Skip to main content

Browse the archive

swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
sort by:
Revision Author Date Message Commit Date
383fb3e Russell King 19 July 2018, 11:21:31 UTC ARM: spectre-v2: per-CPU vtables to work around big.Little systems In big.Little systems, some CPUs require the Spectre workarounds in paths such as the context switch, but other CPUs do not. In order to handle these differences, we need per-CPU vtables. We are unable to use the kernel's per-CPU variables to support this as per-CPU is not initialised at times when we need access to the vtables, so we have to use an array indexed by logical CPU number. We use an array-of-pointers to avoid having function pointers in the kernel's read/write .data section. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 12 November 2018, 10:51:01 UTC
5df7a99 Julien Thierry 08 November 2018, 16:25:28 UTC ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to itself. It should actually be hwstate->fpinst2 that gets assigned to the ufp_exc field. Fixes commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 ("ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state"). Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 12 November 2018, 10:51:01 UTC
e209950 Russell King 19 July 2018, 11:17:38 UTC ARM: add PROC_VTABLE and PROC_TABLE macros Allow the way we access members of the processor vtable to be changed at compile time. We will need to move to per-CPU vtables to fix the Spectre variant 2 issues on big.Little systems. However, we have a couple of calls that do not need the vtable treatment, and indeed cause a kernel warning due to the (later) use of smp_processor_id(), so also introduce the PROC_TABLE macro for these which always use CPU 0's function pointers. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 12 November 2018, 10:51:01 UTC
945aceb Russell King 19 July 2018, 11:43:03 UTC ARM: clean up per-processor check_bugs method call Call the per-processor type check_bugs() method in the same way as we do other per-processor functions - move the "processor." detail into proc-fns.h. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 12 November 2018, 10:51:01 UTC
65987a8 Russell King 19 July 2018, 10:59:56 UTC ARM: split out processor lookup Split out the lookup of the processor type and associated error handling from the rest of setup_processor() - we will need to use this in the secondary CPU bringup path for big.Little Spectre variant 2 mitigation. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 12 November 2018, 10:51:01 UTC
899a42f Russell King 19 July 2018, 10:42:36 UTC ARM: make lookup_processor_type() non-__init Move lookup_processor_type() out of the __init section so it is callable from (eg) the secondary startup code during hotplug. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> 12 November 2018, 10:51:01 UTC
cbed754 Tony Lindgren 06 November 2018, 15:28:02 UTC drm/omap: dsi: Fix missing of_platform_depopulate() We're missing a call to of_platform_depopulate() on errors for dsi. Looks like dss is already doing this. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106152802.38599-1-tony@atomide.com 12 November 2018, 09:50:13 UTC
24ec84e Laurent Pinchart 10 November 2018, 11:16:54 UTC drm/omap: Move DISPC runtime PM handling to omapdrm The internal encoders (DSI, HDMI4, HDMI5 and VENC) runtime PM handlers attempt to manage the runtime PM state of the connected DISPC, based on the rationale that the DISPC providing data to the encoders requires ensuring that the display is active whenever the encoders are active. While the DISPC provides data to the encoders, it doesn't as such constitute a resource that encoders require in order to be taken out of suspend, contrary to for instance a functional clock or a power supply. Encoders registers can be accessed without the DISPC being active, and while the encoders will not output any video stream without being fed by the DISPC, the DISPC PM state doesn't influence the encoders PM state. For this reason the DISPC PM state is better managed from the omapdrm driver, in the CRTC enable and disable operations. This allows the encoders PM state to be handled separately from the DISPC, and in particular at times when the DISPC may not be available (for instance at probe due to the DSS probe being deferred, or at remove time du to the DISPC being already removed). Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-5-laurent.pinchart@ideasonboard.com 12 November 2018, 09:50:13 UTC
350c03e Laurent Pinchart 10 November 2018, 11:16:53 UTC drm/omap: dsi: Ensure the device is active during probe The probe function performs hardware access to read the number of supported data lanes from a configuration register and thus requires the device to be active. Ensure this by surrounding the access with dsi_runtime_get() and dsi_runtime_put() calls. Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-4-laurent.pinchart@ideasonboard.com 12 November 2018, 09:50:13 UTC
f8523b6 Laurent Pinchart 10 November 2018, 11:16:52 UTC drm/omap: hdmi4: Ensure the device is active during bind The bind function performs hardware access (in hdmi4_cec_init()) and thus requires the device to be active. Ensure this by surrounding the bind function by hdmi_runtime_get() and hdmi_runtime_put() calls. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-3-laurent.pinchart@ideasonboard.com 12 November 2018, 09:50:13 UTC
e0c827a Laurent Pinchart 10 November 2018, 11:16:51 UTC drm/omap: Populate DSS children in omapdss driver The DSS DT node contains children that describe the DSS components (DISPC and internal encoders). Each of those components is handled by a platform driver, and thus needs to be backed by a platform device. The corresponding platform devices are created in mach-omap2 code by a call to of_platform_populate(). While this approach has worked so far, it doesn't model the hardware architecture very well, as it creates child devices before the parent is ready to handle them. This would be akin to creating I2C slaves before the I2C master is available. The task can be easily performed in the omapdss driver code instead, simplifying mach-omap2 code. We however can't remove the mach-omap2 code completely as the omap2fb driver still depends on it, but we can move it to the omap2fb-specific section, where it can stay until the omap2fb driver gets removed. This has the added benefit of not allowing DSS components to probe before the DSS itself, which led to runtime PM issues when the DSS probe is deferred. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-2-laurent.pinchart@ideasonboard.com 12 November 2018, 09:50:13 UTC
1e9c75f Benjamin Coddington 03 October 2018, 14:18:33 UTC mnt: fix __detach_mounts infinite loop Since commit ff17fa561a04 ("d_invalidate(): unhash immediately") immediately unhashes the dentry, we'll never return the mountpoint in lookup_mountpoint(), which can lead to an unbreakable loop in d_invalidate(). I have reports of NFS clients getting into this condition after the server removes an export of an existing mount created through follow_automount(), but I suspect there are various other ways to produce this problem if we hunt down users of d_invalidate(). For example, it is possible to get into this state by using XFS' d_invalidate() call in xfs_vn_unlink(): truncate -s 100m img{1,2} mkfs.xfs -q -n version=ci img1 mkfs.xfs -q -n version=ci img2 mkdir -p /mnt/xfs mount img1 /mnt/xfs mkdir /mnt/xfs/sub1 mount img2 /mnt/xfs/sub1 cat > /mnt/xfs/sub1/foo & umount -l /mnt/xfs/sub1 mount img2 /mnt/xfs/sub1 mount --make-private /mnt/xfs mkdir /mnt/xfs/sub2 mount --move /mnt/xfs/sub1 /mnt/xfs/sub2 rmdir /mnt/xfs/sub1 Fix this by moving the check for an unlinked dentry out of the detach_mounts() path. Fixes: ff17fa561a04 ("d_invalidate(): unhash immediately") Cc: stable@vger.kernel.org Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> 12 November 2018, 07:02:34 UTC
4d47d64 Kan Liang 19 October 2018, 17:04:19 UTC perf/x86/intel/uncore: Support CoffeeLake 8th CBOX Coffee Lake has 8 core products which has 8 Cboxes. The 8th CBOX is mapped into different MSR space. Increase the num_boxes to 8 to handle the new products. It will not impact the previous platforms, SkyLake, KabyLake and earlier CoffeeLake. Because the num_boxes will be recalculated in uncore_cpu_init and doesn't exceed the x86_max_cores. Introduce a new box flag bit to indicate the 8th CBOX. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20181019170419.378-2-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 12 November 2018, 04:03:26 UTC
c10a8de Kan Liang 19 October 2018, 17:04:18 UTC perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake. Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U, H, S processor lines. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20181019170419.378-1-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 12 November 2018, 04:03:24 UTC
c469933 Patrick Bellasi 05 November 2018, 14:53:58 UTC sched/fair: Fix cpu_util_wake() for 'execl' type workloads A ~10% regression has been reported for UnixBench's execl throughput test by Aaron Lu and Ye Xiaolong: https://lkml.org/lkml/2018/10/30/765 That test is pretty simple, it does a "recursive" execve() syscall on the same binary. Starting from the syscall, this sequence is possible: do_execve() do_execveat_common() __do_execve_file() sched_exec() select_task_rq_fair() <==| Task already enqueued find_idlest_cpu() find_idlest_group() capacity_spare_wake() <==| Functions not called from cpu_util_wake() | the wakeup path which means we can end up calling cpu_util_wake() not only from the "wakeup path", as its name would suggest. Indeed, the task doing an execve() syscall is already enqueued on the CPU we want to get the cpu_util_wake() for. The estimated utilization for a CPU computed in cpu_util_wake() was written under the assumption that function can be called only from the wakeup path. If instead the task is already enqueued, we end up with a utilization which does not remove the current task's contribution from the estimated utilization of the CPU. This will wrongly assume a reduced spare capacity on the current CPU and increase the chances to migrate the task on execve. The regression is tracked down to: commit d519329f72a6 ("sched/fair: Update util_est only on util_avg updates") because in that patch we turn on by default the UTIL_EST sched feature. However, the real issue is introduced by: commit f9be3e5961c5 ("sched/fair: Use util_est in LB and WU paths") Let's fix this by ensuring to always discount the task estimated utilization from the CPU's estimated utilization when the task is also the current one. The same benchmark of the bug report, executed on a dual socket 40 CPUs Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz machine, reports these "Execl Throughput" figures (higher the better): mainline : 48136.5 lps mainline+fix : 55376.5 lps which correspond to a 15% speedup. Moreover, since {cpu_util,capacity_spare}_wake() are not really only used from the wakeup path, let's remove this ambiguity by using a better matching name: {cpu_util,capacity_spare}_without(). Since we are at that, let's also improve the existing documentation. Reported-by: Aaron Lu <aaron.lu@intel.com> Reported-by: Ye Xiaolong <xiaolong.ye@intel.com> Tested-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Fixes: f9be3e5961c5 (sched/fair: Use util_est in LB and WU paths) Link: https://lore.kernel.org/lkml/20181025093100.GB13236@e110439-lin/ Signed-off-by: Ingo Molnar <mingo@kernel.org> 12 November 2018, 04:00:46 UTC
2c7645b Michael Ellerman 12 November 2018, 02:46:06 UTC selftests/powerpc: Fix wild_bctr test to work on ppc64 The selftest I recently added to test branching to an out-of-bounds NIP doesn't work on 64-bit big endian. It does fail but not in the right way. That is it SEGVs trying to load from the opd at BAD_NIP, but it never gets as far as branching to BAD_NIP. To fix it we need to create an opd which is reachable but which holds the bad address. Fixes: b7683fc66eba ("selftests/powerpc: Add a test of wild bctr") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 12 November 2018, 03:47:54 UTC
43c6494 Michael Ellerman 06 November 2018, 12:37:58 UTC powerpc/io: Fix the IO workarounds code to work with Radix Back in 2006 Ben added some workarounds for a misbehaviour in the Spider IO bridge used on early Cell machines, see commit 014da7ff47b5 ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these were made to be generic, ie. not tied specifically to Spider. The code stashes a token in the high bits (59-48) of virtual addresses used for IO (eg. returned from ioremap()). This works fine when using the Hash MMU, but when we're using the Radix MMU the bits used for the token overlap with some of the bits of the virtual address. This is because the maximum virtual address is larger with Radix, up to c00fffffffffffff, and in fact we use that high part of the address range for ioremap(), see RADIX_KERN_IO_START. As it happens the bits that are used overlap with the bits that differentiate an IO address vs a linear map address. If the resulting address lies outside the linear mapping we will crash (see below), if not we just corrupt memory. virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000 Unable to handle kernel paging request for data at address 0xc000000080000014 ... CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000 GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030 ^^^^ ... NIP [c000000000626c5c] .iowrite8+0xec/0x100 LR [c0000000006c992c] .vp_reset+0x2c/0x90 Call Trace: .pci_bus_read_config_dword+0xc4/0x120 (unreliable) .register_virtio_device+0x13c/0x1c0 .virtio_pci_probe+0x148/0x1f0 .local_pci_probe+0x68/0x140 .pci_device_probe+0x164/0x220 .really_probe+0x274/0x3b0 .driver_probe_device+0x80/0x170 .__driver_attach+0x14c/0x150 .bus_for_each_dev+0xb8/0x130 .driver_attach+0x34/0x50 .bus_add_driver+0x178/0x2f0 .driver_register+0x90/0x1a0 .__pci_register_driver+0x6c/0x90 .virtio_pci_driver_init+0x2c/0x40 .do_one_initcall+0x64/0x280 .kernel_init_freeable+0x36c/0x474 .kernel_init+0x24/0x160 .ret_from_kernel_thread+0x58/0x7c This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which enables this code is usually not enabled. It is only enabled when it's selected by PPC_CELL_NATIVE which is only selected by PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order to hit the bug you need to build a big endian kernel, with IBM Cell Blade support enabled, as well as Radix MMU support, and then boot that on Power9 using Radix MMU. Still we can fix the bug, so let's do that. We simply use fewer bits for the token, taking the union of the restrictions on the address from both Hash and Radix, we end up with 8 bits we can use for the token. The only user of the token is iowa_mem_find_bus() which only supports 8 token values, so 8 bits is plenty for that. Fixes: 566ca99af026 ("powerpc/mm/radix: Add dummy radix_enabled()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 12 November 2018, 02:22:10 UTC
c8b00bb Michael Ellerman 01 November 2018, 05:21:05 UTC powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel() With preempt enabled we see warnings in do_slb_fault(): BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u33:0/98 futex hash table entries: 4096 (order: 3, 524288 bytes) caller is do_slb_fault+0x204/0x230 CPU: 5 PID: 98 Comm: kworker/u33:0 Not tainted 4.19.0-rc3-gcc-7.3.1-00022-g1936f094e164 #138 Call Trace: dump_stack+0xb4/0x104 (unreliable) check_preemption_disabled+0x148/0x150 do_slb_fault+0x204/0x230 data_access_slb_common+0x138/0x180 This is caused by the get_paca() in slb_allocate_kernel(), which includes a call to debug_smp_processor_id(). slb_allocate_kernel() can only be called from do_slb_fault(), and in that path interrupts are hard disabled and so we can't be preempted, but we can't update the preempt flags (in thread_info) because that could cause an SLB fault. So just use local_paca which is safe and doesn't cause the warning. Fixes: 48e7b7695745 ("powerpc/64s/hash: Convert SLB miss handlers to C") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 12 November 2018, 02:22:10 UTC
ccda4af Linus Torvalds 11 November 2018, 23:12:31 UTC Linux 4.20-rc2 11 November 2018, 23:12:31 UTC
7a3765e Linus Torvalds 11 November 2018, 23:09:48 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "One last pull request before heading to Vancouver for LPC, here we have: 1) Don't forget to free VSI contexts during ice driver unload, from Victor Raj. 2) Don't forget napi delete calls during device remove in ice driver, from Dave Ertman. 3) Don't request VLAN tag insertion of ibmvnic device when SKB doesn't have VLAN tags at all. 4) IPV4 frag handling code has to accomodate the situation where two threads try to insert the same fragment into the hash table at the same time. From Eric Dumazet. 5) Relatedly, don't flow separate on protocol ports for fragmented frames, also from Eric Dumazet. 6) Memory leaks in qed driver, from Denis Bolotin. 7) Correct valid MTU range in smsc95xx driver, from Stefan Wahren. 8) Validate cls_flower nested policies properly, from Jakub Kicinski. 9) Clearing of stats counters in mc88e6xxx driver doesn't retain important bits in the G1_STATS_OP register causing the chip to hang. Fix from Andrew Lunn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) act_mirred: clear skb->tstamp on redirect net: dsa: mv88e6xxx: Fix clearing of stats counters tipc: fix link re-establish failure net: sched: cls_flower: validate nested enc_opts_policy to avoid warning net: mvneta: correct typo flow_dissector: do not dissect l4 ports for fragments net: qualcomm: rmnet: Fix incorrect assignment of real_dev net: aquantia: allow rx checksum offload configuration net: aquantia: invalid checksumm offload implementation net: aquantia: fixed enable unicast on 32 macvlan net: aquantia: fix potential IOMMU fault after driver unbind net: aquantia: synchronized flow control between mac/phy net: smsc95xx: Fix MTU range net: stmmac: Fix RX packet size > 8191 qed: Fix potential memory corruption qed: Fix SPQ entries not returned to pool in error flows qed: Fix blocking/unlimited SPQ entries leak qed: Fix memory/entry leak in qed_init_sp_request() inet: frags: better deal with smp races net: hns3: bugfix for not checking return value ... 11 November 2018, 23:09:48 UTC
e12e00e Linus Torvalds 11 November 2018, 22:57:55 UTC Merge tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix build errors in binrpm-pkg and bindeb-pkg targets - fix false positive matches in merge_config.sh - fix build version mismatch in deb-pkg target - fix dtbs_install handling in (bin)deb-pkg target - revert a commit that allows setlocalversion to write to source tree * tag 'kbuild-fixes-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: builddeb: Fix inclusion of dtbs in debian package Revert "scripts/setlocalversion: git: Make -dirty check more robust" kbuild: deb-pkg: fix too low build version number kconfig: merge_config: avoid false positive matches from comment lines kbuild: deb-pkg: fix bindeb-pkg breakage when O= is used kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used 11 November 2018, 22:57:55 UTC
63a42e1 Linus Torvalds 11 November 2018, 22:54:38 UTC Merge tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Several fixes to recent release (4.19, fixes tagged for stable) and other fixes" * tag 'for-4.20-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix missing delayed iputs on unmount Btrfs: fix data corruption due to cloning of eof block Btrfs: fix infinite loop on inode eviction after deduplication of eof block Btrfs: fix deadlock on tree root leaf when finding free extent btrfs: avoid link error with CONFIG_NO_AUTO_INLINE btrfs: tree-checker: Fix misleading group system information Btrfs: fix missing data checksums after a ranged fsync (msync) btrfs: fix pinned underflow after transaction aborted Btrfs: fix cur_offset in the error case for nocow 11 November 2018, 22:54:38 UTC
c140f8b Linus Torvalds 11 November 2018, 22:53:02 UTC Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes, mostly buffer and memory leaks on error return cleanup paths" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: missing !bh check in ext4_xattr_inode_write() ext4: fix buffer leak in __ext4_read_dirblock() on error path ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path ext4: fix buffer leak in ext4_xattr_move_to_block() on error path ext4: release bs.bh before re-using in ext4_xattr_block_find() ext4: fix buffer leak in ext4_xattr_get_block() on error path ext4: fix possible leak of s_journal_flag_rwsem in error path ext4: fix possible leak of sbi->s_group_desc_leak in error path ext4: remove unneeded brelse call in ext4_xattr_inode_update_ref() ext4: avoid possible double brelse() in add_new_gdb() on error path ext4: avoid buffer leak in ext4_orphan_add() after prior errors ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty() ext4: fix possible inode leak in the retry loop of ext4_resize_fs() ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing ext4: add missing brelse() update_backups()'s error path ext4: add missing brelse() add_new_gdb_meta_bg()'s error path ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path ext4: avoid potential extra brelse in setup_new_flex_group_blocks() 11 November 2018, 22:53:02 UTC
b6df7b6 Linus Torvalds 11 November 2018, 22:41:50 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes: - Cure the LDT remapping to user space on 5 level paging which ended up in the KASLR space - Remove LDT mapping before freeing the LDT pages - Make NFIT MCE handling more robust - Unbreak the VSMP build by removing the dependency on paravirt ops - Support broken PIT emulation on Microsoft hyperV - Don't trace vmware_sched_clock() to avoid tracer recursion - Remove -pipe from KBUILD CFLAGS which breaks clang and is also slower on GCC - Trivial coding style and typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/vmware: Do not trace vmware_sched_clock() x86/vsmp: Remove dependency on pv_irq_ops x86/ldt: Remove unused variable in map_ldt_struct() x86/ldt: Unmap PTEs for the slot before freeing LDT pages x86/mm: Move LDT remap out of KASLR region on 5-level paging acpi/nfit, x86/mce: Validate a MCE's address before using it acpi/nfit, x86/mce: Handle only uncorrectable machine checks x86/build: Remove -pipe from KBUILD_CFLAGS x86/hyper-v: Fix indentation in hv_do_fast_hypercall16() Documentation/x86: Fix typo in zero-page.txt x86/hyper-v: Enable PIT shutdown quirk clockevents/drivers/i8253: Add support for PIT shutdown quirk 11 November 2018, 22:41:50 UTC
655c6b9 Linus Torvalds 11 November 2018, 22:39:12 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A bunch of perf tooling fixes: - Make the Intel PT SQL viewer more robust - Make the Intel PT debug log more useful - Support weak groups in perf record so it's behaving the same way as perf stat - Display the LBR stats in callchain entries properly in perf top - Handle different PMu names with common prefix properlin in pert stat - Start syscall augmenting in perf trace. Preparation for architecture independent eBPF instrumentation of syscalls. - Fix build breakage in JVMTI perf lib - Fix arm64 tools build failure wrt smp_load_{acquire,release}" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Do not zero sample_id_all for group members perf tools: Fix undefined symbol scnprintf in libperf-jvmti.so perf beauty: Use SRCARCH, ARCH=x86_64 must map to "x86" to find the headers perf intel-pt: Add MTC and CYC timestamps to debug log perf intel-pt: Add more event information to debug log perf scripts python: exported-sql-viewer.py: Fix table find when table re-ordered perf scripts python: exported-sql-viewer.py: Add help window perf scripts python: exported-sql-viewer.py: Add Selected branches report perf scripts python: exported-sql-viewer.py: Fall back to /usr/local/lib/libxed.so perf top: Display the LBR stats in callchain entry perf stat: Handle different PMU names with common prefix perf record: Support weak groups perf evlist: Move perf_evsel__reset_weak_group into evlist perf augmented_syscalls: Start collecting pathnames in the BPF program perf trace: Fix setting of augmented payload when using eBPF + raw_syscalls perf trace: When augmenting raw_syscalls plug raw_syscalls:sys_exit too perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit} tools headers barrier: Fix arm64 tools build failure wrt smp_load_{acquire,release} 11 November 2018, 22:39:12 UTC
08b5278 Linus Torvalds 11 November 2018, 22:37:41 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Just the removal of a redundant call into the sched deadline overrun check" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Remove useless call to check_dl_overrun() 11 November 2018, 22:37:41 UTC
024d4d4 Linus Torvalds 11 November 2018, 22:33:00 UTC Merge branch 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two small scheduler fixes: - Take hotplug lock in sched_init_smp(). Technically not really required, but lockdep will complain other. - Trivial comment fix in sched/fair" * 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix a comment in task_numa_fault() sched/core: Take the hotplug lock in sched_init_smp() 11 November 2018, 22:33:00 UTC
1acf93c Linus Torvalds 11 November 2018, 22:18:10 UTC Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking build fix from Thomas Gleixner: "A single fix for a build fail with CONFIG_PROFILE_ALL_BRANCHES=y in the qspinlock code" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/qspinlock: Fix compile error 11 November 2018, 22:18:10 UTC
0b002cd Linus Torvalds 11 November 2018, 22:14:05 UTC Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "A couple of fixlets for the core: - Kernel doc function documentation fixes - Missing prototypes for weak watchdog functions" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: resource/docs: Complete kernel-doc style function documentation watchdog/core: Add missing prototypes for weak functions resource/docs: Fix new kernel-doc warnings 11 November 2018, 22:14:05 UTC
7236ead Eric Dumazet 11 November 2018, 00:22:29 UTC act_mirred: clear skb->tstamp on redirect If sch_fq is used at ingress, skbs that might have been timestamped by net_timestamp_set() if a packet capture is requesting timestamps could be delayed by arbitrary amount of time, since sch_fq time base is MONOTONIC. Fix this problem by moving code from sch_netem.c to act_mirred.c. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 November 2018, 18:21:31 UTC
a9049ff Andrew Lunn 10 November 2018, 23:41:10 UTC net: dsa: mv88e6xxx: Fix clearing of stats counters The mv88e6161 would sometime fail to probe with a timeout waiting for the switch to complete an operation. This operation is supposed to clear the statistics counters. However, due to a read/modify/write, without the needed mask, the operation actually carried out was more random, with invalid parameters, resulting in the switch not responding. We need to preserve the histogram mode bits, so apply a mask to keep them. Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 11 November 2018, 18:19:10 UTC
7ab412d Jon Maloy 10 November 2018, 22:30:24 UTC tipc: fix link re-establish failure When a link failure is detected locally, the link is reset, the flag link->in_session is set to false, and a RESET_MSG with the 'stopping' bit set is sent to the peer. The purpose of this bit is to inform the peer that this endpoint just is going down, and that the peer should handle the reception of this particular RESET message as a local failure. This forces the peer to accept another RESET or ACTIVATE message from this endpoint before it can re-establish the link. This again is necessary to ensure that link session numbers are properly exchanged before the link comes up again. If a failure is detected locally at the same time at the peer endpoint this will do the same, which is also a correct behavior. However, when receiving such messages, the endpoints will not distinguish between 'stopping' RESETs and ordinary ones when it comes to updating session numbers. Both endpoints will copy the received session number and set their 'in_session' flags to true at the reception, while they are still expecting another RESET from the peer before they can go ahead and re-establish. This is contradictory, since, after applying the validation check referred to below, the 'in_session' flag will cause rejection of all such messages, and the link will never come up again. We now fix this by not only handling received RESET/STOPPING messages as a local failure, but also by omitting to set a new session number and the 'in_session' flag in such cases. Fixes: 7ea817f4e832 ("tipc: check session number before accepting link protocol messages") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 11 November 2018, 18:03:38 UTC
d5615e4 Rob Herring 07 November 2018, 14:36:46 UTC builddeb: Fix inclusion of dtbs in debian package Commit 37c8a5fafa3b ("kbuild: consolidate Devicetree dtb build rules") moved the location of 'dtbs_install' target which caused dtbs to not be installed when building debian package with 'bindeb-pkg' target. Update the builddeb script to use the same logic that determines if there's a 'dtbs_install' target which is presence of the arch dts directory. Also, use CONFIG_OF_EARLY_FLATTREE instead of CONFIG_OF as that's a better indication of whether we are building dtbs. This commit will also have the side effect of installing dtbs on any arch that has dts files. Previously, it was dependent on whether the arch defined 'dtbs_install'. Fixes: 37c8a5fafa3b ("kbuild: consolidate Devicetree dtb build rules") Reported-by: Nuno Gonçalves <nunojpg@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 11 November 2018, 14:04:53 UTC
8ef14c2 Guenter Roeck 06 November 2018, 18:10:38 UTC Revert "scripts/setlocalversion: git: Make -dirty check more robust" This reverts commit 6147b1cf19651c7de297e69108b141fb30aa2349. The reverted patch results in attempted write access to the source repository, even if that repository is mounted read-only. Output from "strace git status -uno --porcelain": getcwd("/tmp/linux-test", 129) = 16 open("/tmp/linux-test/.git/index.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) = -1 EROFS (Read-only file system) While git appears to be able to handle this situation, a monitored build environment (such as the one used for Chrome OS kernel builds) may detect it and bail out with an access violation error. On top of that, the attempted write access suggests that git _will_ write to the file even if a build output directory is specified. Users may have the reasonable expectation that the source repository remains untouched in that situation. Fixes: 6147b1cf19651 ("scripts/setlocalversion: git: Make -dirty check more robust" Cc: Genki Sky <sky@genki.is> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 11 November 2018, 14:04:52 UTC
bbcde0a Masahiro Yamada 06 November 2018, 04:18:05 UTC kbuild: deb-pkg: fix too low build version number Since commit b41d920acff8 ("kbuild: deb-pkg: split generating packaging and build"), the build version of the kernel contained in a deb package is too low by 1. Prior to the bad commit, the kernel was built first, then the number in .version file was read out, and written into the debian control file. Now, the debian control file is created before the kernel is actually compiled, which is causing the version number mismatch. Let the mkdebian script pass KBUILD_BUILD_VERSION=${revision} to require the build system to use the specified version number. Fixes: b41d920acff8 ("kbuild: deb-pkg: split generating packaging and build") Reported-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Doug Smythies <dsmythies@telus.net> 11 November 2018, 14:04:52 UTC
6bbe438 Masahiro Yamada 05 November 2018, 08:19:36 UTC kconfig: merge_config: avoid false positive matches from comment lines The current SED_CONFIG_EXP could match to comment lines in config fragment files, especially when CONFIG_PREFIX_ is empty. For example, Buildroot uses empty prefixing; starting symbols with BR2_ is just convention. Make the sed expression more robust against false positives from comment lines. The new sed expression matches to only valid patterns. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> 11 November 2018, 14:04:51 UTC
97dc6c0 Rafael J. Wysocki 10 November 2018, 23:02:37 UTC Merge branch 'pm-cpuidle' * pm-cpuidle: ARM: cpuidle: Convert to use cpuidle_register|unregister() ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO 10 November 2018, 23:02:37 UTC
e255aee Linus Torvalds 10 November 2018, 19:32:14 UTC Merge tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty fixes for 4.20-rc2 One of these missed the original 4.19-final release, I missed that I hadn't done a pull request for it as it was in linux-next and my branch for a long time, that's my fault. The others are small, fixing some reported issues and finally fixing the termios mess for alpha so that glibc has a chance to implement some missing functionality that has been pending for many years now. All of these have been in linux-next with no reported issues" * tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout arch/alpha, termios: implement BOTHER, IBSHIFT and termios2 termios, tty/tty_baudrate.c: fix buffer overrun vt: fix broken display when running aptitude serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA 10 November 2018, 19:32:14 UTC
20ef6d0 Linus Torvalds 10 November 2018, 19:29:47 UTC Merge tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "drm: i915, amdgpu, sun4i, exynos and etnaviv fixes: - amdgpu has some display fixes, KFD ioctl fixes and a Vega20 bios interaction fix. - sun4i has some NULL checks added - i915 has a 32-bit system fix, LPE audio oops, and HDMI2.0 clock fixes. - Exynos has a 3 regression fixes (one frame counter, fbdev missing, dsi->panel check) - Etnaviv has a single fencing fix for GPU recovery" * tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm: (39 commits) drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder() drm/amd/display: Drop reusing drm connector for MST drm/amd/display: Cleanup MST non-atomic code workaround drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled drm/amd/powerplay: set a default fclk/gfxclk ratio drm/amdgpu/display/dce11: only enable FBC when selected drm/amdgpu/display/dm: handle FBC dc feature parameter drm/amdgpu/display/dc: add FBC to dc_config drm/amdgpu: add DC feature mask module parameter drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2) drm/amdgpu/vega20: add CLK base offset drm/amd/display: Stop leaking planes drm/amd/display: Fix misleading buffer information Revert "drm/amd/display: set backlight level limit to 1" drm/amd: Update atom_smu_info_v3_3 structure drm/i915: Fix ilk+ watermarks when disabling pipes drm/sun4i: tcon: prevent tcon->panel dereference if NULL drm/sun4i: tcon: fix check of tcon->panel null pointer drm/i915: Don't oops during modeset shutdown after lpe audio deinit drm/i915: Mark pin flags as u64 ... 10 November 2018, 19:29:47 UTC
1de4f2e Linus Torvalds 10 November 2018, 19:27:58 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "I believe all of these are simple obviously correct bug fixes. These fall into two groups: - Fixing the implementation of MNT_LOCKED which prevents lesser privileged users from seeing unders mounts created by more privileged users. - Fixing the extended uid and group mapping in user namespaces. As well as ensuring the code looks correct I have spot tested these changes as well and in my testing the fixes are working" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: mount: Prevent MNT_DETACH from disconnecting locked mounts mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts mount: Retest MNT_LOCKED in do_umount userns: also map extents in the reverse map to kernel IDs 10 November 2018, 19:27:58 UTC
a1aa42f Linus Torvalds 10 November 2018, 19:25:55 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A small set of fixes for clk drivers. One to fix a DT refcount imbalance, two to mark some Amlogic clks as critical, and one final one that fixes a clk name for the Qualcomm driver merged this cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Fix board clock node name clk: meson: axg: mark fdiv2 and fdiv3 as critical clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL clk: fixed-factor: fix of_node_get-put imbalance 10 November 2018, 19:25:55 UTC
73b6f96 Dave Airlie 10 November 2018, 18:20:48 UTC Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Fixes for 4.20: - DC MST fixes - DC FBC fix - Vega20 updates to support the latest vbios - KFD type fixes for ioctl headers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108035551.2904-1-alexander.deucher@amd.com 10 November 2018, 18:23:02 UTC
d10cf6d Dave Airlie 10 November 2018, 18:19:52 UTC Merge tag 'drm-misc-fixes-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - sun4i: tcon->panel NULL deref protections (Giulio) Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181107205051.GA27823@art_vandelay 10 November 2018, 18:20:01 UTC
7d588f9 Dave Airlie 10 November 2018, 18:14:22 UTC Merge tag 'drm-intel-fixes-2018-11-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Bugzilla #108282 fixed: Avoid graphics corruption on 32-bit systems for Mesa 18.2.x Avoid OOPS on LPE audio deinit. Remove two unused W/As. Fix to correct HDMI 2.0 audio clock modes to spec. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108134508.GA28466@jlahtine-desk.ger.corp.intel.com 10 November 2018, 18:14:23 UTC
63c8299 Jakub Kicinski 10 November 2018, 05:06:26 UTC net: sched: cls_flower: validate nested enc_opts_policy to avoid warning TCA_FLOWER_KEY_ENC_OPTS and TCA_FLOWER_KEY_ENC_OPTS_MASK can only currently contain further nested attributes, which are parsed by hand, so the policy is never actually used resulting in a W=1 build warning: net/sched/cls_flower.c:492:1: warning: ‘enc_opts_policy’ defined but not used [-Wunused-const-variable=] enc_opts_policy[TCA_FLOWER_KEY_ENC_OPTS_MAX + 1] = { Add the validation anyway to avoid potential bugs when other attributes are added and to make the attribute structure slightly more clear. Validation will also set extact to point to bad attribute on error. Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 November 2018, 17:55:30 UTC
2121db0 Dan Williams 04 November 2018, 00:53:09 UTC Revert "acpi, nfit: Further restrict userspace ARS start requests" The following lockdep splat results from acquiring the init_mutex in acpi_nfit_clear_to_send(): WARNING: possible circular locking dependency detected lt-daxdev-error/7216 is trying to acquire lock: 00000000f694db15 (&acpi_desc->init_mutex){+.+.}, at: acpi_nfit_clear_to_send+0x27/0x80 [nfit] but task is already holding lock: 00000000182298f2 (&nvdimm_bus->reconfig_mutex){+.+.}, at: __nd_ioctl+0x457/0x610 [libnvdimm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&nvdimm_bus->reconfig_mutex){+.+.}: nvdimm_badblocks_populate+0x41/0x150 [libnvdimm] nd_region_notify+0x95/0xb0 [libnvdimm] nd_device_notify+0x40/0x50 [libnvdimm] ars_complete+0x7f/0xd0 [nfit] acpi_nfit_scrub+0xbb/0x410 [nfit] process_one_work+0x22b/0x5c0 worker_thread+0x3c/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 -> #0 (&acpi_desc->init_mutex){+.+.}: __mutex_lock+0x83/0x980 acpi_nfit_clear_to_send+0x27/0x80 [nfit] __nd_ioctl+0x474/0x610 [libnvdimm] nd_ioctl+0xa4/0xb0 [libnvdimm] do_vfs_ioctl+0xa5/0x6e0 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe New infrastructure is needed to be able to perform this check without acquiring the lock. Fixes: 594861215c83 ("acpi, nfit: Further restrict userspace ARS start") Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 10 November 2018, 17:54:28 UTC
3fa58dc Dan Williams 01 November 2018, 07:30:22 UTC acpi, nfit: Fix ARS overflow continuation When the platform BIOS is unable to report all the media error records it requires the OS to restart the scrub at a prescribed location. The driver detects the overflow condition, but then fails to report it to the ARS state machine after reaping the records. Propagate -ENOSPC correctly to continue the ARS operation. Cc: <stable@vger.kernel.org> Fixes: 1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue") Reported-by: Jacek Zloch <jacek.zloch@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 10 November 2018, 17:54:28 UTC
de7b75d Jens Axboe 09 November 2018, 22:58:40 UTC floppy: fix race condition in __floppy_read_block_0() LKP recently reported a hang at bootup in the floppy code: [ 245.678853] INFO: task mount:580 blocked for more than 120 seconds. [ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1 #1 [ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 245.682181] mount D 6372 580 1 0x00000004 [ 245.683023] Call Trace: [ 245.683425] __schedule+0x2df/0x570 [ 245.683975] schedule+0x2d/0x80 [ 245.684476] schedule_timeout+0x19d/0x330 [ 245.685090] ? wait_for_common+0xa5/0x170 [ 245.685735] wait_for_common+0xac/0x170 [ 245.686339] ? do_sched_yield+0x90/0x90 [ 245.686935] wait_for_completion+0x12/0x20 [ 245.687571] __floppy_read_block_0+0xfb/0x150 [ 245.688244] ? floppy_resume+0x40/0x40 [ 245.688844] floppy_revalidate+0x20f/0x240 [ 245.689486] check_disk_change+0x43/0x60 [ 245.690087] floppy_open+0x1ea/0x360 [ 245.690653] __blkdev_get+0xb4/0x4d0 [ 245.691212] ? blkdev_get+0x1db/0x370 [ 245.691777] blkdev_get+0x1f3/0x370 [ 245.692351] ? path_put+0x15/0x20 [ 245.692871] ? lookup_bdev+0x4b/0x90 [ 245.693539] blkdev_get_by_path+0x3d/0x80 [ 245.694165] mount_bdev+0x2a/0x190 [ 245.694695] squashfs_mount+0x10/0x20 [ 245.695271] ? squashfs_alloc_inode+0x30/0x30 [ 245.695960] mount_fs+0xf/0x90 [ 245.696451] vfs_kern_mount+0x43/0x130 [ 245.697036] do_mount+0x187/0xc40 [ 245.697563] ? memdup_user+0x28/0x50 [ 245.698124] ksys_mount+0x60/0xc0 [ 245.698639] sys_mount+0x19/0x20 [ 245.699167] do_int80_syscall_32+0x61/0x130 [ 245.699813] entry_INT80_32+0xc7/0xc7 showing that we never complete that read request. The reason is that the completion setup is racy - it initializes the completion event AFTER submitting the IO, which means that the IO could complete before/during the init. If it does, we are passing garbage to complete() and we may sleep forever waiting for the event to occur. Fixes: 7b7b68bba5ef ("floppy: bail out in open() if drive is not responding to block0 read") Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 10 November 2018, 15:16:12 UTC
ab6e1f3 Linus Torvalds 10 November 2018, 14:58:48 UTC Merge tag 'for-linus-4.20a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Several fixes, mostly for rather recent regressions when running under Xen" * tag 'for-linus-4.20a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: remove size limit of privcmd-buf mapping interface xen: fix xen_qlock_wait() x86/xen: fix pv boot xen-blkfront: fix kernel panic with negotiate_mq error path xen/grant-table: Fix incorrect gnttab_dma_free_pages() pr_debug message CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM 10 November 2018, 14:58:48 UTC
35c5568 Linus Torvalds 10 November 2018, 13:07:21 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix occasional page fault during boot due to memblock resizing before the linear map is up. - Define NET_IP_ALIGN to 0 to improve the DMA performance on some platforms. - lib/raid6 test build fix. - .mailmap update for Punit Agrawal * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: memblock: don't permit memblock resizing until linear mapping is up arm64: mm: define NET_IP_ALIGN to 0 lib/raid6: Fix arm64 test build mailmap: Update email for Punit Agrawal 10 November 2018, 13:07:21 UTC
d5335b3 Linus Torvalds 10 November 2018, 12:57:34 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has one bugfix (qcom-geni driver), one arch enablement (i2c-omap driver, no code change), and a new driver (nvidia-gpu) this time" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: usb: typec: ucsi: add support for Cypress CCGx i2c: nvidia-gpu: make pm_ops static i2c: add i2c bus driver for NVIDIA GPU i2c: qcom-geni: Fix runtime PM mismatch with child devices MAINTAINERS: Add entry for i2c-omap driver i2c: omap: Enable for ARCH_K3 dt-bindings: i2c: omap: Add new compatible for AM654 SoCs 10 November 2018, 12:57:34 UTC
fbd1d52 Alexandre Belloni 09 November 2018, 16:37:20 UTC net: mvneta: correct typo The reserved variable should be named reserved1. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 November 2018, 04:10:13 UTC
6223071 배석진 10 November 2018, 00:53:06 UTC flow_dissector: do not dissect l4 ports for fragments Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed3741 ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: 배석진 <soukjin.bae@samsung.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 10 November 2018, 04:01:21 UTC
d02854d Subash Abhinov Kasiviswanathan 10 November 2018, 01:56:27 UTC net: qualcomm: rmnet: Fix incorrect assignment of real_dev A null dereference was observed when a sysctl was being set from userspace and rmnet was stuck trying to complete some actions in the NETDEV_REGISTER callback. This is because the real_dev is set only after the device registration handler completes. sysctl call stack - <6> Unable to handle kernel NULL pointer dereference at virtual address 00000108 <2> pc : rmnet_vnd_get_iflink+0x1c/0x28 <2> lr : dev_get_iflink+0x2c/0x40 <2> rmnet_vnd_get_iflink+0x1c/0x28 <2> inet6_fill_ifinfo+0x15c/0x234 <2> inet6_ifinfo_notify+0x68/0xd4 <2> ndisc_ifinfo_sysctl_change+0x1b8/0x234 <2> proc_sys_call_handler+0xac/0x100 <2> proc_sys_write+0x3c/0x4c <2> __vfs_write+0x54/0x14c <2> vfs_write+0xcc/0x188 <2> SyS_write+0x60/0xc0 <2> el0_svc_naked+0x34/0x38 device register call stack - <2> notifier_call_chain+0x84/0xbc <2> raw_notifier_call_chain+0x38/0x48 <2> call_netdevice_notifiers_info+0x40/0x70 <2> call_netdevice_notifiers+0x38/0x60 <2> register_netdevice+0x29c/0x3d8 <2> rmnet_vnd_newlink+0x68/0xe8 <2> rmnet_newlink+0xa0/0x160 <2> rtnl_newlink+0x57c/0x6c8 <2> rtnetlink_rcv_msg+0x1dc/0x328 <2> netlink_rcv_skb+0xac/0x118 <2> rtnetlink_rcv+0x24/0x30 <2> netlink_unicast+0x158/0x1f0 <2> netlink_sendmsg+0x32c/0x338 <2> sock_sendmsg+0x44/0x60 <2> SyS_sendto+0x150/0x1ac <2> el0_svc_naked+0x34/0x38 Fixes: b752eff5be24 ("net: qualcomm: rmnet: Implement ndo_get_iflink") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> 10 November 2018, 03:45:48 UTC
dd63c3e David S. Miller 09 November 2018, 23:38:11 UTC Merge branch 'aquantia-fixes' Igor Russkikh says: ==================== net: aquantia: 2018-11 bugfixes The patchset fixes a number of bugs found in various areas after driver validation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 23:38:11 UTC
bbb67a4 Dmitry Bogdanov 09 November 2018, 11:54:03 UTC net: aquantia: allow rx checksum offload configuration RX Checksum offloads could not be configured and ignored netdev features flag for checksumming. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 23:38:10 UTC
ad703c2 Dmitry Bogdanov 09 November 2018, 11:54:01 UTC net: aquantia: invalid checksumm offload implementation Packets with marked invalid IP/UDP/TCP checksums were considered as good by the driver. The error was in a logic, processing offload bits in RX descriptor. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 23:38:10 UTC
bfaa9f8 Igor Russkikh 09 November 2018, 11:53:59 UTC net: aquantia: fixed enable unicast on 32 macvlan Fixed a condition mistake due to which macvlans unicast item number 32 was not added in the unicast filter. The consequence is that when exactly 32 macvlans are created on NIC, the last created macvlan receives no traffic because its MAC was not registered in HW. Fixes: 94b3b542303f ("net: aquantia: vlan unicast address list correct handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 23:38:10 UTC
7a1bb49 Dmitry Bogdanov 09 November 2018, 11:53:57 UTC net: aquantia: fix potential IOMMU fault after driver unbind IOMMU fault may occurr on unbind/bind or if_down/if_up sequence. Although driver disables the rings on down, this is not enough. Due to internal HW design, during subsequent initialization NIC sometimes may reuse RX descriptors cache and write to the host memory from the descriptor cache. That's get catched by IOMMU on host. This patch invalidates the descriptor cache in NIC on interface down to prevent writing to the cached descriptors and to the memory pointed in those descriptors. Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 23:38:10 UTC
35e8e8b Igor Russkikh 09 November 2018, 11:53:56 UTC net: aquantia: synchronized flow control between mac/phy Flow control statuses were not synchronized between blocks, that caused packets/link drop on some corner cases, when MAC sent PFC although Phy was not expecting these to come. Driver should readout the negotiated FC from phy and configure RX block accordigly. This is done on each link change event with information from FW. Fixes: 288551de45aa ("net: aquantia: Implement rx/tx flow control ethtools callback") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 23:38:10 UTC
aa4330e Linus Torvalds 09 November 2018, 22:41:58 UTC Merge tag 'devicetree-fixes-for-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: - Add validation of NUMA distance map to prevent crashes with bad map - Fix setting of dma_mask * tag 'devicetree-fixes-for-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of, numa: Validate some distance map rules of/device: Really only set bus DMA mask when appropriate 09 November 2018, 22:41:58 UTC
dc5db21 Linus Torvalds 09 November 2018, 22:31:51 UTC Merge tag 'for-linus-20181109' of git://git.kernel.dk/linux-block Pull block layer fixes from Jens Axboe: - Two fixes for an ubd regression, one for missing locking, and one for a missing initialization of a field. The latter was an old latent bug, but it's now visible and triggers (Me, Anton Ivanov) - Set of NVMe fixes via Christoph, but applied manually due to a git tree mixup (Christoph, Sagi) - Fix for a discard split regression, in three patches (Ming) - Update libata git trees (Geert) - SPDX identifier for sata_rcar (Kuninori Morimoto) - Virtual boundary merge fix (Johannes) - Preemptively clear memory we are going to pass to userspace, in case the driver does a short read (Keith) * tag 'for-linus-20181109' of git://git.kernel.dk/linux-block: block: make sure writesame bio is aligned with logical block size block: cleanup __blkdev_issue_discard() block: make sure discard bio is aligned with logical block size Revert "nvmet-rdma: use a private workqueue for delete" nvme: make sure ns head inherits underlying device limits nvmet: don't try to add ns to p2p map unless it actually uses it sata_rcar: convert to SPDX identifiers ubd: fix missing initialization of io_req block: Clear kernel memory before copying to user MAINTAINERS: Fix remaining pointers to obsolete libata.git ubd: fix missing lock around request issue block: respect virtual boundary mask in bvecs 09 November 2018, 22:31:51 UTC
d757a3b Linus Torvalds 09 November 2018, 22:26:18 UTC Merge tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client Pull Ceph fixes from Ilya Dryomov: "Two CephFS fixes (copy_file_range and quota) and a small feature bit cleanup" * tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client: libceph: assume argonaut on the server side ceph: quota: fix null pointer dereference in quota check ceph: add destination file data sync before doing any remote copy 09 November 2018, 22:26:18 UTC
26eaed4 Linus Torvalds 09 November 2018, 22:21:24 UTC Merge tag 'mips_fixes_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A couple of small MIPS fixes for 4.20: - Extend an array to avoid overruns on some Octeon hardware, fixing a bug introduced in 4.3. - Fix a coherent DMA regression for systems without cache-coherent DMA introduced in the 4.20 merge window" * tag 'mips_fixes_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Fix `dma_alloc_coherent' returning a non-coherent allocation MIPS: OCTEON: fix out of bounds array access on CN68XX 09 November 2018, 22:21:24 UTC
1aefa98 Vinod Koul 09 November 2018, 09:50:54 UTC clk: qcom: gcc: Fix board clock node name Device tree node name are not supposed to have "_" in them so fix the node name use of xo_board to xo-board Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 09 November 2018, 22:13:55 UTC
1503538 Steven Rostedt (VMware) 09 November 2018, 20:22:07 UTC x86/cpu/vmware: Do not trace vmware_sched_clock() When running function tracing on a Linux guest running on VMware Workstation, the guest would crash. This is due to tracing of the sched_clock internal call of the VMware vmware_sched_clock(), which causes an infinite recursion within the tracing code (clock calls must not be traced). Make vmware_sched_clock() not traced by ftrace. Fixes: 80e9a4f21fd7c ("x86/vmware: Add paravirt sched clock") Reported-by: GwanYeong Kim <gy741.kim@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Alok Kataria <akataria@vmware.com> CC: GwanYeong Kim <gy741.kim@gmail.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org CC: Thomas Gleixner <tglx@linutronix.de> CC: virtualization@lists.linux-foundation.org CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181109152207.4d3e7d70@gandalf.local.home 09 November 2018, 20:39:14 UTC
247c554 Ajay Gupta 26 October 2018, 16:36:59 UTC usb: typec: ucsi: add support for Cypress CCGx Latest NVIDIA GPU cards have a Cypress CCGx Type-C controller over I2C interface. This UCSI I2C driver uses I2C bus driver interface for communicating with Type-C controller. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 09 November 2018, 17:49:59 UTC
641a41d Yoshihiro Shimoda 30 October 2018, 06:13:35 UTC serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 09 November 2018, 17:34:50 UTC
23d8003 Stanislav Lisovskiy 09 November 2018, 09:00:12 UTC drm/dp_mst: Check if primary mstb is null Unfortunately drm_dp_get_mst_branch_device which is called from both drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely on that mgr->mst_primary is not NULL, which seem to be wrong as it can be cleared with simultaneous mode set, if probing fails or in other case. mgr->lock mutex doesn't protect against that as it might just get assigned to NULL right before, not simultaneously. There are currently bugs 107738, 108616 bugs which crash in drm_dp_get_mst_branch_device, caused by this issue. v2: Refactored the code, as it was nicely noticed. Fixed Bugzilla bug numbers(second was 108616, but not 108816) and added links. [changed title and added stable cc] Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738 Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com 09 November 2018, 17:27:25 UTC
caccdcc Wolfram Sang 09 November 2018, 16:54:38 UTC i2c: nvidia-gpu: make pm_ops static sparse rightfully says: warning: symbol 'gpu_i2c_driver_pm' was not declared. Should it be static? Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 09 November 2018, 16:56:44 UTC
c71bcdc Ajay Gupta 26 October 2018, 16:36:58 UTC i2c: add i2c bus driver for NVIDIA GPU Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 09 November 2018, 16:46:43 UTC
eb6984f Vasily Averin 09 November 2018, 16:34:40 UTC ext4: missing !bh check in ext4_xattr_inode_write() According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write() should not return bh = NULL The only time that bh could be NULL, then, would be in the case of something really going wrong; a programming error elsewhere (perhaps a wild pointer dereference) or I/O error causing on-disk file system corruption (although that would be highly unlikely given that we had *just* allocated the blocks and so the metadata blocks in question probably would still be in the cache). Fixes: e50e5129f384 ("ext4: xattr-in-inode support") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.13 09 November 2018, 16:34:40 UTC
848bd3f Stephen Boyd 02 November 2018, 20:57:32 UTC i2c: qcom-geni: Fix runtime PM mismatch with child devices We need to enable runtime PM on this i2c controller before populating child devices with i2c_add_adapter(). Otherwise, if a child device uses runtime PM and stays runtime PM enabled we'll get the following warning at boot. Enabling runtime PM for inactive device (a98000.i2c) with active children [...] Call trace: pm_runtime_enable+0xd8/0xf8 geni_i2c_probe+0x440/0x460 platform_drv_probe+0x74/0xc8 [...] Let's move the runtime PM enabling and setup to before we add the adapter, so that this device can respond to runtime PM requests from children. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 09 November 2018, 16:25:48 UTC
350784e Vignesh R 09 November 2018, 11:14:12 UTC MAINTAINERS: Add entry for i2c-omap driver Add separate entry for i2c-omap and add my name as maintainer for this driver. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 09 November 2018, 16:25:48 UTC
5b27740 Vignesh R 09 November 2018, 11:14:11 UTC i2c: omap: Enable for ARCH_K3 Allow I2C_OMAP to be built for K3 platforms. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 09 November 2018, 16:25:29 UTC
ab214c4 Vignesh R 09 November 2018, 11:14:10 UTC dt-bindings: i2c: omap: Add new compatible for AM654 SoCs AM654 SoCs have same I2C IP as OMAP SoCs. Add new compatible to handle AM654 SoCs. While at that reformat the existing compatible list for older SoCs to list one valid compatible per line. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 09 November 2018, 16:25:21 UTC
3941552 Juergen Gross 01 November 2018, 12:33:07 UTC xen: remove size limit of privcmd-buf mapping interface Currently the size of hypercall buffers allocated via /dev/xen/hypercall is limited to a default of 64 memory pages. For live migration of guests this might be too small as the page dirty bitmask needs to be sized according to the size of the guest. This means migrating a 8GB sized guest is already exhausting the default buffer size for the dirty bitmap. There is no sensible way to set a sane limit, so just remove it completely. The device node's usage is limited to root anyway, so there is no additional DOS scenario added by allowing unlimited buffers. While at it make the error path for the -ENOMEM case a little bit cleaner by setting n_pages to the number of successfully allocated pages instead of the target size. Fixes: c51b3c639e01f2 ("xen: add new hypercall buffer mapping device") Cc: <stable@vger.kernel.org> #4.18 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> 09 November 2018, 15:38:34 UTC
d3132b3 Juergen Gross 08 November 2018, 07:35:06 UTC xen: fix xen_qlock_wait() Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable") introduced a regression for Xen guests running fully virtualized (HVM or PVH mode). The Xen hypervisor wouldn't return from the poll hypercall with interrupts disabled in case of an interrupt (for PV guests it does). So instead of disabling interrupts in xen_qlock_wait() use a nesting counter to avoid calling xen_clear_irq_pending() in case xen_qlock_wait() is nested. Fixes: a856531951dc80 ("xen: make xen_qlock_wait() nestable") Cc: stable@vger.kernel.org Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> 09 November 2018, 15:37:27 UTC
ebacb81 Lukas Czerner 09 November 2018, 13:51:46 UTC fuse: fix use-after-free in fuse_direct_IO() In async IO blocking case the additional reference to the io is taken for it to survive fuse_aio_complete(). In non blocking case this additional reference is not needed, however we still reference io to figure out whether to wait for completion or not. This is wrong and will lead to use-after-free. Fix it by storing blocking information in separate variable. This was spotted by KASAN when running generic/208 fstest. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 744742d692e3 ("fuse: Add reference counting for fuse_io_priv") Cc: <stable@vger.kernel.org> # v4.6 09 November 2018, 14:52:17 UTC
2d84a2d Miklos Szeredi 09 November 2018, 14:52:16 UTC fuse: fix possibly missed wake-up after abort In current fuse_drop_waiting() implementation it's possible that fuse_wait_aborted() will not be woken up in the unlikely case that fuse_abort_conn() + fuse_wait_aborted() runs in between checking fc->connected and calling atomic_dec(&fc->num_waiting). Do the atomic_dec_and_test() unconditionally, which also provides the necessary barrier against reordering with the fc->connected check. The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE barrier after resetting fc->connected. However, this is not a performance sensitive path, and adding the explicit barrier makes it easier to document. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests") Cc: <stable@vger.kernel.org> #v4.19 09 November 2018, 14:52:16 UTC
7fabaf3 Miklos Szeredi 09 November 2018, 14:52:16 UTC fuse: fix leaked notify reply fuse_request_send_notify_reply() may fail if the connection was reset for some reason (e.g. fs was unmounted). Don't leak request reference in this case. Besides leaking memory, this resulted in fc->num_waiting not being decremented and hence fuse_wait_aborted() left in a hanging and unkillable state. Fixes: 2d45ba381a74 ("fuse: add retrieve request") Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests") Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> #v2.6.36 09 November 2018, 14:52:16 UTC
34ffec6 Ming Lei 29 October 2018, 12:57:19 UTC block: make sure writesame bio is aligned with logical block size Obviously the created writesame bio has to be aligned with logical block size, and use bio_allowed_max_sectors() to retrieve this number. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: b49a0871be31a745b2ef ("block: remove split code in blkdev_issue_{discard,write_same}") Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 November 2018, 13:23:18 UTC
ba5d738 Ming Lei 29 October 2018, 12:57:18 UTC block: cleanup __blkdev_issue_discard() Cleanup __blkdev_issue_discard() a bit: - remove local variable of 'end_sect' - remove code block of 'fail' Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 November 2018, 13:23:16 UTC
1adfc5e Ming Lei 29 October 2018, 12:57:17 UTC block: make sure discard bio is aligned with logical block size Obviously the created discard bio has to be aligned with logical block size. This patch introduces the helper of bio_allowed_max_sectors() for this purpose. Cc: stable@vger.kernel.org Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Xiao Ni <xni@redhat.com> Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Fixes: 744889b7cbb56a6 ("block: don't deal with discard limit in blkdev_issue_discard()") Fixes: a22c4d7e34402cc ("block: re-add discard_granularity and alignment checks") Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 November 2018, 13:23:14 UTC
d39aa49 Christoph Hellwig 07 November 2018, 08:20:25 UTC Revert "nvmet-rdma: use a private workqueue for delete" This reverts commit 2acf70ade79d26b97611a8df52eb22aa33814cd4. The commit never really fixed the intended issue and caused all kinds of other issues, including a use before initialization. Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 November 2018, 13:14:47 UTC
8f676b8 Sagi Grimberg 02 November 2018, 18:22:13 UTC nvme: make sure ns head inherits underlying device limits Whenever we update ns_head info, we need to make sure it is still compatible with all underlying backing devices because although nvme multipath doesn't have any explicit use of these limits, other devices can still be stacked on top of it which may rely on the underlying limits. Start with unlimited stacking limits, and every info update iterate over siblings and adjust queue limits. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 November 2018, 13:14:47 UTC
21d3bbd Sagi Grimberg 02 November 2018, 23:12:21 UTC nvmet: don't try to add ns to p2p map unless it actually uses it Even without CONFIG_P2PDMA this results in a error print: nvmet: no peer-to-peer memory is available that's supported by rxe0 and /dev/nullb0 Fixes: c6925093d0b2 ("nvmet: Optionally use PCI P2P memory") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 November 2018, 13:14:47 UTC
3541833 Linus Torvalds 09 November 2018, 12:30:44 UTC Merge tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A fix for the pgtable_bytes misaccounting on s390. The patch changes common code part in regard to page table folding and adds extra checks to mm_[inc|dec]_nr_[pmds|puds]. - Add FORCE for all build targets using if_changed - Use non-loadable phdr for the .vmlinux.info section to avoid a segment overlap that confuses kexec - Cleanup the attribute definition for the diagnostic sampling - Increase stack size for CONFIG_KASAN=y builds - Export __node_distance to fix a build error - Correct return code of a PMU event init function - An update for the default configs * tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/perf: Change CPUM_CF return code in event init function s390: update defconfigs s390/mm: Fix ERROR: "__node_distance" undefined! s390/kasan: increase instrumented stack size to 64k s390/cpum_sf: Rework attribute definition for diagnostic sampling s390/mm: fix mis-accounting of pgtable_bytes mm: add mm_pxd_folded checks to pgtable_bytes accounting functions mm: introduce mm_[p4d|pud|pmd]_folded mm: make the __PAGETABLE_PxD_FOLDED defines non-empty s390: avoid vmlinux segments overlap s390/vdso: add missing FORCE to build targets s390/decompressor: add missing FORCE to build targets 09 November 2018, 12:30:44 UTC
e7445ce Andreas Gruenbacher 08 November 2018, 20:14:29 UTC gfs2: Fix metadata read-ahead during truncate (2) The previous attempt to fix for metadata read-ahead during truncate was incorrect: for files with a height > 2 (1006989312 bytes with a block size of 4096 bytes), read-ahead requests were not being issued for some of the indirect blocks discovered while walking the metadata tree, leading to significant slow-downs when deleting large files. Fix that. In addition, only issue read-ahead requests in the first pass through the meta-data tree, while deallocating data blocks. Fixes: c3ce5aa9b0 ("gfs2: Fix metadata read-ahead during truncate") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 09 November 2018, 10:55:33 UTC
10283ea Andreas Gruenbacher 05 November 2018, 22:57:24 UTC gfs2: Put bitmap buffers in put_super gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects attached to the resource group glocks. That function should release the buffers attached to the gfs2_bitmap objects (bi_bh), but the call to gfs2_rgrp_brelse for doing that is missing. When gfs2_releasepage later runs across these buffers which are still referenced, it refuses to free them. This causes the pages the buffers are attached to to remain referenced as well. With enough mount/unmount cycles, the system will eventually run out of memory. Fix this by adding the missing call to gfs2_rgrp_brelse in gfs2_clear_rgrpd. (Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.) Fixes: 39b0f1e92908 ("GFS2: Don't brelse rgrp buffer_heads every allocation") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 09 November 2018, 10:55:27 UTC
595b067 Andy Shevchenko 05 November 2018, 16:33:34 UTC MAINTAINERS: Add tree link for Intel pin control driver Intel pin control driver gets its own tree. Update MAINTAINERS accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 09 November 2018, 10:36:51 UTC
9f4debe Corentin Labbe 03 November 2018, 21:56:01 UTC crypto: user - Zeroize whole structure given to user space For preventing uninitialized data to be given to user-space (and so leak potential useful data), the crypto_stat structure must be correctly initialized. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: cac5818c25d0 ("crypto: user - Implement a generic crypto statistics") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> [EB: also fix it in crypto_reportstat_one()] [EB: use sizeof(var) rather than sizeof(type)] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 09 November 2018, 09:35:43 UTC
f43f399 Eric Biggers 03 November 2018, 21:56:00 UTC crypto: user - fix leaking uninitialized memory to userspace All bytes of the NETLINK_CRYPTO report structures must be initialized, since they are copied to userspace. The change from strncpy() to strlcpy() broke this. As a minimal fix, change it back. Fixes: 4473710df1f8 ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 09 November 2018, 09:35:43 UTC
508a1c4 Ard Biesheuvel 08 November 2018, 22:55:16 UTC crypto: simd - correctly take reqsize of wrapped skcipher into account The simd wrapper's skcipher request context structure consists of a single subrequest whose size is taken from the subordinate skcipher. However, in simd_skcipher_init(), the reqsize that is retrieved is not from the subordinate skcipher but from the cryptd request structure, whose size is completely unrelated to the actual wrapped skcipher. Reported-by: Qian Cai <cai@gmx.us> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Qian Cai <cai@gmx.us> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 09 November 2018, 09:35:43 UTC
0b0cf6a John Garry 05 November 2018, 12:35:15 UTC crypto: hisilicon - Fix reference after free of memories on error path coccicheck currently warns of the following issues in the driver: drivers/crypto/hisilicon/sec/sec_algs.c:864:51-66: ERROR: reference preceded by free on line 812 drivers/crypto/hisilicon/sec/sec_algs.c:864:40-49: ERROR: reference preceded by free on line 813 drivers/crypto/hisilicon/sec/sec_algs.c:861:8-24: ERROR: reference preceded by free on line 814 drivers/crypto/hisilicon/sec/sec_algs.c:860:41-51: ERROR: reference preceded by free on line 815 drivers/crypto/hisilicon/sec/sec_algs.c:867:7-18: ERROR: reference preceded by free on line 816 It would appear than on certain error paths that we may attempt reference- after-free some memories. This patch fixes those issues. The solution doesn't look perfect, but having same memories free'd possibly from separate functions makes it tricky. Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 09 November 2018, 09:35:43 UTC
68a031d John Garry 05 November 2018, 12:35:14 UTC crypto: hisilicon - Fix NULL dereference for same dst and src When the source and destination addresses for the cipher are the same, we will get a NULL dereference from accessing the split destination scatterlist memories, as shown: [ 56.565719] tcrypt: [ 56.565719] testing speed of async ecb(aes) (hisi_sec_aes_ecb) encryption [ 56.574683] tcrypt: test 0 (128 bit key, 16 byte blocks): [ 56.587585] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 56.596361] Mem abort info: [ 56.599151] ESR = 0x96000006 [ 56.602196] Exception class = DABT (current EL), IL = 32 bits [ 56.608105] SET = 0, FnV = 0 [ 56.611149] EA = 0, S1PTW = 0 [ 56.614280] Data abort info: [ 56.617151] ISV = 0, ISS = 0x00000006 [ 56.620976] CM = 0, WnR = 0 [ 56.623930] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 56.630533] [0000000000000000] pgd=0000041fc7e4d003, pud=0000041fcd9bf003, pmd=0000000000000000 [ 56.639224] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 56.644782] Modules linked in: tcrypt(+) [ 56.648695] CPU: 21 PID: 2326 Comm: insmod Tainted: G W 4.19.0-rc6-00001-g3fabfb8-dirty #716 [ 56.658420] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 10/05/2018 [ 56.667537] pstate: 20000005 (nzCv daif -PAN -UAO) [ 56.672322] pc : sec_alg_skcipher_crypto+0x318/0x748 [ 56.677274] lr : sec_alg_skcipher_crypto+0x178/0x748 [ 56.682224] sp : ffff0000118e3840 [ 56.685525] x29: ffff0000118e3840 x28: ffff841fbb3f8118 [ 56.690825] x27: 0000000000000000 x26: 0000000000000000 [ 56.696125] x25: ffff841fbb3f8080 x24: ffff841fbadc0018 [ 56.701425] x23: ffff000009119000 x22: ffff841fbb24e280 [ 56.706724] x21: ffff841ff212e780 x20: ffff841ff212e700 [ 56.712023] x19: 0000000000000001 x18: ffffffffffffffff [ 56.717322] x17: 0000000000000000 x16: 0000000000000000 [ 56.722621] x15: ffff0000091196c8 x14: 72635f7265687069 [ 56.727920] x13: 636b735f676c615f x12: ffff000009119940 [ 56.733219] x11: 0000000000000000 x10: 00000000006080c0 [ 56.738519] x9 : 0000000000000000 x8 : ffff841fbb24e480 [ 56.743818] x7 : ffff841fbb24e500 x6 : ffff841ff00cdcc0 [ 56.749117] x5 : 0000000000000010 x4 : 0000000000000000 [ 56.754416] x3 : ffff841fbb24e380 x2 : ffff841fbb24e480 [ 56.759715] x1 : 0000000000000000 x0 : ffff000008f682c8 [ 56.765016] Process insmod (pid: 2326, stack limit = 0x(____ptrval____)) [ 56.771702] Call trace: [ 56.774136] sec_alg_skcipher_crypto+0x318/0x748 [ 56.778740] sec_alg_skcipher_encrypt+0x10/0x18 [ 56.783259] test_skcipher_speed+0x2a0/0x700 [tcrypt] [ 56.788298] do_test+0x18f8/0x48c8 [tcrypt] [ 56.792469] tcrypt_mod_init+0x60/0x1000 [tcrypt] [ 56.797161] do_one_initcall+0x5c/0x178 [ 56.800985] do_init_module+0x58/0x1b4 [ 56.804721] load_module+0x1da4/0x2150 [ 56.808456] __se_sys_init_module+0x14c/0x1e8 [ 56.812799] __arm64_sys_init_module+0x18/0x20 [ 56.817231] el0_svc_common+0x60/0xe8 [ 56.820880] el0_svc_handler+0x2c/0x80 [ 56.824615] el0_svc+0x8/0xc [ 56.827483] Code: a94c87a3 910b2000 f87b7842 f9004ba2 (b87b7821) [ 56.833564] ---[ end trace 0f63290590e93d94 ]--- Segmentation fault Fix this by only accessing these memories when we have different src and dst. Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 09 November 2018, 09:35:43 UTC
1457d8c Juergen Gross 07 November 2018, 17:01:00 UTC x86/xen: fix pv boot Commit 9da3f2b7405440 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") introduced a regression for booting Xen PV guests. Xen PV guests are using __put_user() and __get_user() for accessing the p2m map (physical to machine frame number map) as accesses might fail in case of not populated areas of the map. With above commit using __put_user() and __get_user() for accessing kernel pages is no longer valid. So replace the Xen hack by adding appropriate p2m access functions using the default fixup handler. Fixes: 9da3f2b7405440 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> 09 November 2018, 07:16:55 UTC
85b18b0 Stefan Wahren 08 November 2018, 19:38:26 UTC net: smsc95xx: Fix MTU range The commit f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 03:54:49 UTC
8137b6e Thor Thayer 08 November 2018, 17:42:14 UTC net: stmmac: Fix RX packet size > 8191 Ping problems with packets > 8191 as shown: PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data. 8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms wrong data byte 8144 should be 0xd0 but was 0x0 16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f %< ---------------snip-------------------------------------- 8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 8144 0 0 0 0 d0 d1 ^^^^^^^ Notice the 4 bytes of 0 before the expected byte of d0. Databook notes that the RX buffer must be a multiple of 4/8/16 bytes [1]. Update the DMA Buffer size define to 8188 instead of 8192. Remove the -1 from the RX buffer size allocations and use the new DMA Buffer size directly. [1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a [section 8.4.2 - Table 8-24] Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 03:47:44 UTC
81fe16e David S. Miller 09 November 2018, 03:38:19 UTC Merge branch 'qed-Slowpath-Queue-bug-fixes' Denis Bolotin says: ==================== qed: Slowpath Queue bug fixes This patch series fixes several bugs in the SPQ mechanism. It deals with SPQ entries management, preventing resource leaks, memory corruptions and handles error cases throughout the driver. Please consider applying to net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2018, 03:38:19 UTC
back to top