swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: fb33c6510d5595144d585aa194d377cf74d31911 authored by Linus Torvalds on 15 March 2020, 22:01:23 UTC
Linux 5.6-rc6
Linux 5.6-rc6
Tip revision: fb33c65
transport.h
// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for USB Mass Storage compliant devices
* Transport Functions Header File
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* This driver is based on the 'USB Mass Storage Class' document. This
* describes in detail the protocol used to communicate with such
* devices. Clearly, the designers had SCSI and ATAPI commands in
* mind when they created this document. The commands are all very
* similar to commands in the SCSI-II and ATAPI specifications.
*
* It is important to note that in a number of cases this class
* exhibits class-specific exemptions from the USB specification.
* Notably the usage of NAK, STALL and ACK differs from the norm, in
* that they are used to communicate wait, failed and OK on commands.
*
* Also, for certain devices, the interrupt endpoint is used to convey
* status of a command.
*/
#ifndef _TRANSPORT_H_
#define _TRANSPORT_H_
#include <linux/blkdev.h>
/*
* usb_stor_bulk_transfer_xxx() return codes, in order of severity
*/
#define USB_STOR_XFER_GOOD 0 /* good transfer */
#define USB_STOR_XFER_SHORT 1 /* transferred less than expected */
#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */
#define USB_STOR_XFER_LONG 3 /* device tried to send too much */
#define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */
/*
* Transport return codes
*/
#define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */
#define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */
#define USB_STOR_TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */
#define USB_STOR_TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */
/*
* We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
* return codes. But now the transport and low-level transfer routines
* treat an abort as just another error (-ENOENT for a cancelled URB).
* It is up to the invoke_transport() function to test for aborts and
* distinguish them from genuine communication errors.
*/
/*
* CBI accept device specific command
*/
#define US_CBI_ADSC 0
extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
extern int usb_stor_CB_reset(struct us_data*);
extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
extern int usb_stor_Bulk_max_lun(struct us_data*);
extern int usb_stor_Bulk_reset(struct us_data*);
extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
extern void usb_stor_stop_transport(struct us_data*);
extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
u8 request, u8 requesttype, u16 value, u16 index,
void *data, u16 size, int timeout);
extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
u8 request, u8 requesttype, u16 value, u16 index,
void *data, u16 size);
extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, unsigned int *act_len);
extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, int use_sg, int *residual);
extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
struct scsi_cmnd* srb);
extern int usb_stor_port_reset(struct us_data *us);
#endif