Skip to main content

Browse the archive

swh:1:snp:49cd9498d6cccc5e78252c27dcb645bcf7bf0c91
sort by:
Revision Author Date Message Commit Date
0a1896b Daniel T Chen 06 June 2011, 22:55:34 UTC ALSA: hda: Fix quirk for Dell Inspiron 910 BugLink: https://launchpad.net/bugs/792712 The original reporter states that sound from the internal speakers is inaudible until using the model=auto quirk. This symptom is due to an existing quirk mask for 0x102802b* that uses the model=dell quirk. To limit the possible regressions, leave the existing quirk mask but add a higher priority specific mask for the reporter's PCI SSID. Reported-and-tested-by: rodni hipp Cc: <stable@kernel.org> [2.6.38+] Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 07 June 2011, 05:26:01 UTC
0aff1c0 GuoWen Li 01 June 2011, 11:18:47 UTC ftrace: Fix possible undefined return code kernel/trace/ftrace.c: In function 'ftrace_regex_write.clone.15': kernel/trace/ftrace.c:2743:6: warning: 'ret' may be used uninitialized in this function Signed-off-by: GuoWen Li <guowen.li.linux@gmail.com> Link: http://lkml.kernel.org/r/201106011918.47939.guowen.li.linux@gmail.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 07 June 2011, 02:34:25 UTC
9c4843e Jeff Layton 06 June 2011, 19:40:23 UTC cifs: silence printk when establishing first session on socket When signing is enabled, the first session that's established on a socket will cause a printk like this to pop: CIFS VFS: Unexpected SMB signature This is because the key exchange hasn't happened yet, so the signature field is bogus. Don't try to check the signature on the socket until the first session has been established. Also, eliminate the specific check for SMB_COM_NEGOTIATE since this check covers that case too. Cc: stable@kernel.org Cc: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 07 June 2011, 00:57:05 UTC
dcc32b8 Dave Airlie 07 June 2011, 00:07:09 UTC Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next into drm-fixes * 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next: drm/nv40: fall back to paged dma object for the moment drm/nouveau: fix leak of gart mm node drm/nouveau: fix vram page mapping when crossing page table boundaries drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901). drm/nouveau: don't create accel engine objects when noaccel=1 drm/nvc0: recognise 0xdX chipsets as NV_C0 07 June 2011, 00:07:09 UTC
79b3891 David S. Miller 07 June 2011, 00:00:35 UTC irda: iriap: Use seperate lockdep class for irias_objects->hb_spinlock The SEQ output functions grab the obj->attrib->hb_spinlock lock of sub-objects found in the hash traversal. These locks are in a different realm than the one used for the irias_objects hash table itself. So put the latter into it's own lockdep class. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 June 2011, 00:00:35 UTC
de52bca Dave Airlie 06 June 2011, 23:54:04 UTC Merge remote branch 'keithp/drm-intel-fixes' of /ssd/git/drm-next into drm-fixes * 'keithp/drm-intel-fixes' of /ssd/git/drm-next: drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007 drm/i915: Share the common force-audio property between connectors drm/i915: Remove unused enum "chip_family" drm/915: fix relaxed tiling on gen2: tile height drm/i915/crt: Explicitly return false if connected to a digital monitor drm/i915: Replace ironlake_compute_wm0 with g4x_compute_wm0 drm/i915: Only print out the actual number of fences for i915_error_state drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/ drm: i915: correct return status in intel_hdmi_mode_valid() drm/i915: fix regression after clock gating init split drm/i915: fix if statement in ivybridge irq handler 06 June 2011, 23:54:04 UTC
3019de1 David S. Miller 06 June 2011, 23:41:33 UTC net: Rework netdev_drivername() to avoid warning. This interface uses a temporary buffer, but for no real reason. And now can generate warnings like: net/sched/sch_generic.c: In function dev_watchdog net/sched/sch_generic.c:254:10: warning: unused variable drivername Just return driver->name directly or "". Reported-by: Connor Hansen <cmdkhh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2011, 23:41:33 UTC
3af51ac Sebastian Andrzej Siewior 03 June 2011, 17:50:48 UTC usb/renesas_usbhs: free uep on removal Can't find evidence that this is actually done. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:28:04 UTC
6bc1295 Sebastian Andrzej Siewior 03 June 2011, 17:50:47 UTC usb/s3c-hsudc: fix error path I doubt the clock is optional. In case it is it should not return with an error code because we leak everything. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:28:03 UTC
a6207b1 Sebastian Andrzej Siewior 03 June 2011, 17:50:46 UTC usb/pxa25x_udc: cleanup the LUBBOCK err path this is more backwords than it has to be. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:28:03 UTC
cb42447 Sebastian Andrzej Siewior 03 June 2011, 17:50:45 UTC usb/mv_udc_core: fix compile |drivers/usb/gadget/mv_udc_core.c:2108: error: label `error' used but not defined This seems to be broken since the initial commit. I changed this to a simple return. The other user is the probe code which lets ->probe() fail on error here. |drivers/usb/gadget/mv_udc_core.c:2107: warning: passing argument 1 of `dev_err' from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2118: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2119: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2130: error: initializer element is not constant |drivers/usb/gadget/mv_udc_core.c:2130: error: (near initialization for `udc_driver.driver.pm') Cc: Chao Xie <chao.xie@marvell.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:28:02 UTC
b38b03b Bryan Wu 02 June 2011, 04:51:29 UTC usb: gadget: include <linux/prefetch.h> to fix compiling error drivers/usb/gadget/at91_udc.c: In function 'write_fifo': drivers/usb/gadget/at91_udc.c:421:2: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/gadget/at91_udc.o] Error 1 make[2]: *** [drivers/usb/gadget] Error 2 make[2]: *** Waiting for unfinished jobs.... Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:27:00 UTC
83a0180 Mark Brown 01 June 2011, 16:16:15 UTC USB: s3c-hsotg: Tone down debugging Currently the s3c-hsotg driver is extremely chatty, producing voluminous with large register dumps even in default operation. Tone this down so we're not chatty unless DEBUG is defined. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:26:59 UTC
1d4a4bd Sage Weil 31 May 2011, 16:11:11 UTC usb: remove bad dput after dentry_unhash Commit 64252c75a (vfs: remove dget() from dentry_unhash()) removed the useless dget from dentry_unhash but didn't fix up this caller in the usb code. There used to be exactly one dput per dentry_unhash call; now there are none. Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:26:59 UTC
4cff3ce Ben Skeggs 01 June 2011, 04:08:49 UTC drm/nv40: fall back to paged dma object for the moment PCI(E)GART isn't quite stable it seems, fall back to old method until I get the time to sort it out properly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 06 June 2011, 23:23:03 UTC
960bdba Ben Skeggs 29 May 2011, 23:28:31 UTC drm/nouveau: fix leak of gart mm node Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 06 June 2011, 23:22:51 UTC
73c337e Ben Skeggs 27 May 2011, 16:12:04 UTC drm/nouveau: fix vram page mapping when crossing page table boundaries Hopefully the cause of nvc0 "page jumping" issue. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 06 June 2011, 23:22:48 UTC
c1003d9 Francisco Jerez 24 May 2011, 13:57:14 UTC drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901). Reported-by: Mario Bachmann <grafgrimm77@gmx.de> Tested-by: Greg Turner <gmturner007@ameritech.net> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 06 June 2011, 23:22:29 UTC
18b54c4 Ben Skeggs 25 May 2011, 05:22:33 UTC drm/nouveau: don't create accel engine objects when noaccel=1 Fixes various potential oopses. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 06 June 2011, 23:22:03 UTC
cdf81a2 Ben Skeggs 25 May 2011, 04:39:52 UTC drm/nvc0: recognise 0xdX chipsets as NV_C0 Should hopefully get modesetting at least from this, it appears these are GF119 chipsets. Accel will come eventually, once I order a board. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 06 June 2011, 23:21:13 UTC
85ec7b9 Colin Cross 06 June 2011, 20:38:18 UTC GPIO: OMAP: add locking around calls to _set_gpio_triggering _set_gpio_triggering uses read-modify-write on bank registers, lock bank->lock around all calls to it to prevent register corruption if two cpus access gpios in the same bank at the same time. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Kevin Hilman <khilman@ti.com> 06 June 2011, 23:12:34 UTC
0622b25 Colin Cross 06 June 2011, 20:38:17 UTC GPIO: OMAP: fix setting IRQWAKEN bits for OMAP4 Setting the IRQWAKEN bit was overwriting previous IRQWAKEN bits, causing only the last bit set to take effect, resulting in lost wakeups when the GPIO controller is in idle. Replace direct writes to IRQWAKEN with MOD_REG_BIT calls to perform a read-modify-write on the register. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Kevin Hilman <khilman@ti.com> 06 June 2011, 23:12:23 UTC
d52b31d Russell King 27 May 2011, 20:56:12 UTC GPIO: OMAP: fix section mismatch warnings WARNING: arch/arm/plat-omap/built-in.o(.devinit.text+0x46c): Section mismatch in reference from the function omap_gpio_probe() to the function .init.text:omap_gpio_chip_init() The function __devinit omap_gpio_probe() references a function __init omap_gpio_chip_init(). If omap_gpio_chip_init is only used by omap_gpio_probe then annotate omap_gpio_chip_init with a matching annotation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kevin Hilman <khilman@ti.com> 06 June 2011, 23:11:55 UTC
3824c1d Libor Pechacek 20 May 2011, 12:53:25 UTC USB: core: Tolerate protocol stall during hub and port status read Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:02:32 UTC
9303961 Mike Frysinger 25 May 2011, 12:13:24 UTC musb: fix prefetch build failure After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/musb_core.c: In function 'musb_write_fifo': drivers/usb/musb/musb_core.c:219: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/musb/musb_core.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 23:02:31 UTC
4061fde Toby Gray 06 June 2011, 13:52:48 UTC USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7 This adds the Nokia E7 and C7 to the list of devices in cdc-acm, allowing the secondary ACM channel on the device to be exposed. Without this patch the ACM driver won't claim this secondary channel as it's marked as having a vendor-specific protocol. Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 22:59:41 UTC
3898115 Alexey Khoroshilov 27 May 2011, 04:37:40 UTC usb-gadget: unlock data->lock mutex on error path in ep_write() ep_write() acquires data->lock mutex in get_ready_ep() and releases it on all paths except for one: when usb_endpoint_xfer_isoc() failed. The patch adds mutex_unlock(&data->lock) at that path. It is similar to commit 00cc7a5 ("usb-gadget: unlock data->lock mutex on error path in ep_read()"), it was not fixed at that time by accident. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 22:59:40 UTC
7e8e62e Torsten Hilbrich 06 June 2011, 13:39:55 UTC USB: option Add blacklist for ZTE K3765-Z (19d2:2002) The funtion option_send_status times out when sending USB messages to the interfaces 0, 1, and 2 of this UMTS stick. This results in a 5s timeout in the function causing other tty operations to feel very sluggish. This patch adds a blacklist entry for these 3 interfaces on the ZTE K3765-Z device. I was also able to reproduce the problem with v2.6.38 and v2.6.39. This is very similar to a problem fixed in commit 7a89e4cb9cdaba92f5fbc509945cf4e3c48db4e2 Author: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Date: Wed Mar 9 09:19:48 2011 +0000 USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626 Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 22:58:57 UTC
5c3e407 Dan Williams 06 June 2011, 21:55:41 UTC option: add Prolink PH300 modem IDs Simple ID addition. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 22:58:15 UTC
15badbc Dan Williams 06 June 2011, 21:22:44 UTC option: add Alcatel X200 to sendsetup blacklist This modem really wants sendsetup blacklisted for interfaces 0 and 1, otherwise the kernel hardlocks for about 10 seconds while waiting for the modem's firmware to respond, which it of course doesn't do. A slight complication here is that TCT (who owns the Alcatel brand) used the same USB IDs for the X200 as the X060s despite the devices having completely different firmware and AT command sets, so we end up adding the X060s to the blacklist at the same time. PSA to OEMs: don't use the same USB IDs for different devices. Really. It makes your kittens cry. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 22:58:14 UTC
cdacb59 Dan Williams 06 June 2011, 21:08:39 UTC option: add Zoom 4597 modem USB IDs Uses Longcheer-based firmware and AT command set. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 06 June 2011, 22:58:14 UTC
eab5404 Greg Kroah-Hartman 06 June 2011, 22:55:57 UTC Merge branch 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: USB: xhci - fix interval calculation for FS isoc endpoints xhci: Disable MSI for some Fresco Logic hosts. xhci: Do not issue device reset when device is not setup xhci: Add defines for hardcoded slot states xhci: Bigendian fix for xhci_check_bandwidth() xhci: Bigendian fix for skip_isoc_td() 06 June 2011, 22:56:11 UTC
5a079c3 Marcus Meissner 06 June 2011, 06:00:07 UTC net/ipv6: check for mistakenly passed in non-AF_INET6 sockaddrs Same check as for IPv4, also do for IPv6. (If you passed in a IPv4 sockaddr_in here, the sizeof check in the line before would have triggered already though.) Signed-off-by: Marcus Meissner <meissner@suse.de> Cc: Reinhard Max <max@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2011, 21:48:16 UTC
8ca695f Lars-Peter Clausen 06 June 2011, 11:38:35 UTC ASoC: AD1836: Fix setting the PCM format Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 06 June 2011, 20:55:10 UTC
2b22b1b David S. Miller 06 June 2011, 20:25:36 UTC Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 06 June 2011, 20:25:36 UTC
5f98ecd FUJITA Tomonori 05 June 2011, 02:47:29 UTC swiotlb: Export swioltb_nr_tbl and utilize it as appropiate. By default the io_tlb_nslabs is set to zero, and gets set to whatever value is passed in via swiotlb_init_with_tbl function. The default value passed in is 64MB. However, if the user provides the 'swiotlb=<nslabs>' the default value is ignored and the value provided by the user is used... Except when the SWIOTLB is used under Xen - there the default value of 64MB is used and the Xen-SWIOTLB has no mechanism to get the 'io_tlb_nslabs' filled out by setup_io_tlb_npages functions. This patch provides a function for the Xen-SWIOTLB to call to see if the io_tlb_nslabs is set and if so use that value. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 06 June 2011, 19:41:16 UTC
51892db Stanislaw Gruszka 06 June 2011, 13:11:30 UTC iwl4965: set tx power after rxon_assoc Setting tx power can be deferred during scan or changing channel. If after that correct tx power settings will not be sent to device, we can observe transmission problems and timeouts. Force to send tx power settings also after partial rxon change, to assure device always be configured with up-to-date settings. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=36492 Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 06 June 2011, 19:24:18 UTC
3bb42a6 Stanislaw Gruszka 04 June 2011, 14:48:54 UTC rt2x00: fix rmmod crash Avoid queue and run autowakeup_work when device is not present anymore. That prevent rmmod and device remove crash introduced by: commit 1c0bcf89d85cc97a0d9ce4cd909351a81fa4fdde Author: Ivo van Doorn <ivdoorn@gmail.com> Date: Sat Apr 30 17:18:18 2011 +0200 rt2x00: Add autowake support for USB hardware Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 06 June 2011, 19:24:18 UTC
42b70a5 Stanislaw Gruszka 26 May 2011, 15:14:22 UTC iwlagn: use cts-to-self protection on 5000 adapters series This patch fixes 802.11n stability and performance regression we have since 2.6.35. It boost performance on my 5GHz N-only network from about 5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz. These are test results of 5x downloading of approximately 700MB iso image: vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110 patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946 This was achieved with NetworkManager configured to do not perform periodical scans, by configuring constant BSSID. With periodical scans, after some time, performance downgrade to unpatched driver level, like in example below: patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683 However patch still make better here, since similar test on unpatched driver make link disconnects with below messages after some time: wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticate with 00:23:69:35:d1:3f (try 3) wlan1: authentication with 00:23:69:35:d1:3f timed out On 2.6.35 kernel patch helps against connection hangs with messages: iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload. iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 06 June 2011, 19:24:17 UTC
ab6a44c John W. Linville 06 June 2011, 18:35:27 UTC Revert "mac80211: Skip tailroom reservation for full HW-crypto devices" This reverts commit aac6af5534fade2b18682a0b9efad1a6c04c34c6. Conflicts: net/mac80211/key.c That commit has a race that causes a warning, as documented in the thread here: http://marc.info/?l=linux-wireless&m=130717684914101&w=2 Signed-off-by: John W. Linville <linville@tuxdriver.com> 06 June 2011, 19:23:53 UTC
f6509b5 Thomas Gleixner 06 June 2011, 19:12:32 UTC Merge branch 'fortglx/3.0/tip/timers/ptp' of git://git.linaro.org/people/jstultz/linux into timers/urgent 06 June 2011, 19:12:32 UTC
4bcbfff Thomas Gleixner 06 June 2011, 19:11:31 UTC Merge branch 'fortglx/3.0/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent 06 June 2011, 19:11:31 UTC
fd137e2 Mark Brown 06 June 2011, 10:26:15 UTC ASoC: Check for NULL register bank in snd_soc_get_cache_val() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> 06 June 2011, 18:34:11 UTC
c111147 John W. Linville 06 June 2011, 17:58:21 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem 06 June 2011, 17:58:21 UTC
243e2dd Darren Salt 06 June 2011, 16:58:16 UTC CIFS ACL support needs CONFIG_KEYS, so depend on it Build fails if CONFIG_KEYS is not selected. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 06 June 2011, 16:58:16 UTC
27c2127 Joerg Roedel 30 May 2011, 13:56:24 UTC x86/amd-iommu: Use only per-device dma_ops Unfortunatly there are systems where the AMD IOMMU does not cover all devices. This breaks with the current driver as it initializes the global dma_ops variable. This patch limits the AMD IOMMU to the devices listed in the IVRS table fixing DMA for devices not covered by the IOMMU. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 06 June 2011, 15:37:27 UTC
957df45 Vasily Averin 06 June 2011, 07:33:12 UTC possible memory corruption in cifs_parse_mount_options() error path after mountdata check frees uninitialized mountdata_copy Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Steve French <sfrench@us.ibm.com> 06 June 2011, 15:31:29 UTC
0de66d5 Joerg Roedel 06 June 2011, 14:04:02 UTC x86/amd-iommu: Fix 3 possible endless loops The driver contains several loops counting on an u16 value where the exit-condition is checked against variables that can have values up to 0xffff. In this case the loops will never exit. This patch fixed 3 such loops. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 06 June 2011, 14:10:15 UTC
6c61cfe Martin Schwidefsky 06 June 2011, 12:14:42 UTC [S390] fix kvm defines for 31 bit compile KVM is not available for 31 bit but the KVM defines cause warnings: arch/s390/include/asm/pgtable.h: In function 'ptep_test_and_clear_user_dirty': arch/s390/include/asm/pgtable.h:817: warning: integer constant is too large for 'unsigned long' type arch/s390/include/asm/pgtable.h:818: warning: integer constant is too large for 'unsigned long' type arch/s390/include/asm/pgtable.h: In function 'ptep_test_and_clear_user_young': arch/s390/include/asm/pgtable.h:837: warning: integer constant is too large for 'unsigned long' type arch/s390/include/asm/pgtable.h:838: warning: integer constant is too large for 'unsigned long' type Add 31 bit versions of the KVM defines to remove the warnings. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 06 June 2011, 12:14:56 UTC
36409f6 Martin Schwidefsky 06 June 2011, 12:14:41 UTC [S390] use generic RCU page-table freeing code Replace the s390 specific rcu page-table freeing code with the generic variant. This requires to duplicate the definition for the struct mmu_table_batch as s390 does not use the generic tlb flush code. While we are at it remove the restriction that page table fragments can not be reused after a single fragment has been freed with rcu and split out allocation and freeing of page tables with pgstes. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 06 June 2011, 12:14:56 UTC
3ec9087 Jan Glauber 06 June 2011, 12:14:40 UTC [S390] qdio: Split SBAL entry flags The qdio SBAL entry flag is made-up of four different values that are independent of one another. Some of the bits are reserved by the hardware and should not be changed by qdio. Currently all four values are overwritten since the SBAL entry flag is defined as an u32. Split the SBAL entry flag into four u8's as defined by the hardware and don't touch the reserved bits. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 06 June 2011, 12:14:56 UTC
9950f8b Christian Borntraeger 06 June 2011, 12:14:39 UTC [S390] kvm-s390: fix stfle facilities numbers >=64 Currently KVM masks out the known good facilities only for the first double word, but passed the 2nd double word without filtering. This breaks some code on newer systems: [ 0.593966] ------------[ cut here ]------------ [ 0.594086] WARNING: at arch/s390/oprofile/hwsampler.c:696 [ 0.594213] Modules linked in: [ 0.594321] Modules linked in: [ 0.594439] CPU: 0 Not tainted 3.0.0-rc1 #46 [ 0.594564] Process swapper (pid: 1, task: 00000001effa8038, ksp: 00000001effafab8) [ 0.594735] Krnl PSW : 0704100180000000 00000000004ab89a (hwsampler_setup+0x75a/0x7b8) [ 0.594910] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3 [ 0.595120] Krnl GPRS: ffffffff00000000 00000000ffffffea ffffffffffffffea 00000000004a98f8 [ 0.595351] 00000000004aa002 0000000000000001 000000000080e720 000000000088b9f8 [ 0.595522] 000000000080d3e8 0000000000000000 0000000000000000 000000000080e464 [ 0.595725] 0000000000000000 00000000005db198 00000000004ab3a2 00000001effafd98 [ 0.595901] Krnl Code: 00000000004ab88c: c0e5000673ca brasl %r14,57a020 [ 0.596071] 00000000004ab892: a7f4fc77 brc 15,4ab180 [ 0.596276] 00000000004ab896: a7f40001 brc 15,4ab898 [ 0.596454] >00000000004ab89a: a7c8ffa1 lhi %r12,-95 [ 0.596657] 00000000004ab89e: a7f4fc71 brc 15,4ab180 [ 0.596854] 00000000004ab8a2: a7f40001 brc 15,4ab8a4 [ 0.597029] 00000000004ab8a6: a7f4ff22 brc 15,4ab6ea [ 0.597230] 00000000004ab8aa: c0200011009a larl %r2,6cb9de [ 0.597441] Call Trace: [ 0.597511] ([<00000000004ab3a2>] hwsampler_setup+0x262/0x7b8) [ 0.597676] [<0000000000875812>] oprofile_arch_init+0x32/0xd0 [ 0.597834] [<0000000000875788>] oprofile_init+0x28/0x74 [ 0.597991] [<00000000001001be>] do_one_initcall+0x3a/0x170 [ 0.598151] [<000000000084fa22>] kernel_init+0x142/0x1ec [ 0.598314] [<000000000057db16>] kernel_thread_starter+0x6/0xc [ 0.598468] [<000000000057db10>] kernel_thread_starter+0x0/0xc [ 0.598606] Last Breaking-Event-Address: [ 0.598707] [<00000000004ab896>] hwsampler_setup+0x756/0x7b8 [ 0.598863] ---[ end trace ce3179037f4e3e5b ]--- So lets also mask the 2nd double word. Facilites 66,76,76,77 should be fine. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 06 June 2011, 12:14:56 UTC
a578b37 Christian Borntraeger 06 June 2011, 12:14:38 UTC [S390] kvm-s390: Fix host crash on misbehaving guests commit 9ff4cfb3fcfd48b49fdd9be7381b3be340853aa4 ([S390] kvm-390: Let kernel exit SIE instruction on work) fixed a problem of commit commit cd3b70f5d4d82f85d1e1d6e822f38ae098cf7c72 ([S390] virtualization aware cpu measurement) but uncovered another one. If a kvm guest accesses guest real memory that doesnt exist, the page fault handler calls the sie hook, which then rewrites the return psw from sie_inst to either sie_exit or sie_reenter. On return, the page fault handler will then detect the wrong access as a kernel fault causing a kernel oops in sie_reenter or sie_exit. We have to add these two addresses to the exception table to allow graceful exits. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 06 June 2011, 12:14:56 UTC
6ac3406 Mark Brown 03 June 2011, 17:20:50 UTC ASoC: Add missing break in WM8915 FLL source selection Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> 06 June 2011, 11:46:52 UTC
1622ee1 Mark Brown 03 June 2011, 16:13:57 UTC ASoC: Only update SYSCLK_ENA when pausing WM8915 SYSCLK Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> 06 June 2011, 11:46:33 UTC
05d3962 Mark Brown 06 June 2011, 09:38:23 UTC Merge branch 'for-3.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-3.0 06 June 2011, 09:38:23 UTC
a50d28d Bruno Prémont 24 May 2011, 19:59:17 UTC video: Fix use-after-free by vga16fb on rmmod Since fb_info is now refcounted and thus may get freed at any time it gets unregistered module unloading will try to unregister framebuffer as stored in platform data on probe though this pointer may be stale. Cleanup platform data on framebuffer release. CC: stable@kernel.org Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 06 June 2011, 09:14:45 UTC
59c5f46 Linus Torvalds 06 June 2011, 09:06:33 UTC Linux 3.0-rc2 06 June 2011, 09:06:33 UTC
e0dcd8a Hugh Dickins 06 June 2011, 05:03:13 UTC mm: fix ENOSPC returned by handle_mm_fault() Al Viro observes that in the hugetlb case, handle_mm_fault() may return a value of the kind ENOSPC when its caller is expecting a value of the kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 June 2011, 09:00:27 UTC
0d6925d Linus Torvalds 06 June 2011, 08:51:28 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: usb - turn off de-emphasis in s/pdif for cm6206 ALSA: asihpi: Use angle brackets for system includes ALSA: fm801: add error handling if auto-detect fails ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd() ALSA: 6fire: Don't leak firmware in error path ASoC: Fix wm_hubs input PGA ZC bits ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared 06 June 2011, 08:51:28 UTC
c12f667 Linus Torvalds 06 June 2011, 08:48:02 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (max6642): Better chip detection schema hwmon: (coretemp) Further relax temperature range checks hwmon: (coretemp) Fix TjMax detection for older CPUs hwmon: (coretemp) Relax target temperature range check hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault 06 June 2011, 08:48:02 UTC
74b5c5b Mike Waychison 03 June 2011, 20:04:53 UTC KVM: Initialize kvm before registering the mmu notifier It doesn't make sense to ever see a half-initialized kvm structure on mmu notifier callbacks. Previously, 85722cda changed the ordering to ensure that the mmu_lock was initialized before mmu notifier registration, but there is still a race where the mmu notifier could come in and try accessing other portions of struct kvm before they are intialized. Solve this by moving the mmu notifier registration to occur after the structure is completely initialized. Google-Bug-Id: 452199 Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Avi Kivity <avi@redhat.com> 06 June 2011, 08:27:52 UTC
221192b Marcelo Tosatti 30 May 2011, 18:23:14 UTC KVM: x86: use proper port value when checking io instruction permission Commit f6511935f42 moved the permission check for io instructions to the ->check_perm callback. It failed to copy the port value from RDX register for string and "in,out ax,dx" instructions. Fix it by reading RDX register at decode stage when appropriate. Fixes FC8.32 installation. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 06 June 2011, 07:52:09 UTC
3190dad Takashi Iwai 06 June 2011, 07:28:49 UTC Merge branch 'fix/asoc' into for-linus 06 June 2011, 07:28:49 UTC
cd3c18b Dmitry Torokhov 31 May 2011, 21:37:23 UTC USB: xhci - fix interval calculation for FS isoc endpoints Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org 06 June 2011, 04:01:38 UTC
85fadea David S. Miller 06 June 2011, 00:14:04 UTC Merge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6 06 June 2011, 00:14:04 UTC
5fb9fb1 Grant Likely 03 June 2011, 21:31:27 UTC net: fix smc91x.c device tree support Fix missing semicolon at end of smc91x.c match tabledevice driver. Also remove unnecessary #ifdef around of_match_table pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2011, 00:02:51 UTC
d232b8d Dave Jones 28 May 2011, 00:36:51 UTC netfilter: use unsigned variables for packet lengths in ip[6]_queue. Netlink message lengths can't be negative, so use unsigned variables. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 05 June 2011, 23:37:16 UTC
88ed01d Pablo Neira Ayuso 02 June 2011, 13:08:45 UTC netfilter: nf_conntrack: fix ct refcount leak in l4proto->error() This patch fixes a refcount leak of ct objects that may occur if l4proto->error() assigns one conntrack object to one skbuff. In that case, we have to skip further processing in nf_conntrack_in(). With this patch, we can also fix wrong return values (-NF_ACCEPT) for special cases in ICMP[v6] that should not bump the invalid/error statistic counters. Reported-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 05 June 2011, 23:37:02 UTC
d9be76f Julian Anastasov 29 May 2011, 20:42:29 UTC netfilter: nf_nat: fix crash in nf_nat_csum Fix crash in nf_nat_csum when mangling packets in OUTPUT hook where skb->dev is not defined, it is set later before POSTROUTING. Problem happens for CHECKSUM_NONE. We can check device from rt but using CHECKSUM_PARTIAL should be safe (skb_checksum_help). Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 05 June 2011, 23:36:46 UTC
b48e3c5 Jozsef Kadlecsik 01 June 2011, 21:35:49 UTC netfilter: ipset: Use the stored first cidr value instead of '1' The stored cidr values are tried one after anoter. The boolean condition evaluated to '1' instead of the first stored cidr or the default host cidr. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 05 June 2011, 23:35:29 UTC
fcbf128 Jozsef Kadlecsik 01 June 2011, 21:35:48 UTC netfilter: ipset: Fix return code for destroy when sets are in use Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 05 June 2011, 23:35:15 UTC
afb523c Julian Anastasov 02 June 2011, 00:09:54 UTC ipvs: restore support for iptables SNAT Fix the IPVS priority in LOCAL_IN hook, so that SNAT target in POSTROUTING is supported for IPVS traffic as in 2.6.36 where it worked depending on module load order. Before 2.6.37 we used priority 100 in LOCAL_IN to process remote requests. We used the same priority as iptables SNAT and if IPVS handlers are installed before SNAT handlers we supported SNAT in POSTROUTING for the IPVS traffic. If SNAT is installed before IPVS, the netfilter handlers are before IPVS and netfilter checks the NAT table twice for the IPVS requests: once in LOCAL_IN where IPS_SRC_NAT_DONE is set and second time in POSTROUTING where the SNAT rules are ignored because IPS_SRC_NAT_DONE was already set in LOCAL_IN. But in 2.6.37 we changed the IPVS priority for LOCAL_IN with the goal to be unique (101) forgetting the fact that for IPVS traffic we should not walk both LOCAL_IN and POSTROUTING nat tables. So, change the priority for processing remote IPVS requests from 101 to 99, i.e. before NAT_SRC (100) because we prefer to support SNAT in POSTROUTING instead of LOCAL_IN. It also moves the priority for IPVS replies from 99 to 98. Use constants instead of magic numbers at these places. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 05 June 2011, 23:35:13 UTC
fb04883 Eric Dumazet 19 May 2011, 13:44:27 UTC netfilter: add more values to enum ip_conntrack_info Following error is raised (and other similar ones) : net/ipv4/netfilter/nf_nat_standalone.c: In function ‘nf_nat_fn’: net/ipv4/netfilter/nf_nat_standalone.c:119:2: warning: case value ‘4’ not in enumerated type ‘enum ip_conntrack_info’ gcc barfs on adding two enum values and getting a not enumerated result : case IP_CT_RELATED+IP_CT_IS_REPLY: Add missing enum values Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: David Miller <davem@davemloft.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 05 June 2011, 23:35:10 UTC
374eeb5 Neil Horman 03 June 2011, 10:35:52 UTC bonding: reset queue mapping prior to transmission to physical device (v5) The bonding driver is multiqueue enabled, in which each queue represents a slave to enable optional steering of output frames to given slaves against the default output policy. However, it needs to reset the skb->queue_mapping prior to queuing to the physical device or the physical slave (if it is multiqueue) could wind up transmitting on an unintended tx queue Change Notes: v2) Based on first pass review, updated the patch to restore the origional queue mapping that was found in bond_select_queue, rather than simply resetting to zero. This preserves the value of queue_mapping when it was set on receive in the forwarding case which is desireable. v3) Fixed spelling an casting error in skb->cb v4) fixed to store raw queue_mapping to avoid double decrement v5) Eric D requested that ->cb access be wrapped in a macro. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2011, 21:31:25 UTC
5b446c6 Sucheta Chakraborty 03 June 2011, 05:52:18 UTC qlcnic: Avoid double free of skb in tx path buffer->skb should be marked NULL to avoid double free of the skb. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2011, 21:18:19 UTC
54ff502 Anirban Chakraborty 02 June 2011, 12:42:21 UTC qlcnic: Fix bug in FW queue dump Due to a change in FW template, a bug was introduced in dump queue entries. This is fixed by reinitializing queue address before looping for each que dump operation. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2011, 21:18:19 UTC
b8f07a0 Al Viro 05 June 2011, 00:54:03 UTC fix return values of l2tp_dfs_seq_open() More fallout from struct net lifetime rules review: PTR_ERR() is *already* negative and failing ->open() should return negatives on failure. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2011, 21:11:09 UTC
c316e6a Al Viro 05 June 2011, 00:37:35 UTC get_net_ns_by_fd() oopses if proc_ns_fget() returns an error BTW, looking through the code related to struct net lifetime rules has caught something else: struct net *get_net_ns_by_fd(int fd) { ... file = proc_ns_fget(fd); if (!file) goto out; ei = PROC_I(file->f_dentry->d_inode); while in proc_ns_fget() we have two return ERR_PTR(...) and not a single path that would return NULL. The other caller of proc_ns_fget() treats ERR_PTR() correctly... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2011, 21:11:09 UTC
f3aecea Alex Deucher 03 June 2011, 20:39:06 UTC drm/radeon/kms/atom: fix PHY init The PHY was not initialized correctly after ac89af1e1010640db072416c786f97391b85790f since the function bailed early as an encoder was not assigned. The encoder isn't necessary for PHY init so just assign to 0 for init so that the table is executed. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Tested-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 05 June 2011, 06:34:13 UTC
0792644 Linus Torvalds 04 June 2011, 23:11:11 UTC Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra * 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: Tegra: Harmony: Fix conflicting GPIO numbering 04 June 2011, 23:11:11 UTC
f2a4d8a Stephen Warren 31 May 2011, 21:14:07 UTC ARM: Tegra: Harmony: Fix conflicting GPIO numbering Currently, both the WM8903 and TPS6586x chips attempt to register with gpiolib using the same GPIO numbers. This causes the audio driver to fail to initialize. To solve this, add a define to board-harmony.h for the TPS6586x, and make board-harmony-power.c use this define, instead of directly referencing TEGRA_NR_GPIOS. This fixes a regression introduced by commit 6f168f2fa60f87e85e0df25e87e2372f22f5eb7c. ARM: tegra: harmony: initialize the TPS65862 PMIC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com> 04 June 2011, 22:51:52 UTC
e6ece70 Linus Torvalds 04 June 2011, 21:17:23 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) btrfs: fix uninitialized variable warning btrfs: add helper for fs_info->closing Btrfs: add mount -o inode_cache btrfs: scrub: add explicit plugging btrfs: use btrfs_ino to access inode number Btrfs: don't save the inode cache if we are deleting this root btrfs: false BUG_ON when degraded Btrfs: don't save the inode cache in non-FS roots Btrfs: make sure we don't overflow the free space cache crc page Btrfs: fix uninit variable in the delayed inode code btrfs: scrub: don't reuse bios and pages Btrfs: leave spinning on lookup and map the leaf Btrfs: check for duplicate entries in the free space cache Btrfs: don't try to allocate from a block group that doesn't have enough space Btrfs: don't always do readahead Btrfs: try not to sleep as much when doing slow caching Btrfs: kill BTRFS_I(inode)->block_group Btrfs: don't look at the extent buffer level 3 times in a row Btrfs: map the node block when looking for readahead targets Btrfs: set range_start to the right start in count_range_bits ... 04 June 2011, 21:17:23 UTC
6a574b5 Hans de Goede 04 June 2011, 13:39:21 UTC drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007 I found this while figuring out why gnome-shell would not run on my Asus EeeBox PC EB1007. As a standalone "pc" this device cleary does not have an internal panel, yet it claims it does. Add a quirk to fix this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:48:45 UTC
3f43c48 Chris Wilson 12 May 2011, 21:17:24 UTC drm/i915: Share the common force-audio property between connectors Make the audio property creation routine common and share the single property between the connectors. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:41:25 UTC
4bce2da Chris Wilson 12 May 2011, 21:17:21 UTC drm/i915: Remove unused enum "chip_family" Superseded by the tracking the render generation in the chipset capabiltiies struct. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:41:18 UTC
c8ebc2b Daniel Vetter 12 May 2011, 21:17:20 UTC drm/915: fix relaxed tiling on gen2: tile height A tile on gen2 has a size of 2kb, stride of 128 bytes and 16 rows. Userspace was broken and assumed 8 rows. Chris Wilson noted that the kernel unfortunately can't reliable check that because libdrm rounds up the size to the next bucket. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:41:12 UTC
d3bcb75 Chris Wilson 12 May 2011, 21:17:15 UTC drm/i915/crt: Explicitly return false if connected to a digital monitor Rather than proceed on and silently return false by default, mention why we rejected the presence of an EDID as implying the presence of a VGA monitor. (The question arises whether there is a broken EDID which falsely reports a digital connection when attached by VGA.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:41:06 UTC
9f40510 Chris Wilson 12 May 2011, 21:17:14 UTC drm/i915: Replace ironlake_compute_wm0 with g4x_compute_wm0 The computation of the first-level watermarks for g4x and gen5+ are based on the same algorithm, so we can refactor those code paths to use a single function. Note that g4x_compute_wm0 takes a 'plane' argument while ironlake_compute_wm0 took a 'pipe' argument. Both should have used a 'plane' argument, so this patch fixes that as well (not that it caused a problem; ironlake always uses pipe == plane). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:40:59 UTC
bf3301a Daniel Vetter 12 May 2011, 21:17:12 UTC drm/i915: Only print out the actual number of fences for i915_error_state Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:40:52 UTC
c8cbbb8 Chris Wilson 12 May 2011, 21:17:11 UTC drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/ Convert our open coded offset_in_page() to the common macro. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:40:42 UTC
5cbba41 Nicolas Kaiser 30 May 2011, 10:48:26 UTC drm: i915: correct return status in intel_hdmi_mode_valid() Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:40:35 UTC
95e0ee9 Jason Stubbs 28 May 2011, 04:26:48 UTC drm/i915: fix regression after clock gating init split During the refactoring in revision 6067aaeadb5b3df26f27ac827256b1ef01e674f5, the intel_enable_clock_gating was split up into several functions that are then called indirectly. However, which function to call was not specified for the IS_PINEVIEW() case. This patch specifies the correct gating function. Signed-off-by: Jason Stubbs <jasonbstubbs@gmail.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:40:26 UTC
f6b07f4 Dan Carpenter 25 May 2011, 09:56:56 UTC drm/i915: fix if statement in ivybridge irq handler The extra semicolon was not intended. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> 04 June 2011, 17:40:17 UTC
942c1a9 Per Dalén 26 May 2011, 13:08:53 UTC hwmon: (max6642): Better chip detection schema Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: Per Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 04 June 2011, 17:34:28 UTC
23c79d3 Linus Torvalds 04 June 2011, 14:19:51 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Fix oops caused by queue refcounting failure 04 June 2011, 14:19:51 UTC
0e833d8 Linus Torvalds 04 June 2011, 14:16:00 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) tg3: Fix tg3_skb_error_unmap() net: tracepoint of net_dev_xmit sees freed skb and causes panic drivers/net/can/flexcan.c: add missing clk_put net: dm9000: Get the chip in a known good state before enabling interrupts drivers/net/davinci_emac.c: add missing clk_put af-packet: Add flag to distinguish VID 0 from no-vlan. caif: Fix race when conditionally taking rtnl lock usbnet/cdc_ncm: add missing .reset_resume hook vlan: fix typo in vlan_dev_hard_start_xmit() net/ipv4: Check for mistakenly passed in non-IPv4 address iwl4965: correctly validate temperature value bluetooth l2cap: fix locking in l2cap_global_chan_by_psm ath9k: fix two more bugs in tx power cfg80211: don't drop p2p probe responses Revert "net: fix section mismatches" drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() sctp: stop pending timers and purge queues when peer restart asoc drivers/net: ks8842 Fix crash on received packet when in PIO mode. ip_options_compile: properly handle unaligned pointer iwlagn: fix incorrect PCI subsystem id for 6150 devices ... 04 June 2011, 14:16:00 UTC
aa0467d David Sterba 03 June 2011, 14:29:08 UTC btrfs: fix uninitialized variable warning With Linus' tree, today's linux-next build (powercp ppc64_defconfig) produced this warning: fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode': fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used uninitialized in this function Introduced by commit 16cdcec736cd ("btrfs: implement delayed inode items operation"). This fixes a bug in btrfs_update_inode(): if the returned value from btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not updated and several call paths may hit a BUG_ON or fail with strange code. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Sterba <dsterba@suse.cz> 04 June 2011, 12:11:38 UTC
7841cb2 David Sterba 31 May 2011, 16:07:27 UTC btrfs: add helper for fs_info->closing wrap checking of filesystem 'closing' flag and fix a few missing memory barriers. Signed-off-by: David Sterba <dsterba@suse.cz> 04 June 2011, 12:11:22 UTC
4b9465c Chris Mason 03 June 2011, 13:36:29 UTC Btrfs: add mount -o inode_cache This makes the inode map cache default to off until we fix the overflow problem when the free space crcs don't fit inside a single page. Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:47 UTC
back to top