swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 9f4ad9e425a1d3b6a34617b8ea226d56a119a717 authored by Linus Torvalds on 25 April 2021, 20:49:08 UTC
Linux 5.12
Linux 5.12
Tip revision: 9f4ad9e
Kconfig
# SPDX-License-Identifier: GPL-2.0
config CRYPTO_DEV_FSL_CAAM_COMMON
tristate
config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
tristate
config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
tristate
config CRYPTO_DEV_FSL_CAAM
tristate "Freescale CAAM-Multicore platform driver backend"
depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE
select SOC_BUS
select CRYPTO_DEV_FSL_CAAM_COMMON
imply FSL_MC_BUS
help
Enables the driver module for Freescale's Cryptographic Accelerator
and Assurance Module (CAAM), also known as the SEC version 4 (SEC4).
This module creates job ring devices, and configures h/w
to operate as a DPAA component automatically, depending
on h/w feature availability.
To compile this driver as a module, choose M here: the module
will be called caam.
if CRYPTO_DEV_FSL_CAAM
config CRYPTO_DEV_FSL_CAAM_DEBUG
bool "Enable debug output in CAAM driver"
help
Selecting this will enable printing of various debug
information in the CAAM driver.
menuconfig CRYPTO_DEV_FSL_CAAM_JR
tristate "Freescale CAAM Job Ring driver backend"
select CRYPTO_ENGINE
default y
help
Enables the driver module for Job Rings which are part of
Freescale's Cryptographic Accelerator
and Assurance Module (CAAM). This module adds a job ring operation
interface.
To compile this driver as a module, choose M here: the module
will be called caam_jr.
if CRYPTO_DEV_FSL_CAAM_JR
config CRYPTO_DEV_FSL_CAAM_RINGSIZE
int "Job Ring size"
range 2 9
default "9"
help
Select size of Job Rings as a power of 2, within the
range 2-9 (ring size 4-512).
Examples:
2 => 4
3 => 8
4 => 16
5 => 32
6 => 64
7 => 128
8 => 256
9 => 512
config CRYPTO_DEV_FSL_CAAM_INTC
bool "Job Ring interrupt coalescing"
help
Enable the Job Ring's interrupt coalescing feature.
Note: the driver already provides adequate
interrupt coalescing in software.
config CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD
int "Job Ring interrupt coalescing count threshold"
depends on CRYPTO_DEV_FSL_CAAM_INTC
range 1 255
default 255
help
Select number of descriptor completions to queue before
raising an interrupt, in the range 1-255. Note that a selection
of 1 functionally defeats the coalescing feature, and a selection
equal or greater than the job ring size will force timeouts.
config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
int "Job Ring interrupt coalescing timer threshold"
depends on CRYPTO_DEV_FSL_CAAM_INTC
range 1 65535
default 2048
help
Select number of bus clocks/64 to timeout in the case that one or
more descriptor completions are queued without reaching the count
threshold. Range is 1-65535.
config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
bool "Register algorithm implementations with the Crypto API"
default y
select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
select CRYPTO_AEAD
select CRYPTO_AUTHENC
select CRYPTO_SKCIPHER
select CRYPTO_LIB_DES
select CRYPTO_XTS
help
Selecting this will offload crypto for users of the
scatterlist crypto API (such as the linux native IPSec
stack) to the SEC4 via job ring.
config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
bool "Queue Interface as Crypto API backend"
depends on FSL_DPAA && NET
default y
select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
select CRYPTO_AUTHENC
select CRYPTO_SKCIPHER
select CRYPTO_DES
select CRYPTO_XTS
help
Selecting this will use CAAM Queue Interface (QI) for sending
& receiving crypto jobs to/from CAAM. This gives better performance
than job ring interface when the number of cores are more than the
number of job rings assigned to the kernel. The number of portals
assigned to the kernel should also be more than the number of
job rings.
config CRYPTO_DEV_FSL_CAAM_AHASH_API
bool "Register hash algorithm implementations with Crypto API"
default y
select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
select CRYPTO_HASH
help
Selecting this will offload ahash for users of the
scatterlist crypto API to the SEC4 via job ring.
config CRYPTO_DEV_FSL_CAAM_PKC_API
bool "Register public key cryptography implementations with Crypto API"
default y
select CRYPTO_RSA
help
Selecting this will allow SEC Public key support for RSA.
Supported cryptographic primitives: encryption, decryption,
signature and verification.
config CRYPTO_DEV_FSL_CAAM_RNG_API
bool "Register caam device for hwrng API"
default y
select CRYPTO_RNG
select HW_RANDOM
help
Selecting this will register the SEC4 hardware rng to
the hw_random API for supplying the kernel entropy pool.
endif # CRYPTO_DEV_FSL_CAAM_JR
endif # CRYPTO_DEV_FSL_CAAM
config CRYPTO_DEV_FSL_DPAA2_CAAM
tristate "QorIQ DPAA2 CAAM (DPSECI) driver"
depends on FSL_MC_DPIO
depends on NETDEVICES
select CRYPTO_DEV_FSL_CAAM_COMMON
select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
select CRYPTO_SKCIPHER
select CRYPTO_AUTHENC
select CRYPTO_AEAD
select CRYPTO_HASH
select CRYPTO_DES
select CRYPTO_XTS
help
CAAM driver for QorIQ Data Path Acceleration Architecture 2.
It handles DPSECI DPAA2 objects that sit on the Management Complex
(MC) fsl-mc bus.
To compile this as a module, choose M here: the module
will be called dpaa2_caam.