swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 5816b3e6577eaa676ceb00a848f0fd65fe2adc29 authored by Linus Torvalds on 26 September 2021, 21:08:19 UTC
Linux 5.15-rc3
Linux 5.15-rc3
Tip revision: 5816b3e
lm3533-ctrlbank.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* lm3533-ctrlbank.c -- LM3533 Generic Control Bank interface
*
* Copyright (C) 2011-2012 Texas Instruments
*
* Author: Johan Hovold <jhovold@gmail.com>
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/mfd/lm3533.h>
#define LM3533_MAX_CURRENT_MIN 5000
#define LM3533_MAX_CURRENT_MAX 29800
#define LM3533_MAX_CURRENT_STEP 800
#define LM3533_PWM_MAX 0x3f
#define LM3533_REG_PWM_BASE 0x14
#define LM3533_REG_MAX_CURRENT_BASE 0x1f
#define LM3533_REG_CTRLBANK_ENABLE 0x27
#define LM3533_REG_BRIGHTNESS_BASE 0x40
static inline u8 lm3533_ctrlbank_get_reg(struct lm3533_ctrlbank *cb, u8 base)
{
return base + cb->id;
}
int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb)
{
u8 mask;
int ret;
dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
mask = 1 << cb->id;
ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE,
mask, mask);
if (ret)
dev_err(cb->dev, "failed to enable ctrlbank %d\n", cb->id);
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_enable);
int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb)
{
u8 mask;
int ret;
dev_dbg(cb->dev, "%s - %d\n", __func__, cb->id);
mask = 1 << cb->id;
ret = lm3533_update(cb->lm3533, LM3533_REG_CTRLBANK_ENABLE, 0, mask);
if (ret)
dev_err(cb->dev, "failed to disable ctrlbank %d\n", cb->id);
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_disable);
/*
* Full-scale current.
*
* imax 5000 - 29800 uA (800 uA step)
*/
int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax)
{
u8 reg;
u8 val;
int ret;
if (imax < LM3533_MAX_CURRENT_MIN || imax > LM3533_MAX_CURRENT_MAX)
return -EINVAL;
val = (imax - LM3533_MAX_CURRENT_MIN) / LM3533_MAX_CURRENT_STEP;
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_MAX_CURRENT_BASE);
ret = lm3533_write(cb->lm3533, reg, val);
if (ret)
dev_err(cb->dev, "failed to set max current\n");
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_max_current);
int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val)
{
u8 reg;
int ret;
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
ret = lm3533_write(cb->lm3533, reg, val);
if (ret)
dev_err(cb->dev, "failed to set brightness\n");
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_brightness);
int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val)
{
u8 reg;
int ret;
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
ret = lm3533_read(cb->lm3533, reg, val);
if (ret)
dev_err(cb->dev, "failed to get brightness\n");
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_brightness);
/*
* PWM-input control mask:
*
* bit 5 - PWM-input enabled in Zone 4
* bit 4 - PWM-input enabled in Zone 3
* bit 3 - PWM-input enabled in Zone 2
* bit 2 - PWM-input enabled in Zone 1
* bit 1 - PWM-input enabled in Zone 0
* bit 0 - PWM-input enabled
*/
int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val)
{
u8 reg;
int ret;
if (val > LM3533_PWM_MAX)
return -EINVAL;
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
ret = lm3533_write(cb->lm3533, reg, val);
if (ret)
dev_err(cb->dev, "failed to set PWM mask\n");
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_pwm);
int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val)
{
u8 reg;
int ret;
reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
ret = lm3533_read(cb->lm3533, reg, val);
if (ret)
dev_err(cb->dev, "failed to get PWM mask\n");
return ret;
}
EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_pwm);
MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>");
MODULE_DESCRIPTION("LM3533 Control Bank interface");
MODULE_LICENSE("GPL");