swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: f4a75d2eb7b1e2206094b901be09adb31ba63681 authored by Linus Torvalds on 17 November 2012, 01:42:40 UTC
Linux 3.7-rc6
Linux 3.7-rc6
Tip revision: f4a75d2
kobil_sct.h
#define SUSBCRequest_SetBaudRateParityAndStopBits 1
#define SUSBCR_SBR_MASK 0xFF00
#define SUSBCR_SBR_1200 0x0100
#define SUSBCR_SBR_9600 0x0200
#define SUSBCR_SBR_19200 0x0400
#define SUSBCR_SBR_28800 0x0800
#define SUSBCR_SBR_38400 0x1000
#define SUSBCR_SBR_57600 0x2000
#define SUSBCR_SBR_115200 0x4000
#define SUSBCR_SPASB_MASK 0x0070
#define SUSBCR_SPASB_NoParity 0x0010
#define SUSBCR_SPASB_OddParity 0x0020
#define SUSBCR_SPASB_EvenParity 0x0040
#define SUSBCR_SPASB_STPMASK 0x0003
#define SUSBCR_SPASB_1StopBit 0x0001
#define SUSBCR_SPASB_2StopBits 0x0002
#define SUSBCRequest_SetStatusLinesOrQueues 2
#define SUSBCR_SSL_SETRTS 0x0001
#define SUSBCR_SSL_CLRRTS 0x0002
#define SUSBCR_SSL_SETDTR 0x0004
#define SUSBCR_SSL_CLRDTR 0x0010
/* Kill the pending/current writes to the comm port. */
#define SUSBCR_SSL_PURGE_TXABORT 0x0100
/* Kill the pending/current reads to the comm port. */
#define SUSBCR_SSL_PURGE_RXABORT 0x0200
/* Kill the transmit queue if there. */
#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400
/* Kill the typeahead buffer if there. */
#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800
#define SUSBCRequest_GetStatusLineState 4
/* Any Character received */
#define SUSBCR_GSL_RXCHAR 0x0001
/* Transmitt Queue Empty */
#define SUSBCR_GSL_TXEMPTY 0x0004
/* CTS changed state */
#define SUSBCR_GSL_CTS 0x0008
/* DSR changed state */
#define SUSBCR_GSL_DSR 0x0010
/* RLSD changed state */
#define SUSBCR_GSL_RLSD 0x0020
/* BREAK received */
#define SUSBCR_GSL_BREAK 0x0040
/* Line status error occurred */
#define SUSBCR_GSL_ERR 0x0080
/* Ring signal detected */
#define SUSBCR_GSL_RING 0x0100
#define SUSBCRequest_Misc 8
/* use a predefined reset sequence */
#define SUSBCR_MSC_ResetReader 0x0001
/* use a predefined sequence to reset the internal queues */
#define SUSBCR_MSC_ResetAllQueues 0x0002
#define SUSBCRequest_GetMisc 0x10
/*
* get the firmware version from device, coded like this 0xHHLLBBPP with
* HH = Firmware Version High Byte
* LL = Firmware Version Low Byte
* BB = Build Number
* PP = Further Attributes
*/
#define SUSBCR_MSC_GetFWVersion 0x0001
/*
* get the hardware version from device coded like this 0xHHLLPPRR with
* HH = Software Version High Byte
* LL = Software Version Low Byte
* PP = Further Attributes
* RR = Reserved for the hardware ID
*/
#define SUSBCR_MSC_GetHWVersion 0x0002