swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 95064a75ebf8744e1ff595e8cd7ff9b6c851523e authored by Linus Torvalds on 13 September 2006, 01:41:36 UTC
Linux v2.6.18-rc7
Linux v2.6.18-rc7
Tip revision: 95064a7
i2c-algo-ite.h
/*
--------------------------------------------------------------------
i2c-ite.h: Global defines for the I2C controller on board the
ITE MIPS processor.
--------------------------------------------------------------------
Hai-Pao Fan, MontaVista Software, Inc.
hpfan@mvista.com or source@mvista.com
Copyright 2001 MontaVista Software Inc.
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef I2C_ITE_H
#define I2C_ITE_H 1
#include <asm/it8172/it8172.h>
/* I2C Registers */
#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
/* Host Control Register ITE_I2CHCR */
#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */
#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing
the current transaction */
#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */
#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */
#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */
#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute
the command and send the data programmed in
all required registers to I2C bus */
#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W
#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R
#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S
/* Host Status Register ITE_I2CHSR */
#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except
in the first and last bytes */
#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */
#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */
#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */
#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */
/* Slave Address Register ITE_I2CSAR */
#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */
#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the
next slave address is addressed */
/* Slave Sub-address Register ITE_I2CSSAR */
#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */
/* Clock Counter Register ITE_I2CCKCNT */
#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */
#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */
#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */
/* START Hold Time Register ITE_I2CSHDR */
/* value is counted based on 16 MHz internal clock */
#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */
#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */
/* (Repeated) START Setup Time Register ITE_I2CRSUR */
/* value is counted based on 16 MHz internal clock */
#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */
#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */
/* STOP setup Time Register ITE_I2CPSUR */
/* FIFO Data Register ITE_I2CFDR */
#define ITE_I2CFDR_MASK 0xff
/* FIFO Byte Count Register ITE_I2CFBCR */
#define ITE_I2CFBCR_MASK 0x3f
/* FIFO Control Register ITE_I2CFCR */
#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point
and I2CFSR */
/* FIFO Status Register ITE_I2CFSR */
#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */
#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */
#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */
#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */
#endif /* I2C_ITE_H */