swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 9e82bf014195d6f0054982c463575cdce24292be authored by Linus Torvalds on 15 September 2014, 00:50:12 UTC
Linux 3.17-rc5
Linux 3.17-rc5
Tip revision: 9e82bf0
hdmi.c
/*
* Copyright (C) 2012 Avionic Design GmbH
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sub license,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/hdmi.h>
#include <linux/string.h>
static void hdmi_infoframe_checksum(void *buffer, size_t size)
{
u8 *ptr = buffer;
u8 csum = 0;
size_t i;
/* compute checksum */
for (i = 0; i < size; i++)
csum += ptr[i];
ptr[3] = 256 - csum;
}
/**
* hdmi_avi_infoframe_init() - initialize an HDMI AVI infoframe
* @frame: HDMI AVI infoframe
*
* Returns 0 on success or a negative error code on failure.
*/
int hdmi_avi_infoframe_init(struct hdmi_avi_infoframe *frame)
{
memset(frame, 0, sizeof(*frame));
frame->type = HDMI_INFOFRAME_TYPE_AVI;
frame->version = 2;
frame->length = HDMI_AVI_INFOFRAME_SIZE;
return 0;
}
EXPORT_SYMBOL(hdmi_avi_infoframe_init);
/**
* hdmi_avi_infoframe_pack() - write HDMI AVI infoframe to binary buffer
* @frame: HDMI AVI infoframe
* @buffer: destination buffer
* @size: size of buffer
*
* Packs the information contained in the @frame structure into a binary
* representation that can be written into the corresponding controller
* registers. Also computes the checksum as required by section 5.3.5 of
* the HDMI 1.4 specification.
*
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer,
size_t size)
{
u8 *ptr = buffer;
size_t length;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
if (size < length)
return -ENOSPC;
memset(buffer, 0, size);
ptr[0] = frame->type;
ptr[1] = frame->version;
ptr[2] = frame->length;
ptr[3] = 0; /* checksum */
/* start infoframe payload */
ptr += HDMI_INFOFRAME_HEADER_SIZE;
ptr[0] = ((frame->colorspace & 0x3) << 5) | (frame->scan_mode & 0x3);
/*
* Data byte 1, bit 4 has to be set if we provide the active format
* aspect ratio
*/
if (frame->active_aspect & 0xf)
ptr[0] |= BIT(4);
/* Bit 3 and 2 indicate if we transmit horizontal/vertical bar data */
if (frame->top_bar || frame->bottom_bar)
ptr[0] |= BIT(3);
if (frame->left_bar || frame->right_bar)
ptr[0] |= BIT(2);
ptr[1] = ((frame->colorimetry & 0x3) << 6) |
((frame->picture_aspect & 0x3) << 4) |
(frame->active_aspect & 0xf);
ptr[2] = ((frame->extended_colorimetry & 0x7) << 4) |
((frame->quantization_range & 0x3) << 2) |
(frame->nups & 0x3);
if (frame->itc)
ptr[2] |= BIT(7);
ptr[3] = frame->video_code & 0x7f;
ptr[4] = ((frame->ycc_quantization_range & 0x3) << 6) |
((frame->content_type & 0x3) << 4) |
(frame->pixel_repeat & 0xf);
ptr[5] = frame->top_bar & 0xff;
ptr[6] = (frame->top_bar >> 8) & 0xff;
ptr[7] = frame->bottom_bar & 0xff;
ptr[8] = (frame->bottom_bar >> 8) & 0xff;
ptr[9] = frame->left_bar & 0xff;
ptr[10] = (frame->left_bar >> 8) & 0xff;
ptr[11] = frame->right_bar & 0xff;
ptr[12] = (frame->right_bar >> 8) & 0xff;
hdmi_infoframe_checksum(buffer, length);
return length;
}
EXPORT_SYMBOL(hdmi_avi_infoframe_pack);
/**
* hdmi_spd_infoframe_init() - initialize an HDMI SPD infoframe
* @frame: HDMI SPD infoframe
* @vendor: vendor string
* @product: product string
*
* Returns 0 on success or a negative error code on failure.
*/
int hdmi_spd_infoframe_init(struct hdmi_spd_infoframe *frame,
const char *vendor, const char *product)
{
memset(frame, 0, sizeof(*frame));
frame->type = HDMI_INFOFRAME_TYPE_SPD;
frame->version = 1;
frame->length = HDMI_SPD_INFOFRAME_SIZE;
strncpy(frame->vendor, vendor, sizeof(frame->vendor));
strncpy(frame->product, product, sizeof(frame->product));
return 0;
}
EXPORT_SYMBOL(hdmi_spd_infoframe_init);
/**
* hdmi_spd_infoframe_pack() - write HDMI SPD infoframe to binary buffer
* @frame: HDMI SPD infoframe
* @buffer: destination buffer
* @size: size of buffer
*
* Packs the information contained in the @frame structure into a binary
* representation that can be written into the corresponding controller
* registers. Also computes the checksum as required by section 5.3.5 of
* the HDMI 1.4 specification.
*
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer,
size_t size)
{
u8 *ptr = buffer;
size_t length;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
if (size < length)
return -ENOSPC;
memset(buffer, 0, size);
ptr[0] = frame->type;
ptr[1] = frame->version;
ptr[2] = frame->length;
ptr[3] = 0; /* checksum */
/* start infoframe payload */
ptr += HDMI_INFOFRAME_HEADER_SIZE;
memcpy(ptr, frame->vendor, sizeof(frame->vendor));
memcpy(ptr + 8, frame->product, sizeof(frame->product));
ptr[24] = frame->sdi;
hdmi_infoframe_checksum(buffer, length);
return length;
}
EXPORT_SYMBOL(hdmi_spd_infoframe_pack);
/**
* hdmi_audio_infoframe_init() - initialize an HDMI audio infoframe
* @frame: HDMI audio infoframe
*
* Returns 0 on success or a negative error code on failure.
*/
int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame)
{
memset(frame, 0, sizeof(*frame));
frame->type = HDMI_INFOFRAME_TYPE_AUDIO;
frame->version = 1;
frame->length = HDMI_AUDIO_INFOFRAME_SIZE;
return 0;
}
EXPORT_SYMBOL(hdmi_audio_infoframe_init);
/**
* hdmi_audio_infoframe_pack() - write HDMI audio infoframe to binary buffer
* @frame: HDMI audio infoframe
* @buffer: destination buffer
* @size: size of buffer
*
* Packs the information contained in the @frame structure into a binary
* representation that can be written into the corresponding controller
* registers. Also computes the checksum as required by section 5.3.5 of
* the HDMI 1.4 specification.
*
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
void *buffer, size_t size)
{
unsigned char channels;
u8 *ptr = buffer;
size_t length;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
if (size < length)
return -ENOSPC;
memset(buffer, 0, size);
if (frame->channels >= 2)
channels = frame->channels - 1;
else
channels = 0;
ptr[0] = frame->type;
ptr[1] = frame->version;
ptr[2] = frame->length;
ptr[3] = 0; /* checksum */
/* start infoframe payload */
ptr += HDMI_INFOFRAME_HEADER_SIZE;
ptr[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
ptr[1] = ((frame->sample_frequency & 0x7) << 2) |
(frame->sample_size & 0x3);
ptr[2] = frame->coding_type_ext & 0x1f;
ptr[3] = frame->channel_allocation;
ptr[4] = (frame->level_shift_value & 0xf) << 3;
if (frame->downmix_inhibit)
ptr[4] |= BIT(7);
hdmi_infoframe_checksum(buffer, length);
return length;
}
EXPORT_SYMBOL(hdmi_audio_infoframe_pack);
/**
* hdmi_vendor_infoframe_init() - initialize an HDMI vendor infoframe
* @frame: HDMI vendor infoframe
*
* Returns 0 on success or a negative error code on failure.
*/
int hdmi_vendor_infoframe_init(struct hdmi_vendor_infoframe *frame)
{
memset(frame, 0, sizeof(*frame));
frame->type = HDMI_INFOFRAME_TYPE_VENDOR;
frame->version = 1;
frame->oui = HDMI_IEEE_OUI;
/*
* 0 is a valid value for s3d_struct, so we use a special "not set"
* value
*/
frame->s3d_struct = HDMI_3D_STRUCTURE_INVALID;
return 0;
}
EXPORT_SYMBOL(hdmi_vendor_infoframe_init);
/**
* hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer
* @frame: HDMI infoframe
* @buffer: destination buffer
* @size: size of buffer
*
* Packs the information contained in the @frame structure into a binary
* representation that can be written into the corresponding controller
* registers. Also computes the checksum as required by section 5.3.5 of
* the HDMI 1.4 specification.
*
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
void *buffer, size_t size)
{
u8 *ptr = buffer;
size_t length;
/* empty info frame */
if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID)
return -EINVAL;
/* only one of those can be supplied */
if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
return -EINVAL;
/* for side by side (half) we also need to provide 3D_Ext_Data */
if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
frame->length = 6;
else
frame->length = 5;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
if (size < length)
return -ENOSPC;
memset(buffer, 0, size);
ptr[0] = frame->type;
ptr[1] = frame->version;
ptr[2] = frame->length;
ptr[3] = 0; /* checksum */
/* HDMI OUI */
ptr[4] = 0x03;
ptr[5] = 0x0c;
ptr[6] = 0x00;
if (frame->vic) {
ptr[7] = 0x1 << 5; /* video format */
ptr[8] = frame->vic;
} else {
ptr[7] = 0x2 << 5; /* video format */
ptr[8] = (frame->s3d_struct & 0xf) << 4;
if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
ptr[9] = (frame->s3d_ext_data & 0xf) << 4;
}
hdmi_infoframe_checksum(buffer, length);
return length;
}
EXPORT_SYMBOL(hdmi_vendor_infoframe_pack);
/*
* hdmi_vendor_any_infoframe_pack() - write a vendor infoframe to binary buffer
*/
static ssize_t
hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
void *buffer, size_t size)
{
/* we only know about HDMI vendor infoframes */
if (frame->any.oui != HDMI_IEEE_OUI)
return -EINVAL;
return hdmi_vendor_infoframe_pack(&frame->hdmi, buffer, size);
}
/**
* hdmi_infoframe_pack() - write a HDMI infoframe to binary buffer
* @frame: HDMI infoframe
* @buffer: destination buffer
* @size: size of buffer
*
* Packs the information contained in the @frame structure into a binary
* representation that can be written into the corresponding controller
* registers. Also computes the checksum as required by section 5.3.5 of
* the HDMI 1.4 specification.
*
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
ssize_t
hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer, size_t size)
{
ssize_t length;
switch (frame->any.type) {
case HDMI_INFOFRAME_TYPE_AVI:
length = hdmi_avi_infoframe_pack(&frame->avi, buffer, size);
break;
case HDMI_INFOFRAME_TYPE_SPD:
length = hdmi_spd_infoframe_pack(&frame->spd, buffer, size);
break;
case HDMI_INFOFRAME_TYPE_AUDIO:
length = hdmi_audio_infoframe_pack(&frame->audio, buffer, size);
break;
case HDMI_INFOFRAME_TYPE_VENDOR:
length = hdmi_vendor_any_infoframe_pack(&frame->vendor,
buffer, size);
break;
default:
WARN(1, "Bad infoframe type %d\n", frame->any.type);
length = -EINVAL;
}
return length;
}
EXPORT_SYMBOL(hdmi_infoframe_pack);