-0 0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3 <idle>-0 0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964 <idle>-0 0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695 <idle>-0 0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695 ^---- Note we unwind 2 requests from the same context <idle>-0 0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695 <idle>-0 0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506 ^---- But to apply the new timeslice, we have to replay the first request before the new client can start -- the unexpected RING_TAIL rewind <idle>-0 0d.s2 1280851219us : trace_ports: 0000:00:02.0 rcs0: submit { 130:4696*, 134:1508 } synmark2-5425 2..s. 1280851239us : process_csb: 0000:00:02.0 rcs0: cs-irq head=5, tail=0 synmark2-5425 2..s. 1280851240us : process_csb: 0000:00:02.0 rcs0: csb[0]: status=0x00008002:0x00000000 ^---- Preemption event for the ELSP update; note the lite-restore synmark2-5425 2..s. 1280851243us : trace_ports: 0000:00:02.0 rcs0: preempted { 130:4698, 66:119966 } synmark2-5425 2..s. 1280851246us : trace_ports: 0000:00:02.0 rcs0: promote { 130:4696*, 134:1508 } synmark2-5425 2.... 1280851462us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4700, current 4695 synmark2-5425 2.... 1280852111us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4702, current 4695 synmark2-5425 2.Ns1 1280852296us : process_csb: 0000:00:02.0 rcs0: cs-irq head=0, tail=2 synmark2-5425 2.Ns1 1280852297us : process_csb: 0000:00:02.0 rcs0: csb[1]: status=0x00000814:0x00000000 synmark2-5425 2.Ns1 1280852299us : trace_ports: 0000:00:02.0 rcs0: completed { 130:4696!, 134:1508 } synmark2-5425 2.Ns1 1280852301us : process_csb: 0000:00:02.0 rcs0: csb[2]: status=0x00000818:0x00000040 synmark2-5425 2.Ns1 1280852302us : trace_ports: 0000:00:02.0 rcs0: completed { 134:1508, 0:0 } synmark2-5425 2.Ns1 1280852313us : process_csb: process_csb:2336 GEM_BUG_ON(!i915_request_completed(*execlists->active) && !reset_in_progress(execlists)) Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing") Referenecs: 82c69bf58650 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Link: https://patchwork.freedesktop.org/patch/msgid/20200207211452.2860634-1-chris@chris-wilson.co.uk (cherry picked from commit 5ba32c7be81e53ea8a27190b0f6be98e6c6779af) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 18 February 2020, 07:53:09 UTC
aa31461 Chris Wilson 02 February 2020, 15:39:34 UTC drm/i915: Wean off drm_pci_alloc/drm_pci_free drm_pci_alloc and drm_pci_free are just very thin wrappers around dma_alloc_coherent, with a note that we should be removing them. Furthermore since commit de09d31dd38a50fdce106c15abd68432eebbd014 Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Fri Jan 15 16:51:42 2016 -0800 page-flags: define PG_reserved behavior on compound pages As far as I can see there's no users of PG_reserved on compound pages. Let's use PF_NO_COMPOUND here. drm_pci_alloc has been declared broken since it mixes GFP_COMP and SetPageReserved. Avoid this conflict by weaning ourselves off using the abstraction and using the dma functions directly. Reported-by: Taketo Kabe Closes: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200202153934.3899472-1-chris@chris-wilson.co.uk (cherry picked from commit c6790dc22312f592c1434577258b31c48c72d52a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 18 February 2020, 07:52:54 UTC
9b64208 Hangbin Liu 17 February 2020, 03:43:15 UTC selftests: forwarding: vxlan_bridge_1d: use more proper tos value 0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by: Petr Machata <petrm@mellanox.com> Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 06:41:10 UTC
82969e6 Alexandre Belloni 14 February 2020, 14:32:24 UTC net: cnic: fix spelling mistake "reserverd" -> "reserved" The reserved member should be named reserved3. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 05:59:16 UTC
245709e Xin Long 18 February 2020, 04:07:53 UTC sctp: move the format error check out of __sctp_sf_do_9_1_abort When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 February 2020, 05:56:03 UTC
back to top