swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 0477e92881850d44910a7e94fc2c46f96faa131f authored by Linus Torvalds on 06 December 2020, 22:25:12 UTC
Linux 5.10-rc7
Linux 5.10-rc7
Tip revision: 0477e92
axp20x-regulator.c
/*
* AXP20x regulators driver.
*
* Copyright (C) 2013 Carlo Caione <carlo@caione.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/mfd/axp20x.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#define AXP20X_GPIO0_FUNC_MASK GENMASK(3, 0)
#define AXP20X_GPIO1_FUNC_MASK GENMASK(3, 0)
#define AXP20X_IO_ENABLED 0x03
#define AXP20X_IO_DISABLED 0x07
#define AXP20X_WORKMODE_DCDC2_MASK BIT_MASK(2)
#define AXP20X_WORKMODE_DCDC3_MASK BIT_MASK(1)
#define AXP20X_FREQ_DCDC_MASK GENMASK(3, 0)
#define AXP20X_VBUS_IPSOUT_MGMT_MASK BIT_MASK(2)
#define AXP20X_DCDC2_V_OUT_MASK GENMASK(5, 0)
#define AXP20X_DCDC3_V_OUT_MASK GENMASK(7, 0)
#define AXP20X_LDO2_V_OUT_MASK GENMASK(7, 4)
#define AXP20X_LDO3_V_OUT_MASK GENMASK(6, 0)
#define AXP20X_LDO4_V_OUT_MASK GENMASK(3, 0)
#define AXP20X_LDO5_V_OUT_MASK GENMASK(7, 4)
#define AXP20X_PWR_OUT_EXTEN_MASK BIT_MASK(0)
#define AXP20X_PWR_OUT_DCDC3_MASK BIT_MASK(1)
#define AXP20X_PWR_OUT_LDO2_MASK BIT_MASK(2)
#define AXP20X_PWR_OUT_LDO4_MASK BIT_MASK(3)
#define AXP20X_PWR_OUT_DCDC2_MASK BIT_MASK(4)
#define AXP20X_PWR_OUT_LDO3_MASK BIT_MASK(6)
#define AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK BIT_MASK(0)
#define AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE(x) \
((x) << 0)
#define AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK BIT_MASK(1)
#define AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE(x) \
((x) << 1)
#define AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK BIT_MASK(2)
#define AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN BIT(2)
#define AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK BIT_MASK(3)
#define AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN BIT(3)
#define AXP20X_LDO4_V_OUT_1250mV_START 0x0
#define AXP20X_LDO4_V_OUT_1250mV_STEPS 0
#define AXP20X_LDO4_V_OUT_1250mV_END \
(AXP20X_LDO4_V_OUT_1250mV_START + AXP20X_LDO4_V_OUT_1250mV_STEPS)
#define AXP20X_LDO4_V_OUT_1300mV_START 0x1
#define AXP20X_LDO4_V_OUT_1300mV_STEPS 7
#define AXP20X_LDO4_V_OUT_1300mV_END \
(AXP20X_LDO4_V_OUT_1300mV_START + AXP20X_LDO4_V_OUT_1300mV_STEPS)
#define AXP20X_LDO4_V_OUT_2500mV_START 0x9
#define AXP20X_LDO4_V_OUT_2500mV_STEPS 0
#define AXP20X_LDO4_V_OUT_2500mV_END \
(AXP20X_LDO4_V_OUT_2500mV_START + AXP20X_LDO4_V_OUT_2500mV_STEPS)
#define AXP20X_LDO4_V_OUT_2700mV_START 0xa
#define AXP20X_LDO4_V_OUT_2700mV_STEPS 1
#define AXP20X_LDO4_V_OUT_2700mV_END \
(AXP20X_LDO4_V_OUT_2700mV_START + AXP20X_LDO4_V_OUT_2700mV_STEPS)
#define AXP20X_LDO4_V_OUT_3000mV_START 0xc
#define AXP20X_LDO4_V_OUT_3000mV_STEPS 3
#define AXP20X_LDO4_V_OUT_3000mV_END \
(AXP20X_LDO4_V_OUT_3000mV_START + AXP20X_LDO4_V_OUT_3000mV_STEPS)
#define AXP20X_LDO4_V_OUT_NUM_VOLTAGES 16
#define AXP22X_IO_ENABLED 0x03
#define AXP22X_IO_DISABLED 0x04
#define AXP22X_WORKMODE_DCDCX_MASK(x) BIT_MASK(x)
#define AXP22X_MISC_N_VBUSEN_FUNC BIT(4)
#define AXP22X_DCDC1_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_DCDC2_V_OUT_MASK GENMASK(5, 0)
#define AXP22X_DCDC3_V_OUT_MASK GENMASK(5, 0)
#define AXP22X_DCDC4_V_OUT_MASK GENMASK(5, 0)
#define AXP22X_DCDC5_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_DC5LDO_V_OUT_MASK GENMASK(2, 0)
#define AXP22X_ALDO1_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_ALDO2_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_ALDO3_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_DLDO1_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_DLDO2_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_DLDO3_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_DLDO4_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_ELDO1_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_ELDO2_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_ELDO3_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_LDO_IO0_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_LDO_IO1_V_OUT_MASK GENMASK(4, 0)
#define AXP22X_PWR_OUT_DC5LDO_MASK BIT_MASK(0)
#define AXP22X_PWR_OUT_DCDC1_MASK BIT_MASK(1)
#define AXP22X_PWR_OUT_DCDC2_MASK BIT_MASK(2)
#define AXP22X_PWR_OUT_DCDC3_MASK BIT_MASK(3)
#define AXP22X_PWR_OUT_DCDC4_MASK BIT_MASK(4)
#define AXP22X_PWR_OUT_DCDC5_MASK BIT_MASK(5)
#define AXP22X_PWR_OUT_ALDO1_MASK BIT_MASK(6)
#define AXP22X_PWR_OUT_ALDO2_MASK BIT_MASK(7)
#define AXP22X_PWR_OUT_SW_MASK BIT_MASK(6)
#define AXP22X_PWR_OUT_DC1SW_MASK BIT_MASK(7)
#define AXP22X_PWR_OUT_ELDO1_MASK BIT_MASK(0)
#define AXP22X_PWR_OUT_ELDO2_MASK BIT_MASK(1)
#define AXP22X_PWR_OUT_ELDO3_MASK BIT_MASK(2)
#define AXP22X_PWR_OUT_DLDO1_MASK BIT_MASK(3)
#define AXP22X_PWR_OUT_DLDO2_MASK BIT_MASK(4)
#define AXP22X_PWR_OUT_DLDO3_MASK BIT_MASK(5)
#define AXP22X_PWR_OUT_DLDO4_MASK BIT_MASK(6)
#define AXP22X_PWR_OUT_ALDO3_MASK BIT_MASK(7)
#define AXP803_PWR_OUT_DCDC1_MASK BIT_MASK(0)
#define AXP803_PWR_OUT_DCDC2_MASK BIT_MASK(1)
#define AXP803_PWR_OUT_DCDC3_MASK BIT_MASK(2)
#define AXP803_PWR_OUT_DCDC4_MASK BIT_MASK(3)
#define AXP803_PWR_OUT_DCDC5_MASK BIT_MASK(4)
#define AXP803_PWR_OUT_DCDC6_MASK BIT_MASK(5)
#define AXP803_PWR_OUT_FLDO1_MASK BIT_MASK(2)
#define AXP803_PWR_OUT_FLDO2_MASK BIT_MASK(3)
#define AXP803_DCDC1_V_OUT_MASK GENMASK(4, 0)
#define AXP803_DCDC2_V_OUT_MASK GENMASK(6, 0)
#define AXP803_DCDC3_V_OUT_MASK GENMASK(6, 0)
#define AXP803_DCDC4_V_OUT_MASK GENMASK(6, 0)
#define AXP803_DCDC5_V_OUT_MASK GENMASK(6, 0)
#define AXP803_DCDC6_V_OUT_MASK GENMASK(6, 0)
#define AXP803_FLDO1_V_OUT_MASK GENMASK(3, 0)
#define AXP803_FLDO2_V_OUT_MASK GENMASK(3, 0)
#define AXP803_DCDC23_POLYPHASE_DUAL BIT(6)
#define AXP803_DCDC56_POLYPHASE_DUAL BIT(5)
#define AXP803_DCDC234_500mV_START 0x00
#define AXP803_DCDC234_500mV_STEPS 70
#define AXP803_DCDC234_500mV_END \
(AXP803_DCDC234_500mV_START + AXP803_DCDC234_500mV_STEPS)
#define AXP803_DCDC234_1220mV_START 0x47
#define AXP803_DCDC234_1220mV_STEPS 4
#define AXP803_DCDC234_1220mV_END \
(AXP803_DCDC234_1220mV_START + AXP803_DCDC234_1220mV_STEPS)
#define AXP803_DCDC234_NUM_VOLTAGES 76
#define AXP803_DCDC5_800mV_START 0x00
#define AXP803_DCDC5_800mV_STEPS 32
#define AXP803_DCDC5_800mV_END \
(AXP803_DCDC5_800mV_START + AXP803_DCDC5_800mV_STEPS)
#define AXP803_DCDC5_1140mV_START 0x21
#define AXP803_DCDC5_1140mV_STEPS 35
#define AXP803_DCDC5_1140mV_END \
(AXP803_DCDC5_1140mV_START + AXP803_DCDC5_1140mV_STEPS)
#define AXP803_DCDC5_NUM_VOLTAGES 69
#define AXP803_DCDC6_600mV_START 0x00
#define AXP803_DCDC6_600mV_STEPS 50
#define AXP803_DCDC6_600mV_END \
(AXP803_DCDC6_600mV_START + AXP803_DCDC6_600mV_STEPS)
#define AXP803_DCDC6_1120mV_START 0x33
#define AXP803_DCDC6_1120mV_STEPS 20
#define AXP803_DCDC6_1120mV_END \
(AXP803_DCDC6_1120mV_START + AXP803_DCDC6_1120mV_STEPS)
#define AXP803_DCDC6_NUM_VOLTAGES 72
#define AXP803_DLDO2_700mV_START 0x00
#define AXP803_DLDO2_700mV_STEPS 26
#define AXP803_DLDO2_700mV_END \
(AXP803_DLDO2_700mV_START + AXP803_DLDO2_700mV_STEPS)
#define AXP803_DLDO2_3400mV_START 0x1b
#define AXP803_DLDO2_3400mV_STEPS 4
#define AXP803_DLDO2_3400mV_END \
(AXP803_DLDO2_3400mV_START + AXP803_DLDO2_3400mV_STEPS)
#define AXP803_DLDO2_NUM_VOLTAGES 32
#define AXP806_DCDCA_V_CTRL_MASK GENMASK(6, 0)
#define AXP806_DCDCB_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_DCDCC_V_CTRL_MASK GENMASK(6, 0)
#define AXP806_DCDCD_V_CTRL_MASK GENMASK(5, 0)
#define AXP806_DCDCE_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_ALDO1_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_ALDO2_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_ALDO3_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_BLDO1_V_CTRL_MASK GENMASK(3, 0)
#define AXP806_BLDO2_V_CTRL_MASK GENMASK(3, 0)
#define AXP806_BLDO3_V_CTRL_MASK GENMASK(3, 0)
#define AXP806_BLDO4_V_CTRL_MASK GENMASK(3, 0)
#define AXP806_CLDO1_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_CLDO2_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_CLDO3_V_CTRL_MASK GENMASK(4, 0)
#define AXP806_PWR_OUT_DCDCA_MASK BIT_MASK(0)
#define AXP806_PWR_OUT_DCDCB_MASK BIT_MASK(1)
#define AXP806_PWR_OUT_DCDCC_MASK BIT_MASK(2)
#define AXP806_PWR_OUT_DCDCD_MASK BIT_MASK(3)
#define AXP806_PWR_OUT_DCDCE_MASK BIT_MASK(4)
#define AXP806_PWR_OUT_ALDO1_MASK BIT_MASK(5)
#define AXP806_PWR_OUT_ALDO2_MASK BIT_MASK(6)
#define AXP806_PWR_OUT_ALDO3_MASK BIT_MASK(7)
#define AXP806_PWR_OUT_BLDO1_MASK BIT_MASK(0)
#define AXP806_PWR_OUT_BLDO2_MASK BIT_MASK(1)
#define AXP806_PWR_OUT_BLDO3_MASK BIT_MASK(2)
#define AXP806_PWR_OUT_BLDO4_MASK BIT_MASK(3)
#define AXP806_PWR_OUT_CLDO1_MASK BIT_MASK(4)
#define AXP806_PWR_OUT_CLDO2_MASK BIT_MASK(5)
#define AXP806_PWR_OUT_CLDO3_MASK BIT_MASK(6)
#define AXP806_PWR_OUT_SW_MASK BIT_MASK(7)
#define AXP806_DCDCAB_POLYPHASE_DUAL 0x40
#define AXP806_DCDCABC_POLYPHASE_TRI 0x80
#define AXP806_DCDCABC_POLYPHASE_MASK GENMASK(7, 6)
#define AXP806_DCDCDE_POLYPHASE_DUAL BIT(5)
#define AXP806_DCDCA_600mV_START 0x00
#define AXP806_DCDCA_600mV_STEPS 50
#define AXP806_DCDCA_600mV_END \
(AXP806_DCDCA_600mV_START + AXP806_DCDCA_600mV_STEPS)
#define AXP806_DCDCA_1120mV_START 0x33
#define AXP806_DCDCA_1120mV_STEPS 20
#define AXP806_DCDCA_1120mV_END \
(AXP806_DCDCA_1120mV_START + AXP806_DCDCA_1120mV_STEPS)
#define AXP806_DCDCA_NUM_VOLTAGES 72
#define AXP806_DCDCD_600mV_START 0x00
#define AXP806_DCDCD_600mV_STEPS 45
#define AXP806_DCDCD_600mV_END \
(AXP806_DCDCD_600mV_START + AXP806_DCDCD_600mV_STEPS)
#define AXP806_DCDCD_1600mV_START 0x2e
#define AXP806_DCDCD_1600mV_STEPS 17
#define AXP806_DCDCD_1600mV_END \
(AXP806_DCDCD_1600mV_START + AXP806_DCDCD_1600mV_STEPS)
#define AXP806_DCDCD_NUM_VOLTAGES 64
#define AXP809_DCDC4_600mV_START 0x00
#define AXP809_DCDC4_600mV_STEPS 47
#define AXP809_DCDC4_600mV_END \
(AXP809_DCDC4_600mV_START + AXP809_DCDC4_600mV_STEPS)
#define AXP809_DCDC4_1800mV_START 0x30
#define AXP809_DCDC4_1800mV_STEPS 8
#define AXP809_DCDC4_1800mV_END \
(AXP809_DCDC4_1800mV_START + AXP809_DCDC4_1800mV_STEPS)
#define AXP809_DCDC4_NUM_VOLTAGES 57
#define AXP813_DCDC7_V_OUT_MASK GENMASK(6, 0)
#define AXP813_PWR_OUT_DCDC7_MASK BIT_MASK(6)
#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _enable_val, _disable_val) \
[_family##_##_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enable_val), \
.disable_val = (_disable_val), \
.ops = &axp20x_ops, \
}
#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask) \
[_family##_##_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.ops = &axp20x_ops, \
}
#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \
[_family##_##_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = _family##_##_id, \
.owner = THIS_MODULE, \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.ops = &axp20x_ops_sw, \
}
#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \
[_family##_##_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = _family##_##_id, \
.n_voltages = 1, \
.owner = THIS_MODULE, \
.min_uV = (_volt) * 1000, \
.ops = &axp20x_ops_fixed \
}
#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \
_vreg, _vmask, _ereg, _emask) \
[_family##_##_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = _family##_##_id, \
.n_voltages = (_n_voltages), \
.owner = THIS_MODULE, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.linear_ranges = (_ranges), \
.n_linear_ranges = ARRAY_SIZE(_ranges), \
.ops = &axp20x_ops_range, \
}
static const int axp209_dcdc2_ldo3_slew_rates[] = {
1600,
800,
};
static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
u8 reg, mask, enable, cfg = 0xff;
const int *slew_rates;
int rate_count = 0;
switch (axp20x->variant) {
case AXP209_ID:
if (id == AXP20X_DCDC2) {
slew_rates = axp209_dcdc2_ldo3_slew_rates;
rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates);
reg = AXP20X_DCDC2_LDO3_V_RAMP;
mask = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE_MASK |
AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN_MASK;
enable = (ramp > 0) ?
AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_EN : 0;
break;
}
if (id == AXP20X_LDO3) {
slew_rates = axp209_dcdc2_ldo3_slew_rates;
rate_count = ARRAY_SIZE(axp209_dcdc2_ldo3_slew_rates);
reg = AXP20X_DCDC2_LDO3_V_RAMP;
mask = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE_MASK |
AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN_MASK;
enable = (ramp > 0) ?
AXP20X_DCDC2_LDO3_V_RAMP_LDO3_EN : 0;
break;
}
if (rate_count > 0)
break;
fallthrough;
default:
/* Not supported for this regulator */
return -ENOTSUPP;
}
if (ramp == 0) {
cfg = enable;
} else {
int i;
for (i = 0; i < rate_count; i++) {
if (ramp > slew_rates[i])
break;
if (id == AXP20X_DCDC2)
cfg = AXP20X_DCDC2_LDO3_V_RAMP_DCDC2_RATE(i);
else
cfg = AXP20X_DCDC2_LDO3_V_RAMP_LDO3_RATE(i);
}
if (cfg == 0xff) {
dev_err(axp20x->dev, "unsupported ramp value %d", ramp);
return -EINVAL;
}
cfg |= enable;
}
return regmap_update_bits(axp20x->regmap, reg, mask, cfg);
}
static int axp20x_regulator_enable_regmap(struct regulator_dev *rdev)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
switch (axp20x->variant) {
case AXP209_ID:
if ((id == AXP20X_LDO3) &&
rdev->constraints && rdev->constraints->soft_start) {
int v_out;
int ret;
/*
* On some boards, the LDO3 can be overloaded when
* turning on, causing the entire PMIC to shutdown
* without warning. Turning it on at the minimal voltage
* and then setting the voltage to the requested value
* works reliably.
*/
if (regulator_is_enabled_regmap(rdev))
break;
v_out = regulator_get_voltage_sel_regmap(rdev);
if (v_out < 0)
return v_out;
if (v_out == 0)
break;
ret = regulator_set_voltage_sel_regmap(rdev, 0x00);
/*
* A small pause is needed between
* setting the voltage and enabling the LDO to give the
* internal state machine time to process the request.
*/
usleep_range(1000, 5000);
ret |= regulator_enable_regmap(rdev);
ret |= regulator_set_voltage_sel_regmap(rdev, v_out);
return ret;
}
break;
default:
/* No quirks */
break;
}
return regulator_enable_regmap(rdev);
};
static const struct regulator_ops axp20x_ops_fixed = {
.list_voltage = regulator_list_voltage_linear,
};
static const struct regulator_ops axp20x_ops_range = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear_range,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_ops axp20x_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.enable = axp20x_regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_ramp_delay = axp20x_set_ramp_delay,
};
static const struct regulator_ops axp20x_ops_sw = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct linear_range axp20x_ldo4_ranges[] = {
REGULATOR_LINEAR_RANGE(1250000,
AXP20X_LDO4_V_OUT_1250mV_START,
AXP20X_LDO4_V_OUT_1250mV_END,
0),
REGULATOR_LINEAR_RANGE(1300000,
AXP20X_LDO4_V_OUT_1300mV_START,
AXP20X_LDO4_V_OUT_1300mV_END,
100000),
REGULATOR_LINEAR_RANGE(2500000,
AXP20X_LDO4_V_OUT_2500mV_START,
AXP20X_LDO4_V_OUT_2500mV_END,
0),
REGULATOR_LINEAR_RANGE(2700000,
AXP20X_LDO4_V_OUT_2700mV_START,
AXP20X_LDO4_V_OUT_2700mV_END,
100000),
REGULATOR_LINEAR_RANGE(3000000,
AXP20X_LDO4_V_OUT_3000mV_START,
AXP20X_LDO4_V_OUT_3000mV_END,
100000),
};
static const struct regulator_desc axp20x_regulators[] = {
AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
AXP20X_DCDC2_V_OUT, AXP20X_DCDC2_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_DCDC2_MASK),
AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25,
AXP20X_DCDC3_V_OUT, AXP20X_DCDC3_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_DCDC3_MASK),
AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300),
AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
AXP20X_LDO24_V_OUT, AXP20X_LDO2_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_LDO2_MASK),
AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25,
AXP20X_LDO3_V_OUT, AXP20X_LDO3_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_LDO3_MASK),
AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in",
axp20x_ldo4_ranges, AXP20X_LDO4_V_OUT_NUM_VOLTAGES,
AXP20X_LDO24_V_OUT, AXP20X_LDO4_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_LDO4_MASK),
AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
AXP20X_LDO5_V_OUT, AXP20X_LDO5_V_OUT_MASK,
AXP20X_GPIO0_CTRL, AXP20X_GPIO0_FUNC_MASK,
AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
};
static const struct regulator_desc axp22x_regulators[] = {
AXP_DESC(AXP22X, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
AXP22X_DCDC1_V_OUT, AXP22X_DCDC1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC1_MASK),
AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
AXP22X_DCDC2_V_OUT, AXP22X_DCDC2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC2_MASK),
AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
AXP22X_DCDC3_V_OUT, AXP22X_DCDC3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC3_MASK),
AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC4_MASK),
AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
AXP22X_DCDC5_V_OUT, AXP22X_DCDC5_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC5_MASK),
/* secondary switchable output of DCDC1 */
AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DC1SW_MASK),
/* LDO regulator internally chained to DCDC5 */
AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
AXP22X_DC5LDO_V_OUT, AXP22X_DC5LDO_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DC5LDO_MASK),
AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP22X, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP22X, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP22X_PWR_OUT_ALDO3_MASK),
AXP_DESC(AXP22X, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
AXP22X_DLDO1_V_OUT, AXP22X_DLDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
AXP22X_DLDO2_V_OUT, AXP22X_PWR_OUT_DLDO2_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO3_MASK),
AXP_DESC(AXP22X, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
AXP22X_DLDO4_V_OUT, AXP22X_DLDO4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO4_MASK),
AXP_DESC(AXP22X, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
AXP22X_ELDO1_V_OUT, AXP22X_ELDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO1_MASK),
AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
/* Note the datasheet only guarantees reliable operation up to
* 3.3V, this needs to be enforced via dts provided constraints */
AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
AXP22X_LDO_IO0_V_OUT, AXP22X_LDO_IO0_V_OUT_MASK,
AXP20X_GPIO0_CTRL, AXP20X_GPIO0_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
/* Note the datasheet only guarantees reliable operation up to
* 3.3V, this needs to be enforced via dts provided constraints */
AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
AXP22X_LDO_IO1_V_OUT, AXP22X_LDO_IO1_V_OUT_MASK,
AXP20X_GPIO1_CTRL, AXP20X_GPIO1_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
};
static const struct regulator_desc axp22x_drivevbus_regulator = {
.name = "drivevbus",
.supply_name = "drivevbus",
.of_match = of_match_ptr("drivevbus"),
.regulators_node = of_match_ptr("regulators"),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = AXP20X_VBUS_IPSOUT_MGMT,
.enable_mask = AXP20X_VBUS_IPSOUT_MGMT_MASK,
.ops = &axp20x_ops_sw,
};
/* DCDC ranges shared with AXP813 */
static const struct linear_range axp803_dcdc234_ranges[] = {
REGULATOR_LINEAR_RANGE(500000,
AXP803_DCDC234_500mV_START,
AXP803_DCDC234_500mV_END,
10000),
REGULATOR_LINEAR_RANGE(1220000,
AXP803_DCDC234_1220mV_START,
AXP803_DCDC234_1220mV_END,
20000),
};
static const struct linear_range axp803_dcdc5_ranges[] = {
REGULATOR_LINEAR_RANGE(800000,
AXP803_DCDC5_800mV_START,
AXP803_DCDC5_800mV_END,
10000),
REGULATOR_LINEAR_RANGE(1140000,
AXP803_DCDC5_1140mV_START,
AXP803_DCDC5_1140mV_END,
20000),
};
static const struct linear_range axp803_dcdc6_ranges[] = {
REGULATOR_LINEAR_RANGE(600000,
AXP803_DCDC6_600mV_START,
AXP803_DCDC6_600mV_END,
10000),
REGULATOR_LINEAR_RANGE(1120000,
AXP803_DCDC6_1120mV_START,
AXP803_DCDC6_1120mV_END,
20000),
};
/* AXP806's CLDO2 and AXP809's DLDO1 share the same range */
static const struct linear_range axp803_dldo2_ranges[] = {
REGULATOR_LINEAR_RANGE(700000,
AXP803_DLDO2_700mV_START,
AXP803_DLDO2_700mV_END,
100000),
REGULATOR_LINEAR_RANGE(3400000,
AXP803_DLDO2_3400mV_START,
AXP803_DLDO2_3400mV_END,
200000),
};
static const struct regulator_desc axp803_regulators[] = {
AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
AXP803_DCDC1_V_OUT, AXP803_DCDC1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC1_MASK),
AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2",
axp803_dcdc234_ranges, AXP803_DCDC234_NUM_VOLTAGES,
AXP803_DCDC2_V_OUT, AXP803_DCDC2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC2_MASK),
AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3",
axp803_dcdc234_ranges, AXP803_DCDC234_NUM_VOLTAGES,
AXP803_DCDC3_V_OUT, AXP803_DCDC3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC3_MASK),
AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4",
axp803_dcdc234_ranges, AXP803_DCDC234_NUM_VOLTAGES,
AXP803_DCDC4_V_OUT, AXP803_DCDC4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC4_MASK),
AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5",
axp803_dcdc5_ranges, AXP803_DCDC5_NUM_VOLTAGES,
AXP803_DCDC5_V_OUT, AXP803_DCDC5_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC5_MASK),
AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6",
axp803_dcdc6_ranges, AXP803_DCDC6_NUM_VOLTAGES,
AXP803_DCDC6_V_OUT, AXP803_DCDC6_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC6_MASK),
/* secondary switchable output of DCDC1 */
AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DC1SW_MASK),
AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO3_MASK),
AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
AXP22X_DLDO1_V_OUT, AXP22X_DLDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO3_MASK),
AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
AXP22X_DLDO4_V_OUT, AXP22X_DLDO4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO4_MASK),
AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
AXP22X_ELDO1_V_OUT, AXP22X_ELDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO1_MASK),
AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
AXP803_FLDO1_V_OUT, AXP803_FLDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP803_PWR_OUT_FLDO1_MASK),
AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
AXP803_FLDO2_V_OUT, AXP803_FLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP803_PWR_OUT_FLDO2_MASK),
AXP_DESC_IO(AXP803, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
AXP22X_LDO_IO0_V_OUT, AXP22X_LDO_IO0_V_OUT_MASK,
AXP20X_GPIO0_CTRL, AXP20X_GPIO0_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_IO(AXP803, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
AXP22X_LDO_IO1_V_OUT, AXP22X_LDO_IO1_V_OUT_MASK,
AXP20X_GPIO1_CTRL, AXP20X_GPIO1_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000),
};
static const struct linear_range axp806_dcdca_ranges[] = {
REGULATOR_LINEAR_RANGE(600000,
AXP806_DCDCA_600mV_START,
AXP806_DCDCA_600mV_END,
10000),
REGULATOR_LINEAR_RANGE(1120000,
AXP806_DCDCA_1120mV_START,
AXP806_DCDCA_1120mV_END,
20000),
};
static const struct linear_range axp806_dcdcd_ranges[] = {
REGULATOR_LINEAR_RANGE(600000,
AXP806_DCDCD_600mV_START,
AXP806_DCDCD_600mV_END,
20000),
REGULATOR_LINEAR_RANGE(1600000,
AXP806_DCDCD_1600mV_START,
AXP806_DCDCD_1600mV_END,
100000),
};
static const struct regulator_desc axp806_regulators[] = {
AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina",
axp806_dcdca_ranges, AXP806_DCDCA_NUM_VOLTAGES,
AXP806_DCDCA_V_CTRL, AXP806_DCDCA_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCA_MASK),
AXP_DESC(AXP806, DCDCB, "dcdcb", "vinb", 1000, 2550, 50,
AXP806_DCDCB_V_CTRL, AXP806_DCDCB_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCB_MASK),
AXP_DESC_RANGES(AXP806, DCDCC, "dcdcc", "vinc",
axp806_dcdca_ranges, AXP806_DCDCA_NUM_VOLTAGES,
AXP806_DCDCC_V_CTRL, AXP806_DCDCC_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCC_MASK),
AXP_DESC_RANGES(AXP806, DCDCD, "dcdcd", "vind",
axp806_dcdcd_ranges, AXP806_DCDCD_NUM_VOLTAGES,
AXP806_DCDCD_V_CTRL, AXP806_DCDCD_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCD_MASK),
AXP_DESC(AXP806, DCDCE, "dcdce", "vine", 1100, 3400, 100,
AXP806_DCDCE_V_CTRL, AXP806_DCDCE_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCE_MASK),
AXP_DESC(AXP806, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP806_ALDO1_V_CTRL, AXP806_ALDO1_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP806, ALDO2, "aldo2", "aldoin", 700, 3400, 100,
AXP806_ALDO2_V_CTRL, AXP806_ALDO2_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP806, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP806_ALDO3_V_CTRL, AXP806_ALDO3_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_ALDO3_MASK),
AXP_DESC(AXP806, BLDO1, "bldo1", "bldoin", 700, 1900, 100,
AXP806_BLDO1_V_CTRL, AXP806_BLDO1_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO1_MASK),
AXP_DESC(AXP806, BLDO2, "bldo2", "bldoin", 700, 1900, 100,
AXP806_BLDO2_V_CTRL, AXP806_BLDO2_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO2_MASK),
AXP_DESC(AXP806, BLDO3, "bldo3", "bldoin", 700, 1900, 100,
AXP806_BLDO3_V_CTRL, AXP806_BLDO3_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO3_MASK),
AXP_DESC(AXP806, BLDO4, "bldo4", "bldoin", 700, 1900, 100,
AXP806_BLDO4_V_CTRL, AXP806_BLDO4_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_BLDO4_MASK),
AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
AXP806_CLDO1_V_CTRL, AXP806_CLDO1_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_CLDO1_MASK),
AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
AXP806_CLDO2_V_CTRL, AXP806_CLDO2_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_CLDO2_MASK),
AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
AXP806_CLDO3_V_CTRL, AXP806_CLDO3_V_CTRL_MASK,
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_CLDO3_MASK),
AXP_DESC_SW(AXP806, SW, "sw", "swin",
AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_SW_MASK),
};
static const struct linear_range axp809_dcdc4_ranges[] = {
REGULATOR_LINEAR_RANGE(600000,
AXP809_DCDC4_600mV_START,
AXP809_DCDC4_600mV_END,
20000),
REGULATOR_LINEAR_RANGE(1800000,
AXP809_DCDC4_1800mV_START,
AXP809_DCDC4_1800mV_END,
100000),
};
static const struct regulator_desc axp809_regulators[] = {
AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
AXP22X_DCDC1_V_OUT, AXP22X_DCDC1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC1_MASK),
AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
AXP22X_DCDC2_V_OUT, AXP22X_DCDC2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC2_MASK),
AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
AXP22X_DCDC3_V_OUT, AXP22X_DCDC3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC3_MASK),
AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4",
axp809_dcdc4_ranges, AXP809_DCDC4_NUM_VOLTAGES,
AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC4_MASK),
AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
AXP22X_DCDC5_V_OUT, AXP22X_DCDC5_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC5_MASK),
/* secondary switchable output of DCDC1 */
AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DC1SW_MASK),
/* LDO regulator internally chained to DCDC5 */
AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
AXP22X_DC5LDO_V_OUT, AXP22X_DC5LDO_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DC5LDO_MASK),
AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ALDO3_MASK),
AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
AXP22X_DLDO1_V_OUT, AXP22X_DLDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
AXP22X_ELDO1_V_OUT, AXP22X_ELDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO1_MASK),
AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
/*
* Note the datasheet only guarantees reliable operation up to
* 3.3V, this needs to be enforced via dts provided constraints
*/
AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
AXP22X_LDO_IO0_V_OUT, AXP22X_LDO_IO0_V_OUT_MASK,
AXP20X_GPIO0_CTRL, AXP20X_GPIO0_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
/*
* Note the datasheet only guarantees reliable operation up to
* 3.3V, this needs to be enforced via dts provided constraints
*/
AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
AXP22X_LDO_IO1_V_OUT, AXP22X_LDO_IO1_V_OUT_MASK,
AXP20X_GPIO1_CTRL, AXP20X_GPIO1_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
AXP_DESC_SW(AXP809, SW, "sw", "swin",
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_SW_MASK),
};
static const struct regulator_desc axp813_regulators[] = {
AXP_DESC(AXP813, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
AXP803_DCDC1_V_OUT, AXP803_DCDC1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC1_MASK),
AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2",
axp803_dcdc234_ranges, AXP803_DCDC234_NUM_VOLTAGES,
AXP803_DCDC2_V_OUT, AXP803_DCDC2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC2_MASK),
AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3",
axp803_dcdc234_ranges, AXP803_DCDC234_NUM_VOLTAGES,
AXP803_DCDC3_V_OUT, AXP803_DCDC3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC3_MASK),
AXP_DESC_RANGES(AXP813, DCDC4, "dcdc4", "vin4",
axp803_dcdc234_ranges, AXP803_DCDC234_NUM_VOLTAGES,
AXP803_DCDC4_V_OUT, AXP803_DCDC4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC4_MASK),
AXP_DESC_RANGES(AXP813, DCDC5, "dcdc5", "vin5",
axp803_dcdc5_ranges, AXP803_DCDC5_NUM_VOLTAGES,
AXP803_DCDC5_V_OUT, AXP803_DCDC5_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC5_MASK),
AXP_DESC_RANGES(AXP813, DCDC6, "dcdc6", "vin6",
axp803_dcdc6_ranges, AXP803_DCDC6_NUM_VOLTAGES,
AXP803_DCDC6_V_OUT, AXP803_DCDC6_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP803_PWR_OUT_DCDC6_MASK),
AXP_DESC_RANGES(AXP813, DCDC7, "dcdc7", "vin7",
axp803_dcdc6_ranges, AXP803_DCDC6_NUM_VOLTAGES,
AXP813_DCDC7_V_OUT, AXP813_DCDC7_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL1, AXP813_PWR_OUT_DCDC7_MASK),
AXP_DESC(AXP813, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO1_MASK),
AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO2_MASK),
AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO3_MASK),
AXP_DESC(AXP813, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
AXP22X_DLDO1_V_OUT, AXP22X_DLDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin",
axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO3_MASK),
AXP_DESC(AXP813, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
AXP22X_DLDO4_V_OUT, AXP22X_DLDO4_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO4_MASK),
AXP_DESC(AXP813, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
AXP22X_ELDO1_V_OUT, AXP22X_ELDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO1_MASK),
AXP_DESC(AXP813, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
/* to do / check ... */
AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
AXP803_FLDO1_V_OUT, AXP803_FLDO1_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP803_PWR_OUT_FLDO1_MASK),
AXP_DESC(AXP813, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
AXP803_FLDO2_V_OUT, AXP803_FLDO2_V_OUT_MASK,
AXP22X_PWR_OUT_CTRL3, AXP803_PWR_OUT_FLDO2_MASK),
/*
* TODO: FLDO3 = {DCDC5, FLDOIN} / 2
*
* This means FLDO3 effectively switches supplies at runtime,
* something the regulator subsystem does not support.
*/
AXP_DESC_FIXED(AXP813, RTC_LDO, "rtc-ldo", "ips", 1800),
AXP_DESC_IO(AXP813, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
AXP22X_LDO_IO0_V_OUT, AXP22X_LDO_IO0_V_OUT_MASK,
AXP20X_GPIO0_CTRL, AXP20X_GPIO0_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_IO(AXP813, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
AXP22X_LDO_IO1_V_OUT, AXP22X_LDO_IO1_V_OUT_MASK,
AXP20X_GPIO1_CTRL, AXP20X_GPIO1_FUNC_MASK,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_SW(AXP813, SW, "sw", "swin",
AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DC1SW_MASK),
};
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
unsigned int reg = AXP20X_DCDC_FREQ;
u32 min, max, def, step;
switch (axp20x->variant) {
case AXP202_ID:
case AXP209_ID:
min = 750;
max = 1875;
def = 1500;
step = 75;
break;
case AXP803_ID:
case AXP813_ID:
/*
* AXP803/AXP813 DCDC work frequency setting has the same
* range and step as AXP22X, but at a different register.
* (See include/linux/mfd/axp20x.h)
*/
reg = AXP803_DCDC_FREQ_CTRL;
fallthrough; /* to the check below */
case AXP806_ID:
/*
* AXP806 also have DCDC work frequency setting register at a
* different position.
*/
if (axp20x->variant == AXP806_ID)
reg = AXP806_DCDC_FREQ_CTRL;
fallthrough;
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
min = 1800;
max = 4050;
def = 3000;
step = 150;
break;
default:
dev_err(&pdev->dev,
"Setting DCDC frequency for unsupported AXP variant\n");
return -EINVAL;
}
if (dcdcfreq == 0)
dcdcfreq = def;
if (dcdcfreq < min) {
dcdcfreq = min;
dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n",
min);
}
if (dcdcfreq > max) {
dcdcfreq = max;
dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n",
max);
}
dcdcfreq = (dcdcfreq - min) / step;
return regmap_update_bits(axp20x->regmap, reg,
AXP20X_FREQ_DCDC_MASK, dcdcfreq);
}
static int axp20x_regulator_parse_dt(struct platform_device *pdev)
{
struct device_node *np, *regulators;
int ret;
u32 dcdcfreq = 0;
np = of_node_get(pdev->dev.parent->of_node);
if (!np)
return 0;
regulators = of_get_child_by_name(np, "regulators");
if (!regulators) {
dev_warn(&pdev->dev, "regulators node not found\n");
} else {
of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
if (ret < 0) {
dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
return ret;
}
of_node_put(regulators);
}
return 0;
}
static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
{
struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
unsigned int reg = AXP20X_DCDC_MODE;
unsigned int mask;
switch (axp20x->variant) {
case AXP202_ID:
case AXP209_ID:
if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
return -EINVAL;
mask = AXP20X_WORKMODE_DCDC2_MASK;
if (id == AXP20X_DCDC3)
mask = AXP20X_WORKMODE_DCDC3_MASK;
workmode <<= ffs(mask) - 1;
break;
case AXP806_ID:
/*
* AXP806 DCDC regulator IDs have the same range as AXP22X.
* (See include/linux/mfd/axp20x.h)
*/
reg = AXP806_DCDC_MODE_CTRL2;
fallthrough; /* to the check below */
case AXP221_ID:
case AXP223_ID:
case AXP809_ID:
if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
return -EINVAL;
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
workmode <<= id - AXP22X_DCDC1;
break;
case AXP803_ID:
if (id < AXP803_DCDC1 || id > AXP803_DCDC6)
return -EINVAL;
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1);
workmode <<= id - AXP803_DCDC1;
break;
case AXP813_ID:
if (id < AXP813_DCDC1 || id > AXP813_DCDC7)
return -EINVAL;
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP813_DCDC1);
workmode <<= id - AXP813_DCDC1;
break;
default:
/* should not happen */
WARN_ON(1);
return -EINVAL;
}
return regmap_update_bits(rdev->regmap, reg, mask, workmode);
}
/*
* This function checks whether a regulator is part of a poly-phase
* output setup based on the registers settings. Returns true if it is.
*/
static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
{
u32 reg = 0;
/*
* Currently in our supported AXP variants, only AXP803, AXP806,
* and AXP813 have polyphase regulators.
*/
switch (axp20x->variant) {
case AXP803_ID:
case AXP813_ID:
regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®);
switch (id) {
case AXP803_DCDC3:
return !!(reg & AXP803_DCDC23_POLYPHASE_DUAL);
case AXP803_DCDC6:
return !!(reg & AXP803_DCDC56_POLYPHASE_DUAL);
}
break;
case AXP806_ID:
regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, ®);
switch (id) {
case AXP806_DCDCB:
return (((reg & AXP806_DCDCABC_POLYPHASE_MASK) ==
AXP806_DCDCAB_POLYPHASE_DUAL) ||
((reg & AXP806_DCDCABC_POLYPHASE_MASK) ==
AXP806_DCDCABC_POLYPHASE_TRI));
case AXP806_DCDCC:
return ((reg & AXP806_DCDCABC_POLYPHASE_MASK) ==
AXP806_DCDCABC_POLYPHASE_TRI);
case AXP806_DCDCE:
return !!(reg & AXP806_DCDCDE_POLYPHASE_DUAL);
}
break;
default:
return false;
}
return false;
}
static int axp20x_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *regulators;
struct regulator_config config = {
.dev = pdev->dev.parent,
.regmap = axp20x->regmap,
.driver_data = axp20x,
};
int ret, i, nregulators;
u32 workmode;
const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
bool drivevbus = false;
switch (axp20x->variant) {
case AXP202_ID:
case AXP209_ID:
regulators = axp20x_regulators;
nregulators = AXP20X_REG_ID_MAX;
break;
case AXP221_ID:
case AXP223_ID:
regulators = axp22x_regulators;
nregulators = AXP22X_REG_ID_MAX;
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
"x-powers,drive-vbus-en");
break;
case AXP803_ID:
regulators = axp803_regulators;
nregulators = AXP803_REG_ID_MAX;
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
"x-powers,drive-vbus-en");
break;
case AXP806_ID:
regulators = axp806_regulators;
nregulators = AXP806_REG_ID_MAX;
break;
case AXP809_ID:
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
break;
case AXP813_ID:
regulators = axp813_regulators;
nregulators = AXP813_REG_ID_MAX;
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
"x-powers,drive-vbus-en");
break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
return -EINVAL;
}
/* This only sets the dcdc freq. Ignore any errors */
axp20x_regulator_parse_dt(pdev);
for (i = 0; i < nregulators; i++) {
const struct regulator_desc *desc = ®ulators[i];
struct regulator_desc *new_desc;
/*
* If this regulator is a slave in a poly-phase setup,
* skip it, as its controls are bound to the master
* regulator and won't work.
*/
if (axp20x_is_polyphase_slave(axp20x, i))
continue;
/* Support for AXP813's FLDO3 is not implemented */
if (axp20x->variant == AXP813_ID && i == AXP813_FLDO3)
continue;
/*
* Regulators DC1SW and DC5LDO are connected internally,
* so we have to handle their supply names separately.
*
* We always register the regulators in proper sequence,
* so the supply names are correctly read. See the last
* part of this loop to see where we save the DT defined
* name.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
(regulators == axp803_regulators && i == AXP803_DC1SW) ||
(regulators == axp809_regulators && i == AXP809_DC1SW)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);
if (!new_desc)
return -ENOMEM;
*new_desc = regulators[i];
new_desc->supply_name = dcdc1_name;
desc = new_desc;
}
if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
(regulators == axp809_regulators && i == AXP809_DC5LDO)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);
if (!new_desc)
return -ENOMEM;
*new_desc = regulators[i];
new_desc->supply_name = dcdc5_name;
desc = new_desc;
}
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %s\n",
regulators[i].name);
return PTR_ERR(rdev);
}
ret = of_property_read_u32(rdev->dev.of_node,
"x-powers,dcdc-workmode",
&workmode);
if (!ret) {
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
rdev->desc->name);
}
/*
* Save AXP22X DCDC1 / DCDC5 regulator names for later.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
(regulators == axp809_regulators && i == AXP809_DCDC1))
of_property_read_string(rdev->dev.of_node,
"regulator-name",
&dcdc1_name);
if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
(regulators == axp809_regulators && i == AXP809_DCDC5))
of_property_read_string(rdev->dev.of_node,
"regulator-name",
&dcdc5_name);
}
if (drivevbus) {
/* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
AXP22X_MISC_N_VBUSEN_FUNC, 0);
rdev = devm_regulator_register(&pdev->dev,
&axp22x_drivevbus_regulator,
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register drivevbus\n");
return PTR_ERR(rdev);
}
}
return 0;
}
static struct platform_driver axp20x_regulator_driver = {
.probe = axp20x_regulator_probe,
.driver = {
.name = "axp20x-regulator",
},
};
module_platform_driver(axp20x_regulator_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
MODULE_ALIAS("platform:axp20x-regulator");