swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 44549e8f5eea4e0a41b487b63e616cb089922b99 authored by Linus Torvalds on 08 May 2016, 21:38:32 UTC
Linux 4.6-rc7
Linux 4.6-rc7
Tip revision: 44549e8
Kconfig
menuconfig ISDN_DRV_GIGASET
tristate "Siemens Gigaset support"
depends on TTY
select CRC_CCITT
select BITREVERSE
help
This driver supports the Siemens Gigaset SX205/255 family of
ISDN DECT bases, including the predecessors Gigaset 3070/3075
and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
721X.
If you have one of these devices, say M here and for at least
one of the connection specific parts that follow.
This will build a module called "gigaset".
Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
as a module, you have to build this driver as a module too,
otherwise the Gigaset device won't show up as an ISDN device.
if ISDN_DRV_GIGASET
config GIGASET_CAPI
bool "Gigaset CAPI support"
depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
default 'y'
help
Build the Gigaset driver as a CAPI 2.0 driver interfacing with
the Kernel CAPI subsystem. To use it with the old ISDN4Linux
subsystem you'll have to enable the capidrv glue driver.
(select ISDN_CAPI_CAPIDRV.)
Say N to build the old native ISDN4Linux variant.
If unsure, say Y.
config GIGASET_I4L
bool
depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
default !GIGASET_CAPI
config GIGASET_DUMMYLL
bool
default !GIGASET_CAPI&&!GIGASET_I4L
config GIGASET_BASE
tristate "Gigaset base station support"
depends on USB
help
Say M here if you want to use the USB interface of the Gigaset
base for connection to your system.
This will build a module called "bas_gigaset".
config GIGASET_M105
tristate "Gigaset M105 support"
depends on USB
help
Say M here if you want to connect to the Gigaset base via DECT
using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
This will build a module called "usb_gigaset".
config GIGASET_M101
tristate "Gigaset M101 support"
help
Say M here if you want to connect to the Gigaset base via DECT
using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
This will build a module called "ser_gigaset".
config GIGASET_DEBUG
bool "Gigaset debugging"
help
This enables debugging code in the Gigaset drivers.
If in doubt, say yes.
endif # ISDN_DRV_GIGASET