swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 11da3a7f84f19c26da6f86af878298694ede0804 authored by Linus Torvalds on 10 September 2018, 00:26:43 UTC
Linux 4.19-rc3
Linux 4.19-rc3
Tip revision: 11da3a7
pm33xx.c
// SPDX-License-Identifier: GPL-2.0
/*
* AM33XX Power Management Routines
*
* Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
* Vaibhav Bedia, Dave Gerlach
*/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/genalloc.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_data/pm33xx.h>
#include <linux/platform_device.h>
#include <linux/sizes.h>
#include <linux/sram.h>
#include <linux/suspend.h>
#include <linux/ti-emif-sram.h>
#include <linux/wkup_m3_ipc.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
#define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
(unsigned long)pm_sram->do_wfi)
static int (*am33xx_do_wfi_sram)(unsigned long unused);
static phys_addr_t am33xx_do_wfi_sram_phys;
static struct gen_pool *sram_pool, *sram_pool_data;
static unsigned long ocmcram_location, ocmcram_location_data;
static struct am33xx_pm_platform_data *pm_ops;
static struct am33xx_pm_sram_addr *pm_sram;
static struct device *pm33xx_dev;
static struct wkup_m3_ipc *m3_ipc;
static unsigned long suspend_wfi_flags;
static u32 sram_suspend_address(unsigned long addr)
{
return ((unsigned long)am33xx_do_wfi_sram +
AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
}
#ifdef CONFIG_SUSPEND
static int am33xx_pm_suspend(suspend_state_t suspend_state)
{
int i, ret = 0;
ret = pm_ops->soc_suspend((unsigned long)suspend_state,
am33xx_do_wfi_sram, suspend_wfi_flags);
if (ret) {
dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
} else {
i = m3_ipc->ops->request_pm_status(m3_ipc);
switch (i) {
case 0:
dev_info(pm33xx_dev,
"PM: Successfully put all powerdomains to target state\n");
break;
case 1:
dev_err(pm33xx_dev,
"PM: Could not transition all powerdomains to target state\n");
ret = -1;
break;
default:
dev_err(pm33xx_dev,
"PM: CM3 returned unknown result = %d\n", i);
ret = -1;
}
}
return ret;
}
static int am33xx_pm_enter(suspend_state_t suspend_state)
{
int ret = 0;
switch (suspend_state) {
case PM_SUSPEND_MEM:
case PM_SUSPEND_STANDBY:
ret = am33xx_pm_suspend(suspend_state);
break;
default:
ret = -EINVAL;
}
return ret;
}
static int am33xx_pm_begin(suspend_state_t state)
{
int ret = -EINVAL;
switch (state) {
case PM_SUSPEND_MEM:
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
break;
case PM_SUSPEND_STANDBY:
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
break;
}
return ret;
}
static void am33xx_pm_end(void)
{
m3_ipc->ops->finish_low_power(m3_ipc);
}
static int am33xx_pm_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
return 1;
default:
return 0;
}
}
static const struct platform_suspend_ops am33xx_pm_ops = {
.begin = am33xx_pm_begin,
.end = am33xx_pm_end,
.enter = am33xx_pm_enter,
.valid = am33xx_pm_valid,
};
#endif /* CONFIG_SUSPEND */
static void am33xx_pm_set_ipc_ops(void)
{
u32 resume_address;
int temp;
temp = ti_emif_get_mem_type();
if (temp < 0) {
dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
return;
}
m3_ipc->ops->set_mem_type(m3_ipc, temp);
/* Physical resume address to be used by ROM code */
resume_address = am33xx_do_wfi_sram_phys +
*pm_sram->resume_offset + 0x4;
m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
}
static void am33xx_pm_free_sram(void)
{
gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
gen_pool_free(sram_pool_data, ocmcram_location_data,
sizeof(struct am33xx_pm_ro_sram_data));
}
/*
* Push the minimal suspend-resume code to SRAM
*/
static int am33xx_pm_alloc_sram(void)
{
struct device_node *np;
int ret = 0;
np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
if (!np) {
np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
if (!np) {
dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
__func__);
return -ENODEV;
}
}
sram_pool = of_gen_pool_get(np, "pm-sram", 0);
if (!sram_pool) {
dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
__func__);
ret = -ENODEV;
goto mpu_put_node;
}
sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
if (!sram_pool_data) {
dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
__func__);
ret = -ENODEV;
goto mpu_put_node;
}
ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
if (!ocmcram_location) {
dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
__func__);
ret = -ENOMEM;
goto mpu_put_node;
}
ocmcram_location_data = gen_pool_alloc(sram_pool_data,
sizeof(struct emif_regs_amx3));
if (!ocmcram_location_data) {
dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
ret = -ENOMEM;
}
mpu_put_node:
of_node_put(np);
return ret;
}
static int am33xx_push_sram_idle(void)
{
struct am33xx_pm_ro_sram_data ro_sram_data;
int ret;
u32 table_addr, ro_data_addr;
void *copy_addr;
ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
ro_sram_data.amx3_pm_sram_data_phys =
gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr();
/* Save physical address to calculate resume offset during pm init */
am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
ocmcram_location);
am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
pm_sram->do_wfi,
*pm_sram->do_wfi_sz);
if (!am33xx_do_wfi_sram) {
dev_err(pm33xx_dev,
"PM: %s: am33xx_do_wfi copy to sram failed\n",
__func__);
return -ENODEV;
}
table_addr =
sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
if (ret) {
dev_dbg(pm33xx_dev,
"PM: %s: EMIF function copy failed\n", __func__);
return -EPROBE_DEFER;
}
ro_data_addr =
sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
&ro_sram_data,
sizeof(ro_sram_data));
if (!copy_addr) {
dev_err(pm33xx_dev,
"PM: %s: ro_sram_data copy to sram failed\n",
__func__);
return -ENODEV;
}
return 0;
}
static int am33xx_pm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int ret;
if (!of_machine_is_compatible("ti,am33xx") &&
!of_machine_is_compatible("ti,am43"))
return -ENODEV;
pm_ops = dev->platform_data;
if (!pm_ops) {
dev_err(dev, "PM: Cannot get core PM ops!\n");
return -ENODEV;
}
pm_sram = pm_ops->get_sram_addrs();
if (!pm_sram) {
dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
return -ENODEV;
}
pm33xx_dev = dev;
ret = am33xx_pm_alloc_sram();
if (ret)
return ret;
ret = am33xx_push_sram_idle();
if (ret)
goto err_free_sram;
m3_ipc = wkup_m3_ipc_get();
if (!m3_ipc) {
dev_dbg(dev, "PM: Cannot get wkup_m3_ipc handle\n");
ret = -EPROBE_DEFER;
goto err_free_sram;
}
am33xx_pm_set_ipc_ops();
#ifdef CONFIG_SUSPEND
suspend_set_ops(&am33xx_pm_ops);
#endif /* CONFIG_SUSPEND */
/*
* For a system suspend we must flush the caches, we want
* the DDR in self-refresh, we want to save the context
* of the EMIF, and we want the wkup_m3 to handle low-power
* transition.
*/
suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE;
suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH;
suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF;
suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
ret = pm_ops->init();
if (ret) {
dev_err(dev, "Unable to call core pm init!\n");
ret = -ENODEV;
goto err_put_wkup_m3_ipc;
}
return 0;
err_put_wkup_m3_ipc:
wkup_m3_ipc_put(m3_ipc);
err_free_sram:
am33xx_pm_free_sram();
pm33xx_dev = NULL;
return ret;
}
static int am33xx_pm_remove(struct platform_device *pdev)
{
suspend_set_ops(NULL);
wkup_m3_ipc_put(m3_ipc);
am33xx_pm_free_sram();
return 0;
}
static struct platform_driver am33xx_pm_driver = {
.driver = {
.name = "pm33xx",
},
.probe = am33xx_pm_probe,
.remove = am33xx_pm_remove,
};
module_platform_driver(am33xx_pm_driver);
MODULE_ALIAS("platform:pm33xx");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("am33xx power management driver");