swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 2ef96a5bb12be62ef75b5828c0aab838ebb29cb8 authored by Linus Torvalds on 10 May 2020, 22:16:58 UTC
Linux 5.7-rc5
Linux 5.7-rc5
Tip revision: 2ef96a5
aspeed-p2a-ctrl.c
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 Google Inc
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Provides a simple driver to control the ASPEED P2A interface which allows
* the host to read and write to various regions of the BMC's memory.
*/
#include <linux/fs.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/aspeed-p2a-ctrl.h>
#define DEVICE_NAME "aspeed-p2a-ctrl"
/* SCU2C is a Misc. Control Register. */
#define SCU2C 0x2c
/* SCU180 is the PCIe Configuration Setting Control Register. */
#define SCU180 0x180
/* Bit 1 controls the P2A bridge, while bit 0 controls the entire VGA device
* on the PCI bus.
*/
#define SCU180_ENP2A BIT(1)
/* The ast2400/2500 both have six ranges. */
#define P2A_REGION_COUNT 6
struct region {
u64 min;
u64 max;
u32 bit;
};
struct aspeed_p2a_model_data {
/* min, max, bit */
struct region regions[P2A_REGION_COUNT];
};
struct aspeed_p2a_ctrl {
struct miscdevice miscdev;
struct regmap *regmap;
const struct aspeed_p2a_model_data *config;
/* Access to these needs to be locked, held via probe, mapping ioctl,
* and release, remove.
*/
struct mutex tracking;
u32 readers;
u32 readerwriters[P2A_REGION_COUNT];
phys_addr_t mem_base;
resource_size_t mem_size;
};
struct aspeed_p2a_user {
struct file *file;
struct aspeed_p2a_ctrl *parent;
/* The entire memory space is opened for reading once the bridge is
* enabled, therefore this needs only to be tracked once per user.
* If any user has it open for read, the bridge must stay enabled.
*/
u32 read;
/* Each entry of the array corresponds to a P2A Region. If the user
* opens for read or readwrite, the reference goes up here. On
* release, this array is walked and references adjusted accordingly.
*/
u32 readwrite[P2A_REGION_COUNT];
};
static void aspeed_p2a_enable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
{
regmap_update_bits(p2a_ctrl->regmap,
SCU180, SCU180_ENP2A, SCU180_ENP2A);
}
static void aspeed_p2a_disable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
{
regmap_update_bits(p2a_ctrl->regmap, SCU180, SCU180_ENP2A, 0);
}
static int aspeed_p2a_mmap(struct file *file, struct vm_area_struct *vma)
{
unsigned long vsize;
pgprot_t prot;
struct aspeed_p2a_user *priv = file->private_data;
struct aspeed_p2a_ctrl *ctrl = priv->parent;
if (ctrl->mem_base == 0 && ctrl->mem_size == 0)
return -EINVAL;
vsize = vma->vm_end - vma->vm_start;
prot = vma->vm_page_prot;
if (vma->vm_pgoff + vsize > ctrl->mem_base + ctrl->mem_size)
return -EINVAL;
/* ast2400/2500 AHB accesses are not cache coherent */
prot = pgprot_noncached(prot);
if (remap_pfn_range(vma, vma->vm_start,
(ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
vsize, prot))
return -EAGAIN;
return 0;
}
static bool aspeed_p2a_region_acquire(struct aspeed_p2a_user *priv,
struct aspeed_p2a_ctrl *ctrl,
struct aspeed_p2a_ctrl_mapping *map)
{
int i;
u64 base, end;
bool matched = false;
base = map->addr;
end = map->addr + (map->length - 1);
/* If the value is a legal u32, it will find a match. */
for (i = 0; i < P2A_REGION_COUNT; i++) {
const struct region *curr = &ctrl->config->regions[i];
/* If the top of this region is lower than your base, skip it.
*/
if (curr->max < base)
continue;
/* If the bottom of this region is higher than your end, bail.
*/
if (curr->min > end)
break;
/* Lock this and update it, therefore it someone else is
* closing their file out, this'll preserve the increment.
*/
mutex_lock(&ctrl->tracking);
ctrl->readerwriters[i] += 1;
mutex_unlock(&ctrl->tracking);
/* Track with the user, so when they close their file, we can
* decrement properly.
*/
priv->readwrite[i] += 1;
/* Enable the region as read-write. */
regmap_update_bits(ctrl->regmap, SCU2C, curr->bit, 0);
matched = true;
}
return matched;
}
static long aspeed_p2a_ioctl(struct file *file, unsigned int cmd,
unsigned long data)
{
struct aspeed_p2a_user *priv = file->private_data;
struct aspeed_p2a_ctrl *ctrl = priv->parent;
void __user *arg = (void __user *)data;
struct aspeed_p2a_ctrl_mapping map;
if (copy_from_user(&map, arg, sizeof(map)))
return -EFAULT;
switch (cmd) {
case ASPEED_P2A_CTRL_IOCTL_SET_WINDOW:
/* If they want a region to be read-only, since the entire
* region is read-only once enabled, we just need to track this
* user wants to read from the bridge, and if it's not enabled.
* Enable it.
*/
if (map.flags == ASPEED_P2A_CTRL_READ_ONLY) {
mutex_lock(&ctrl->tracking);
ctrl->readers += 1;
mutex_unlock(&ctrl->tracking);
/* Track with the user, so when they close their file,
* we can decrement properly.
*/
priv->read += 1;
} else if (map.flags == ASPEED_P2A_CTRL_READWRITE) {
/* If we don't acquire any region return error. */
if (!aspeed_p2a_region_acquire(priv, ctrl, &map)) {
return -EINVAL;
}
} else {
/* Invalid map flags. */
return -EINVAL;
}
aspeed_p2a_enable_bridge(ctrl);
return 0;
case ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG:
/* This is a request for the memory-region and corresponding
* length that is used by the driver for mmap.
*/
map.flags = 0;
map.addr = ctrl->mem_base;
map.length = ctrl->mem_size;
return copy_to_user(arg, &map, sizeof(map)) ? -EFAULT : 0;
}
return -EINVAL;
}
/*
* When a user opens this file, we create a structure to track their mappings.
*
* A user can map a region as read-only (bridge enabled), or read-write (bit
* flipped, and bridge enabled). Either way, this tracking is used, s.t. when
* they release the device references are handled.
*
* The bridge is not enabled until a user calls an ioctl to map a region,
* simply opening the device does not enable it.
*/
static int aspeed_p2a_open(struct inode *inode, struct file *file)
{
struct aspeed_p2a_user *priv;
priv = kmalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->file = file;
priv->read = 0;
memset(priv->readwrite, 0, sizeof(priv->readwrite));
/* The file's private_data is initialized to the p2a_ctrl. */
priv->parent = file->private_data;
/* Set the file's private_data to the user's data. */
file->private_data = priv;
return 0;
}
/*
* This will close the users mappings. It will go through what they had opened
* for readwrite, and decrement those counts. If at the end, this is the last
* user, it'll close the bridge.
*/
static int aspeed_p2a_release(struct inode *inode, struct file *file)
{
int i;
u32 bits = 0;
bool open_regions = false;
struct aspeed_p2a_user *priv = file->private_data;
/* Lock others from changing these values until everything is updated
* in one pass.
*/
mutex_lock(&priv->parent->tracking);
priv->parent->readers -= priv->read;
for (i = 0; i < P2A_REGION_COUNT; i++) {
priv->parent->readerwriters[i] -= priv->readwrite[i];
if (priv->parent->readerwriters[i] > 0)
open_regions = true;
else
bits |= priv->parent->config->regions[i].bit;
}
/* Setting a bit to 1 disables the region, so let's just OR with the
* above to disable any.
*/
/* Note, if another user is trying to ioctl, they can't grab tracking,
* and therefore can't grab either register mutex.
* If another user is trying to close, they can't grab tracking either.
*/
regmap_update_bits(priv->parent->regmap, SCU2C, bits, bits);
/* If parent->readers is zero and open windows is 0, disable the
* bridge.
*/
if (!open_regions && priv->parent->readers == 0)
aspeed_p2a_disable_bridge(priv->parent);
mutex_unlock(&priv->parent->tracking);
kfree(priv);
return 0;
}
static const struct file_operations aspeed_p2a_ctrl_fops = {
.owner = THIS_MODULE,
.mmap = aspeed_p2a_mmap,
.unlocked_ioctl = aspeed_p2a_ioctl,
.open = aspeed_p2a_open,
.release = aspeed_p2a_release,
};
/* The regions are controlled by SCU2C */
static void aspeed_p2a_disable_all(struct aspeed_p2a_ctrl *p2a_ctrl)
{
int i;
u32 value = 0;
for (i = 0; i < P2A_REGION_COUNT; i++)
value |= p2a_ctrl->config->regions[i].bit;
regmap_update_bits(p2a_ctrl->regmap, SCU2C, value, value);
/* Disable the bridge. */
aspeed_p2a_disable_bridge(p2a_ctrl);
}
static int aspeed_p2a_ctrl_probe(struct platform_device *pdev)
{
struct aspeed_p2a_ctrl *misc_ctrl;
struct device *dev;
struct resource resm;
struct device_node *node;
int rc = 0;
dev = &pdev->dev;
misc_ctrl = devm_kzalloc(dev, sizeof(*misc_ctrl), GFP_KERNEL);
if (!misc_ctrl)
return -ENOMEM;
mutex_init(&misc_ctrl->tracking);
/* optional. */
node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (node) {
rc = of_address_to_resource(node, 0, &resm);
of_node_put(node);
if (rc) {
dev_err(dev, "Couldn't address to resource for reserved memory\n");
return -ENODEV;
}
misc_ctrl->mem_size = resource_size(&resm);
misc_ctrl->mem_base = resm.start;
}
misc_ctrl->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node);
if (IS_ERR(misc_ctrl->regmap)) {
dev_err(dev, "Couldn't get regmap\n");
return -ENODEV;
}
misc_ctrl->config = of_device_get_match_data(dev);
dev_set_drvdata(&pdev->dev, misc_ctrl);
aspeed_p2a_disable_all(misc_ctrl);
misc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
misc_ctrl->miscdev.name = DEVICE_NAME;
misc_ctrl->miscdev.fops = &aspeed_p2a_ctrl_fops;
misc_ctrl->miscdev.parent = dev;
rc = misc_register(&misc_ctrl->miscdev);
if (rc)
dev_err(dev, "Unable to register device\n");
return rc;
}
static int aspeed_p2a_ctrl_remove(struct platform_device *pdev)
{
struct aspeed_p2a_ctrl *p2a_ctrl = dev_get_drvdata(&pdev->dev);
misc_deregister(&p2a_ctrl->miscdev);
return 0;
}
#define SCU2C_DRAM BIT(25)
#define SCU2C_SPI BIT(24)
#define SCU2C_SOC BIT(23)
#define SCU2C_FLASH BIT(22)
static const struct aspeed_p2a_model_data ast2400_model_data = {
.regions = {
{0x00000000, 0x17FFFFFF, SCU2C_FLASH},
{0x18000000, 0x1FFFFFFF, SCU2C_SOC},
{0x20000000, 0x2FFFFFFF, SCU2C_FLASH},
{0x30000000, 0x3FFFFFFF, SCU2C_SPI},
{0x40000000, 0x5FFFFFFF, SCU2C_DRAM},
{0x60000000, 0xFFFFFFFF, SCU2C_SOC},
}
};
static const struct aspeed_p2a_model_data ast2500_model_data = {
.regions = {
{0x00000000, 0x0FFFFFFF, SCU2C_FLASH},
{0x10000000, 0x1FFFFFFF, SCU2C_SOC},
{0x20000000, 0x3FFFFFFF, SCU2C_FLASH},
{0x40000000, 0x5FFFFFFF, SCU2C_SOC},
{0x60000000, 0x7FFFFFFF, SCU2C_SPI},
{0x80000000, 0xFFFFFFFF, SCU2C_DRAM},
}
};
static const struct of_device_id aspeed_p2a_ctrl_match[] = {
{ .compatible = "aspeed,ast2400-p2a-ctrl",
.data = &ast2400_model_data },
{ .compatible = "aspeed,ast2500-p2a-ctrl",
.data = &ast2500_model_data },
{ },
};
static struct platform_driver aspeed_p2a_ctrl_driver = {
.driver = {
.name = DEVICE_NAME,
.of_match_table = aspeed_p2a_ctrl_match,
},
.probe = aspeed_p2a_ctrl_probe,
.remove = aspeed_p2a_ctrl_remove,
};
module_platform_driver(aspeed_p2a_ctrl_driver);
MODULE_DEVICE_TABLE(of, aspeed_p2a_ctrl_match);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Patrick Venture <venture@google.com>");
MODULE_DESCRIPTION("Control for aspeed 2400/2500 P2A VGA HOST to BMC mappings");