swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: b2cd1df66037e7c4697c7e40496bf7e4a5e16a2d authored by Linus Torvalds on 07 January 2018, 22:22:41 UTC
Linux 4.15-rc7
Linux 4.15-rc7
Tip revision: b2cd1df
omninet.c
// SPDX-License-Identifier: GPL-2.0
/*
* USB ZyXEL omni.net LCD PLUS driver
*
* Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org>
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*
* Please report both successes and troubles to the author at omninet@kroah.com
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#define DRIVER_AUTHOR "Alessandro Zummo"
#define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver"
#define ZYXEL_VENDOR_ID 0x0586
#define ZYXEL_OMNINET_ID 0x1000
/* This one seems to be a re-branded ZyXEL device */
#define BT_IGNITIONPRO_ID 0x2000
/* function prototypes */
static void omninet_process_read_urb(struct urb *urb);
static int omninet_prepare_write_buffer(struct usb_serial_port *port,
void *buf, size_t count);
static int omninet_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds);
static int omninet_port_probe(struct usb_serial_port *port);
static int omninet_port_remove(struct usb_serial_port *port);
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_serial_driver zyxel_omninet_device = {
.driver = {
.owner = THIS_MODULE,
.name = "omninet",
},
.description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_bulk_out = 2,
.calc_num_ports = omninet_calc_num_ports,
.port_probe = omninet_port_probe,
.port_remove = omninet_port_remove,
.process_read_urb = omninet_process_read_urb,
.prepare_write_buffer = omninet_prepare_write_buffer,
};
static struct usb_serial_driver * const serial_drivers[] = {
&zyxel_omninet_device, NULL
};
/*
* The protocol.
*
* The omni.net always exchange 64 bytes of data with the host. The first
* four bytes are the control header.
*
* oh_seq is a sequence number. Don't know if/how it's used.
* oh_len is the length of the data bytes in the packet.
* oh_xxx Bit-mapped, related to handshaking and status info.
* I normally set it to 0x03 in transmitted frames.
* 7: Active when the TA is in a CONNECTed state.
* 6: unknown
* 5: handshaking, unknown
* 4: handshaking, unknown
* 3: unknown, usually 0
* 2: unknown, usually 0
* 1: handshaking, unknown, usually set to 1 in transmitted frames
* 0: handshaking, unknown, usually set to 1 in transmitted frames
* oh_pad Probably a pad byte.
*
* After the header you will find data bytes if oh_len was greater than zero.
*/
struct omninet_header {
__u8 oh_seq;
__u8 oh_len;
__u8 oh_xxx;
__u8 oh_pad;
};
struct omninet_data {
__u8 od_outseq; /* Sequence number for bulk_out URBs */
};
static int omninet_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds)
{
/* We need only the second bulk-out for our single-port device. */
epds->bulk_out[0] = epds->bulk_out[1];
epds->num_bulk_out = 1;
return 1;
}
static int omninet_port_probe(struct usb_serial_port *port)
{
struct omninet_data *od;
od = kzalloc(sizeof(*od), GFP_KERNEL);
if (!od)
return -ENOMEM;
usb_set_serial_port_data(port, od);
return 0;
}
static int omninet_port_remove(struct usb_serial_port *port)
{
struct omninet_data *od;
od = usb_get_serial_port_data(port);
kfree(od);
return 0;
}
#define OMNINET_HEADERLEN 4
#define OMNINET_BULKOUTSIZE 64
#define OMNINET_PAYLOADSIZE (OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN)
static void omninet_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
const struct omninet_header *hdr = urb->transfer_buffer;
const unsigned char *data;
size_t data_len;
if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len)
return;
data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN;
data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN,
hdr->oh_len);
tty_insert_flip_string(&port->port, data, data_len);
tty_flip_buffer_push(&port->port);
}
static int omninet_prepare_write_buffer(struct usb_serial_port *port,
void *buf, size_t count)
{
struct omninet_data *od = usb_get_serial_port_data(port);
struct omninet_header *header = buf;
count = min_t(size_t, count, OMNINET_PAYLOADSIZE);
count = kfifo_out_locked(&port->write_fifo, buf + OMNINET_HEADERLEN,
count, &port->lock);
header->oh_seq = od->od_outseq++;
header->oh_len = count;
header->oh_xxx = 0x03;
header->oh_pad = 0x00;
/* always 64 bytes */
return OMNINET_BULKOUTSIZE;
}
module_usb_serial_driver(serial_drivers, id_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL v2");