swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
- v6.1-rc6
- v6.1-rc5
- v6.1-rc4
- v6.1-rc3
- v6.1-rc2
- v6.1-rc1
- v6.0-rc7
- v6.0-rc6
- v6.0-rc5
- v6.0-rc4
- v6.0-rc3
- v6.0-rc2
- v6.0-rc1
- v6.0
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.19-rc8
- v5.19-rc7
- v5.19-rc6
- v5.19-rc5
- v5.19-rc4
- v5.19-rc3
- v5.19-rc2
- v5.19-rc1
- v5.19
- v5.18-rc7
- v5.18-rc6
- v5.18-rc5
- v5.18-rc4
- v5.18-rc3
- v5.18-rc2
- v5.18-rc1
- v5.18
- v5.17-rc8
- v5.17-rc7
- v5.17-rc6
- v5.17-rc5
- v5.17-rc4
- v5.17-rc3
- v5.17-rc2
- v5.17-rc1
- v5.17
- v5.16-rc8
- v5.16-rc7
- v5.16-rc6
- v5.16-rc5
- v5.16-rc4
- v5.16-rc3
- v5.16-rc2
- v5.16-rc1
- v5.16
- v5.15-rc7
- v5.15-rc6
- v5.15-rc5
- v5.15-rc4
- v5.15-rc3
- v5.15-rc2
- v5.15-rc1
- v5.15
- v5.14-rc7
- v5.14-rc6
- v5.14-rc5
- v5.14-rc4
- v5.14-rc3
- v5.14-rc2
- v5.14-rc1
- v5.14
- v5.13-rc7
- v5.13-rc6
- v5.13-rc5
- v5.13-rc4
- v5.13-rc3
- v5.13-rc2
- v5.13-rc1
- v5.13
- v5.12-rc8
- v5.12-rc7
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.12
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc10
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Permalinks
To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Hash IDentifiers (SWHIDs) must be used.
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
e407ee0 | Tony Lindgren | 21 January 2013, 18:17:03 UTC | ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() Otherwise we will get: WARNING: vmlinux.o(.text+0x1d4f0): Section mismatch in reference from the function omap_init_ocp2scp() to the function .init.text:omap_device_build() The function omap_init_ocp2scp() references the function __init omap_device_build(). This is often because omap_init_ocp2scp lacks a __init annotation or the annotation of omap_device_build is wrong. Signed-off-by: Tony Lindgren <tony@atomide.com> | 21 January 2013, 18:39:52 UTC |
81f3ae0 | Rob Clark | 20 January 2013, 15:37:23 UTC | ARM: OMAP2+: fix build break for omapdrm Fixes compile break with 3.8-rc4. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 21 January 2013, 18:34:08 UTC |
c1bf08a | Steven Rostedt | 14 December 2012, 14:48:15 UTC | ftrace: Be first to run code modification on modules If some other kernel subsystem has a module notifier, and adds a kprobe to a ftrace mcount point (now that kprobes work on ftrace points), when the ftrace notifier runs it will fail and disable ftrace, as well as kprobes that are attached to ftrace points. Here's the error: WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280() Hardware name: Bochs Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared] Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1 Call Trace: [<ffffffff8105e70f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff81134106>] ? __probe_kernel_read+0x46/0x70 [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffff8105e76a>] warn_slowpath_null+0x1a/0x20 [<ffffffff810fd189>] ftrace_bug+0x239/0x280 [<ffffffff810fd626>] ftrace_process_locs+0x376/0x520 [<ffffffff810fefb7>] ftrace_module_notify+0x47/0x50 [<ffffffff8163912d>] notifier_call_chain+0x4d/0x70 [<ffffffff810882f8>] __blocking_notifier_call_chain+0x58/0x80 [<ffffffff81088336>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff810c2a23>] sys_init_module+0x73/0x220 [<ffffffff8163d719>] system_call_fastpath+0x16/0x1b ---[ end trace 9ef46351e53bbf80 ]--- ftrace failed to modify [<ffffffffa0180000>] init_once+0x0/0x20 [fat] actual: cc:bb:d2:4b:e1 A kprobe was added to the init_once() function in the fat module on load. But this happened before ftrace could have touched the code. As ftrace didn't run yet, the kprobe system had no idea it was a ftrace point and simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1). Then when ftrace went to modify the location from a call to mcount/fentry into a nop, it didn't see a call op, but instead it saw the breakpoint op and not knowing what to do with it, ftrace shut itself down. The solution is to simply give the ftrace module notifier the max priority. This should have been done regardless, as the core code ftrace modification also happens very early on in boot up. This makes the module modification closer to core modification. Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by: Frank Ch. Eigler <fche@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> | 21 January 2013, 18:21:50 UTC |
734bda6 | Tony Lindgren | 21 January 2013, 17:37:13 UTC | Merge tag 'omap-fixes-b-for-v3.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8-rc4/fixes A few OMAP integration fixes for v3.8-rc, for OMAP4 audio and OMAP2 reboot. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/prcm_fixes_c_v3.8-rc/20130121073904/ | 21 January 2013, 17:37:13 UTC |
42c364a | Takashi Iwai | 21 January 2013, 15:53:37 UTC | ALSA: hda - Add Conexant CX20755/20756/20757 codec IDs These are just compatible with other CX2075x codecs. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 21 January 2013, 15:53:37 UTC |
85de7fa | Marek Vasut | 21 November 2012, 05:19:06 UTC | i2c: mxs: Fix misuse init_completion The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> | 21 January 2013, 15:26:29 UTC |
103a197 | Jerry Snitselaar | 17 January 2013, 08:04:14 UTC | security/device_cgroup: lock assert fails in dev_exception_clean() devcgroup_css_free() calls dev_exception_clean() without the devcgroup_mutex being locked. Shutting down a kvm virt was giving me the following trace: [36280.732764] ------------[ cut here ]------------ [36280.732778] WARNING: at /home/snits/dev/linux/security/device_cgroup.c:172 dev_exception_clean+0xa9/0xc0() [36280.732782] Hardware name: Studio XPS 8100 [36280.732785] Modules linked in: xt_REDIRECT fuse ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_CHECKSUM iptable_mangle bridge stp llc nf_conntrack_ipv4 ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_defrag_ipv4 ip6table_filter it87 hwmon_vid xt_state nf_conntrack ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq coretemp snd_seq_device crc32c_intel snd_pcm snd_page_alloc snd_timer snd broadcom tg3 serio_raw i7core_edac edac_core ptp pps_core lpc_ich pcspkr mfd_core soundcore microcode i2c_i801 nfsd auth_rpcgss nfs_acl lockd vhost_net sunrpc tun macvtap macvlan kvm_intel kvm uinput binfmt_misc autofs4 usb_storage firewire_ohci firewire_core crc_itu_t radeon drm_kms_helper ttm [36280.732921] Pid: 933, comm: libvirtd Tainted: G W 3.8.0-rc3-00307-g4c217de #1 [36280.732922] Call Trace: [36280.732927] [<ffffffff81044303>] warn_slowpath_common+0x93/0xc0 [36280.732930] [<ffffffff8104434a>] warn_slowpath_null+0x1a/0x20 [36280.732932] [<ffffffff812deaf9>] dev_exception_clean+0xa9/0xc0 [36280.732934] [<ffffffff812deb2a>] devcgroup_css_free+0x1a/0x30 [36280.732938] [<ffffffff810ccd76>] cgroup_diput+0x76/0x210 [36280.732941] [<ffffffff8119eac0>] d_delete+0x120/0x180 [36280.732943] [<ffffffff81195cff>] vfs_rmdir+0xef/0x130 [36280.732945] [<ffffffff81195e47>] do_rmdir+0x107/0x1c0 [36280.732949] [<ffffffff8132d17e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [36280.732951] [<ffffffff81198646>] sys_rmdir+0x16/0x20 [36280.732954] [<ffffffff8173bd82>] system_call_fastpath+0x16/0x1b [36280.732956] ---[ end trace ca39dced899a7d9f ]--- Signed-off-by: Jerry Snitselaar <jerry.snitselaar@oracle.com> Cc: stable@kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com> | 21 January 2013, 13:27:55 UTC |
a67adb9 | Dmitry Kasatkin | 18 January 2013, 21:56:39 UTC | evm: checking if removexattr is not a NULL The following lines of code produce a kernel oops. fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0); fchmod(fd, 0666); [ 139.922364] BUG: unable to handle kernel NULL pointer dereference at (null) [ 139.924982] IP: [< (null)>] (null) [ 139.924982] *pde = 00000000 [ 139.924982] Oops: 0000 [#5] SMP [ 139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button [ 139.924982] Pid: 3070, comm: acpid Tainted: G D 3.8.0-rc2-kds+ #465 Bochs Bochs [ 139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 [ 139.924982] EIP is at 0x0 [ 139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2 [ 139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4 [ 139.924982] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0 [ 139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 139.924982] DR6: ffff0ff0 DR7: 00000400 [ 139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000) [ 139.924982] Stack: [ 139.924982] c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940 [ 139.924982] e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3 [ 139.924982] 00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08 [ 139.924982] Call Trace: [ 139.924982] [<c1203c88>] ? evm_update_evmxattr+0x5b/0x62 [ 139.924982] [<c1203964>] evm_inode_post_setattr+0x22/0x26 [ 139.924982] [<c10e20c3>] notify_change+0x25f/0x281 [ 139.924982] [<c10cbf56>] chmod_common+0x59/0x76 [ 139.924982] [<c10e27a1>] ? put_unused_fd+0x33/0x33 [ 139.924982] [<c10cca09>] sys_fchmod+0x39/0x5c [ 139.924982] [<c13f4f30>] syscall_call+0x7/0xb [ 139.924982] Code: Bad EIP value. This happens because sockets do not define the removexattr operation. Before removing the xattr, verify the removexattr function pointer is not NULL. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com> | 21 January 2013, 13:27:50 UTC |
e3e2775 | Nickolai Zeldovich | 17 January 2013, 02:36:17 UTC | cifs: fix srcip_matches() for ipv6 srcip_matches() previously had code like this: srcip_matches(..., struct sockaddr *rhs) { /* ... */ struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *) &rhs; return ipv6_addr_equal(..., &vaddr6->sin6_addr); } which interpreted the values on the stack after the 'rhs' pointer as an ipv6 address. The correct thing to do is to use 'rhs', not '&rhs'. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 21 January 2013, 07:37:26 UTC |
9a92841 | Linus Torvalds | 21 January 2013, 04:55:49 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of intel and radeon fixes, along with two fixes to TTM code. The correct fix for the Intel ironlake failure is in this, and should make things more stable, along with some misc radeon fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: ttm: on move memory failure don't leave a node dangling ttm: don't destroy old mm_node on memcpy failure Revert "drm/radeon: do not move bo to different placement at each cs" drm/i915: fix FORCEWAKE posting reads drm/i915: Invalidate the relocation presumed_offsets along the slow path drm/i915/eDP: do not write power sequence registers for ghost eDP drm/radeon: improve semaphore debugging on lockup drm/radeon: allow FP16 color clear registers on r500 drm/radeon: clear reset flags if engines are idle drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state | 21 January 2013, 04:55:49 UTC |
ee61abb | Linus Torvalds | 21 January 2013, 04:22:58 UTC | module: fix missing module_mutex unlock Commit 1fb9341ac348 ("module: put modules in list much earlier") moved some of the module initialization code around, and in the process changed the exit paths too. But for the duplicate export symbol error case the change made the ddebug_cleanup path jump to after the module mutex unlock, even though it happens with the mutex held. Rusty has some patches to split this function up into some helper functions, hopefully the mess of complex goto targets will go away eventually. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 January 2013, 04:22:58 UTC |
014b344 | Dave Airlie | 16 January 2013, 05:58:34 UTC | ttm: on move memory failure don't leave a node dangling if we have a move notify callback, when moving fails, we call move notify the opposite way around, however this ends up with *mem containing the mm_node from the bo, which means we double free it. This is a follow on to the previous fix. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 21 January 2013, 03:45:23 UTC |
6305418 | Dave Airlie | 16 January 2013, 04:25:44 UTC | ttm: don't destroy old mm_node on memcpy failure When we are using memcpy to move objects around, and we fail to memcpy due to lack of memory to populate or failure to finish the copy, we don't want to destroy the mm_node that has been copied into old_copy. While working on a new kms driver that uses memcpy, if I overallocated bo's up to the memory limits, and eviction failed, then machine would oops soon after due to having an active bo with an already freed drm_mm embedded in it, freeing it a second time didn't end well. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 21 January 2013, 03:45:02 UTC |
ffb5fd5 | Dave Airlie | 21 January 2013, 03:25:30 UTC | Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next More important fixes for 3.9: - error_state improvements to help debug the new scanline wait code added for gen6+ - bug reports started popping up :( patch from Chris Wilson. - fix a panel power sequence confusion between the eDP and lvds detection code resulting in black screens - regression introduce in 3.8 (Jani Nikula) - Chris fixed the root-cause of the ilk relocation vs. evict bug. - Another piece of cargo-culted rc6 lore from Jani, fixes up a regression where a system refused to go into rc6 after suspend sometimes. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix FORCEWAKE posting reads drm/i915: Invalidate the relocation presumed_offsets along the slow path drm/i915/eDP: do not write power sequence registers for ghost eDP drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state | 21 January 2013, 03:25:30 UTC |
a3f5aed | Dave Airlie | 21 January 2013, 03:24:12 UTC | Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next A number of fixes, and one revert for a patch having some wierd side effects. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/radeon: do not move bo to different placement at each cs" drm/radeon: improve semaphore debugging on lockup drm/radeon: allow FP16 color clear registers on r500 drm/radeon: clear reset flags if engines are idle | 21 January 2013, 03:24:12 UTC |
2263647 | Linus Torvalds | 21 January 2013, 00:44:28 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module fixes and a virtio block fix from Rusty Russell: "Various minor fixes, but a slightly more complex one to fix the per-cpu overload problem introduced recently by kvm id changes." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: put modules in list much earlier. module: add new state MODULE_STATE_UNFORMED. module: prevent warning when finit_module a 0 sized file virtio-blk: Don't free ida when disk is in use | 21 January 2013, 00:44:28 UTC |
3a142ed | Linus Torvalds | 20 January 2013, 21:58:48 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull misc syscall fixes from Al Viro: - compat syscall fixes (discussed back in December) - a couple of "make life easier for sigaltstack stuff by reducing inter-tree dependencies" - fix up compiler/asmlinkage calling convention disagreement of sys_clone() - misc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: sys_clone() needs asmlinkage_protect make sure that /linuxrc has std{in,out,err} x32: fix sigtimedwait x32: fix waitid() switch compat_sys_wait4() and compat_sys_waitid() to COMPAT_SYSCALL_DEFINE switch compat_sys_sigaltstack() to COMPAT_SYSCALL_DEFINE CONFIG_GENERIC_SIGALTSTACK build breakage with asm-generic/syscalls.h Ensure that kernel_init_freeable() is not inlined into non __init code | 20 January 2013, 21:58:48 UTC |
edea0d0 | Oleg Nesterov | 20 January 2013, 19:25:47 UTC | ia64: kill thread_matches(), unexport ptrace_check_attach() The ia64 function "thread_matches()" has no users since commit e868a55c2a8c ("[IA64] remove find_thread_for_addr()"). Remove it. This allows us to make ptrace_check_attach() static to kernel/ptrace.c, which is good since we'll need to change the semantics of it and fix up all the callers. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 January 2013, 20:26:05 UTC |
25122d1 | Ilya Dryomov | 20 January 2013, 13:57:57 UTC | Btrfs: reorder locks and sanity checks in btrfs_ioctl_defrag Operation-specific check (whether subvol is readonly or not) should go after the mutual exclusiveness check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 20 January 2013, 14:21:22 UTC |
4ac20c7 | Ilya Dryomov | 20 January 2013, 13:57:57 UTC | Btrfs: fix unlock order in btrfs_ioctl_rm_dev Fix unlock order in btrfs_ioctl_rm_dev(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 20 January 2013, 14:21:21 UTC |
18f39c4 | Ilya Dryomov | 20 January 2013, 13:57:57 UTC | Btrfs: fix unlock order in btrfs_ioctl_resize Fix unlock order in btrfs_ioctl_resize(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 20 January 2013, 14:21:20 UTC |
2c0c9da | Ilya Dryomov | 20 January 2013, 13:57:57 UTC | Btrfs: fix "mutually exclusive op is running" error code The error code that is returned in response to starting a mutually exclusive operation when there is one already running got silently changed from EINVAL to EINPROGRESS by 5ac00add. Returning EINPROGRESS to, say, add_dev, when rm_dev is running is misleading. Furthermore, the operation itself may want to use EINPROGRESS for other purposes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 20 January 2013, 14:21:18 UTC |
ed0fb78 | Ilya Dryomov | 20 January 2013, 13:57:57 UTC | Btrfs: bring back balance pause/resume logic Balance pause/resume logic got broken by 5ac00add (went in into 3.8-rc1 as part of dev-replace merge). Offending commit took a stab at making mutually exclusive volume operations (add_dev, rm_dev, resize, balance, replace_dev) not block behind volume_mutex if another such operation is in progress and instead return an error right away. Balancing front-end relied on the blocking behaviour, so the fix is ugly, but short of a complete rework, it's the best we can do. Reported-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 20 January 2013, 14:21:17 UTC |
b1e0318 | Al Viro | 20 January 2013, 03:13:34 UTC | sys_clone() needs asmlinkage_protect Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 20 January 2013, 03:13:34 UTC |
43b1682 | Al Viro | 19 January 2013, 18:29:54 UTC | make sure that /linuxrc has std{in,out,err} Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 19 January 2013, 18:29:54 UTC |
210b184 | Russell King | 19 January 2013, 15:27:30 UTC | Merge branch 'for-rmk/virt/hyp-boot/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes | 19 January 2013, 15:27:30 UTC |
93d5bf0 | Santosh Shilimkar | 17 January 2013, 06:18:04 UTC | ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SO Commit 8fb54284ba6a {ARM: mm: Add strongly ordered descriptor support} added XN flag at section level but missed it at PTE level. Fix it by adding the L_PTE_XN to MT_MEMORY_SO PTE descriptor. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 19 January 2013, 11:41:25 UTC |
ec50b4c | Takashi Iwai | 19 January 2013, 11:17:54 UTC | ALSA: hda - Add fixup for Acer AO725 laptop Acer AO725 needs the same fixup as AO756. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 January 2013, 11:17:54 UTC |
1565337 | Russell King | 19 January 2013, 11:05:57 UTC | ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem Subhash Jadavani reported this partial backtrace: Now consider this call stack from MMC block driver (this is on the ARMv7 based board): [<c001b50c>] (v7_dma_inv_range+0x30/0x48) from [<c0017b8c>] (dma_cache_maint_page+0x1c4/0x24c) [<c0017b8c>] (dma_cache_maint_page+0x1c4/0x24c) from [<c0017c28>] (___dma_page_cpu_to_dev+0x14/0x1c) [<c0017c28>] (___dma_page_cpu_to_dev+0x14/0x1c) from [<c0017ff8>] (dma_map_sg+0x3c/0x114) This is caused by incrementing the struct page pointer, and running off the end of the sparsemem page array. Fix this by incrementing by pfn instead, and convert the pfn to a struct page. Cc: <stable@vger.kernel.org> Suggested-by: James Bottomley <JBottomley@Parallels.com> Tested-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 19 January 2013, 11:05:57 UTC |
2521686 | Lans Zhang | 16 January 2013, 09:03:29 UTC | ACPI, APEI: Fixup incorrect 64-bit access width firmware bug The bit width check was introduced by 15afae60 (ACPI, APEI: Fix incorrect APEI register bit width check and usage), and a fixup for incorrect 32-bit width memory address was given by f712c71 (ACPI, APEI: Fixup common access width firmware bug). Now there is a similar symptom: [Firmware Bug]: APEI: Invalid bit width + offset in GAR [0x12345000/64/0/3/0] Another bogus BIOS reports an incorrect 64-bit width in trigger table. Thus, apply to a similar workaround for 64-bit width memory address. Signed-off-by: Lans Zhang <jia.zhang@windriver.com> Acked-by: Gary Hade <garyhade@us.ibm.com> Acked-by: Myron Stowe <myron.stowe@redhat.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 19 January 2013, 00:34:43 UTC |
bdcc612 | Jon Hunter | 18 January 2013, 23:48:16 UTC | ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls During the migration to the common clock framework, calls to the functions omap2xxx_clkt_vps_late_init() were not preserved for OMAP2420 and OMAP2430. This causes the variables "sys_ck_rate" and "curr_prcm_set" to be uninitialised on boot. On reboot, this causes the following error message to be displayed because the appropriate MPU clock frequency (derived from sys_ck_rate) cannot be found. "Could not set MPU rate to 4294MHz" Fix this by adding back calls to omap2xxx_clkt_vps_late_init() in the OMAP2420 and OMAP2430 clock initialisation code. Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: dropped the duplicated call to omap2xxx_clkt_vps_check_bootloader_rates() after consultation with Jon; updated patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com> | 18 January 2013, 23:48:16 UTC |
12d82e4 | Peter Ujfalusi | 18 January 2013, 23:48:16 UTC | ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [paul@pwsan.com: copy patch description into hwmod data comments] Signed-off-by: Paul Walmsley <paul@pwsan.com> | 18 January 2013, 23:48:16 UTC |
981827a | Peter Ujfalusi | 18 January 2013, 23:48:15 UTC | ARM: OMAP4: clock data: Lock ABE DPLL on all revisions To avoid issues with audio caused by non locked ABE DPLL we should make sure it is locked in all OMAP4 revisions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: cleaned up patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com> | 18 January 2013, 23:48:15 UTC |
f427e5f | Thomas Schlichter | 18 January 2013, 23:28:22 UTC | ACPI / processor: Get power info before updating the C-states acpi_processor_get_power_info() has to be called before acpi_processor_setup_cpuidle_states() to have the latest information available. This fixes the missing C-state information after AC-->DC transition. Signed-off-by: Thomas Schlichter <thomas.schlichter@web.de> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 18 January 2013, 23:28:22 UTC |
5da1f88 | Linus Torvalds | 18 January 2013, 22:06:29 UTC | Merge tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are 3 USB patches for 3.8-rc4. Two of them are new device id patches, and the third fixes a reported oops in the io_ti USB serial driver" * tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: io_ti: Fix NULL dereference in chase_port() USB: option: add TP-LINK HSUPA Modem MA180 USB: option: blacklist network interface on ONDA MT8205 4G LTE | 18 January 2013, 22:06:29 UTC |
793388a | Linus Torvalds | 18 January 2013, 22:05:59 UTC | Merge tag 'tty-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg Kroah-Hartman: "Here are a few tty/serial driver fixes for 3.8-rc4 that resolve a number of problems that people have been having, including the ptys ioctl issue that is a regression fix" * tag 'tty-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: 8250/16?50: Add support for Broadcom TruManage redirected serial port pty: return EINVAL for TIOCGPTN for BSD ptys serial:ifx6x60:Keep word size accordance with SPI controller tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler serial: samsung: remove redundant setting of line config during port reset serial:ifx6x60:Delete SPI timer when shut down port tty/8250: The correct device id for this card is 0x0022 tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition tty: serial: vt8500: fix return value check in vt8500_serial_probe() serial: mxs-auart: Index is unsigned mxs: uart: fix setting RTS from software | 18 January 2013, 22:05:59 UTC |
abad21a | Linus Torvalds | 18 January 2013, 22:05:25 UTC | Merge tag 'staging-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver bugfixes from Greg Kroah-Hartman: "Here are some bugfixes for the drivers/staging tree for 3.8-rc4. Nothing major, just a number of small fixes for problems that people have reported, including finally tracking down the root of the 64/32 bit problem with the vt6656 that has been driving people crazy for a while" * tag 'staging-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging/sb105x: PARPORT config is not good enough must use PARPORT_PC staging: wlan-ng: Fix clamping of returned SSID length staging: vt6656: Fix inconsistent structure packing staging:iio:adis16080: Perform sign extension iio: mxs-lradc: indexes are unsigned | 18 January 2013, 22:05:25 UTC |
0d060d2 | Linus Torvalds | 18 January 2013, 22:04:50 UTC | Merge tag 'char-misc-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg Kroah-Hartman: "Here are two hyperv patches for 3.8-rc4 that fix some reported problems hv_balloon driver" * tag 'char-misc-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: balloon: Fix a memory leak Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msg | 18 January 2013, 22:04:50 UTC |
5c69bed | Linus Torvalds | 18 January 2013, 20:02:52 UTC | Merge tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - CVE-2013-0190/XSA-40 (or stack corruption for 32-bit PV kernels) - Fix racy vma access spotted by Al Viro - Fix mmap batch ioctl potentially resulting in large O(n) page allcations. - Fix vcpu online/offline BUG:scheduling while atomic.. - Fix unbound buffer scanning for more than 32 vCPUs. - Fix grant table being incorrectly initialized - Fix incorrect check in pciback - Allow privcmd in backend domains. Fix up whitespace conflict due to ugly merge resolution in Xen tree in arch/arm/xen/enlighten.c * tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests. Revert "xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic." xen/gntdev: remove erronous use of copy_to_user xen/gntdev: correctly unmap unlinked maps in mmu notifier xen/gntdev: fix unsafe vma access xen/privcmd: Fix mmap batch ioctl. Xen: properly bound buffer access when parsing cpu/*/availability xen/grant-table: correctly initialize grant table version 1 x86/xen : Fix the wrong check in pciback xen/privcmd: Relax access control in privcmd_ioctl_mmap | 18 January 2013, 20:02:52 UTC |
b814469 | Linus Torvalds | 18 January 2013, 19:58:10 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu arch fixes from Greg Ungerer: "This contains a couple of fixes, both affecting compilation of non-mmu m68k targets." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix conditional use of init_pointer_table m68knommu: add KMAP definitions for non-MMU definitions | 18 January 2013, 19:58:10 UTC |
2f91ec8 | Kirill A. Shutemov | 26 December 2012, 00:19:55 UTC | asm-generic, mm: pgtable: convert my_zero_pfn() to macros to fix build Commit 816422ad7647 ("asm-generic, mm: pgtable: consolidate zero page helpers") broke the compile on MIPS if SPARSEMEM is enabled. We get this: In file included from arch/mips/include/asm/pgtable.h:552, from include/linux/mm.h:44, from arch/mips/kernel/asm-offsets.c:14: include/asm-generic/pgtable.h: In function 'my_zero_pfn': include/asm-generic/pgtable.h:466: error: implicit declaration of function 'page_to_section' In file included from arch/mips/kernel/asm-offsets.c:14: include/linux/mm.h: At top level: include/linux/mm.h:738: error: conflicting types for 'page_to_section' include/asm-generic/pgtable.h:466: note: previous implicit declaration of 'page_to_section' was here Due header files inter-dependencies, the only way I see to fix it is convert my_zero_pfn() for __HAVE_COLOR_ZERO_PAGE to macros. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 January 2013, 19:23:26 UTC |
631e8ac | Borislav Petkov | 17 January 2013, 23:19:37 UTC | powernow-k8: Add a kconfig dependency on acpi-cpufreq Andreas reports in https://bugzilla.kernel.org/show_bug.cgi?id=51741 that with his Gentoo config, acpi-cpufreq wasn't enabled and powernow-k8 couldn't handoff properly to acpi-cpufreq leading to running without P-state support (i.e., cores are constantly in P0). To alleaviate that, we need to make powernow-k8 depend on acpi-cpufreq so that acpi-cpufreq is always present. References: https://bugzilla.kernel.org/show_bug.cgi?id=51741 Reported-by: Andreas <linuxuser330250@gmx.net> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 18 January 2013, 12:43:44 UTC |
b88a634 | Konrad Rzeszutek Wilk | 16 January 2013, 22:40:07 UTC | ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled If cpuidle is disabled, that means that: per_cpu(acpi_cpuidle_device, pr->id) is set to NULL as the acpi_processor_power_init ends up failing at retval = cpuidle_register_driver(&acpi_idle_driver) (in acpi_processor_power_init) and never sets the per_cpu idle device. So when acpi_processor_hotplug on CPU online notification tries to reference said device it crashes: cpu 3 spinlock event irq 62 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffff81381013>] acpi_processor_setup_cpuidle_cx+0x3f/0x105 PGD a259b067 PUD ab38b067 PMD 0 Oops: 0002 [#1] SMP odules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c nouveau mxm_wmi wmi radeon ttm sg sr_mod sd_mod cdrom ata_generic ata_piix libata crc32c_intel scsi_mod atl1c i915 fbcon tileblit font bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 1 Pid: 3047, comm: bash Not tainted 3.8.0-rc3upstream-00250-g165c029 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[<ffffffff81381013>] [<ffffffff81381013>] acpi_processor_setup_cpuidle_cx+0x3f/0x105 RSP: e02b:ffff88001742dca8 EFLAGS: 00010202 RAX: 0000000000010be9 RBX: ffff8800a0a61800 RCX: ffff880105380000 RDX: 0000000000000003 RSI: 0000000000000200 RDI: ffff8800a0a61800 RBP: ffff88001742dce8 R08: ffffffff81812360 R09: 0000000000000200 R10: aaaaaaaaaaaaaaaa R11: 0000000000000001 R12: ffff8800a0a61800 R13: 00000000ffffff01 R14: 0000000000000000 R15: ffffffff81a907a0 FS: 00007fd6942f7700(0000) GS:ffff880105280000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000000a6773000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 3047, threadinfo ffff88001742c000, task ffff880017944000) Stack: 0000000000000150 ffff880100f59e00 ffff88001742dcd8 ffff8800a0a61800 0000000000000000 00000000ffffff01 0000000000000000 ffffffff81a907a0 ffff88001742dd18 ffffffff813815b1 ffff88001742dd08 ffffffff810ae336 Call Trace: [<ffffffff813815b1>] acpi_processor_hotplug+0x7c/0x9f [<ffffffff810ae336>] ? schedule_delayed_work_on+0x16/0x20 [<ffffffff8137ee8f>] acpi_cpu_soft_notify+0x90/0xca [<ffffffff8166023d>] notifier_call_chain+0x4d/0x70 [<ffffffff810bc369>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81094a4b>] __cpu_notify+0x1b/0x30 [<ffffffff81652cf7>] _cpu_up+0x103/0x14b [<ffffffff81652e18>] cpu_up+0xd9/0xec [<ffffffff8164a254>] store_online+0x94/0xd0 [<ffffffff814122fb>] dev_attr_store+0x1b/0x20 [<ffffffff81216404>] sysfs_write_file+0xf4/0x170 This patch fixes it. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 18 January 2013, 12:43:43 UTC |
6f8c2e7 | Konrad Rzeszutek Wilk | 16 January 2013, 22:40:01 UTC | intel_idle: Don't register CPU notifier if we are not running. The 'intel_idle_probe' probes the CPU and sets the CPU notifier. But if later on during the module initialization we fail (say in cpuidle_register_driver), we stop loading, but we neglect to unregister the CPU notifier. This means that during CPU hotplug events the system will fail: calling intel_idle_init+0x0/0x326 @ 1 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff intel_idle: intel_idle yielding to none initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs ... some time later, offlining and onlining a CPU: cpu 3 spinlock event irq 62 BUG: unable to ] __cpuidle_register_device+0x1c/0x120 PGD 99b8b067 PUD 99b95067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 0 Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[<ffffffff814d956c>] [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP: e02b:ffff88009dacfcb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000 RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008 R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000 R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0 FS: 00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0) Stack: ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd Call Trace: [<ffffffff8107f2d0>] ? collect_cpu_info_local+0x30/0x30 [<ffffffff810c2fb7>] ? __might_sleep+0xe7/0x100 [<ffffffff814d9882>] cpuidle_register_device+0x32/0x70 [<ffffffff81340afd>] intel_idle_cpu_init+0xad/0x110 [<ffffffff81340bc8>] cpu_hotplug_notify+0x68/0x80 [<ffffffff8166023d>] notifier_call_chain+0x4d/0x70 [<ffffffff810bc369>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81094a4b>] __cpu_notify+0x1b/0x30 [<ffffffff81652cf7>] _cpu_up+0x103/0x14b [<ffffffff81652e18>] cpu_up+0xd9/0xec [<ffffffff8164a254>] store_online+0x94/0xd0 [<ffffffff814122fb>] dev_attr_store+0x1b/0x20 [<ffffffff81216404>] sysfs_write_file+0xf4/0x170 [<ffffffff811a1024>] vfs_write+0xb4/0x130 [<ffffffff811a17ea>] sys_write+0x5a/0xa0 [<ffffffff816643a9>] system_call_fastpath+0x16/0x1b Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2 RIP [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP <ffff88009dacfcb8> This patch fixes that by moving the CPU notifier registration as the last item to be done by the module. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: 3.6+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 18 January 2013, 12:43:43 UTC |
b810075 | Benoit Goby | 09 January 2013, 03:57:09 UTC | usb: gadget: FunctionFS: Fix missing braces in parse_opts Add missing braces around an if block in ffs_fs_parse_opts. This broke parsing the uid/gid mount options and causes mount to fail when using uid/gid. This has been introduced by commit b9b73f7c (userns: Convert usb functionfs to use kuid/kgid where appropriate) in 3.7. Cc: <stable@vger.kernel.org> Signed-off-by: Benoit Goby <benoit@android.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com> | 18 January 2013, 12:11:11 UTC |
6048e4c | Pratyush Anand | 18 January 2013, 11:23:56 UTC | usb: dwc3: gadget: fix ep->maxburst for ep0 dwc3_gadget_set_ep_config expects maxburst as incremented by 1. So, by default initialize ep->maxburst to 1 for ep0. Cc: <stable@vger.kernel.org> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com> | 18 January 2013, 12:11:00 UTC |
61c4b56 | Peter Chen | 17 January 2013, 10:03:17 UTC | ARM: i.MX clock: Change the connection-id for fsl-usb2-udc As we use platform_device_id for fsl-usb2-udc driver, it needs to change clk connection-id, or the related devm_clk_get will be failed. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> | 18 January 2013, 12:08:22 UTC |
c2c9caa | Peter Chen | 17 January 2013, 10:03:16 UTC | usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap As mach/hardware.h is deleted, we can't visit platform code at driver. It has no phy driver to combine with this controller, so it has to use ioremap to map phy address as a workaround. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> | 18 January 2013, 12:08:21 UTC |
f0ea883 | Peter Chen | 17 January 2013, 10:03:15 UTC | usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id As mach/hardware.h is deleted, we need to use platform_device_id to differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has already used pdata to differentiate runtime Meanwhile we update the platform code accordingly. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> | 18 January 2013, 12:08:20 UTC |
091a62c | Sergei Shtylyov | 14 December 2012, 18:30:27 UTC | usb: musb: cppi_dma: drop '__init' annotation This patch fixes the following: WARNING: vmlinux.o(.text+0x1e709c): Section mismatch in reference from the funct ion dma_controller_create() to the function .init.text:cppi_controller_start() The function dma_controller_create() references the function __init cppi_controller_start(). This is often because dma_controller_create lacks a __init annotation or the annotation of cppi_controller_start is wrong. This warning is there due to the deficiency in the commit 07a67bbb (usb: musb: Make dma_controller_create __devinit). Since the start() method is only called from musb_init_controller() which is not annotated, drop '__init' annotation from cppi_controller_start() and also cppi_pool_init() since it gets called from that function, to avoid another section mismatch warning... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: Felipe Balbi <balbi@ti.com> | 18 January 2013, 12:08:18 UTC |
e043403 | David Henningsson | 18 January 2013, 11:00:47 UTC | ALSA: hda - Fix mute led for another HP machine This machine also has the "HP_Mute_LED_0_A" string in DMI information. Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1096789 Tested-by: Tammy Yang <tammy.yang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 January 2013, 11:29:10 UTC |
7d1f9ae | Linus Torvalds | 18 January 2013, 03:25:45 UTC | Linux 3.8-rc4 | 18 January 2013, 03:25:45 UTC |
1ee0a22 | Wolfgang Frisch | 17 January 2013, 00:07:02 UTC | USB: io_ti: Fix NULL dereference in chase_port() The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[<ffffffff8144e62a>] [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6 [ 56.283512] [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199 [ 56.283512] [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [<ffffffff81300171>] ? edge_close+0x64/0x129 [ 56.283512] [<ffffffff810612f7>] ? __wake_up+0x35/0x46 [ 56.283512] [<ffffffff8106135b>] ? should_resched+0x5/0x23 [ 56.283512] [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351 [ 56.283512] [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25 [ 56.283512] [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [<ffffffff8128b7a3>] ? device_del+0x119/0x167 [ 56.283512] [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180 [ 56.283512] [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6 [ 56.283512] [<ffffffff812e4435>] ? hub_thread+0x577/0xe82 [ 56.283512] [<ffffffff8144daa7>] ? __schedule+0x490/0x4be [ 56.283512] [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff810570b4>] ? kthread+0x81/0x89 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 <f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP <ffff88001fa99ab0> [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch <wfpub@roembden.net> Cc: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 January 2013, 01:34:39 UTC |
99beb2e | Bjørn Mork | 15 January 2013, 09:29:49 UTC | USB: option: add TP-LINK HSUPA Modem MA180 The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 January 2013, 01:34:39 UTC |
2291dff | Bjørn Mork | 17 January 2013, 14:14:22 UTC | USB: option: blacklist network interface on ONDA MT8205 4G LTE The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 January 2013, 01:34:38 UTC |
7dfc833 | Steven Rostedt | 12 January 2013, 01:17:01 UTC | staging/sb105x: PARPORT config is not good enough must use PARPORT_PC The sb105x driver calls parport_pc_probe_port() which isn't defined if PARPORT_PC isn't enabled. Protecting it with CONFIG_PARPORT is not good enough, must protect it with CONFIG_PARPORT_PC. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 January 2013, 00:39:41 UTC |
811a37e | Tormod Volden | 09 January 2013, 21:23:32 UTC | staging: wlan-ng: Fix clamping of returned SSID length Commit 2e254212 broke listing of available network names, since it clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of WLAN_SSID_MAXLEN (32). https://bugzilla.kernel.org/show_bug.cgi?id=52501 Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 January 2013, 00:38:07 UTC |
aec992f | Greg Kroah-Hartman | 18 January 2013, 00:34:33 UTC | Merge tag 'iio-fixes-for-3.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second round of fixes for IIO post 3.8-rc1 Two tiny fixes * A build warning fix due to signed / unsigned comparison * Missing sign extension in adis16080 | 18 January 2013, 00:34:33 UTC |
d328614 | Alexander Graf | 17 January 2013, 12:50:25 UTC | KVM: PPC: Emulate dcbf Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Ben Collins <ben.c@servergy.com> CC: stable@vger.kernel.org | 17 January 2013, 23:40:49 UTC |
444ee9b | Kees Cook | 17 January 2013, 02:53:48 UTC | PCI: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> | 17 January 2013, 23:22:05 UTC |
ebebd49 | Stephen Hurd | 17 January 2013, 22:14:53 UTC | 8250/16?50: Add support for Broadcom TruManage redirected serial port Add support for the UART device present in Broadcom TruManage capable NetXtreme chips (ie: 5761m 5762, and 5725). This implementation has a hidden transmit FIFO, so running in single-byte interrupt mode results in too many interrupts. The UART_CAP_HFIFO capability was added to track this. It continues to reload the THR as long as the THRE and TSRE bits are set in the LSR up to a specified limit (1024 is used here). Signed-off-by: Stephen Hurd <shurd@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 17 January 2013, 22:02:55 UTC |
ded2f29 | Jiri Slaby | 11 January 2013, 11:06:27 UTC | pty: return EINVAL for TIOCGPTN for BSD ptys Commit bbb63c514a3464342967237a51a21ea8f61ab951 (drivers:tty:fix up ENOIOCTLCMD error handling) changed the default return value from tty ioctl to be ENOTTY and not EINVAL. This is appropriate. But in case of TIOCGPTN for the old BSD ptys glibc started failing because it expects EINVAL to be returned. Only then it continues to obtain the pts name the other way around. So fix this case by explicit return of EINVAL in this case. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Florian Westphal <fw@strlen.de> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> # 3.7+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 17 January 2013, 21:56:57 UTC |
1ee4c55 | Ben Hutchings | 14 January 2013, 01:29:17 UTC | staging: vt6656: Fix inconsistent structure packing vt6656 has several headers that use the #pragma pack(1) directive to enable structure packing, but never disable it. The layout of structures defined in other headers can then depend on which order the various headers are included in, breaking the One Definition Rule. In practice this resulted in crashes on x86_64 until the order of header inclusion was changed for some files in commit 11d404cb56ecd ('staging: vt6656: fix headers and add cfg80211.'). But we need a proper fix that won't be affected by future changes to the order of inclusion. This removes the #pragma pack(1) directives and adds __packed to the structure definitions for which packing appears to have been intended. Reported-and-tested-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 17 January 2013, 21:08:32 UTC |
33080c1 | K. Y. Srinivasan | 11 December 2012, 19:07:17 UTC | Drivers: hv: balloon: Fix a memory leak The send buffer was being leaked; fix it. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reported-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 17 January 2013, 19:58:00 UTC |
6427a0d | K. Y. Srinivasan | 06 December 2012, 19:06:54 UTC | Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msg There is bug in the definition of struct dm_info_msg. This patch fixes the definition of this structure and makes the corresponding adjustments. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 17 January 2013, 19:58:00 UTC |
2070787 | Alex Deucher | 17 January 2013, 18:10:50 UTC | Revert "drm/radeon: do not move bo to different placement at each cs" This reverts commit d025e9e2b890db679f1246037bf65bd4be512627. This causes corruption for a number of users and needs further investigation in the next cycle. https://bugzilla.kernel.org/show_bug.cgi?id=52491 https://bugs.freedesktop.org/show_bug.cgi?id=58659 http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.html Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 17 January 2013, 18:10:50 UTC |
72ffaa4 | Linus Torvalds | 17 January 2013, 16:56:30 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 patches from Martin Schwidefsky: "A couple of bug fixes: one of the transparent huge page primitives is broken, the sched_clock function overflows after 417 days, the XFS module has grown too large for -fpic and the new pci code has broken normal channel subsystem notifications." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/chsc: fix SEI usage s390/time: fix sched_clock() overflow s390: use -fPIC for module compile s390/mm: fix pmd_pfn() for thp | 17 January 2013, 16:56:30 UTC |
8f70611 | Wei Yongjun | 18 October 2012, 14:51:25 UTC | fuse: remove unused variable in fuse_try_move_page() The variables mapping,index are initialized but never used otherwise, so remove the unused variables. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> | 17 January 2013, 12:09:59 UTC |
cdadb11 | Miklos Szeredi | 10 November 2012, 15:55:56 UTC | fuse: make fuse_file_fallocate() static Fix the following sparse warning: fs/fuse/file.c:2249:6: warning: symbol 'fuse_file_fallocate' was not declared. Should it be static? Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> | 17 January 2013, 12:09:47 UTC |
807185e | Robert P. J. Day | 29 August 2012, 21:51:51 UTC | fuse: Move CUSE Kconfig entry from fs/Kconfig into fs/fuse/Kconfig Given that CUSE depends on FUSE, it only makes sense to move its Kconfig entry into the FUSE Kconfig file. Also, add a few grammatical and semantic touchups. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> | 17 January 2013, 12:08:45 UTC |
e256036 | Miklos Szeredi | 15 January 2013, 11:24:46 UTC | cuse: fix uninitialized variable warnings Fix the following compiler warnings: fs/fuse/cuse.c: In function 'cuse_process_init_reply': fs/fuse/cuse.c:288:24: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/fuse/cuse.c:272:14: note: 'val' was declared here fs/fuse/cuse.c:284:10: warning: 'key' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/fuse/cuse.c:272:8: note: 'key' was declared here Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> | 17 January 2013, 12:05:52 UTC |
3078358 | David Herrmann | 17 November 2012, 11:45:48 UTC | cuse: do not register multiple devices with identical names Sysfs doesn't allow two devices with the same name, but we register a sysfs entry for each cuse device without checking for name collisions. This extends the registration to first check whether the name was already registered. To avoid race-conditions between the name-check and linking the device, we need to protect the whole registration with a mutex. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> | 17 January 2013, 12:04:57 UTC |
8ce03fd | David Herrmann | 17 November 2012, 11:45:47 UTC | cuse: use mutex as registration lock instead of spinlocks We need to check for name-collisions during cuse-device registration. To avoid race-conditions, this needs to be protected during the whole device registration. Therefore, replace the spinlocks by mutexes first so we can safely extend the locked regions to include more expensive or sleeping code paths. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> | 17 January 2013, 12:04:51 UTC |
11c0cee | Thierry Reding | 14 January 2013, 10:53:20 UTC | gpio: mvebu: Don't free chip label memory The gpio_chip.label field is a const char * and assigned the value of a call to dev_name(). Memory obtained from dev_name() should not be freed by drivers. Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 17 January 2013, 11:27:08 UTC |
6948ce5 | Kukjin Kim | 20 December 2012, 19:08:57 UTC | gpio: samsung: skip gpio lib registration for EXYNOS5440 Since exynos5440 can support pinctrl so skip the legacy gpiolib registration. If not, happens following. WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c() Unknown SoC in gpio-samsung, no GPIOs added Acked-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 17 January 2013, 10:53:54 UTC |
b514407 | Jani Nikula | 17 January 2013, 08:24:09 UTC | drm/i915: fix FORCEWAKE posting reads We stopped reading FORCEWAKE for posting reads in commit 8dee3eea3ccd3b6c00a8d3a08dd715d6adf737dd Author: Ben Widawsky <ben@bwidawsk.net> Date: Sat Sep 1 22:59:50 2012 -0700 drm/i915: Never read FORCEWAKE and started using something from the same cacheline instead. On the bug reporter's machine this broke entering rc6 states after a suspend/resume cycle. It turns out reading ECOBUS as posting read worked fine, while GTFIFODBG did not, preventing RC6 states after suspend/resume per the bug report referenced below. It's not entirely clear why, but clearly GTFIFODBG was nowhere near the same cacheline or address range as FORCEWAKE. Trying out various registers for posting reads showed that all tested registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true work. Conversely, most (but not quite all) registers for which NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced bug. Based on the above, add posting reads on ECOBUS where GTFIFODBG was previously relied on. In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same address range as FORCEWAKE_VLV. v2: Add more details to the commit message. No functional changes. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411 Reported-and-tested-by: Alexander Bersenev <bay@hackerdom.ru> CC: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org [danvet: add cc: stable and make the commit message a bit clearer that this is a regression fix and what exactly broke.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 17 January 2013, 10:09:25 UTC |
dcb9c34 | Kukjin Kim | 27 December 2012, 18:12:30 UTC | gpio: samsung: silent build warning for EXYNOS5 SoCs This patch fixes following warning: drivers/gpio/gpio-samsung.c:450:32: warning: 'exynos_gpio_cfg' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2450:33: warning: 'exynos5_gpios_1' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2618:33: warning: 'exynos5_gpios_2' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2679:33: warning: 'exynos5_gpios_3' defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2715:33: warning: 'exynos5_gpios_4' defined but not used [-Wunused-variable] Because current gpio-samsung is valid only on EXYNOS5250. Cc: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 17 January 2013, 08:18:02 UTC |
e4a5da5 | Kukjin Kim | 27 December 2012, 18:11:10 UTC | gpio: samsung: fix pinctrl condition for exynos and exynos5440 Since EXYNOS5440 can select PINCTRL_EXYNOS5440 without PINCTRL_SAMSUNG, it should be fixed. In detail, PINCTRL_SAMSUNG is a kind of frame work for supporting pinctrl on most Samsung SoCs including S3C, S5P as well except EXYNOS5440 so PINCTRL_EXYNOS5440 has been implemented separated. Cc: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 17 January 2013, 08:17:59 UTC |
e6b267c | Fabio Estevam | 16 January 2013, 12:58:41 UTC | video: imxfb: Do not crash on reboot Issuing a "reboot" command after the LCD times out causes the following warnings: Requesting system reboot ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50() Modules linked in: [<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60) [<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c03960a0>] (clk_disable+0x24/0x50) [<c03960a0>] (clk_disable+0x24/0x50) from [<c02695a0>] (imxfb_disable_controller+0x48/0x7c) [<c02695a0>] (imxfb_disable_controller+0x48/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c) [<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c) [<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48) [<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc) [<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c854f ]--- ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c() Modules linked in: [<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60) [<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) [<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c0396338>] (clk_unprepare+0x1c/0x2c) [<c0396338>] (clk_unprepare+0x1c/0x2c) from [<c02695a8>] (imxfb_disable_controller+0x50/0x7c) [<c02695a8>] (imxfb_disable_controller+0x50/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c) [<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c) [<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48) [<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc) [<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c) ---[ end trace da6b502ca79c8550 ]--- ------------[ cut here ]------------ This happens because "reboot" triggers imxfb_shutdown(), which calls imxfb_disable_controller with the clocks already disabled. To prevent this, add a clock enabled status so that we can check if the clocks are enabled before disabling them. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 17 January 2013, 08:14:29 UTC |
5046e38 | Olof Johansson | 17 January 2013, 03:58:08 UTC | Merge branch 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: That branch fixes build error for S3C24XX/S3C64xx. And corrects dw-mshc properties on EXYNOS5 DT and fixes IRQ mapping on Cragganmore board. * 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore ARM: dts: correct the dw-mshc timing properties as per binding ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled + Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> | 17 January 2013, 03:58:58 UTC |
dfdebc2 | Linus Torvalds | 17 January 2013, 00:19:54 UTC | Merge tag 'for-linus-v3.8-rc4' of git://oss.sgi.com/xfs/xfs Pull xfs bugfixes from Ben Myers: - fix(es) for compound buffers - fix for dquot soft timer asserts due to overflow of d_blk_softlimit - fix for regression in dir v2 code introduced in commit 20f7e9f3726a ("xfs: factor dir2 block read operations") * tag 'for-linus-v3.8-rc4' of git://oss.sgi.com/xfs/xfs: xfs: recalculate leaf entry pointer after compacting a dir2 block xfs: remove int casts from debug dquot soft limit timer asserts xfs: fix the multi-segment log buffer format xfs: fix segment in xfs_buf_item_format_segment xfs: rename bli_format to avoid confusion with bli_formats xfs: use b_maps[] for discontiguous buffers | 17 January 2013, 00:19:54 UTC |
b86dc0d | Dimitris Papastamos | 16 January 2013, 23:49:53 UTC | ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore We are using S3C_EINT(4) instead of S3C_EINT(5). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 16 January 2013, 23:49:53 UTC |
753bd6d | Alim Akhtar | 16 January 2013, 23:41:01 UTC | ARM: dts: correct the dw-mshc timing properties as per binding As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and dw-mshc-ddr-timing properties are having only two cells, these properties are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This patch corrects above timing propreties for above platfroms Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 16 January 2013, 23:45:52 UTC |
c0d6cfd | Tomasz Figa | 10 January 2013, 01:13:23 UTC | ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced. This patch adds ifdef guard around the code making it compile only when CONFIG_S3C_DEV_FB is enabled. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 16 January 2013, 23:45:52 UTC |
309b51e | Linus Torvalds | 16 January 2013, 22:34:52 UTC | Merge tag 'pm+acpi-for-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - cpuidle regression fix related to the initialization of state kobjects from Krzysztof Mazur. - cpuidle fix removing some not very useful code and making some user-visible problems go away at the same time. From Daniel Lezcano. - ACPI build fix from Yinghai Lu. * tag 'pm+acpi-for-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: remove the power_specified field in the driver ACPI / glue: Fix build with ACPI_GLUE_DEBUG set cpuidle: fix number of initialized/destroyed states | 16 January 2013, 22:34:52 UTC |
a73b59c | Uwe Kleine-König | 16 January 2013, 14:32:06 UTC | ARM: compile fix for DEBUG_LL=y && MMU=n debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed out safely. This fixes: arch/arm/kernel/debug.S: Assembler messages: arch/arm/kernel/debug.S:104: Error: too many positional arguments The problem was introduced in e5c5f2a ARM: implement debug_ll_io_init(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 16 January 2013, 22:30:06 UTC |
37f1356 | Eric Sandeen | 10 January 2013, 16:41:48 UTC | xfs: recalculate leaf entry pointer after compacting a dir2 block Dave Jones hit this assert when doing a compile on recent git, with CONFIG_XFS_DEBUG enabled: XFS: Assertion failed: (char *)dup - (char *)hdr == be16_to_cpu(*xfs_dir2_data_unused_tag_p(dup)), file: fs/xfs/xfs_dir2_data.c, line: 828 Upon further digging, the tag found by xfs_dir2_data_unused_tag_p(dup) contained "2" and not the proper offset, and I found that this value was changed after the memmoves under "Use a stale leaf for our new entry." in xfs_dir2_block_addname(), i.e. memmove(&blp[mid + 1], &blp[mid], (highstale - mid) * sizeof(*blp)); overwrote it. What has happened is that the previous call to xfs_dir2_block_compact() has rearranged things; it changes btp->count as well as the blp array. So after we make that call, we must recalculate the proper pointer to the leaf entries by making another call to xfs_dir2_block_leaf_p(). Dave provided a metadump image which led to a simple reproducer (create a particular filename in the affected directory) and this resolves the testcase as well as the bug on his live system. Thanks also to dchinner for looking at this one with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Tested-by: Dave Jones <davej@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> | 16 January 2013, 22:08:55 UTC |
ab7eac2 | Brian Foster | 21 December 2012, 15:45:17 UTC | xfs: remove int casts from debug dquot soft limit timer asserts The int casts here make it easy to trigger an assert with a large soft limit. For example, set a >4TB soft limit on an empty volume to reproduce a (0 > -x) comparison due to an overflow of d_blk_softlimit. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> | 16 January 2013, 22:08:40 UTC |
91e4bac | Mark Tinguely | 04 December 2012, 23:18:05 UTC | xfs: fix the multi-segment log buffer format Per Dave Chinner suggestion, this patch: 1) Corrects the detection of whether a multi-segment buffer is still tracking data. 2) Clears all the buffer log formats for a multi-segment buffer. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> | 16 January 2013, 22:08:08 UTC |
2d0e9df | Mark Tinguely | 04 December 2012, 23:18:04 UTC | xfs: fix segment in xfs_buf_item_format_segment Not every segment in a multi-segment buffer is dirty in a transaction and they will not be outputted. The assert in xfs_buf_item_format_segment() that checks for the at least one chunk of data in the segment to be used is not necessary true for multi-segmented buffers. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> | 16 January 2013, 22:07:56 UTC |
0f22f9d | Mark Tinguely | 04 December 2012, 23:18:03 UTC | xfs: rename bli_format to avoid confusion with bli_formats Rename the bli_format structure to __bli_format to avoid accidently confusing them with the bli_formats pointer. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> | 16 January 2013, 22:07:37 UTC |
d44d9bc | Mark Tinguely | 04 December 2012, 23:18:02 UTC | xfs: use b_maps[] for discontiguous buffers Commits starting at 77c1a08 introduced a multiple segment support to xfs_buf. xfs_trans_buf_item_match() could not find a multi-segment buffer in the transaction because it was looking at the single segment block number rather than the multi-segment b_maps[0].bm.bn. This results on a recursive buffer lock that can never be satisfied. This patch: 1) Changed the remaining b_map accesses to be b_maps[0] accesses. 2) Renames the single segment b_map structure to __b_map to avoid future confusion. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com> | 16 January 2013, 22:07:11 UTC |
9174adb | Andrew Cooper | 16 January 2013, 12:00:55 UTC | xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests. This fixes CVE-2013-0190 / XSA-40 There has been an error on the xen_failsafe_callback path for failed iret, which causes the stack pointer to be wrong when entering the iret_exc error path. This can result in the kernel crashing. In the classic kernel case, the relevant code looked a little like: popl %eax # Error code from hypervisor jz 5f addl $16,%esp jmp iret_exc # Hypervisor said iret fault 5: addl $16,%esp # Hypervisor said segment selector fault Here, there are two identical addls on either option of a branch which appears to have been optimised by hoisting it above the jz, and converting it to an lea, which leaves the flags register unaffected. In the PVOPS case, the code looks like: popl_cfi %eax # Error from the hypervisor lea 16(%esp),%esp # Add $16 before choosing fault path CFI_ADJUST_CFA_OFFSET -16 jz 5f addl $16,%esp # Incorrectly adjust %esp again jmp iret_exc It is possible unprivileged userspace applications to cause this behaviour, for example by loading an LDT code selector, then changing the code selector to be not-present. At this point, there is a race condition where it is possible for the hypervisor to return back to userspace from an interrupt, fault on its own iret, and inject a failsafe_callback into the kernel. This bug has been present since the introduction of Xen PVOPS support in commit 5ead97c84 (xen: Core Xen implementation), in 2.6.23. Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 16 January 2013, 21:17:42 UTC |
3a55fb0 | Kirill Smelkov | 02 November 2012, 11:41:01 UTC | Tell the world we gave up on pushing CC_OPTIMIZE_FOR_SIZE In commit 281dc5c5ec0f ("Give up on pushing CC_OPTIMIZE_FOR_SIZE") we already changed the actual default value, but the help-text still suggested 'y'. Fix the help text too, for all the same reasons. Sadly, -Os keeps on generating some very suboptimal code for certain cases, to the point where any I$ miss upside is swamped by the downside. The main ones are: - using "rep movsb" for memcpy, even on CPU's where that is horrendously bad for performance. - not honoring branch prediction information, so any I$ footprint you win from smaller code, you lose from less code density in the I$. - using divide instructions when that is very expensive. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 January 2013, 20:42:57 UTC |
fbfc23e | Chuansheng Liu | 24 December 2012, 14:19:56 UTC | mfd, TWL4030: TWL4030 need select REGMAP_I2C Fix the build error: drivers/built-in.o: In function `twl_probe': drivers/mfd/twl-core.c:1256: undefined reference to `devm_regmap_init_i2c' make: *** [vmlinux] Error 1 Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [ Samuel is busy, taking it directly - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 January 2013, 20:36:22 UTC |
30a4840 | Ralf Baechle | 15 January 2013, 14:27:46 UTC | drivers/base/cpu.c: Fix typo in comment [ We should make fun of people who can't speel too, but then we'd have no time for any real work at all - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 January 2013, 20:34:34 UTC |
ad6f276 | Olof Johansson | 16 January 2013, 20:27:47 UTC | Merge tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux into fixes From Maxime Ripard: Sunxi dt fixes for 3.8-rc's * tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux: ARM: sunxi: Use the Synosys APB UART instead of ns8250 | 16 January 2013, 20:27:47 UTC |
e65b9ad | Jiri Kosina | 15 January 2013, 19:12:37 UTC | lockdep, rwsem: fix down_write_nest_lock() if !CONFIG_DEBUG_LOCK_ALLOC Commit 1b963c81b145 ("lockdep, rwsem: provide down_write_nest_lock()") contains a bug in a codepath when CONFIG_DEBUG_LOCK_ALLOC is disabled, which causes down_read() to be called instead of down_write() by mistake on such configurations. Fix that. Reported-and-tested-by: Andrew Clayton <andrew@digital-domain.net> Reported-and-tested-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 January 2013, 20:13:20 UTC |
36e7a96 | Linus Torvalds | 16 January 2013, 19:33:52 UTC | Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull second round of sound fixes from Takashi Iwai: "Yet a few more fixes popped up in this week. The biggest change here is the addition of pinctrl support for Atmel, which turned out to be almost mandatory to make things working. The rest are a few fixes for M-Audio usb-audio device and a fix for regression of HD-audio HDMI codecs with alsactl in the recent kernel." * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi - Work around "alsactl restore" errors ALSA: usb-audio: selector map for M-Audio FT C400 ALSA: usb-audio: M-Audio FT C400 skip packet quirk ALSA: usb-audio: correct M-Audio C400 clock source quirk ALSA: usb - fix race in creation of M-Audio Fast track pro driver ASoC: atmel-ssc: add pinctrl selection to driver ARM: at91/dts: add pinctrl support for SSC peripheral | 16 January 2013, 19:33:52 UTC |
ce0f706 | Linus Torvalds | 16 January 2013, 19:13:39 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull scsi target fixes from Nicholas Bellinger: "This includes an important >= v3.6 regression bugfix for active I/O shutdown (Roland), some TMR related failure / corner cases fixes for long outstanding I/O (Roland), two FCoE target mode fabric fabric role fixes (MDR), a fix for an incorrect sense code during LUN communication failure (Dr. Hannes), plus a handful of other minor fixes. There are still some outstanding zero-length control CDB regression fixes that need to be addressed for v3.8, that will be coming in a follow-up PULL request." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn) target: Release se_cmd when LUN lookup fails for TMR target: Fix use-after-free in LUN RESET handling target: Fix missing CMD_T_ACTIVE bit regression for pending WRITEs tcm_fc: Do not report target role when target is not defined tcm_fc: Do not indicate retry capability to initiators target: Use TCM_NO_SENSE for initialisation target: Introduce TCM_NO_SENSE target: use correct sense code for LUN communication failure | 16 January 2013, 19:13:39 UTC |