swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: bfe01a5ba2490f299e1d2d5508cbbbadd897bbe9 authored by Linus Torvalds on 05 October 2014, 19:23:04 UTC
Linux 3.17
Linux 3.17
Tip revision: bfe01a5
Kconfig
#
# Industrial I/O subsystem configuration
#
menuconfig IIO
tristate "Industrial I/O support"
select ANON_INODES
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
number of different physical interfaces (i2c, spi, etc).
if IIO
config IIO_BUFFER
bool "Enable buffer support within IIO"
help
Provide core support for various buffer based data
acquisition methods.
if IIO_BUFFER
config IIO_BUFFER_CB
boolean "IIO callback buffer used for push in-kernel interfaces"
help
Should be selected by any drivers that do in-kernel push
usage. That is, those where the data is pushed to the consumer.
config IIO_KFIFO_BUF
select IIO_TRIGGER
tristate "Industrial I/O buffering based on kfifo"
help
A simple fifo based on kfifo. Note that this currently provides
no buffer events so it is up to userspace to work out how
often to read from the buffer.
config IIO_TRIGGERED_BUFFER
tristate
select IIO_TRIGGER
select IIO_KFIFO_BUF
help
Provides helper functions for setting up triggered buffers.
endif # IIO_BUFFER
config IIO_TRIGGER
boolean "Enable triggered sampling support"
help
Provides IIO core support for triggers. Currently these
are used to initialize capture of samples to push into
buffers. The triggers are effectively a 'capture
data now' interrupt.
config IIO_CONSUMERS_PER_TRIGGER
int "Maximum number of consumers per trigger"
depends on IIO_TRIGGER
default "2"
help
This value controls the maximum number of consumers that a
given trigger may handle. Default is 2.
source "drivers/iio/accel/Kconfig"
source "drivers/iio/adc/Kconfig"
source "drivers/iio/amplifiers/Kconfig"
source "drivers/iio/common/Kconfig"
source "drivers/iio/dac/Kconfig"
source "drivers/iio/frequency/Kconfig"
source "drivers/iio/gyro/Kconfig"
source "drivers/iio/humidity/Kconfig"
source "drivers/iio/imu/Kconfig"
source "drivers/iio/light/Kconfig"
source "drivers/iio/magnetometer/Kconfig"
source "drivers/iio/orientation/Kconfig"
if IIO_TRIGGER
source "drivers/iio/trigger/Kconfig"
endif #IIO_TRIGGER
source "drivers/iio/pressure/Kconfig"
source "drivers/iio/proximity/Kconfig"
source "drivers/iio/temperature/Kconfig"
endif # IIO