swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 88026842b0a760145aa71d69e74fbc9ec118ca44 authored by Linus Torvalds on 03 January 2006, 03:21:10 UTC
Linux v2.6.15
Linux v2.6.15
Tip revision: 8802684
kobil_sct.h
#define SUSBCRequest_SetBaudRateParityAndStopBits 1
#define SUSBCR_SBR_MASK 0xFF00
#define SUSBCR_SBR_1200 0x0100
#define SUSBCR_SBR_9600 0x0200
#define SUSBCR_SBR_19200 0x0400
#define SUSBCR_SBR_28800 0x0800
#define SUSBCR_SBR_38400 0x1000
#define SUSBCR_SBR_57600 0x2000
#define SUSBCR_SBR_115200 0x4000
#define SUSBCR_SPASB_MASK 0x0070
#define SUSBCR_SPASB_NoParity 0x0010
#define SUSBCR_SPASB_OddParity 0x0020
#define SUSBCR_SPASB_EvenParity 0x0040
#define SUSBCR_SPASB_STPMASK 0x0003
#define SUSBCR_SPASB_1StopBit 0x0001
#define SUSBCR_SPASB_2StopBits 0x0002
#define SUSBCRequest_SetStatusLinesOrQueues 2
#define SUSBCR_SSL_SETRTS 0x0001
#define SUSBCR_SSL_CLRRTS 0x0002
#define SUSBCR_SSL_SETDTR 0x0004
#define SUSBCR_SSL_CLRDTR 0x0010
#define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port.
#define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port.
#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there.
#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there.
#define SUSBCRequest_GetStatusLineState 4
#define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received
#define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty
#define SUSBCR_GSL_CTS 0x0008 // CTS changed state
#define SUSBCR_GSL_DSR 0x0010 // DSR changed state
#define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state
#define SUSBCR_GSL_BREAK 0x0040 // BREAK received
#define SUSBCR_GSL_ERR 0x0080 // Line status error occurred
#define SUSBCR_GSL_RING 0x0100 // Ring signal detected
#define SUSBCRequest_Misc 8
#define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence
#define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues
#define SUSBCRequest_GetMisc 0x10
#define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device,
coded like this 0xHHLLBBPP
with HH = Firmware Version High Byte
LL = Firmware Version Low Byte
BB = Build Number
PP = Further Attributes
*/
#define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device
coded like this 0xHHLLPPRR
with HH = Software Version High Byte
LL = Software Version Low Byte
PP = Further Attributes
RR = Reserved for the hardware ID
*/