swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 7111951b8d4973bda27ff663f2cf18b663d15b48 authored by Linus Torvalds on 29 March 2020, 22:25:41 UTC
Linux 5.6
Linux 5.6
Tip revision: 7111951
k8temp.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* k8temp.c - Linux kernel module for hardware monitoring
*
* Copyright (C) 2006 Rudolf Marek <r.marek@assembler.cz>
*
* Inspired from the w83785 and amd756 drivers.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/processor.h>
#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
#define REG_TEMP 0xe4
#define SEL_PLACE 0x40
#define SEL_CORE 0x04
struct k8temp_data {
struct mutex update_lock;
/* registers values */
u8 sensorsp; /* sensor presence bits - SEL_CORE, SEL_PLACE */
u8 swap_core_select; /* meaning of SEL_CORE is inverted */
u32 temp_offset;
};
static const struct pci_device_id k8temp_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
{ 0 },
};
MODULE_DEVICE_TABLE(pci, k8temp_ids);
static int is_rev_g_desktop(u8 model)
{
u32 brandidx;
if (model < 0x69)
return 0;
if (model == 0xc1 || model == 0x6c || model == 0x7c)
return 0;
/*
* Differentiate between AM2 and ASB1.
* See "Constructing the processor Name String" in "Revision
* Guide for AMD NPT Family 0Fh Processors" (33610).
*/
brandidx = cpuid_ebx(0x80000001);
brandidx = (brandidx >> 9) & 0x1f;
/* Single core */
if ((model == 0x6f || model == 0x7f) &&
(brandidx == 0x7 || brandidx == 0x9 || brandidx == 0xc))
return 0;
/* Dual core */
if (model == 0x6b &&
(brandidx == 0xb || brandidx == 0xc))
return 0;
return 1;
}
static umode_t
k8temp_is_visible(const void *drvdata, enum hwmon_sensor_types type,
u32 attr, int channel)
{
const struct k8temp_data *data = drvdata;
if ((channel & 1) && !(data->sensorsp & SEL_PLACE))
return 0;
if ((channel & 2) && !(data->sensorsp & SEL_CORE))
return 0;
return 0444;
}
static int
k8temp_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct k8temp_data *data = dev_get_drvdata(dev);
struct pci_dev *pdev = to_pci_dev(dev->parent);
int core, place;
u32 temp;
u8 tmp;
core = (channel >> 1) & 1;
place = channel & 1;
core ^= data->swap_core_select;
mutex_lock(&data->update_lock);
pci_read_config_byte(pdev, REG_TEMP, &tmp);
tmp &= ~(SEL_PLACE | SEL_CORE);
if (core)
tmp |= SEL_CORE;
if (place)
tmp |= SEL_PLACE;
pci_write_config_byte(pdev, REG_TEMP, tmp);
pci_read_config_dword(pdev, REG_TEMP, &temp);
mutex_unlock(&data->update_lock);
*val = TEMP_FROM_REG(temp) + data->temp_offset;
return 0;
}
static const struct hwmon_ops k8temp_ops = {
.is_visible = k8temp_is_visible,
.read = k8temp_read,
};
static const struct hwmon_channel_info *k8temp_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT),
NULL
};
static const struct hwmon_chip_info k8temp_chip_info = {
.ops = &k8temp_ops,
.info = k8temp_info,
};
static int k8temp_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
u8 scfg;
u32 temp;
u8 model, stepping;
struct k8temp_data *data;
struct device *hwmon_dev;
data = devm_kzalloc(&pdev->dev, sizeof(struct k8temp_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
model = boot_cpu_data.x86_model;
stepping = boot_cpu_data.x86_stepping;
/* feature available since SH-C0, exclude older revisions */
if ((model == 4 && stepping == 0) ||
(model == 5 && stepping <= 1))
return -ENODEV;
/*
* AMD NPT family 0fh, i.e. RevF and RevG:
* meaning of SEL_CORE bit is inverted
*/
if (model >= 0x40) {
data->swap_core_select = 1;
dev_warn(&pdev->dev,
"Temperature readouts might be wrong - check erratum #141\n");
}
/*
* RevG desktop CPUs (i.e. no socket S1G1 or ASB1 parts) need
* additional offset, otherwise reported temperature is below
* ambient temperature
*/
if (is_rev_g_desktop(model))
data->temp_offset = 21000;
pci_read_config_byte(pdev, REG_TEMP, &scfg);
scfg &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
pci_write_config_byte(pdev, REG_TEMP, scfg);
pci_read_config_byte(pdev, REG_TEMP, &scfg);
if (scfg & (SEL_PLACE | SEL_CORE)) {
dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n");
return -ENODEV;
}
scfg |= (SEL_PLACE | SEL_CORE);
pci_write_config_byte(pdev, REG_TEMP, scfg);
/* now we know if we can change core and/or sensor */
pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp);
if (data->sensorsp & SEL_PLACE) {
scfg &= ~SEL_CORE; /* Select sensor 1, core0 */
pci_write_config_byte(pdev, REG_TEMP, scfg);
pci_read_config_dword(pdev, REG_TEMP, &temp);
scfg |= SEL_CORE; /* prepare for next selection */
if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is unlikely */
data->sensorsp &= ~SEL_PLACE;
}
if (data->sensorsp & SEL_CORE) {
scfg &= ~SEL_PLACE; /* Select sensor 0, core1 */
pci_write_config_byte(pdev, REG_TEMP, scfg);
pci_read_config_dword(pdev, REG_TEMP, &temp);
if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is unlikely */
data->sensorsp &= ~SEL_CORE;
}
mutex_init(&data->update_lock);
hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
"k8temp",
data,
&k8temp_chip_info,
NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static struct pci_driver k8temp_driver = {
.name = "k8temp",
.id_table = k8temp_ids,
.probe = k8temp_probe,
};
module_pci_driver(k8temp_driver);
MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
MODULE_DESCRIPTION("AMD K8 core temperature monitor");
MODULE_LICENSE("GPL");