swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 17d857be649a21ca90008c6dc425d849fa83db5c authored by Linus Torvalds on 27 September 2009, 21:57:48 UTC
Linux 2.6.32-rc1
Linux 2.6.32-rc1
Tip revision: 17d857b
wm831x-irq.c
/*
* wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/irq.h>
#include <linux/delay.h>
/*
* Since generic IRQs don't currently support interrupt controllers on
* interrupt driven buses we don't use genirq but instead provide an
* interface that looks very much like the standard ones. This leads
* to some bodges, including storing interrupt handler information in
* the static irq_data table we use to look up the data for individual
* interrupts, but hopefully won't last too long.
*/
struct wm831x_irq_data {
int primary;
int reg;
int mask;
irq_handler_t handler;
void *handler_data;
};
static struct wm831x_irq_data wm831x_irqs[] = {
[WM831X_IRQ_TEMP_THW] = {
.primary = WM831X_TEMP_INT,
.reg = 1,
.mask = WM831X_TEMP_THW_EINT,
},
[WM831X_IRQ_GPIO_1] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP1_EINT,
},
[WM831X_IRQ_GPIO_2] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP2_EINT,
},
[WM831X_IRQ_GPIO_3] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP3_EINT,
},
[WM831X_IRQ_GPIO_4] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP4_EINT,
},
[WM831X_IRQ_GPIO_5] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP5_EINT,
},
[WM831X_IRQ_GPIO_6] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP6_EINT,
},
[WM831X_IRQ_GPIO_7] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP7_EINT,
},
[WM831X_IRQ_GPIO_8] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP8_EINT,
},
[WM831X_IRQ_GPIO_9] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP9_EINT,
},
[WM831X_IRQ_GPIO_10] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP10_EINT,
},
[WM831X_IRQ_GPIO_11] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP11_EINT,
},
[WM831X_IRQ_GPIO_12] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP12_EINT,
},
[WM831X_IRQ_GPIO_13] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP13_EINT,
},
[WM831X_IRQ_GPIO_14] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP14_EINT,
},
[WM831X_IRQ_GPIO_15] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP15_EINT,
},
[WM831X_IRQ_GPIO_16] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP16_EINT,
},
[WM831X_IRQ_ON] = {
.primary = WM831X_ON_PIN_INT,
.reg = 1,
.mask = WM831X_ON_PIN_EINT,
},
[WM831X_IRQ_PPM_SYSLO] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_SYSLO_EINT,
},
[WM831X_IRQ_PPM_PWR_SRC] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_PWR_SRC_EINT,
},
[WM831X_IRQ_PPM_USB_CURR] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_USB_CURR_EINT,
},
[WM831X_IRQ_WDOG_TO] = {
.primary = WM831X_WDOG_INT,
.reg = 1,
.mask = WM831X_WDOG_TO_EINT,
},
[WM831X_IRQ_RTC_PER] = {
.primary = WM831X_RTC_INT,
.reg = 1,
.mask = WM831X_RTC_PER_EINT,
},
[WM831X_IRQ_RTC_ALM] = {
.primary = WM831X_RTC_INT,
.reg = 1,
.mask = WM831X_RTC_ALM_EINT,
},
[WM831X_IRQ_CHG_BATT_HOT] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_HOT_EINT,
},
[WM831X_IRQ_CHG_BATT_COLD] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_COLD_EINT,
},
[WM831X_IRQ_CHG_BATT_FAIL] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_FAIL_EINT,
},
[WM831X_IRQ_CHG_OV] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_OV_EINT,
},
[WM831X_IRQ_CHG_END] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_END_EINT,
},
[WM831X_IRQ_CHG_TO] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_TO_EINT,
},
[WM831X_IRQ_CHG_MODE] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_MODE_EINT,
},
[WM831X_IRQ_CHG_START] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_START_EINT,
},
[WM831X_IRQ_TCHDATA] = {
.primary = WM831X_TCHDATA_INT,
.reg = 1,
.mask = WM831X_TCHDATA_EINT,
},
[WM831X_IRQ_TCHPD] = {
.primary = WM831X_TCHPD_INT,
.reg = 1,
.mask = WM831X_TCHPD_EINT,
},
[WM831X_IRQ_AUXADC_DATA] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DATA_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP1] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP1_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP2] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP2_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP3] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP3_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP4] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP4_EINT,
},
[WM831X_IRQ_CS1] = {
.primary = WM831X_CS_INT,
.reg = 2,
.mask = WM831X_CS1_EINT,
},
[WM831X_IRQ_CS2] = {
.primary = WM831X_CS_INT,
.reg = 2,
.mask = WM831X_CS2_EINT,
},
[WM831X_IRQ_HC_DC1] = {
.primary = WM831X_HC_INT,
.reg = 4,
.mask = WM831X_HC_DC1_EINT,
},
[WM831X_IRQ_HC_DC2] = {
.primary = WM831X_HC_INT,
.reg = 4,
.mask = WM831X_HC_DC2_EINT,
},
[WM831X_IRQ_UV_LDO1] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO1_EINT,
},
[WM831X_IRQ_UV_LDO2] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO2_EINT,
},
[WM831X_IRQ_UV_LDO3] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO3_EINT,
},
[WM831X_IRQ_UV_LDO4] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO4_EINT,
},
[WM831X_IRQ_UV_LDO5] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO5_EINT,
},
[WM831X_IRQ_UV_LDO6] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO6_EINT,
},
[WM831X_IRQ_UV_LDO7] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO7_EINT,
},
[WM831X_IRQ_UV_LDO8] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO8_EINT,
},
[WM831X_IRQ_UV_LDO9] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO9_EINT,
},
[WM831X_IRQ_UV_LDO10] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO10_EINT,
},
[WM831X_IRQ_UV_DC1] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC1_EINT,
},
[WM831X_IRQ_UV_DC2] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC2_EINT,
},
[WM831X_IRQ_UV_DC3] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC3_EINT,
},
[WM831X_IRQ_UV_DC4] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC4_EINT,
},
};
static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
{
return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
}
static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
{
return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
}
static void __wm831x_enable_irq(struct wm831x *wm831x, int irq)
{
struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask;
wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
wm831x->irq_masks[irq_data->reg - 1]);
}
void wm831x_enable_irq(struct wm831x *wm831x, int irq)
{
mutex_lock(&wm831x->irq_lock);
__wm831x_enable_irq(wm831x, irq);
mutex_unlock(&wm831x->irq_lock);
}
EXPORT_SYMBOL_GPL(wm831x_enable_irq);
static void __wm831x_disable_irq(struct wm831x *wm831x, int irq)
{
struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask;
wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
wm831x->irq_masks[irq_data->reg - 1]);
}
void wm831x_disable_irq(struct wm831x *wm831x, int irq)
{
mutex_lock(&wm831x->irq_lock);
__wm831x_disable_irq(wm831x, irq);
mutex_unlock(&wm831x->irq_lock);
}
EXPORT_SYMBOL_GPL(wm831x_disable_irq);
int wm831x_request_irq(struct wm831x *wm831x,
unsigned int irq, irq_handler_t handler,
unsigned long flags, const char *name,
void *dev)
{
int ret = 0;
if (irq < 0 || irq >= WM831X_NUM_IRQS)
return -EINVAL;
mutex_lock(&wm831x->irq_lock);
if (wm831x_irqs[irq].handler) {
dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq);
ret = -EINVAL;
goto out;
}
wm831x_irqs[irq].handler = handler;
wm831x_irqs[irq].handler_data = dev;
__wm831x_enable_irq(wm831x, irq);
out:
mutex_unlock(&wm831x->irq_lock);
return ret;
}
EXPORT_SYMBOL_GPL(wm831x_request_irq);
void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data)
{
if (irq < 0 || irq >= WM831X_NUM_IRQS)
return;
mutex_lock(&wm831x->irq_lock);
wm831x_irqs[irq].handler = NULL;
wm831x_irqs[irq].handler_data = NULL;
__wm831x_disable_irq(wm831x, irq);
mutex_unlock(&wm831x->irq_lock);
}
EXPORT_SYMBOL_GPL(wm831x_free_irq);
static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status)
{
struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
if (irq_data->handler) {
irq_data->handler(irq, irq_data->handler_data);
wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data),
irq_data->mask);
} else {
dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq);
__wm831x_disable_irq(wm831x, irq);
}
}
/* Main interrupt handling occurs in a workqueue since we need
* interrupts enabled to interact with the chip. */
static void wm831x_irq_worker(struct work_struct *work)
{
struct wm831x *wm831x = container_of(work, struct wm831x, irq_work);
unsigned int i;
int primary;
int status_regs[5];
int read[5] = { 0 };
int *status;
primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
if (primary < 0) {
dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
primary);
goto out;
}
mutex_lock(&wm831x->irq_lock);
for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
int offset = wm831x_irqs[i].reg - 1;
if (!(primary & wm831x_irqs[i].primary))
continue;
status = &status_regs[offset];
/* Hopefully there should only be one register to read
* each time otherwise we ought to do a block read. */
if (!read[offset]) {
*status = wm831x_reg_read(wm831x,
irq_data_to_status_reg(&wm831x_irqs[i]));
if (*status < 0) {
dev_err(wm831x->dev,
"Failed to read IRQ status: %d\n",
*status);
goto out_lock;
}
/* Mask out the disabled IRQs */
*status &= ~wm831x->irq_masks[offset];
read[offset] = 1;
}
if (*status & wm831x_irqs[i].mask)
wm831x_handle_irq(wm831x, i, *status);
}
out_lock:
mutex_unlock(&wm831x->irq_lock);
out:
enable_irq(wm831x->irq);
}
static irqreturn_t wm831x_cpu_irq(int irq, void *data)
{
struct wm831x *wm831x = data;
/* Shut the interrupt to the CPU up and schedule the actual
* handler; we can't check that the IRQ is asserted. */
disable_irq_nosync(irq);
queue_work(wm831x->irq_wq, &wm831x->irq_work);
return IRQ_HANDLED;
}
int wm831x_irq_init(struct wm831x *wm831x, int irq)
{
int i, ret;
if (!irq) {
dev_warn(wm831x->dev,
"No interrupt specified - functionality limited\n");
return 0;
}
wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq");
if (!wm831x->irq_wq) {
dev_err(wm831x->dev, "Failed to allocate IRQ worker\n");
return -ESRCH;
}
wm831x->irq = irq;
mutex_init(&wm831x->irq_lock);
INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
/* Mask the individual interrupt sources */
for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) {
wm831x->irq_masks[i] = 0xffff;
wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
0xffff);
}
/* Enable top level interrupts, we mask at secondary level */
wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
/* We're good to go. We set IRQF_SHARED since there's a
* chance the driver will interoperate with another driver but
* the need to disable the IRQ while handing via I2C/SPI means
* that this may break and performance will be impacted. If
* this does happen it's a hardware design issue and the only
* other alternative would be polling.
*/
ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED,
"wm831x", wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
irq, ret);
return ret;
}
return 0;
}
void wm831x_irq_exit(struct wm831x *wm831x)
{
if (wm831x->irq)
free_irq(wm831x->irq, wm831x);
}