swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: 2c85ebc57b3e1817b6ce1a6b703928e113a90442 authored by Linus Torvalds on 13 December 2020, 22:41:30 UTC
Linux 5.10
Linux 5.10
Tip revision: 2c85ebc
instrumented-non-atomic.h
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This file provides wrappers with sanitizer instrumentation for non-atomic
* bit operations.
*
* To use this functionality, an arch's bitops.h file needs to define each of
* the below bit operations with an arch_ prefix (e.g. arch_set_bit(),
* arch___set_bit(), etc.).
*/
#ifndef _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H
#define _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H
#include <linux/instrumented.h>
/**
* __set_bit - Set a bit in memory
* @nr: the bit to set
* @addr: the address to start counting from
*
* Unlike set_bit(), this function is non-atomic. If it is called on the same
* region of memory concurrently, the effect may be that only one operation
* succeeds.
*/
static inline void __set_bit(long nr, volatile unsigned long *addr)
{
instrument_write(addr + BIT_WORD(nr), sizeof(long));
arch___set_bit(nr, addr);
}
/**
* __clear_bit - Clears a bit in memory
* @nr: the bit to clear
* @addr: the address to start counting from
*
* Unlike clear_bit(), this function is non-atomic. If it is called on the same
* region of memory concurrently, the effect may be that only one operation
* succeeds.
*/
static inline void __clear_bit(long nr, volatile unsigned long *addr)
{
instrument_write(addr + BIT_WORD(nr), sizeof(long));
arch___clear_bit(nr, addr);
}
/**
* __change_bit - Toggle a bit in memory
* @nr: the bit to change
* @addr: the address to start counting from
*
* Unlike change_bit(), this function is non-atomic. If it is called on the same
* region of memory concurrently, the effect may be that only one operation
* succeeds.
*/
static inline void __change_bit(long nr, volatile unsigned long *addr)
{
instrument_write(addr + BIT_WORD(nr), sizeof(long));
arch___change_bit(nr, addr);
}
static inline void __instrument_read_write_bitop(long nr, volatile unsigned long *addr)
{
if (IS_ENABLED(CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC)) {
/*
* We treat non-atomic read-write bitops a little more special.
* Given the operations here only modify a single bit, assuming
* non-atomicity of the writer is sufficient may be reasonable
* for certain usage (and follows the permissible nature of the
* assume-plain-writes-atomic rule):
* 1. report read-modify-write races -> check read;
* 2. do not report races with marked readers, but do report
* races with unmarked readers -> check "atomic" write.
*/
kcsan_check_read(addr + BIT_WORD(nr), sizeof(long));
/*
* Use generic write instrumentation, in case other sanitizers
* or tools are enabled alongside KCSAN.
*/
instrument_write(addr + BIT_WORD(nr), sizeof(long));
} else {
instrument_read_write(addr + BIT_WORD(nr), sizeof(long));
}
}
/**
* __test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
*
* This operation is non-atomic. If two instances of this operation race, one
* can appear to succeed but actually fail.
*/
static inline bool __test_and_set_bit(long nr, volatile unsigned long *addr)
{
__instrument_read_write_bitop(nr, addr);
return arch___test_and_set_bit(nr, addr);
}
/**
* __test_and_clear_bit - Clear a bit and return its old value
* @nr: Bit to clear
* @addr: Address to count from
*
* This operation is non-atomic. If two instances of this operation race, one
* can appear to succeed but actually fail.
*/
static inline bool __test_and_clear_bit(long nr, volatile unsigned long *addr)
{
__instrument_read_write_bitop(nr, addr);
return arch___test_and_clear_bit(nr, addr);
}
/**
* __test_and_change_bit - Change a bit and return its old value
* @nr: Bit to change
* @addr: Address to count from
*
* This operation is non-atomic. If two instances of this operation race, one
* can appear to succeed but actually fail.
*/
static inline bool __test_and_change_bit(long nr, volatile unsigned long *addr)
{
__instrument_read_write_bitop(nr, addr);
return arch___test_and_change_bit(nr, addr);
}
/**
* test_bit - Determine whether a bit is set
* @nr: bit number to test
* @addr: Address to start counting from
*/
static inline bool test_bit(long nr, const volatile unsigned long *addr)
{
instrument_atomic_read(addr + BIT_WORD(nr), sizeof(long));
return arch_test_bit(nr, addr);
}
#endif /* _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H */