swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 28a33cbc24e4256c143dce96c7d93bf423229f92 authored by Linus Torvalds on 21 July 2012, 20:58:29 UTC
Linux 3.5
Linux 3.5
Tip revision: 28a33cb
stan.S
|
| stan.sa 3.3 7/29/91
|
| The entry point stan computes the tangent of
| an input argument;
| stand does the same except for denormalized input.
|
| Input: Double-extended number X in location pointed to
| by address register a0.
|
| Output: The value tan(X) returned in floating-point register Fp0.
|
| Accuracy and Monotonicity: The returned result is within 3 ulp in
| 64 significant bit, i.e. within 0.5001 ulp to 53 bits if the
| result is subsequently rounded to double precision. The
| result is provably monotonic in double precision.
|
| Speed: The program sTAN takes approximately 170 cycles for
| input argument X such that |X| < 15Pi, which is the usual
| situation.
|
| Algorithm:
|
| 1. If |X| >= 15Pi or |X| < 2**(-40), go to 6.
|
| 2. Decompose X as X = N(Pi/2) + r where |r| <= Pi/4. Let
| k = N mod 2, so in particular, k = 0 or 1.
|
| 3. If k is odd, go to 5.
|
| 4. (k is even) Tan(X) = tan(r) and tan(r) is approximated by a
| rational function U/V where
| U = r + r*s*(P1 + s*(P2 + s*P3)), and
| V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))), s = r*r.
| Exit.
|
| 4. (k is odd) Tan(X) = -cot(r). Since tan(r) is approximated by a
| rational function U/V where
| U = r + r*s*(P1 + s*(P2 + s*P3)), and
| V = 1 + s*(Q1 + s*(Q2 + s*(Q3 + s*Q4))), s = r*r,
| -Cot(r) = -V/U. Exit.
|
| 6. If |X| > 1, go to 8.
|
| 7. (|X|<2**(-40)) Tan(X) = X. Exit.
|
| 8. Overwrite X by X := X rem 2Pi. Now that |X| <= Pi, go back to 2.
|
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
| For details on the license for this file, please see the
| file, README, in this same directory.
|STAN idnt 2,1 | Motorola 040 Floating Point Software Package
|section 8
#include "fpsp.h"
BOUNDS1: .long 0x3FD78000,0x4004BC7E
TWOBYPI: .long 0x3FE45F30,0x6DC9C883
TANQ4: .long 0x3EA0B759,0xF50F8688
TANP3: .long 0xBEF2BAA5,0xA8924F04
TANQ3: .long 0xBF346F59,0xB39BA65F,0x00000000,0x00000000
TANP2: .long 0x3FF60000,0xE073D3FC,0x199C4A00,0x00000000
TANQ2: .long 0x3FF90000,0xD23CD684,0x15D95FA1,0x00000000
TANP1: .long 0xBFFC0000,0x8895A6C5,0xFB423BCA,0x00000000
TANQ1: .long 0xBFFD0000,0xEEF57E0D,0xA84BC8CE,0x00000000
INVTWOPI: .long 0x3FFC0000,0xA2F9836E,0x4E44152A,0x00000000
TWOPI1: .long 0x40010000,0xC90FDAA2,0x00000000,0x00000000
TWOPI2: .long 0x3FDF0000,0x85A308D4,0x00000000,0x00000000
|--N*PI/2, -32 <= N <= 32, IN A LEADING TERM IN EXT. AND TRAILING
|--TERM IN SGL. NOTE THAT PI IS 64-BIT LONG, THUS N*PI/2 IS AT
|--MOST 69 BITS LONG.
.global PITBL
PITBL:
.long 0xC0040000,0xC90FDAA2,0x2168C235,0x21800000
.long 0xC0040000,0xC2C75BCD,0x105D7C23,0xA0D00000
.long 0xC0040000,0xBC7EDCF7,0xFF523611,0xA1E80000
.long 0xC0040000,0xB6365E22,0xEE46F000,0x21480000
.long 0xC0040000,0xAFEDDF4D,0xDD3BA9EE,0xA1200000
.long 0xC0040000,0xA9A56078,0xCC3063DD,0x21FC0000
.long 0xC0040000,0xA35CE1A3,0xBB251DCB,0x21100000
.long 0xC0040000,0x9D1462CE,0xAA19D7B9,0xA1580000
.long 0xC0040000,0x96CBE3F9,0x990E91A8,0x21E00000
.long 0xC0040000,0x90836524,0x88034B96,0x20B00000
.long 0xC0040000,0x8A3AE64F,0x76F80584,0xA1880000
.long 0xC0040000,0x83F2677A,0x65ECBF73,0x21C40000
.long 0xC0030000,0xFB53D14A,0xA9C2F2C2,0x20000000
.long 0xC0030000,0xEEC2D3A0,0x87AC669F,0x21380000
.long 0xC0030000,0xE231D5F6,0x6595DA7B,0xA1300000
.long 0xC0030000,0xD5A0D84C,0x437F4E58,0x9FC00000
.long 0xC0030000,0xC90FDAA2,0x2168C235,0x21000000
.long 0xC0030000,0xBC7EDCF7,0xFF523611,0xA1680000
.long 0xC0030000,0xAFEDDF4D,0xDD3BA9EE,0xA0A00000
.long 0xC0030000,0xA35CE1A3,0xBB251DCB,0x20900000
.long 0xC0030000,0x96CBE3F9,0x990E91A8,0x21600000
.long 0xC0030000,0x8A3AE64F,0x76F80584,0xA1080000
.long 0xC0020000,0xFB53D14A,0xA9C2F2C2,0x1F800000
.long 0xC0020000,0xE231D5F6,0x6595DA7B,0xA0B00000
.long 0xC0020000,0xC90FDAA2,0x2168C235,0x20800000
.long 0xC0020000,0xAFEDDF4D,0xDD3BA9EE,0xA0200000
.long 0xC0020000,0x96CBE3F9,0x990E91A8,0x20E00000
.long 0xC0010000,0xFB53D14A,0xA9C2F2C2,0x1F000000
.long 0xC0010000,0xC90FDAA2,0x2168C235,0x20000000
.long 0xC0010000,0x96CBE3F9,0x990E91A8,0x20600000
.long 0xC0000000,0xC90FDAA2,0x2168C235,0x1F800000
.long 0xBFFF0000,0xC90FDAA2,0x2168C235,0x1F000000
.long 0x00000000,0x00000000,0x00000000,0x00000000
.long 0x3FFF0000,0xC90FDAA2,0x2168C235,0x9F000000
.long 0x40000000,0xC90FDAA2,0x2168C235,0x9F800000
.long 0x40010000,0x96CBE3F9,0x990E91A8,0xA0600000
.long 0x40010000,0xC90FDAA2,0x2168C235,0xA0000000
.long 0x40010000,0xFB53D14A,0xA9C2F2C2,0x9F000000
.long 0x40020000,0x96CBE3F9,0x990E91A8,0xA0E00000
.long 0x40020000,0xAFEDDF4D,0xDD3BA9EE,0x20200000
.long 0x40020000,0xC90FDAA2,0x2168C235,0xA0800000
.long 0x40020000,0xE231D5F6,0x6595DA7B,0x20B00000
.long 0x40020000,0xFB53D14A,0xA9C2F2C2,0x9F800000
.long 0x40030000,0x8A3AE64F,0x76F80584,0x21080000
.long 0x40030000,0x96CBE3F9,0x990E91A8,0xA1600000
.long 0x40030000,0xA35CE1A3,0xBB251DCB,0xA0900000
.long 0x40030000,0xAFEDDF4D,0xDD3BA9EE,0x20A00000
.long 0x40030000,0xBC7EDCF7,0xFF523611,0x21680000
.long 0x40030000,0xC90FDAA2,0x2168C235,0xA1000000
.long 0x40030000,0xD5A0D84C,0x437F4E58,0x1FC00000
.long 0x40030000,0xE231D5F6,0x6595DA7B,0x21300000
.long 0x40030000,0xEEC2D3A0,0x87AC669F,0xA1380000
.long 0x40030000,0xFB53D14A,0xA9C2F2C2,0xA0000000
.long 0x40040000,0x83F2677A,0x65ECBF73,0xA1C40000
.long 0x40040000,0x8A3AE64F,0x76F80584,0x21880000
.long 0x40040000,0x90836524,0x88034B96,0xA0B00000
.long 0x40040000,0x96CBE3F9,0x990E91A8,0xA1E00000
.long 0x40040000,0x9D1462CE,0xAA19D7B9,0x21580000
.long 0x40040000,0xA35CE1A3,0xBB251DCB,0xA1100000
.long 0x40040000,0xA9A56078,0xCC3063DD,0xA1FC0000
.long 0x40040000,0xAFEDDF4D,0xDD3BA9EE,0x21200000
.long 0x40040000,0xB6365E22,0xEE46F000,0xA1480000
.long 0x40040000,0xBC7EDCF7,0xFF523611,0x21E80000
.long 0x40040000,0xC2C75BCD,0x105D7C23,0x20D00000
.long 0x40040000,0xC90FDAA2,0x2168C235,0xA1800000
.set INARG,FP_SCR4
.set TWOTO63,L_SCR1
.set ENDFLAG,L_SCR2
.set N,L_SCR3
| xref t_frcinx
|xref t_extdnrm
.global stand
stand:
|--TAN(X) = X FOR DENORMALIZED X
bra t_extdnrm
.global stan
stan:
fmovex (%a0),%fp0 | ...LOAD INPUT
movel (%a0),%d0
movew 4(%a0),%d0
andil #0x7FFFFFFF,%d0
cmpil #0x3FD78000,%d0 | ...|X| >= 2**(-40)?
bges TANOK1
bra TANSM
TANOK1:
cmpil #0x4004BC7E,%d0 | ...|X| < 15 PI?
blts TANMAIN
bra REDUCEX
TANMAIN:
|--THIS IS THE USUAL CASE, |X| <= 15 PI.
|--THE ARGUMENT REDUCTION IS DONE BY TABLE LOOK UP.
fmovex %fp0,%fp1
fmuld TWOBYPI,%fp1 | ...X*2/PI
|--HIDE THE NEXT TWO INSTRUCTIONS
leal PITBL+0x200,%a1 | ...TABLE OF N*PI/2, N = -32,...,32
|--FP1 IS NOW READY
fmovel %fp1,%d0 | ...CONVERT TO INTEGER
asll #4,%d0
addal %d0,%a1 | ...ADDRESS N*PIBY2 IN Y1, Y2
fsubx (%a1)+,%fp0 | ...X-Y1
|--HIDE THE NEXT ONE
fsubs (%a1),%fp0 | ...FP0 IS R = (X-Y1)-Y2
rorl #5,%d0
andil #0x80000000,%d0 | ...D0 WAS ODD IFF D0 < 0
TANCONT:
cmpil #0,%d0
blt NODD
fmovex %fp0,%fp1
fmulx %fp1,%fp1 | ...S = R*R
fmoved TANQ4,%fp3
fmoved TANP3,%fp2
fmulx %fp1,%fp3 | ...SQ4
fmulx %fp1,%fp2 | ...SP3
faddd TANQ3,%fp3 | ...Q3+SQ4
faddx TANP2,%fp2 | ...P2+SP3
fmulx %fp1,%fp3 | ...S(Q3+SQ4)
fmulx %fp1,%fp2 | ...S(P2+SP3)
faddx TANQ2,%fp3 | ...Q2+S(Q3+SQ4)
faddx TANP1,%fp2 | ...P1+S(P2+SP3)
fmulx %fp1,%fp3 | ...S(Q2+S(Q3+SQ4))
fmulx %fp1,%fp2 | ...S(P1+S(P2+SP3))
faddx TANQ1,%fp3 | ...Q1+S(Q2+S(Q3+SQ4))
fmulx %fp0,%fp2 | ...RS(P1+S(P2+SP3))
fmulx %fp3,%fp1 | ...S(Q1+S(Q2+S(Q3+SQ4)))
faddx %fp2,%fp0 | ...R+RS(P1+S(P2+SP3))
fadds #0x3F800000,%fp1 | ...1+S(Q1+...)
fmovel %d1,%fpcr |restore users exceptions
fdivx %fp1,%fp0 |last inst - possible exception set
bra t_frcinx
NODD:
fmovex %fp0,%fp1
fmulx %fp0,%fp0 | ...S = R*R
fmoved TANQ4,%fp3
fmoved TANP3,%fp2
fmulx %fp0,%fp3 | ...SQ4
fmulx %fp0,%fp2 | ...SP3
faddd TANQ3,%fp3 | ...Q3+SQ4
faddx TANP2,%fp2 | ...P2+SP3
fmulx %fp0,%fp3 | ...S(Q3+SQ4)
fmulx %fp0,%fp2 | ...S(P2+SP3)
faddx TANQ2,%fp3 | ...Q2+S(Q3+SQ4)
faddx TANP1,%fp2 | ...P1+S(P2+SP3)
fmulx %fp0,%fp3 | ...S(Q2+S(Q3+SQ4))
fmulx %fp0,%fp2 | ...S(P1+S(P2+SP3))
faddx TANQ1,%fp3 | ...Q1+S(Q2+S(Q3+SQ4))
fmulx %fp1,%fp2 | ...RS(P1+S(P2+SP3))
fmulx %fp3,%fp0 | ...S(Q1+S(Q2+S(Q3+SQ4)))
faddx %fp2,%fp1 | ...R+RS(P1+S(P2+SP3))
fadds #0x3F800000,%fp0 | ...1+S(Q1+...)
fmovex %fp1,-(%sp)
eoril #0x80000000,(%sp)
fmovel %d1,%fpcr |restore users exceptions
fdivx (%sp)+,%fp0 |last inst - possible exception set
bra t_frcinx
TANBORS:
|--IF |X| > 15PI, WE USE THE GENERAL ARGUMENT REDUCTION.
|--IF |X| < 2**(-40), RETURN X OR 1.
cmpil #0x3FFF8000,%d0
bgts REDUCEX
TANSM:
fmovex %fp0,-(%sp)
fmovel %d1,%fpcr |restore users exceptions
fmovex (%sp)+,%fp0 |last inst - possible exception set
bra t_frcinx
REDUCEX:
|--WHEN REDUCEX IS USED, THE CODE WILL INEVITABLY BE SLOW.
|--THIS REDUCTION METHOD, HOWEVER, IS MUCH FASTER THAN USING
|--THE REMAINDER INSTRUCTION WHICH IS NOW IN SOFTWARE.
fmovemx %fp2-%fp5,-(%a7) | ...save FP2 through FP5
movel %d2,-(%a7)
fmoves #0x00000000,%fp1
|--If compact form of abs(arg) in d0=$7ffeffff, argument is so large that
|--there is a danger of unwanted overflow in first LOOP iteration. In this
|--case, reduce argument by one remainder step to make subsequent reduction
|--safe.
cmpil #0x7ffeffff,%d0 |is argument dangerously large?
bnes LOOP
movel #0x7ffe0000,FP_SCR2(%a6) |yes
| ;create 2**16383*PI/2
movel #0xc90fdaa2,FP_SCR2+4(%a6)
clrl FP_SCR2+8(%a6)
ftstx %fp0 |test sign of argument
movel #0x7fdc0000,FP_SCR3(%a6) |create low half of 2**16383*
| ;PI/2 at FP_SCR3
movel #0x85a308d3,FP_SCR3+4(%a6)
clrl FP_SCR3+8(%a6)
fblt red_neg
orw #0x8000,FP_SCR2(%a6) |positive arg
orw #0x8000,FP_SCR3(%a6)
red_neg:
faddx FP_SCR2(%a6),%fp0 |high part of reduction is exact
fmovex %fp0,%fp1 |save high result in fp1
faddx FP_SCR3(%a6),%fp0 |low part of reduction
fsubx %fp0,%fp1 |determine low component of result
faddx FP_SCR3(%a6),%fp1 |fp0/fp1 are reduced argument.
|--ON ENTRY, FP0 IS X, ON RETURN, FP0 IS X REM PI/2, |X| <= PI/4.
|--integer quotient will be stored in N
|--Intermediate remainder is 66-bit long; (R,r) in (FP0,FP1)
LOOP:
fmovex %fp0,INARG(%a6) | ...+-2**K * F, 1 <= F < 2
movew INARG(%a6),%d0
movel %d0,%a1 | ...save a copy of D0
andil #0x00007FFF,%d0
subil #0x00003FFF,%d0 | ...D0 IS K
cmpil #28,%d0
bles LASTLOOP
CONTLOOP:
subil #27,%d0 | ...D0 IS L := K-27
movel #0,ENDFLAG(%a6)
bras WORK
LASTLOOP:
clrl %d0 | ...D0 IS L := 0
movel #1,ENDFLAG(%a6)
WORK:
|--FIND THE REMAINDER OF (R,r) W.R.T. 2**L * (PI/2). L IS SO CHOSEN
|--THAT INT( X * (2/PI) / 2**(L) ) < 2**29.
|--CREATE 2**(-L) * (2/PI), SIGN(INARG)*2**(63),
|--2**L * (PIby2_1), 2**L * (PIby2_2)
movel #0x00003FFE,%d2 | ...BIASED EXPO OF 2/PI
subl %d0,%d2 | ...BIASED EXPO OF 2**(-L)*(2/PI)
movel #0xA2F9836E,FP_SCR1+4(%a6)
movel #0x4E44152A,FP_SCR1+8(%a6)
movew %d2,FP_SCR1(%a6) | ...FP_SCR1 is 2**(-L)*(2/PI)
fmovex %fp0,%fp2
fmulx FP_SCR1(%a6),%fp2
|--WE MUST NOW FIND INT(FP2). SINCE WE NEED THIS VALUE IN
|--FLOATING POINT FORMAT, THE TWO FMOVE'S FMOVE.L FP <--> N
|--WILL BE TOO INEFFICIENT. THE WAY AROUND IT IS THAT
|--(SIGN(INARG)*2**63 + FP2) - SIGN(INARG)*2**63 WILL GIVE
|--US THE DESIRED VALUE IN FLOATING POINT.
|--HIDE SIX CYCLES OF INSTRUCTION
movel %a1,%d2
swap %d2
andil #0x80000000,%d2
oril #0x5F000000,%d2 | ...D2 IS SIGN(INARG)*2**63 IN SGL
movel %d2,TWOTO63(%a6)
movel %d0,%d2
addil #0x00003FFF,%d2 | ...BIASED EXPO OF 2**L * (PI/2)
|--FP2 IS READY
fadds TWOTO63(%a6),%fp2 | ...THE FRACTIONAL PART OF FP1 IS ROUNDED
|--HIDE 4 CYCLES OF INSTRUCTION; creating 2**(L)*Piby2_1 and 2**(L)*Piby2_2
movew %d2,FP_SCR2(%a6)
clrw FP_SCR2+2(%a6)
movel #0xC90FDAA2,FP_SCR2+4(%a6)
clrl FP_SCR2+8(%a6) | ...FP_SCR2 is 2**(L) * Piby2_1
|--FP2 IS READY
fsubs TWOTO63(%a6),%fp2 | ...FP2 is N
addil #0x00003FDD,%d0
movew %d0,FP_SCR3(%a6)
clrw FP_SCR3+2(%a6)
movel #0x85A308D3,FP_SCR3+4(%a6)
clrl FP_SCR3+8(%a6) | ...FP_SCR3 is 2**(L) * Piby2_2
movel ENDFLAG(%a6),%d0
|--We are now ready to perform (R+r) - N*P1 - N*P2, P1 = 2**(L) * Piby2_1 and
|--P2 = 2**(L) * Piby2_2
fmovex %fp2,%fp4
fmulx FP_SCR2(%a6),%fp4 | ...W = N*P1
fmovex %fp2,%fp5
fmulx FP_SCR3(%a6),%fp5 | ...w = N*P2
fmovex %fp4,%fp3
|--we want P+p = W+w but |p| <= half ulp of P
|--Then, we need to compute A := R-P and a := r-p
faddx %fp5,%fp3 | ...FP3 is P
fsubx %fp3,%fp4 | ...W-P
fsubx %fp3,%fp0 | ...FP0 is A := R - P
faddx %fp5,%fp4 | ...FP4 is p = (W-P)+w
fmovex %fp0,%fp3 | ...FP3 A
fsubx %fp4,%fp1 | ...FP1 is a := r - p
|--Now we need to normalize (A,a) to "new (R,r)" where R+r = A+a but
|--|r| <= half ulp of R.
faddx %fp1,%fp0 | ...FP0 is R := A+a
|--No need to calculate r if this is the last loop
cmpil #0,%d0
bgt RESTORE
|--Need to calculate r
fsubx %fp0,%fp3 | ...A-R
faddx %fp3,%fp1 | ...FP1 is r := (A-R)+a
bra LOOP
RESTORE:
fmovel %fp2,N(%a6)
movel (%a7)+,%d2
fmovemx (%a7)+,%fp2-%fp5
movel N(%a6),%d0
rorl #1,%d0
bra TANCONT
|end