swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
Tip revision: f114040e3ea6e07372334ade75d1ee0775c355e1 authored by Linus Torvalds on 20 October 2014, 01:08:38 UTC
Linux 3.18-rc1
Linux 3.18-rc1
Tip revision: f114040
bearer.h
/*
* net/tipc/bearer.h: Include file for TIPC bearer code
*
* Copyright (c) 1996-2006, 2013, Ericsson AB
* Copyright (c) 2005, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_BEARER_H
#define _TIPC_BEARER_H
#include "bcast.h"
#define MAX_BEARERS 2
#define MAX_MEDIA 2
/* Identifiers associated with TIPC message header media address info
* - address info field is 32 bytes long
* - the field's actual content and length is defined per media
* - remaining unused bytes in the field are set to zero
*/
#define TIPC_MEDIA_ADDR_SIZE 32
#define TIPC_MEDIA_TYPE_OFFSET 3
/*
* Identifiers of supported TIPC media types
*/
#define TIPC_MEDIA_TYPE_ETH 1
#define TIPC_MEDIA_TYPE_IB 2
/**
* struct tipc_media_addr - destination address used by TIPC bearers
* @value: address info (format defined by media)
* @media_id: TIPC media type identifier
* @broadcast: non-zero if address is a broadcast address
*/
struct tipc_media_addr {
u8 value[TIPC_MEDIA_ADDR_SIZE];
u8 media_id;
u8 broadcast;
};
struct tipc_bearer;
/**
* struct tipc_media - Media specific info exposed to generic bearer layer
* @send_msg: routine which handles buffer transmission
* @enable_media: routine which enables a media
* @disable_media: routine which disables a media
* @addr2str: convert media address format to string
* @addr2msg: convert from media addr format to discovery msg addr format
* @msg2addr: convert from discovery msg addr format to media addr format
* @raw2addr: convert from raw addr format to media addr format
* @priority: default link (and bearer) priority
* @tolerance: default time (in ms) before declaring link failure
* @window: default window (in packets) before declaring link congestion
* @type_id: TIPC media identifier
* @hwaddr_len: TIPC media address len
* @name: media name
*/
struct tipc_media {
int (*send_msg)(struct sk_buff *buf,
struct tipc_bearer *b_ptr,
struct tipc_media_addr *dest);
int (*enable_media)(struct tipc_bearer *b_ptr);
void (*disable_media)(struct tipc_bearer *b_ptr);
int (*addr2str)(struct tipc_media_addr *addr,
char *strbuf,
int bufsz);
int (*addr2msg)(char *msg, struct tipc_media_addr *addr);
int (*msg2addr)(struct tipc_bearer *b,
struct tipc_media_addr *addr,
char *msg);
int (*raw2addr)(struct tipc_bearer *b,
struct tipc_media_addr *addr,
char *raw);
u32 priority;
u32 tolerance;
u32 window;
u32 type_id;
u32 hwaddr_len;
char name[TIPC_MAX_MEDIA_NAME];
};
/**
* struct tipc_bearer - Generic TIPC bearer structure
* @media_ptr: pointer to additional media-specific information about bearer
* @mtu: max packet size bearer can support
* @addr: media-specific address associated with bearer
* @name: bearer name (format = media:interface)
* @media: ptr to media structure associated with bearer
* @bcast_addr: media address used in broadcasting
* @rcu: rcu struct for tipc_bearer
* @priority: default link priority for bearer
* @window: default window size for bearer
* @tolerance: default link tolerance for bearer
* @domain: network domain to which links can be established
* @identity: array index of this bearer within TIPC bearer array
* @link_req: ptr to (optional) structure making periodic link setup requests
* @net_plane: network plane ('A' through 'H') currently associated with bearer
* @nodes: indicates which nodes in cluster can be reached through bearer
*
* Note: media-specific code is responsible for initialization of the fields
* indicated below when a bearer is enabled; TIPC's generic bearer code takes
* care of initializing all other fields.
*/
struct tipc_bearer {
void __rcu *media_ptr; /* initalized by media */
u32 mtu; /* initalized by media */
struct tipc_media_addr addr; /* initalized by media */
char name[TIPC_MAX_BEARER_NAME];
struct tipc_media *media;
struct tipc_media_addr bcast_addr;
struct rcu_head rcu;
u32 priority;
u32 window;
u32 tolerance;
u32 domain;
u32 identity;
struct tipc_link_req *link_req;
char net_plane;
struct tipc_node_map nodes;
};
struct tipc_bearer_names {
char media_name[TIPC_MAX_MEDIA_NAME];
char if_name[TIPC_MAX_IF_NAME];
};
struct tipc_link;
extern struct tipc_bearer __rcu *bearer_list[];
/*
* TIPC routines available to supported media types
*/
void tipc_rcv(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
int tipc_enable_bearer(const char *bearer_name, u32 disc_domain, u32 priority);
int tipc_disable_bearer(const char *name);
/*
* Routines made available to TIPC by supported media types
*/
extern struct tipc_media eth_media_info;
#ifdef CONFIG_TIPC_MEDIA_IB
extern struct tipc_media ib_media_info;
#endif
int tipc_media_set_priority(const char *name, u32 new_value);
int tipc_media_set_window(const char *name, u32 new_value);
void tipc_media_addr_printf(char *buf, int len, struct tipc_media_addr *a);
struct sk_buff *tipc_media_get_names(void);
int tipc_enable_l2_media(struct tipc_bearer *b);
void tipc_disable_l2_media(struct tipc_bearer *b);
int tipc_l2_send_msg(struct sk_buff *buf, struct tipc_bearer *b,
struct tipc_media_addr *dest);
struct sk_buff *tipc_bearer_get_names(void);
void tipc_bearer_add_dest(u32 bearer_id, u32 dest);
void tipc_bearer_remove_dest(u32 bearer_id, u32 dest);
struct tipc_bearer *tipc_bearer_find(const char *name);
struct tipc_media *tipc_media_find(const char *name);
int tipc_bearer_setup(void);
void tipc_bearer_cleanup(void);
void tipc_bearer_stop(void);
void tipc_bearer_send(u32 bearer_id, struct sk_buff *buf,
struct tipc_media_addr *dest);
#endif /* _TIPC_BEARER_H */