swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 219d54332a09e8d8741c1e1982f5eae56099de85 authored by Linus Torvalds on 25 November 2019, 00:32:01 UTC
Linux 5.4
Linux 5.4
Tip revision: 219d543
vc.c
// SPDX-License-Identifier: GPL-2.0
/*
* PCI Virtual Channel support
*
* Copyright (C) 2013 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*/
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/types.h>
#include "pci.h"
/**
* pci_vc_save_restore_dwords - Save or restore a series of dwords
* @dev: device
* @pos: starting config space position
* @buf: buffer to save to or restore from
* @dwords: number of dwords to save/restore
* @save: whether to save or restore
*/
static void pci_vc_save_restore_dwords(struct pci_dev *dev, int pos,
u32 *buf, int dwords, bool save)
{
int i;
for (i = 0; i < dwords; i++, buf++) {
if (save)
pci_read_config_dword(dev, pos + (i * 4), buf);
else
pci_write_config_dword(dev, pos + (i * 4), *buf);
}
}
/**
* pci_vc_load_arb_table - load and wait for VC arbitration table
* @dev: device
* @pos: starting position of VC capability (VC/VC9/MFVC)
*
* Set Load VC Arbitration Table bit requesting hardware to apply the VC
* Arbitration Table (previously loaded). When the VC Arbitration Table
* Status clears, hardware has latched the table into VC arbitration logic.
*/
static void pci_vc_load_arb_table(struct pci_dev *dev, int pos)
{
u16 ctrl;
pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL, &ctrl);
pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
ctrl | PCI_VC_PORT_CTRL_LOAD_TABLE);
if (pci_wait_for_pending(dev, pos + PCI_VC_PORT_STATUS,
PCI_VC_PORT_STATUS_TABLE))
return;
pci_err(dev, "VC arbitration table failed to load\n");
}
/**
* pci_vc_load_port_arb_table - Load and wait for VC port arbitration table
* @dev: device
* @pos: starting position of VC capability (VC/VC9/MFVC)
* @res: VC resource number, ie. VCn (0-7)
*
* Set Load Port Arbitration Table bit requesting hardware to apply the Port
* Arbitration Table (previously loaded). When the Port Arbitration Table
* Status clears, hardware has latched the table into port arbitration logic.
*/
static void pci_vc_load_port_arb_table(struct pci_dev *dev, int pos, int res)
{
int ctrl_pos, status_pos;
u32 ctrl;
ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
pci_read_config_dword(dev, ctrl_pos, &ctrl);
pci_write_config_dword(dev, ctrl_pos,
ctrl | PCI_VC_RES_CTRL_LOAD_TABLE);
if (pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_TABLE))
return;
pci_err(dev, "VC%d port arbitration table failed to load\n", res);
}
/**
* pci_vc_enable - Enable virtual channel
* @dev: device
* @pos: starting position of VC capability (VC/VC9/MFVC)
* @res: VC res number, ie. VCn (0-7)
*
* A VC is enabled by setting the enable bit in matching resource control
* registers on both sides of a link. We therefore need to find the opposite
* end of the link. To keep this simple we enable from the downstream device.
* RC devices do not have an upstream device, nor does it seem that VC9 do
* (spec is unclear). Once we find the upstream device, match the VC ID to
* get the correct resource, disable and enable on both ends.
*/
static void pci_vc_enable(struct pci_dev *dev, int pos, int res)
{
int ctrl_pos, status_pos, id, pos2, evcc, i, ctrl_pos2, status_pos2;
u32 ctrl, header, cap1, ctrl2;
struct pci_dev *link = NULL;
/* Enable VCs from the downstream device */
if (!pci_is_pcie(dev) || !pcie_downstream_port(dev))
return;
ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
pci_read_config_dword(dev, ctrl_pos, &ctrl);
id = ctrl & PCI_VC_RES_CTRL_ID;
pci_read_config_dword(dev, pos, &header);
/* If there is no opposite end of the link, skip to enable */
if (PCI_EXT_CAP_ID(header) == PCI_EXT_CAP_ID_VC9 ||
pci_is_root_bus(dev->bus))
goto enable;
pos2 = pci_find_ext_capability(dev->bus->self, PCI_EXT_CAP_ID_VC);
if (!pos2)
goto enable;
pci_read_config_dword(dev->bus->self, pos2 + PCI_VC_PORT_CAP1, &cap1);
evcc = cap1 & PCI_VC_CAP1_EVCC;
/* VC0 is hardwired enabled, so we can start with 1 */
for (i = 1; i < evcc + 1; i++) {
ctrl_pos2 = pos2 + PCI_VC_RES_CTRL +
(i * PCI_CAP_VC_PER_VC_SIZEOF);
status_pos2 = pos2 + PCI_VC_RES_STATUS +
(i * PCI_CAP_VC_PER_VC_SIZEOF);
pci_read_config_dword(dev->bus->self, ctrl_pos2, &ctrl2);
if ((ctrl2 & PCI_VC_RES_CTRL_ID) == id) {
link = dev->bus->self;
break;
}
}
if (!link)
goto enable;
/* Disable if enabled */
if (ctrl2 & PCI_VC_RES_CTRL_ENABLE) {
ctrl2 &= ~PCI_VC_RES_CTRL_ENABLE;
pci_write_config_dword(link, ctrl_pos2, ctrl2);
}
/* Enable on both ends */
ctrl2 |= PCI_VC_RES_CTRL_ENABLE;
pci_write_config_dword(link, ctrl_pos2, ctrl2);
enable:
ctrl |= PCI_VC_RES_CTRL_ENABLE;
pci_write_config_dword(dev, ctrl_pos, ctrl);
if (!pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_NEGO))
pci_err(dev, "VC%d negotiation stuck pending\n", id);
if (link && !pci_wait_for_pending(link, status_pos2,
PCI_VC_RES_STATUS_NEGO))
pci_err(link, "VC%d negotiation stuck pending\n", id);
}
/**
* pci_vc_do_save_buffer - Size, save, or restore VC state
* @dev: device
* @pos: starting position of VC capability (VC/VC9/MFVC)
* @save_state: buffer for save/restore
* @name: for error message
* @save: if provided a buffer, this indicates what to do with it
*
* Walking Virtual Channel config space to size, save, or restore it
* is complicated, so we do it all from one function to reduce code and
* guarantee ordering matches in the buffer. When called with NULL
* @save_state, return the size of the necessary save buffer. When called
* with a non-NULL @save_state, @save determines whether we save to the
* buffer or restore from it.
*/
static int pci_vc_do_save_buffer(struct pci_dev *dev, int pos,
struct pci_cap_saved_state *save_state,
bool save)
{
u32 cap1;
char evcc, lpevcc, parb_size;
int i, len = 0;
u8 *buf = save_state ? (u8 *)save_state->cap.data : NULL;
/* Sanity check buffer size for save/restore */
if (buf && save_state->cap.size !=
pci_vc_do_save_buffer(dev, pos, NULL, save)) {
pci_err(dev, "VC save buffer size does not match @0x%x\n", pos);
return -ENOMEM;
}
pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP1, &cap1);
/* Extended VC Count (not counting VC0) */
evcc = cap1 & PCI_VC_CAP1_EVCC;
/* Low Priority Extended VC Count (not counting VC0) */
lpevcc = (cap1 & PCI_VC_CAP1_LPEVCC) >> 4;
/* Port Arbitration Table Entry Size (bits) */
parb_size = 1 << ((cap1 & PCI_VC_CAP1_ARB_SIZE) >> 10);
/*
* Port VC Control Register contains VC Arbitration Select, which
* cannot be modified when more than one LPVC is in operation. We
* therefore save/restore it first, as only VC0 should be enabled
* after device reset.
*/
if (buf) {
if (save)
pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL,
(u16 *)buf);
else
pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
*(u16 *)buf);
buf += 4;
}
len += 4;
/*
* If we have any Low Priority VCs and a VC Arbitration Table Offset
* in Port VC Capability Register 2 then save/restore it next.
*/
if (lpevcc) {
u32 cap2;
int vcarb_offset;
pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP2, &cap2);
vcarb_offset = ((cap2 & PCI_VC_CAP2_ARB_OFF) >> 24) * 16;
if (vcarb_offset) {
int size, vcarb_phases = 0;
if (cap2 & PCI_VC_CAP2_128_PHASE)
vcarb_phases = 128;
else if (cap2 & PCI_VC_CAP2_64_PHASE)
vcarb_phases = 64;
else if (cap2 & PCI_VC_CAP2_32_PHASE)
vcarb_phases = 32;
/* Fixed 4 bits per phase per lpevcc (plus VC0) */
size = ((lpevcc + 1) * vcarb_phases * 4) / 8;
if (size && buf) {
pci_vc_save_restore_dwords(dev,
pos + vcarb_offset,
(u32 *)buf,
size / 4, save);
/*
* On restore, we need to signal hardware to
* re-load the VC Arbitration Table.
*/
if (!save)
pci_vc_load_arb_table(dev, pos);
buf += size;
}
len += size;
}
}
/*
* In addition to each VC Resource Control Register, we may have a
* Port Arbitration Table attached to each VC. The Port Arbitration
* Table Offset in each VC Resource Capability Register tells us if
* it exists. The entry size is global from the Port VC Capability
* Register1 above. The number of phases is determined per VC.
*/
for (i = 0; i < evcc + 1; i++) {
u32 cap;
int parb_offset;
pci_read_config_dword(dev, pos + PCI_VC_RES_CAP +
(i * PCI_CAP_VC_PER_VC_SIZEOF), &cap);
parb_offset = ((cap & PCI_VC_RES_CAP_ARB_OFF) >> 24) * 16;
if (parb_offset) {
int size, parb_phases = 0;
if (cap & PCI_VC_RES_CAP_256_PHASE)
parb_phases = 256;
else if (cap & (PCI_VC_RES_CAP_128_PHASE |
PCI_VC_RES_CAP_128_PHASE_TB))
parb_phases = 128;
else if (cap & PCI_VC_RES_CAP_64_PHASE)
parb_phases = 64;
else if (cap & PCI_VC_RES_CAP_32_PHASE)
parb_phases = 32;
size = (parb_size * parb_phases) / 8;
if (size && buf) {
pci_vc_save_restore_dwords(dev,
pos + parb_offset,
(u32 *)buf,
size / 4, save);
buf += size;
}
len += size;
}
/* VC Resource Control Register */
if (buf) {
int ctrl_pos = pos + PCI_VC_RES_CTRL +
(i * PCI_CAP_VC_PER_VC_SIZEOF);
if (save)
pci_read_config_dword(dev, ctrl_pos,
(u32 *)buf);
else {
u32 tmp, ctrl = *(u32 *)buf;
/*
* For an FLR case, the VC config may remain.
* Preserve enable bit, restore the rest.
*/
pci_read_config_dword(dev, ctrl_pos, &tmp);
tmp &= PCI_VC_RES_CTRL_ENABLE;
tmp |= ctrl & ~PCI_VC_RES_CTRL_ENABLE;
pci_write_config_dword(dev, ctrl_pos, tmp);
/* Load port arbitration table if used */
if (ctrl & PCI_VC_RES_CTRL_ARB_SELECT)
pci_vc_load_port_arb_table(dev, pos, i);
/* Re-enable if needed */
if ((ctrl ^ tmp) & PCI_VC_RES_CTRL_ENABLE)
pci_vc_enable(dev, pos, i);
}
buf += 4;
}
len += 4;
}
return buf ? 0 : len;
}
static struct {
u16 id;
const char *name;
} vc_caps[] = { { PCI_EXT_CAP_ID_MFVC, "MFVC" },
{ PCI_EXT_CAP_ID_VC, "VC" },
{ PCI_EXT_CAP_ID_VC9, "VC9" } };
/**
* pci_save_vc_state - Save VC state to pre-allocate save buffer
* @dev: device
*
* For each type of VC capability, VC/VC9/MFVC, find the capability and
* save it to the pre-allocated save buffer.
*/
int pci_save_vc_state(struct pci_dev *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
int pos, ret;
struct pci_cap_saved_state *save_state;
pos = pci_find_ext_capability(dev, vc_caps[i].id);
if (!pos)
continue;
save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
if (!save_state) {
pci_err(dev, "%s buffer not found in %s\n",
vc_caps[i].name, __func__);
return -ENOMEM;
}
ret = pci_vc_do_save_buffer(dev, pos, save_state, true);
if (ret) {
pci_err(dev, "%s save unsuccessful %s\n",
vc_caps[i].name, __func__);
return ret;
}
}
return 0;
}
/**
* pci_restore_vc_state - Restore VC state from save buffer
* @dev: device
*
* For each type of VC capability, VC/VC9/MFVC, find the capability and
* restore it from the previously saved buffer.
*/
void pci_restore_vc_state(struct pci_dev *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
int pos;
struct pci_cap_saved_state *save_state;
pos = pci_find_ext_capability(dev, vc_caps[i].id);
save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
if (!save_state || !pos)
continue;
pci_vc_do_save_buffer(dev, pos, save_state, false);
}
}
/**
* pci_allocate_vc_save_buffers - Allocate save buffers for VC caps
* @dev: device
*
* For each type of VC capability, VC/VC9/MFVC, find the capability, size
* it, and allocate a buffer for save/restore.
*/
void pci_allocate_vc_save_buffers(struct pci_dev *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
int len, pos = pci_find_ext_capability(dev, vc_caps[i].id);
if (!pos)
continue;
len = pci_vc_do_save_buffer(dev, pos, NULL, false);
if (pci_add_ext_cap_save_buffer(dev, vc_caps[i].id, len))
pci_err(dev, "unable to preallocate %s save buffer\n",
vc_caps[i].name);
}
}