swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 485802a6c524e62b5924849dd727ddbb1497cc71 authored by Linus Torvalds on 17 June 2012, 00:25:17 UTC
Linux 3.5-rc3
Linux 3.5-rc3
Tip revision: 485802a
ohci-sa1111.c
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* SA1111 Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Russell King et al.
*
* This file is licenced under the GPL.
*/
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/assabet.h>
#include <asm/hardware/sa1111.h>
#ifndef CONFIG_SA1111
#error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined."
#endif
#define USB_STATUS 0x0118
#define USB_RESET 0x011c
#define USB_IRQTEST 0x0120
#define USB_RESET_FORCEIFRESET (1 << 0)
#define USB_RESET_FORCEHCRESET (1 << 1)
#define USB_RESET_CLKGENRESET (1 << 2)
#define USB_RESET_SIMSCALEDOWN (1 << 3)
#define USB_RESET_USBINTTEST (1 << 4)
#define USB_RESET_SLEEPSTBYEN (1 << 5)
#define USB_RESET_PWRSENSELOW (1 << 6)
#define USB_RESET_PWRCTRLLOW (1 << 7)
#define USB_STATUS_IRQHCIRMTWKUP (1 << 7)
#define USB_STATUS_IRQHCIBUFFACC (1 << 8)
#define USB_STATUS_NIRQHCIM (1 << 9)
#define USB_STATUS_NHCIMFCLR (1 << 10)
#define USB_STATUS_USBPWRSENSE (1 << 11)
#if 0
static void dump_hci_status(struct usb_hcd *hcd, const char *label)
{
unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
}
#endif
static int ohci_sa1111_reset(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
return ohci_init(ohci);
}
static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
ret = ohci_run(ohci);
if (ret < 0) {
ohci_err(ohci, "can't start\n");
ohci_stop(hcd);
}
return ret;
}
static const struct hc_driver ohci_sa1111_hc_driver = {
.description = hcd_name,
.product_desc = "SA-1111 OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
/*
* basic lifecycle operations
*/
.reset = ohci_sa1111_reset,
.start = ohci_sa1111_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
static int sa1111_start_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst = 0;
int ret;
dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
if (machine_is_xp860() ||
machine_has_neponset() ||
machine_is_pfs168() ||
machine_is_badge4())
usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
/*
* Configure the power sense and control lines. Place the USB
* host controller in reset.
*/
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
dev->mapbase + USB_RESET);
/*
* Now, carefully enable the USB clock, and take
* the USB host controller out of reset.
*/
ret = sa1111_enable_device(dev);
if (ret == 0) {
udelay(11);
sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
}
return ret;
}
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
/*
* Put the USB host controller into reset.
*/
usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
dev->mapbase + USB_RESET);
/*
* Stop the USB clock.
*/
sa1111_disable_device(dev);
}
/**
* ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it.
*/
static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
{
struct usb_hcd *hcd;
int ret;
if (usb_disabled())
return -ENODEV;
hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = dev->res.start;
hcd->rsrc_len = resource_size(&dev->res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dev_dbg(&dev->dev, "request_mem_region failed\n");
ret = -EBUSY;
goto err1;
}
hcd->regs = dev->mapbase;
ret = sa1111_start_hc(dev);
if (ret)
goto err2;
ret = usb_add_hcd(hcd, dev->irq[1], 0);
if (ret == 0)
return ret;
sa1111_stop_hc(dev);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return ret;
}
/**
* ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
* @dev: USB Host Controller being removed
*
* Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
* the HCD's stop() method.
*/
static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
{
struct usb_hcd *hcd = sa1111_get_drvdata(dev);
usb_remove_hcd(hcd);
sa1111_stop_hc(dev);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
return 0;
}
static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
{
struct usb_hcd *hcd = sa1111_get_drvdata(dev);
if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
hcd->driver->shutdown(hcd);
sa1111_stop_hc(dev);
}
}
static struct sa1111_driver ohci_hcd_sa1111_driver = {
.drv = {
.name = "sa1111-ohci",
.owner = THIS_MODULE,
},
.devid = SA1111_DEVID_USB,
.probe = ohci_hcd_sa1111_probe,
.remove = ohci_hcd_sa1111_remove,
.shutdown = ohci_hcd_sa1111_shutdown,
};