swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 724e6d3fe8003c3f60bf404bf22e4e331327c596 authored by Linus Torvalds on 12 February 2010, 19:07:45 UTC
Linux 2.6.33-rc8
Linux 2.6.33-rc8
Tip revision: 724e6d3
sunxvr2500.c
/* s3d.c: Sun 3DLABS XVR-2500 et al. driver for sparc64 systems
*
* Copyright (C) 2007 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <asm/io.h>
struct s3d_info {
struct fb_info *info;
struct pci_dev *pdev;
char __iomem *fb_base;
unsigned long fb_base_phys;
struct device_node *of_node;
unsigned int width;
unsigned int height;
unsigned int depth;
unsigned int fb_size;
u32 pseudo_palette[16];
};
static int __devinit s3d_get_props(struct s3d_info *sp)
{
sp->width = of_getintprop_default(sp->of_node, "width", 0);
sp->height = of_getintprop_default(sp->of_node, "height", 0);
sp->depth = of_getintprop_default(sp->of_node, "depth", 8);
if (!sp->width || !sp->height) {
printk(KERN_ERR "s3d: Critical properties missing for %s\n",
pci_name(sp->pdev));
return -EINVAL;
}
return 0;
}
static int s3d_setcolreg(unsigned regno,
unsigned red, unsigned green, unsigned blue,
unsigned transp, struct fb_info *info)
{
u32 value;
if (regno < 16) {
red >>= 8;
green >>= 8;
blue >>= 8;
value = (blue << 24) | (green << 16) | (red << 8);
((u32 *)info->pseudo_palette)[regno] = value;
}
return 0;
}
static struct fb_ops s3d_ops = {
.owner = THIS_MODULE,
.fb_setcolreg = s3d_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
};
static int __devinit s3d_set_fbinfo(struct s3d_info *sp)
{
struct fb_info *info = sp->info;
struct fb_var_screeninfo *var = &info->var;
info->flags = FBINFO_DEFAULT;
info->fbops = &s3d_ops;
info->screen_base = sp->fb_base;
info->screen_size = sp->fb_size;
info->pseudo_palette = sp->pseudo_palette;
/* Fill fix common fields */
strlcpy(info->fix.id, "s3d", sizeof(info->fix.id));
info->fix.smem_start = sp->fb_base_phys;
info->fix.smem_len = sp->fb_size;
info->fix.type = FB_TYPE_PACKED_PIXELS;
if (sp->depth == 32 || sp->depth == 24)
info->fix.visual = FB_VISUAL_TRUECOLOR;
else
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
var->xres = sp->width;
var->yres = sp->height;
var->xres_virtual = var->xres;
var->yres_virtual = var->yres;
var->bits_per_pixel = sp->depth;
var->red.offset = 8;
var->red.length = 8;
var->green.offset = 16;
var->green.length = 8;
var->blue.offset = 24;
var->blue.length = 8;
var->transp.offset = 0;
var->transp.length = 0;
if (fb_alloc_cmap(&info->cmap, 256, 0)) {
printk(KERN_ERR "s3d: Cannot allocate color map.\n");
return -ENOMEM;
}
return 0;
}
static int __devinit s3d_pci_register(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct fb_info *info;
struct s3d_info *sp;
int err;
err = pci_enable_device(pdev);
if (err < 0) {
printk(KERN_ERR "s3d: Cannot enable PCI device %s\n",
pci_name(pdev));
goto err_out;
}
info = framebuffer_alloc(sizeof(struct s3d_info), &pdev->dev);
if (!info) {
printk(KERN_ERR "s3d: Cannot allocate fb_info\n");
err = -ENOMEM;
goto err_disable;
}
sp = info->par;
sp->info = info;
sp->pdev = pdev;
sp->of_node = pci_device_to_OF_node(pdev);
if (!sp->of_node) {
printk(KERN_ERR "s3d: Cannot find OF node of %s\n",
pci_name(pdev));
err = -ENODEV;
goto err_release_fb;
}
sp->fb_base_phys = pci_resource_start (pdev, 1);
err = pci_request_region(pdev, 1, "s3d framebuffer");
if (err < 0) {
printk("s3d: Cannot request region 1 for %s\n",
pci_name(pdev));
goto err_release_fb;
}
err = s3d_get_props(sp);
if (err)
goto err_release_pci;
/* XXX 'linebytes' is often wrong, it is equal to the width
* XXX with depth of 32 on my XVR-2500 which is clearly not
* XXX right. So we don't try to use it.
*/
switch (sp->depth) {
case 8:
info->fix.line_length = sp->width;
break;
case 16:
info->fix.line_length = sp->width * 2;
break;
case 24:
info->fix.line_length = sp->width * 3;
break;
case 32:
info->fix.line_length = sp->width * 4;
break;
}
sp->fb_size = info->fix.line_length * sp->height;
sp->fb_base = ioremap(sp->fb_base_phys, sp->fb_size);
if (!sp->fb_base)
goto err_release_pci;
err = s3d_set_fbinfo(sp);
if (err)
goto err_unmap_fb;
pci_set_drvdata(pdev, info);
printk("s3d: Found device at %s\n", pci_name(pdev));
err = register_framebuffer(info);
if (err < 0) {
printk(KERN_ERR "s3d: Could not register framebuffer %s\n",
pci_name(pdev));
goto err_unmap_fb;
}
return 0;
err_unmap_fb:
iounmap(sp->fb_base);
err_release_pci:
pci_release_region(pdev, 1);
err_release_fb:
framebuffer_release(info);
err_disable:
pci_disable_device(pdev);
err_out:
return err;
}
static void __devexit s3d_pci_unregister(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct s3d_info *sp = info->par;
unregister_framebuffer(info);
iounmap(sp->fb_base);
pci_release_region(pdev, 1);
framebuffer_release(info);
pci_disable_device(pdev);
}
static struct pci_device_id s3d_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002c), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002d), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002e), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x002f), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0030), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0031), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0032), },
{ PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0033), },
{ 0, }
};
static struct pci_driver s3d_driver = {
.name = "s3d",
.id_table = s3d_pci_table,
.probe = s3d_pci_register,
.remove = __devexit_p(s3d_pci_unregister),
};
static int __init s3d_init(void)
{
if (fb_get_options("s3d", NULL))
return -ENODEV;
return pci_register_driver(&s3d_driver);
}
static void __exit s3d_exit(void)
{
pci_unregister_driver(&s3d_driver);
}
module_init(s3d_init);
module_exit(s3d_exit);
MODULE_DESCRIPTION("framebuffer driver for Sun XVR-2500 graphics");
MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");