swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 1c7fc5cbc33980acd13d668f1c8f0313d6ae9fd8 authored by Linus Torvalds on 13 January 2019, 22:41:12 UTC
Linux 5.0-rc2
Linux 5.0-rc2
Tip revision: 1c7fc5c
Kconfig
#
# USB/ATM DSL configuration
#
menuconfig USB_ATM
tristate "USB DSL modem support"
depends on ATM
select CRC32
default n
help
Say Y here if you want to connect a USB Digital Subscriber Line (DSL)
modem to your computer's USB port. You will then need to choose your
modem from the list below.
To compile this driver as a module, choose M here: the
module will be called usbatm.
if USB_ATM
config USB_SPEEDTOUCH
tristate "Speedtouch USB support"
select FW_LOADER
help
Say Y here if you have an SpeedTouch USB or SpeedTouch 330
modem. In order to use your modem you will need to install the
two parts of the firmware, extracted by the user space tools; see
<http://www.linux-usb.org/SpeedTouch/> for details.
To compile this driver as a module, choose M here: the
module will be called speedtch.
config USB_CXACRU
tristate "Conexant AccessRunner USB support"
select FW_LOADER
help
Say Y here if you have an ADSL USB modem based on the Conexant
AccessRunner chipset. In order to use your modem you will need to
install the firmware, extracted by the user space tools; see
<http://accessrunner.sourceforge.net/> for details.
To compile this driver as a module, choose M here: the
module will be called cxacru.
config USB_UEAGLEATM
tristate "ADI 930 and eagle USB DSL modem"
select FW_LOADER
help
Say Y here if you have an ADSL USB modem based on the ADI 930
or eagle chipset. In order to use your modem you will need to
install firmwares and CMV (Command Management Variables); see
<https://gna.org/projects/ueagleatm/> for details.
To compile this driver as a module, choose M here: the
module will be called ueagle-atm.
config USB_XUSBATM
tristate "Other USB DSL modem support"
help
Say Y here if you have a DSL USB modem not explicitly supported by
another USB DSL drivers. In order to use your modem you will need to
pass the vendor ID, product ID, and endpoint numbers for transmission
and reception as module parameters. You may need to initialize
the modem using a user space utility (a firmware loader for example).
To compile this driver as a module, choose M here: the
module will be called xusbatm.
endif # USB_ATM