swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 18e352e4a73465349711a9324767e1b2453383e2 authored by Linus Torvalds on 28 January 2009, 18:49:30 UTC
Linux 2.6.29-rc3
Linux 2.6.29-rc3
Tip revision: 18e352e
r8a66597.h
/*
* R8A66597 HCD (Host Controller Driver)
*
* Copyright (C) 2006-2007 Renesas Solutions Corp.
* Portions Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
* Portions Copyright (C) 2004-2005 David Brownell
* Portions Copyright (C) 1999 Roman Weissgaerber
*
* Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef __R8A66597_H__
#define __R8A66597_H__
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
#include <linux/clk.h>
#endif
#define SYSCFG0 0x00
#define SYSCFG1 0x02
#define SYSSTS0 0x04
#define SYSSTS1 0x06
#define DVSTCTR0 0x08
#define DVSTCTR1 0x0A
#define TESTMODE 0x0C
#define PINCFG 0x0E
#define DMA0CFG 0x10
#define DMA1CFG 0x12
#define CFIFO 0x14
#define D0FIFO 0x18
#define D1FIFO 0x1C
#define CFIFOSEL 0x20
#define CFIFOCTR 0x22
#define CFIFOSIE 0x24
#define D0FIFOSEL 0x28
#define D0FIFOCTR 0x2A
#define D1FIFOSEL 0x2C
#define D1FIFOCTR 0x2E
#define INTENB0 0x30
#define INTENB1 0x32
#define INTENB2 0x34
#define BRDYENB 0x36
#define NRDYENB 0x38
#define BEMPENB 0x3A
#define SOFCFG 0x3C
#define INTSTS0 0x40
#define INTSTS1 0x42
#define INTSTS2 0x44
#define BRDYSTS 0x46
#define NRDYSTS 0x48
#define BEMPSTS 0x4A
#define FRMNUM 0x4C
#define UFRMNUM 0x4E
#define USBADDR 0x50
#define USBREQ 0x54
#define USBVAL 0x56
#define USBINDX 0x58
#define USBLENG 0x5A
#define DCPCFG 0x5C
#define DCPMAXP 0x5E
#define DCPCTR 0x60
#define PIPESEL 0x64
#define PIPECFG 0x68
#define PIPEBUF 0x6A
#define PIPEMAXP 0x6C
#define PIPEPERI 0x6E
#define PIPE1CTR 0x70
#define PIPE2CTR 0x72
#define PIPE3CTR 0x74
#define PIPE4CTR 0x76
#define PIPE5CTR 0x78
#define PIPE6CTR 0x7A
#define PIPE7CTR 0x7C
#define PIPE8CTR 0x7E
#define PIPE9CTR 0x80
#define PIPE1TRE 0x90
#define PIPE1TRN 0x92
#define PIPE2TRE 0x94
#define PIPE2TRN 0x96
#define PIPE3TRE 0x98
#define PIPE3TRN 0x9A
#define PIPE4TRE 0x9C
#define PIPE4TRN 0x9E
#define PIPE5TRE 0xA0
#define PIPE5TRN 0xA2
#define DEVADD0 0xD0
#define DEVADD1 0xD2
#define DEVADD2 0xD4
#define DEVADD3 0xD6
#define DEVADD4 0xD8
#define DEVADD5 0xDA
#define DEVADD6 0xDC
#define DEVADD7 0xDE
#define DEVADD8 0xE0
#define DEVADD9 0xE2
#define DEVADDA 0xE4
/* System Configuration Control Register */
#define XTAL 0xC000 /* b15-14: Crystal selection */
#define XTAL48 0x8000 /* 48MHz */
#define XTAL24 0x4000 /* 24MHz */
#define XTAL12 0x0000 /* 12MHz */
#define XCKE 0x2000 /* b13: External clock enable */
#define PLLC 0x0800 /* b11: PLL control */
#define SCKE 0x0400 /* b10: USB clock enable */
#define PCSDIS 0x0200 /* b9: not CS wakeup */
#define LPSME 0x0100 /* b8: Low power sleep mode */
#define HSE 0x0080 /* b7: Hi-speed enable */
#define DCFM 0x0040 /* b6: Controller function select */
#define DRPD 0x0020 /* b5: D+/- pull down control */
#define DPRPU 0x0010 /* b4: D+ pull up control */
#define USBE 0x0001 /* b0: USB module operation enable */
/* System Configuration Status Register */
#define OVCBIT 0x8000 /* b15-14: Over-current bit */
#define OVCMON 0xC000 /* b15-14: Over-current monitor */
#define SOFEA 0x0020 /* b5: SOF monitor */
#define IDMON 0x0004 /* b3: ID-pin monitor */
#define LNST 0x0003 /* b1-0: D+, D- line status */
#define SE1 0x0003 /* SE1 */
#define FS_KSTS 0x0002 /* Full-Speed K State */
#define FS_JSTS 0x0001 /* Full-Speed J State */
#define LS_JSTS 0x0002 /* Low-Speed J State */
#define LS_KSTS 0x0001 /* Low-Speed K State */
#define SE0 0x0000 /* SE0 */
/* Device State Control Register */
#define EXTLP0 0x0400 /* b10: External port */
#define VBOUT 0x0200 /* b9: VBUS output */
#define WKUP 0x0100 /* b8: Remote wakeup */
#define RWUPE 0x0080 /* b7: Remote wakeup sense */
#define USBRST 0x0040 /* b6: USB reset enable */
#define RESUME 0x0020 /* b5: Resume enable */
#define UACT 0x0010 /* b4: USB bus enable */
#define RHST 0x0007 /* b1-0: Reset handshake status */
#define HSPROC 0x0004 /* HS handshake is processing */
#define HSMODE 0x0003 /* Hi-Speed mode */
#define FSMODE 0x0002 /* Full-Speed mode */
#define LSMODE 0x0001 /* Low-Speed mode */
#define UNDECID 0x0000 /* Undecided */
/* Test Mode Register */
#define UTST 0x000F /* b3-0: Test select */
#define H_TST_PACKET 0x000C /* HOST TEST Packet */
#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
#define H_TST_K 0x000A /* HOST TEST K */
#define H_TST_J 0x0009 /* HOST TEST J */
#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */
#define P_TST_PACKET 0x0004 /* PERI TEST Packet */
#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
#define P_TST_K 0x0002 /* PERI TEST K */
#define P_TST_J 0x0001 /* PERI TEST J */
#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */
/* Data Pin Configuration Register */
#define LDRV 0x8000 /* b15: Drive Current Adjust */
#define VIF1 0x0000 /* VIF = 1.8V */
#define VIF3 0x8000 /* VIF = 3.3V */
#define INTA 0x0001 /* b1: USB INT-pin active */
/* DMAx Pin Configuration Register */
#define DREQA 0x4000 /* b14: Dreq active select */
#define BURST 0x2000 /* b13: Burst mode */
#define DACKA 0x0400 /* b10: Dack active select */
#define DFORM 0x0380 /* b9-7: DMA mode select */
#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
#define DENDA 0x0040 /* b6: Dend active select */
#define PKTM 0x0020 /* b5: Packet mode */
#define DENDE 0x0010 /* b4: Dend enable */
#define OBUS 0x0004 /* b2: OUTbus mode */
/* CFIFO/DxFIFO Port Select Register */
#define RCNT 0x8000 /* b15: Read count mode */
#define REW 0x4000 /* b14: Buffer rewind */
#define DCLRM 0x2000 /* b13: DMA buffer clear mode */
#define DREQE 0x1000 /* b12: DREQ output enable */
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
#define MBW 0x0800
#else
#define MBW 0x0400 /* b10: Maximum bit width for FIFO access */
#endif
#define MBW_8 0x0000 /* 8bit */
#define MBW_16 0x0400 /* 16bit */
#define BIGEND 0x0100 /* b8: Big endian mode */
#define BYTE_LITTLE 0x0000 /* little dendian */
#define BYTE_BIG 0x0100 /* big endifan */
#define ISEL 0x0020 /* b5: DCP FIFO port direction select */
#define CURPIPE 0x000F /* b2-0: PIPE select */
/* CFIFO/DxFIFO Port Control Register */
#define BVAL 0x8000 /* b15: Buffer valid flag */
#define BCLR 0x4000 /* b14: Buffer clear */
#define FRDY 0x2000 /* b13: FIFO ready */
#define DTLN 0x0FFF /* b11-0: FIFO received data length */
/* Interrupt Enable Register 0 */
#define VBSE 0x8000 /* b15: VBUS interrupt */
#define RSME 0x4000 /* b14: Resume interrupt */
#define SOFE 0x2000 /* b13: Frame update interrupt */
#define DVSE 0x1000 /* b12: Device state transition interrupt */
#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
/* Interrupt Enable Register 1 */
#define OVRCRE 0x8000 /* b15: Over-current interrupt */
#define BCHGE 0x4000 /* b14: USB us chenge interrupt */
#define DTCHE 0x1000 /* b12: Detach sense interrupt */
#define ATTCHE 0x0800 /* b11: Attach sense interrupt */
#define EOFERRE 0x0040 /* b6: EOF error interrupt */
#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
#define SACKE 0x0010 /* b4: SETUP ACK interrupt */
/* BRDY Interrupt Enable/Status Register */
#define BRDY9 0x0200 /* b9: PIPE9 */
#define BRDY8 0x0100 /* b8: PIPE8 */
#define BRDY7 0x0080 /* b7: PIPE7 */
#define BRDY6 0x0040 /* b6: PIPE6 */
#define BRDY5 0x0020 /* b5: PIPE5 */
#define BRDY4 0x0010 /* b4: PIPE4 */
#define BRDY3 0x0008 /* b3: PIPE3 */
#define BRDY2 0x0004 /* b2: PIPE2 */
#define BRDY1 0x0002 /* b1: PIPE1 */
#define BRDY0 0x0001 /* b1: PIPE0 */
/* NRDY Interrupt Enable/Status Register */
#define NRDY9 0x0200 /* b9: PIPE9 */
#define NRDY8 0x0100 /* b8: PIPE8 */
#define NRDY7 0x0080 /* b7: PIPE7 */
#define NRDY6 0x0040 /* b6: PIPE6 */
#define NRDY5 0x0020 /* b5: PIPE5 */
#define NRDY4 0x0010 /* b4: PIPE4 */
#define NRDY3 0x0008 /* b3: PIPE3 */
#define NRDY2 0x0004 /* b2: PIPE2 */
#define NRDY1 0x0002 /* b1: PIPE1 */
#define NRDY0 0x0001 /* b1: PIPE0 */
/* BEMP Interrupt Enable/Status Register */
#define BEMP9 0x0200 /* b9: PIPE9 */
#define BEMP8 0x0100 /* b8: PIPE8 */
#define BEMP7 0x0080 /* b7: PIPE7 */
#define BEMP6 0x0040 /* b6: PIPE6 */
#define BEMP5 0x0020 /* b5: PIPE5 */
#define BEMP4 0x0010 /* b4: PIPE4 */
#define BEMP3 0x0008 /* b3: PIPE3 */
#define BEMP2 0x0004 /* b2: PIPE2 */
#define BEMP1 0x0002 /* b1: PIPE1 */
#define BEMP0 0x0001 /* b0: PIPE0 */
/* SOF Pin Configuration Register */
#define TRNENSEL 0x0100 /* b8: Select transaction enable period */
#define BRDYM 0x0040 /* b6: BRDY clear timing */
#define INTL 0x0020 /* b5: Interrupt sense select */
#define EDGESTS 0x0010 /* b4: */
#define SOFMODE 0x000C /* b3-2: SOF pin select */
#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */
#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
/* Interrupt Status Register 0 */
#define VBINT 0x8000 /* b15: VBUS interrupt */
#define RESM 0x4000 /* b14: Resume interrupt */
#define SOFR 0x2000 /* b13: SOF frame update interrupt */
#define DVST 0x1000 /* b12: Device state transition interrupt */
#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
#define BEMP 0x0400 /* b10: Buffer empty interrupt */
#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
#define BRDY 0x0100 /* b8: Buffer ready interrupt */
#define VBSTS 0x0080 /* b7: VBUS input port */
#define DVSQ 0x0070 /* b6-4: Device state */
#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
#define DS_SPD_ADDR 0x0060 /* Suspend Address */
#define DS_SPD_DFLT 0x0050 /* Suspend Default */
#define DS_SPD_POWR 0x0040 /* Suspend Powered */
#define DS_SUSP 0x0040 /* Suspend */
#define DS_CNFG 0x0030 /* Configured */
#define DS_ADDS 0x0020 /* Address */
#define DS_DFLT 0x0010 /* Default */
#define DS_POWR 0x0000 /* Powered */
#define DVSQS 0x0030 /* b5-4: Device state */
#define VALID 0x0008 /* b3: Setup packet detected flag */
#define CTSQ 0x0007 /* b2-0: Control transfer stage */
#define CS_SQER 0x0006 /* Sequence error */
#define CS_WRND 0x0005 /* Control write nodata status stage */
#define CS_WRSS 0x0004 /* Control write status stage */
#define CS_WRDS 0x0003 /* Control write data stage */
#define CS_RDSS 0x0002 /* Control read status stage */
#define CS_RDDS 0x0001 /* Control read data stage */
#define CS_IDST 0x0000 /* Idle or setup stage */
/* Interrupt Status Register 1 */
#define OVRCR 0x8000 /* b15: Over-current interrupt */
#define BCHG 0x4000 /* b14: USB bus chenge interrupt */
#define DTCH 0x1000 /* b12: Detach sense interrupt */
#define ATTCH 0x0800 /* b11: Attach sense interrupt */
#define EOFERR 0x0040 /* b6: EOF-error interrupt */
#define SIGN 0x0020 /* b5: Setup ignore interrupt */
#define SACK 0x0010 /* b4: Setup acknowledge interrupt */
/* Frame Number Register */
#define OVRN 0x8000 /* b15: Overrun error */
#define CRCE 0x4000 /* b14: Received data error */
#define FRNM 0x07FF /* b10-0: Frame number */
/* Micro Frame Number Register */
#define UFRNM 0x0007 /* b2-0: Micro frame number */
/* Default Control Pipe Maxpacket Size Register */
/* Pipe Maxpacket Size Register */
#define DEVSEL 0xF000 /* b15-14: Device address select */
#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
/* Default Control Pipe Control Register */
#define BSTS 0x8000 /* b15: Buffer status */
#define SUREQ 0x4000 /* b14: Send USB request */
#define CSCLR 0x2000 /* b13: complete-split status clear */
#define CSSTS 0x1000 /* b12: complete-split status */
#define SUREQCLR 0x0800 /* b11: stop setup request */
#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
#define SQSET 0x0080 /* b7: Sequence toggle bit set */
#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
#define PBUSY 0x0020 /* b5: pipe busy */
#define PINGE 0x0010 /* b4: ping enable */
#define CCPL 0x0004 /* b2: Enable control transfer complete */
#define PID 0x0003 /* b1-0: Response PID */
#define PID_STALL11 0x0003 /* STALL */
#define PID_STALL 0x0002 /* STALL */
#define PID_BUF 0x0001 /* BUF */
#define PID_NAK 0x0000 /* NAK */
/* Pipe Window Select Register */
#define PIPENM 0x0007 /* b2-0: Pipe select */
/* Pipe Configuration Register */
#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */
#define R8A66597_ISO 0xC000 /* Isochronous */
#define R8A66597_INT 0x8000 /* Interrupt */
#define R8A66597_BULK 0x4000 /* Bulk */
#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */
#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */
#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */
#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */
#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */
#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */
/* Pipe Buffer Configuration Register */
#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
#define BUFNMB 0x007F /* b6-0: Pipe buffer number */
#define PIPE0BUF 256
#define PIPExBUF 64
/* Pipe Maxpacket Size Register */
#define MXPS 0x07FF /* b10-0: Maxpacket size */
/* Pipe Cycle Configuration Register */
#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
#define IITV 0x0007 /* b2-0: Isochronous interval */
/* Pipex Control Register */
#define BSTS 0x8000 /* b15: Buffer status */
#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
#define CSCLR 0x2000 /* b13: complete-split status clear */
#define CSSTS 0x1000 /* b12: complete-split status */
#define ATREPM 0x0400 /* b10: Auto repeat mode */
#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
#define SQSET 0x0080 /* b7: Sequence toggle bit set */
#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
#define PBUSY 0x0020 /* b5: pipe busy */
#define PID 0x0003 /* b1-0: Response PID */
/* PIPExTRE */
#define TRENB 0x0200 /* b9: Transaction counter enable */
#define TRCLR 0x0100 /* b8: Transaction counter clear */
/* PIPExTRN */
#define TRNCNT 0xFFFF /* b15-0: Transaction counter */
/* DEVADDx */
#define UPPHUB 0x7800
#define HUBPORT 0x0700
#define USBSPD 0x00C0
#define RTPORT 0x0001
#define R8A66597_MAX_NUM_PIPE 10
#define R8A66597_BUF_BSIZE 8
#define R8A66597_MAX_DEVICE 10
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
#define R8A66597_MAX_ROOT_HUB 1
#else
#define R8A66597_MAX_ROOT_HUB 2
#endif
#define R8A66597_MAX_SAMPLING 5
#define R8A66597_RH_POLL_TIME 10
#define R8A66597_MAX_DMA_CHANNEL 2
#define R8A66597_PIPE_NO_DMA R8A66597_MAX_DMA_CHANNEL
#define check_bulk_or_isoc(pipenum) ((pipenum >= 1 && pipenum <= 5))
#define check_interrupt(pipenum) ((pipenum >= 6 && pipenum <= 9))
#define make_devsel(addr) (addr << 12)
struct r8a66597_pipe_info {
unsigned long timer_interval;
u16 pipenum;
u16 address; /* R8A66597 HCD usb address */
u16 epnum;
u16 maxpacket;
u16 type;
u16 bufnum;
u16 buf_bsize;
u16 interval;
u16 dir_in;
};
struct r8a66597_pipe {
struct r8a66597_pipe_info info;
unsigned long fifoaddr;
unsigned long fifosel;
unsigned long fifoctr;
unsigned long pipectr;
unsigned long pipetre;
unsigned long pipetrn;
};
struct r8a66597_td {
struct r8a66597_pipe *pipe;
struct urb *urb;
struct list_head queue;
u16 type;
u16 pipenum;
int iso_cnt;
u16 address; /* R8A66597's USB address */
u16 maxpacket;
unsigned zero_packet:1;
unsigned short_packet:1;
unsigned set_address:1;
};
struct r8a66597_device {
u16 address; /* R8A66597's USB address */
u16 hub_port;
u16 root_port;
unsigned short ep_in_toggle;
unsigned short ep_out_toggle;
unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
unsigned char dma_map;
enum usb_device_state state;
struct usb_device *udev;
int usb_address;
struct list_head device_list;
};
struct r8a66597_root_hub {
u32 port;
u16 old_syssts;
int scount;
struct r8a66597_device *dev;
};
struct r8a66597 {
spinlock_t lock;
unsigned long reg;
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
struct clk *clk;
#endif
struct r8a66597_device device0;
struct r8a66597_root_hub root_hub[R8A66597_MAX_ROOT_HUB];
struct list_head pipe_queue[R8A66597_MAX_NUM_PIPE];
struct timer_list rh_timer;
struct timer_list td_timer[R8A66597_MAX_NUM_PIPE];
struct timer_list interval_timer[R8A66597_MAX_NUM_PIPE];
unsigned short address_map;
unsigned short timeout_map;
unsigned short interval_map;
unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
unsigned char dma_map;
struct list_head child_device;
unsigned long child_connect_map[4];
};
static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd)
{
return (struct r8a66597 *)(hcd->hcd_priv);
}
static inline struct usb_hcd *r8a66597_to_hcd(struct r8a66597 *r8a66597)
{
return container_of((void *)r8a66597, struct usb_hcd, hcd_priv);
}
static inline struct r8a66597_td *r8a66597_get_td(struct r8a66597 *r8a66597,
u16 pipenum)
{
if (unlikely(list_empty(&r8a66597->pipe_queue[pipenum])))
return NULL;
return list_entry(r8a66597->pipe_queue[pipenum].next,
struct r8a66597_td, queue);
}
static inline struct urb *r8a66597_get_urb(struct r8a66597 *r8a66597,
u16 pipenum)
{
struct r8a66597_td *td;
td = r8a66597_get_td(r8a66597, pipenum);
return (td ? td->urb : NULL);
}
static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
{
return inw(r8a66597->reg + offset);
}
static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
unsigned long offset, u16 *buf,
int len)
{
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
unsigned long fifoaddr = r8a66597->reg + offset;
unsigned long count;
count = len / 4;
insl(fifoaddr, buf, count);
if (len & 0x00000003) {
unsigned long tmp = inl(fifoaddr);
memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
}
#else
len = (len + 1) / 2;
insw(r8a66597->reg + offset, buf, len);
#endif
}
static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
unsigned long offset)
{
outw(val, r8a66597->reg + offset);
}
static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
unsigned long offset, u16 *buf,
int len)
{
unsigned long fifoaddr = r8a66597->reg + offset;
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
unsigned long count;
unsigned char *pb;
int i;
count = len / 4;
outsl(fifoaddr, buf, count);
if (len & 0x00000003) {
pb = (unsigned char *)buf + count * 4;
for (i = 0; i < (len & 0x00000003); i++) {
if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
outb(pb[i], fifoaddr + i);
else
outb(pb[i], fifoaddr + 3 - i);
}
}
#else
int odd = len & 0x0001;
len = len / 2;
outsw(fifoaddr, buf, len);
if (unlikely(odd)) {
buf = &buf[len];
outb((unsigned char)*buf, fifoaddr);
}
#endif
}
static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
u16 val, u16 pat, unsigned long offset)
{
u16 tmp;
tmp = r8a66597_read(r8a66597, offset);
tmp = tmp & (~pat);
tmp = tmp | val;
r8a66597_write(r8a66597, tmp, offset);
}
#define r8a66597_bclr(r8a66597, val, offset) \
r8a66597_mdfy(r8a66597, 0, val, offset)
#define r8a66597_bset(r8a66597, val, offset) \
r8a66597_mdfy(r8a66597, val, 0, offset)
static inline unsigned long get_syscfg_reg(int port)
{
return port == 0 ? SYSCFG0 : SYSCFG1;
}
static inline unsigned long get_syssts_reg(int port)
{
return port == 0 ? SYSSTS0 : SYSSTS1;
}
static inline unsigned long get_dvstctr_reg(int port)
{
return port == 0 ? DVSTCTR0 : DVSTCTR1;
}
static inline unsigned long get_dmacfg_reg(int port)
{
return port == 0 ? DMA0CFG : DMA1CFG;
}
static inline unsigned long get_intenb_reg(int port)
{
return port == 0 ? INTENB1 : INTENB2;
}
static inline unsigned long get_intsts_reg(int port)
{
return port == 0 ? INTSTS1 : INTSTS2;
}
static inline u16 get_rh_usb_speed(struct r8a66597 *r8a66597, int port)
{
unsigned long dvstctr_reg = get_dvstctr_reg(port);
return r8a66597_read(r8a66597, dvstctr_reg) & RHST;
}
static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
int power)
{
unsigned long dvstctr_reg = get_dvstctr_reg(port);
if (power)
r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
else
r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
}
#define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2)
#define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4)
#define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4)
#define get_devadd_addr(address) (DEVADD0 + address * 2)
#define enable_irq_ready(r8a66597, pipenum) \
enable_pipe_irq(r8a66597, pipenum, BRDYENB)
#define disable_irq_ready(r8a66597, pipenum) \
disable_pipe_irq(r8a66597, pipenum, BRDYENB)
#define enable_irq_empty(r8a66597, pipenum) \
enable_pipe_irq(r8a66597, pipenum, BEMPENB)
#define disable_irq_empty(r8a66597, pipenum) \
disable_pipe_irq(r8a66597, pipenum, BEMPENB)
#define enable_irq_nrdy(r8a66597, pipenum) \
enable_pipe_irq(r8a66597, pipenum, NRDYENB)
#define disable_irq_nrdy(r8a66597, pipenum) \
disable_pipe_irq(r8a66597, pipenum, NRDYENB)
#endif /* __R8A66597_H__ */
