https://github.com/torvalds/linux
- v6.14-rc7
- v6.14-rc6
- v6.14-rc5
- v6.14-rc4
- v6.14-rc3
- v6.14-rc2
- v6.14-rc1
- v6.13-rc7
- v6.13-rc6
- v6.13-rc5
- v6.13-rc4
- v6.13-rc3
- v6.13-rc2
- v6.13-rc1
- v6.13
- v6.12-rc7
- v6.12-rc6
- v6.12-rc5
- v6.12-rc4
- v6.12-rc3
- v6.12-rc2
- v6.12-rc1
- v6.12
- v6.11-rc7
- v6.11-rc6
- v6.11-rc5
- v6.11-rc4
- v6.11-rc3
- v6.11-rc2
- v6.11-rc1
- v6.11
- v6.10-rc7
- v6.10-rc6
- v6.10-rc5
- v6.10-rc4
- v6.10-rc3
- v6.10-rc2
- v6.10-rc1
- v6.10
- v6.9-rc7
- v6.9-rc6
- v6.9-rc5
- v6.9-rc4
- v6.9-rc3
- v6.9-rc2
- v6.9-rc1
- v6.9
- v6.8-rc7
- v6.8-rc6
- v6.8-rc5
- v6.8-rc4
- v6.8-rc3
- v6.8-rc2
- v6.8-rc1
- v6.8
- v6.7-rc8
- v6.7-rc7
- v6.7-rc6
- v6.7-rc5
- v6.7-rc4
- v6.7-rc3
- v6.7-rc2
- v6.7-rc1
- v6.7
- v6.6-rc7
- v6.6-rc6
- v6.6-rc5
- v6.6-rc4
- v6.6-rc3
- v6.6-rc2
- v6.6-rc1
- v6.6
- v6.5-rc7
- v6.5-rc6
- v6.5-rc5
- v6.5-rc4
- v6.5-rc3
- v6.5-rc2
- v6.5-rc1
- v6.5
- v6.4-rc7
- v6.4-rc6
- v6.4-rc5
- v6.4-rc4
- v6.4-rc3
- v6.4-rc2
- v6.4-rc1
- v6.4
- v6.3-rc7
- v6.3-rc6
- v6.3-rc5
- v6.3-rc4
- v6.3-rc3
- v6.3-rc2
- v6.3-rc1
- v6.3
- v6.2-rc8
- v6.2-rc7
- v6.2-rc6
- v6.2-rc5
- v6.2-rc4
- v6.2-rc3
- v6.2-rc2
- v6.2-rc1
- v6.2
- v6.1-rc8
- v6.1-rc7
- v6.1-rc6
- v6.1-rc5
- v6.1-rc4
- v6.1-rc3
- v6.1-rc2
- v6.1-rc1
- v6.1
- v6.0-rc7
- v6.0-rc6
- v6.0-rc5
- v6.0-rc4
- v6.0-rc3
- v6.0-rc2
- v6.0-rc1
- v6.0
- v5.19-rc8
- v5.19-rc7
- v5.19-rc6
- v5.19-rc5
- v5.19-rc4
- v5.19-rc3
- v5.19-rc2
- v5.19-rc1
- v5.19
- v5.18-rc7
- v5.18-rc6
- v5.18-rc5
- v5.18-rc4
- v5.18-rc3
- v5.18-rc2
- v5.18-rc1
- v5.18
- v5.17-rc8
- v5.17-rc7
- v5.17-rc6
- v5.17-rc5
- v5.17-rc4
- v5.17-rc3
- v5.17-rc2
- v5.17-rc1
- v5.17
- v5.16-rc8
- v5.16-rc7
- v5.16-rc6
- v5.16-rc5
- v5.16-rc4
- v5.16-rc3
- v5.16-rc2
- v5.16-rc1
- v5.16
- v5.15-rc7
- v5.15-rc6
- v5.15-rc5
- v5.15-rc4
- v5.15-rc3
- v5.15-rc2
- v5.15-rc1
- v5.15
- v5.14-rc7
- v5.14-rc6
- v5.14-rc5
- v5.14-rc4
- v5.14-rc3
- v5.14-rc2
- v5.14-rc1
- v5.14
- v5.13-rc7
- v5.13-rc6
- v5.13-rc5
- v5.13-rc4
- v5.13-rc3
- v5.13-rc2
- v5.13-rc1
- v5.13
- v5.12-rc8
- v5.12-rc7
- v5.12-rc6
- v5.12-rc5
- v5.12-rc4
- v5.12-rc3
- v5.12-rc2
- v5.12-rc1
- v5.12
- v5.11-rc7
- v5.11-rc6
- v5.11-rc5
- v5.11-rc4
- v5.11-rc3
- v5.11-rc2
- v5.11-rc1
- v5.11
- v5.10-rc7
- v5.10-rc6
- v5.10-rc5
- v5.10-rc4
- v5.10-rc3
- v5.10-rc2
- v5.10-rc1
- v5.10
- v5.9-rc8
- v5.9-rc7
- v5.9-rc6
- v5.9-rc5
- v5.9-rc4
- v5.9-rc3
- v5.9-rc2
- v5.9-rc1
- v5.9
- v5.8-rc7
- v5.8-rc6
- v5.8-rc5
- v5.8-rc4
- v5.8-rc3
- v5.8-rc2
- v5.8-rc1
- v5.8
- v5.7-rc7
- v5.7-rc6
- v5.7-rc5
- v5.7-rc4
- v5.7-rc3
- v5.7-rc2
- v5.7-rc1
- v5.7
- v5.6-rc7
- v5.6-rc6
- v5.6-rc5
- v5.6-rc4
- v5.6-rc3
- v5.6-rc2
- v5.6-rc1
- v5.6
- v5.5-rc7
- v5.5-rc6
- v5.5-rc5
- v5.5-rc4
- v5.5-rc3
- v5.5-rc2
- v5.5-rc1
- v5.5
- v5.4-rc8
- v5.4-rc7
- v5.4-rc6
- v5.4-rc5
- v5.4-rc4
- v5.4-rc3
- v5.4-rc2
- v5.4-rc1
- v5.4
- v5.3-rc8
- v5.3-rc7
- v5.3-rc6
- v5.3-rc5
- v5.3-rc4
- v5.3-rc3
- v5.3-rc2
- v5.3-rc1
- v5.3
- v5.2-rc7
- v5.2-rc6
- v5.2-rc5
- v5.2-rc4
- v5.2-rc3
- v5.2-rc2
- v5.2-rc1
- v5.2
- v5.1-rc7
- v5.1-rc6
- v5.1-rc5
- v5.1-rc4
- v5.1-rc3
- v5.1-rc2
- v5.1-rc1
- v5.1
- v5.0-rc8
- v5.0-rc7
- v5.0-rc6
- v5.0-rc5
- v5.0-rc4
- v5.0-rc3
- v5.0-rc2
- v5.0-rc1
- v5.0
- v4.20-rc7
- v4.20-rc6
- v4.20-rc5
- v4.20-rc4
- v4.20-rc3
- v4.20-rc2
- v4.20-rc1
- v4.20
- v4.19-rc8
- v4.19-rc7
- v4.19-rc6
- v4.19-rc5
- v4.19-rc4
- v4.19-rc3
- v4.19-rc2
- v4.19-rc1
- v4.19
- v4.18-rc8
- v4.18-rc7
- v4.18-rc6
- v4.18-rc5
- v4.18-rc4
- v4.18-rc3
- v4.18-rc2
- v4.18-rc1
- v4.18
- v4.17-rc7
- v4.17-rc6
- v4.17-rc5
- v4.17-rc4
- v4.17-rc3
- v4.17-rc2
- v4.17-rc1
- v4.17
- v4.16-rc7
- v4.16-rc6
- v4.16-rc5
- v4.16-rc4
- v4.16-rc3
- v4.16-rc2
- v4.16-rc1
- v4.16
- v4.15-rc9
- v4.15-rc8
- v4.15-rc7
- v4.15-rc6
- v4.15-rc5
- v4.15-rc4
- v4.15-rc3
- v4.15-rc2
- v4.15-rc1
- v4.15
- v4.14-rc8
- v4.14-rc7
- v4.14-rc6
- v4.14-rc5
- v4.14-rc4
- v4.14-rc3
- v4.14-rc2
- v4.14-rc1
- v4.14
- v4.13-rc7
- v4.13-rc6
- v4.13-rc5
- v4.13-rc4
- v4.13-rc3
- v4.13-rc2
- v4.13-rc1
- v4.13
- v4.12-rc7
- v4.12-rc6
- v4.12-rc5
- v4.12-rc4
- v4.12-rc3
- v4.12-rc2
- v4.12-rc1
- v4.12
- v4.11-rc8
- v4.11-rc7
- v4.11-rc6
- v4.11-rc5
- v4.11-rc4
- v4.11-rc3
- v4.11-rc2
- v4.11-rc1
- v4.11
- v4.10-rc8
- v4.10-rc7
- v4.10-rc6
- v4.10-rc5
- v4.10-rc4
- v4.10-rc3
- v4.10-rc2
- v4.10-rc1
- v4.10
- v4.9-rc8
- v4.9-rc7
- v4.9-rc6
- v4.9-rc5
- v4.9-rc4
- v4.9-rc3
- v4.9-rc2
- v4.9-rc1
- v4.9
- v4.8-rc8
- v4.8-rc7
- v4.8-rc6
- v4.8-rc5
- v4.8-rc4
- v4.8-rc3
- v4.8-rc2
- v4.8-rc1
- v4.8
- v4.7-rc7
- v4.7-rc6
- v4.7-rc5
- v4.7-rc4
- v4.7-rc3
- v4.7-rc2
- v4.7-rc1
- v4.7
- v4.6-rc7
- v4.6-rc6
- v4.6-rc5
- v4.6-rc4
- v4.6-rc3
- v4.6-rc2
- v4.6-rc1
- v4.6
- v4.5-rc7
- v4.5-rc6
- v4.5-rc5
- v4.5-rc4
- v4.5-rc3
- v4.5-rc2
- v4.5-rc1
- v4.5
- v4.4-rc8
- v4.4-rc7
- v4.4-rc6
- v4.4-rc5
- v4.4-rc4
- v4.4-rc3
- v4.4-rc2
- v4.4-rc1
- v4.4
- v4.3-rc7
- v4.3-rc6
- v4.3-rc5
- v4.3-rc4
- v4.3-rc3
- v4.3-rc2
- v4.3-rc1
- v4.3
- v4.2-rc8
- v4.2-rc7
- v4.2-rc6
- v4.2-rc5
- v4.2-rc4
- v4.2-rc3
- v4.2-rc2
- v4.2-rc1
- v4.2
- v4.1-rc8
- v4.1-rc7
- v4.1-rc6
- v4.1-rc5
- v4.1-rc4
- v4.1-rc3
- v4.1-rc2
- v4.1-rc1
- v4.1
- v4.0-rc7
- v4.0-rc6
- v4.0-rc5
- v4.0-rc4
- v4.0-rc3
- v4.0-rc2
- v4.0-rc1
- v4.0
- v3.19-rc7
- v3.19-rc6
- v3.19-rc5
- v3.19-rc4
- v3.19-rc3
- v3.19-rc2
- v3.19-rc1
- v3.19
- v3.18-rc7
- v3.18-rc6
- v3.18-rc5
- v3.18-rc4
- v3.18-rc3
- v3.18-rc2
- v3.18-rc1
- v3.18
- v3.17-rc7
- v3.17-rc6
- v3.17-rc5
- v3.17-rc4
- v3.17-rc3
- v3.17-rc2
- v3.17-rc1
- v3.17
- v3.16-rc7
- v3.16-rc6
- v3.16-rc5
- v3.16-rc4
- v3.16-rc3
- v3.16-rc2
- v3.16-rc1
- v3.16
- v3.15-rc8
- v3.15-rc7
- v3.15-rc6
- v3.15-rc5
- v3.15-rc4
- v3.15-rc3
- v3.15-rc2
- v3.15-rc1
- v3.15
- v3.14-rc8
- v3.14-rc7
- v3.14-rc6
- v3.14-rc5
- v3.14-rc4
- v3.14-rc3
- v3.14-rc2
- v3.14-rc1
- v3.14
- v3.13-rc8
- v3.13-rc7
- v3.13-rc6
- v3.13-rc5
- v3.13-rc4
- v3.13-rc3
- v3.13-rc2
- v3.13-rc1
- v3.13
- v3.12-rc7
- v3.12-rc6
- v3.12-rc5
- v3.12-rc4
- v3.12-rc3
- v3.12-rc2
- v3.12-rc1
- v3.12
- v3.11-rc7
- v3.11-rc6
- v3.11-rc5
- v3.11-rc4
- v3.11-rc3
- v3.11-rc2
- v3.11-rc1
- v3.11
- v3.10-rc7
- v3.10-rc6
- v3.10-rc5
- v3.10-rc4
- v3.10-rc3
- v3.10-rc2
- v3.10-rc1
- v3.10
- v3.9-rc8
- v3.9-rc7
- v3.9-rc6
- v3.9-rc5
- v3.9-rc4
- v3.9-rc3
- v3.9-rc2
- v3.9-rc1
- v3.9
- v3.8-rc7
- v3.8-rc6
- v3.8-rc5
- v3.8-rc4
- v3.8-rc3
- v3.8-rc2
- v3.8-rc1
- v3.8
- v3.7-rc8
- v3.7-rc7
- v3.7-rc6
- v3.7-rc5
- v3.7-rc4
- v3.7-rc3
- v3.7-rc2
- v3.7-rc1
- v3.7
- v3.6-rc7
- v3.6-rc6
- v3.6-rc5
- v3.6-rc4
- v3.6-rc3
- v3.6-rc2
- v3.6-rc1
- v3.6
- v3.5-rc7
- v3.5-rc6
- v3.5-rc5
- v3.5-rc4
- v3.5-rc3
- v3.5-rc2
- v3.5-rc1
- v3.5
- v3.4-rc7
- v3.4-rc6
- v3.4-rc5
- v3.4-rc4
- v3.4-rc3
- v3.4-rc2
- v3.4-rc1
- v3.4
- v3.3-rc7
- v3.3-rc6
- v3.3-rc5
- v3.3-rc4
- v3.3-rc3
- v3.3-rc2
- v3.3-rc1
- v3.3
- v3.2-rc7
- v3.2-rc6
- v3.2-rc5
- v3.2-rc4
- v3.2-rc3
- v3.2-rc2
- v3.2-rc1
- v3.2
- v3.1-rc10
- v3.1-rc9
- v3.1-rc8
- v3.1-rc7
- v3.1-rc6
- v3.1-rc5
- v3.1-rc4
- v3.1-rc3
- v3.1-rc2
- v3.1-rc1
- v3.1
- v3.0-rc7
- v3.0-rc6
- v3.0-rc5
- v3.0-rc4
- v3.0-rc3
- v3.0-rc2
- v3.0-rc1
- v3.0
- v2.6.39-rc7
- v2.6.39-rc6
- v2.6.39-rc5
- v2.6.39-rc4
- v2.6.39-rc3
- v2.6.39-rc2
- v2.6.39-rc1
- v2.6.39
- v2.6.38-rc8
- v2.6.38-rc7
- v2.6.38-rc6
- v2.6.38-rc5
- v2.6.38-rc4
- v2.6.38-rc3
- v2.6.38-rc2
- v2.6.38-rc1
- v2.6.38
- v2.6.37-rc8
- v2.6.37-rc7
- v2.6.37-rc6
- v2.6.37-rc5
- v2.6.37-rc4
- v2.6.37-rc3
- v2.6.37-rc2
- v2.6.37-rc1
- v2.6.37
- v2.6.36-rc8
- v2.6.36-rc7
- v2.6.36-rc6
- v2.6.36-rc5
- v2.6.36-rc4
- v2.6.36-rc3
- v2.6.36-rc2
- v2.6.36-rc1
- v2.6.36
- v2.6.35-rc6
- v2.6.35-rc5
- v2.6.35-rc4
- v2.6.35-rc3
- v2.6.35-rc2
- v2.6.35-rc1
- v2.6.35
- v2.6.34-rc7
- v2.6.34-rc6
- v2.6.34-rc5
- v2.6.34-rc4
- v2.6.34-rc3
- v2.6.34-rc2
- v2.6.34-rc1
- v2.6.34
- v2.6.33-rc8
- v2.6.33-rc7
- v2.6.33-rc6
- v2.6.33-rc5
- v2.6.33-rc4
- v2.6.33-rc3
- v2.6.33-rc2
- v2.6.33-rc1
- v2.6.33
- v2.6.32-rc8
- v2.6.32-rc7
- v2.6.32-rc6
- v2.6.32-rc5
- v2.6.32-rc4
- v2.6.32-rc3
- v2.6.32-rc1
- v2.6.32
- v2.6.31-rc9
- v2.6.31-rc8
- v2.6.31-rc7
- v2.6.31-rc6
- v2.6.31-rc5
- v2.6.31-rc4
- v2.6.31-rc3
- v2.6.31-rc2
- v2.6.31-rc1
- v2.6.31
- v2.6.30-rc8
- v2.6.30-rc7
- v2.6.30-rc6
- v2.6.30-rc5
- v2.6.30-rc4
- v2.6.30-rc3
- v2.6.30-rc2
- v2.6.30-rc1
- v2.6.30
- v2.6.29-rc8
- v2.6.29-rc7
- v2.6.29-rc6
- v2.6.29-rc5
- v2.6.29-rc4
- v2.6.29-rc3
- v2.6.29-rc2
- v2.6.29-rc1
- v2.6.29
- v2.6.28-rc9
- v2.6.28-rc8
- v2.6.28-rc7
- v2.6.28-rc6
- v2.6.28-rc5
- v2.6.28-rc4
- v2.6.28-rc3
- v2.6.28-rc2
- v2.6.28-rc1
- v2.6.28
- v2.6.27-rc9
- v2.6.27-rc8
- v2.6.27-rc7
- v2.6.27-rc6
- v2.6.27-rc5
- v2.6.27-rc4
- v2.6.27-rc3
- v2.6.27-rc2
- v2.6.27-rc1
- v2.6.27
- v2.6.26-rc9
- v2.6.26-rc8
- v2.6.26-rc7
- v2.6.26-rc6
- v2.6.26-rc5
- v2.6.26-rc4
- v2.6.26-rc3
- v2.6.26-rc2
- v2.6.26-rc1
- v2.6.26
- v2.6.25-rc9
- v2.6.25-rc8
- v2.6.25-rc7
- v2.6.25-rc6
- v2.6.25-rc5
- v2.6.25-rc4
- v2.6.25-rc3
- v2.6.25-rc2
- v2.6.25-rc1
- v2.6.25
- v2.6.24-rc8
- v2.6.24-rc7
- v2.6.24-rc6
- v2.6.24-rc5
- v2.6.24-rc4
- v2.6.24-rc3
- v2.6.24-rc2
- v2.6.24-rc1
- v2.6.24
- v2.6.23-rc9
- v2.6.23-rc8
- v2.6.23-rc7
- v2.6.23-rc6
- v2.6.23-rc5
- v2.6.23-rc4
- v2.6.23-rc3
- v2.6.23-rc2
- v2.6.23-rc1
- v2.6.23
- v2.6.22-rc7
- v2.6.22-rc6
- v2.6.22-rc5
- v2.6.22-rc4
- v2.6.22-rc3
- v2.6.22-rc2
- v2.6.22-rc1
- v2.6.22
- v2.6.21-rc7
- v2.6.21-rc6
- v2.6.21-rc5
- v2.6.21-rc4
- v2.6.21-rc3
- v2.6.21-rc2
- v2.6.21-rc1
- v2.6.21
- v2.6.20-rc7
- v2.6.20-rc6
- v2.6.20-rc5
- v2.6.20-rc4
- v2.6.20-rc3
- v2.6.20-rc2
- v2.6.20-rc1
- v2.6.20
- v2.6.19-rc6
- v2.6.19-rc5
- v2.6.19-rc4
- v2.6.19-rc3
- v2.6.19-rc2
- v2.6.19-rc1
- v2.6.19
- v2.6.18-rc7
- v2.6.18-rc6
- v2.6.18-rc5
- v2.6.18-rc4
- v2.6.18-rc3
- v2.6.18-rc2
- v2.6.18-rc1
- v2.6.18
- v2.6.17-rc6
- v2.6.17-rc5
- v2.6.17-rc4
- v2.6.17-rc3
- v2.6.17-rc2
- v2.6.17-rc1
- v2.6.17
- v2.6.16-rc6
- v2.6.16-rc5
- v2.6.16-rc4
- v2.6.16-rc3
- v2.6.16-rc2
- v2.6.16-rc1
- v2.6.16
- v2.6.15-rc7
- v2.6.15-rc6
- v2.6.15-rc5
- v2.6.15-rc4
- v2.6.15-rc3
- v2.6.15-rc2
- v2.6.15-rc1
- v2.6.15
- v2.6.14-rc5
- v2.6.14-rc4
- v2.6.14-rc3
- v2.6.14-rc2
- v2.6.14-rc1
- v2.6.14
- v2.6.13-rc7
- v2.6.13-rc6
- v2.6.13-rc5
- v2.6.13-rc4
- v2.6.13-rc3
- v2.6.13-rc2
- v2.6.13-rc1
- v2.6.13
- v2.6.12-rc6
- v2.6.12-rc5
- v2.6.12-rc4
- v2.6.12-rc3
- v2.6.12-rc2
- v2.6.12
- v2.6.11-tree
Take a new snapshot of a software origin
If the archived software origin currently browsed is not synchronized with its upstream version (for instance when new commits have been issued), you can explicitly request Software Heritage to take a new snapshot of it.
Use the form below to proceed. Once a request has been submitted and accepted, it will be processed as soon as possible. You can then check its processing state by visiting this dedicated page.
Processing "take a new snapshot" request ...
To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Hash IDentifiers (SWHIDs) must be used.
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
This interface enables to generate software citations, provided that the root directory of browsed objects contains a citation.cff or codemeta.json file.
Select below a type of object currently browsed in order to generate citations for them.
Generating citation ...
Generating citation ...
Generating citation ...
Revision | Author | Date | Message | Commit Date |
---|---|---|---|---|
4a6908a | Linus Torvalds | 24 December 2008, 23:26:37 UTC | Linux 2.6.28 Happy holidays.. | 24 December 2008, 23:26:37 UTC |
c20137f | Linus Torvalds | 24 December 2008, 18:24:52 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well. V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204 V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking. V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support) V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button | 24 December 2008, 18:24:52 UTC |
1806f82 | Linus Torvalds | 24 December 2008, 18:24:14 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: disable X86_PTRACE_BTS | 24 December 2008, 18:24:14 UTC |
2523659 | Linus Torvalds | 24 December 2008, 18:23:21 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add missing terminators in patch_sigmatel.c | 24 December 2008, 18:23:21 UTC |
574f3c4 | Herton Ronaldo Krzesinski | 23 December 2008, 18:53:00 UTC | ALSA: hda - Add missing terminators in patch_sigmatel.c Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> | 24 December 2008, 10:03:56 UTC |
40f15ad | Ingo Molnar | 24 December 2008, 09:49:51 UTC | x86: disable X86_PTRACE_BTS there's a new ptrace arch level feature in .28: config X86_PTRACE_BTS bool "Branch Trace Store" it has broken fork() handling: the old DS area gets copied over into a new task without clearing it. Fixes exist but they came too late: c5dee61: x86, bts: memory accounting bf53de9: x86, bts: add fork and exit handling and are queued up for v2.6.29. This shows that the facility is still not tested well enough to release into a stable kernel - disable it for now and reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS facilities too - hopefully resulting in better code. Signed-off-by: Ingo Molnar <mingo@elte.hu> | 24 December 2008, 09:49:51 UTC |
5289f46 | Kyle McMartin | 23 December 2008, 13:44:30 UTC | parisc: disable UP-optimized flush_tlb_mm flush_tlb_mm's "optimized" uniprocessor case of allocating a new context for userspace is exposing a race where we can suddely return to a syscall with the protection id and space id out of sync, trapping on the next userspace access. Debugged-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 24 December 2008, 01:03:21 UTC |
8960223 | Linus Torvalds | 24 December 2008, 01:01:40 UTC | Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fix correctness of irq_enabled check for radeon. | 24 December 2008, 01:01:40 UTC |
d519c8d | Harry Ciao | 23 December 2008, 21:57:16 UTC | edac: fix edac core deadlock when removing a device When deleting an edac device, we have to wait for its edac_dev.work to be completed before deleting the whole edac_dev structure. Since we have no idea which work in current edac_poller's workqueue is the work we are conerned about, we wait for all work in the edac_poller's workqueue to be proceseed. This is done via flush_cpu_workqueue() which inserts a wq_barrier into the tail of the workqueue and then sleeping on the completion of this wq_barrier. The edac_poller will wake up sleepers when it is found. EDAC core creates only one kernel worker thread, edac_poller, to run the works of all current edac devices. They share the same callback function of edac_device_workq_function(), which would grab the mutex of device_ctls_mutex first before it checks the device. This is exactly where edac_poller and rmmod would have a great chance to deadlock. In below call trace of rmmod > ... > edac_device_del_device > edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue, device_ctls_mutex would have already been grabbed by edac_device_del_device(). So, on one hand rmmod would sleep on the completion of a wq_barrier, holding device_ctls_mutex; on the other hand edac_poller would be blocked on the same mutex when it's running any one of works of existing edac evices(Note, this edac_dev.work is likely to be totally irrelevant to the one that is being removed right now)and never would have a chance to run the work of above wq_barrier to wake rmmod up. edac_device_workq_teardown() should not be called within the critical region of device_ctls_mutex. Just like is done in edac_pci_del_device() and edac_mc_del_mc(), where edac_pci_workq_teardown() and edac_mc_workq_teardown() are called after related mutex are released. Moreover, an edac_dev.work should check first if it is being removed. If this is the case, then it should bail out immediately. Since not all of existing edac devices are to be removed, this "shutting flag" should be contained to edac device being removed. The current edac_dev.op_state can be used to serve this purpose. The original deadlock problem and the solution have been witnessed and tested on actual hardware. Without the solution, rmmod an edac driver would result in below deadlock: root@localhost:/root> rmmod mv64x60_edac EDAC DEBUG: mv64x60_dma_err_remove() EDAC DEBUG: edac_device_del_device() EDAC DEBUG: find_edac_device_by_dev() (hang for a moment) INFO: task edac-poller:2030 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. edac-poller D 00000000 0 2030 2 Call Trace: [df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable) [df159e80] [c000a024] __switch_to+0x6c/0xa0 [df159ea0] [c03587d8] schedule+0x2f4/0x4d8 [df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174 [df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core] [df159f60] [c003beb4] run_workqueue+0x114/0x218 [df159f90] [c003c674] worker_thread+0x5c/0xc8 [df159fd0] [c004106c] kthread+0x5c/0xa0 [df159ff0] [c0013538] original_kernel_thread+0x44/0x60 INFO: task rmmod:2062 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. rmmod D 0ff2c9fc 0 2062 1839 Call Trace: [df119c00] [c0437a74] 0xc0437a74 (unreliable) [df119cc0] [c000a024] __switch_to+0x6c/0xa0 [df119ce0] [c03587d8] schedule+0x2f4/0x4d8 [df119d40] [c03591dc] schedule_timeout+0xb0/0xf4 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 December 2008, 23:58:21 UTC |
20ca9b3 | Li Zefan | 23 December 2008, 21:57:14 UTC | cgroups: avoid accessing uninitialized data in failure path If cgroup_get_rootdir() failed, free_cg_links() will be called in the failure path, but tmp_cg_links hasn't been initialized at that time. I introduced this bug in the 2.6.27 merge window. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 December 2008, 23:58:21 UTC |
e368d3a | Sharyathi Nagesh | 23 December 2008, 21:57:12 UTC | cgroups: suppress bogus warning messages Remove spurious warning messages that are thrown onto the console during cgroup operations. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Sharyathi Nagesh <sharyathi@in.ibm.com> Acked-by: Serge E. Hallyn <serge@hallyn.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 December 2008, 23:58:21 UTC |
f00a189 | Evgeniy Polyakov | 23 December 2008, 21:57:12 UTC | w1: fix slave selection on big-endian systems During test of the w1-gpio driver i found that in "w1.c:679 w1_slave_found()" the device id is converted to little-endian with "cpu_to_le64()", but its not converted back to cpu format in "w1_io.c:293 w1_reset_select_slave()". Based on a patch created by Andreas Hummel. [akpm@linux-foundation.org: remove unneeded cast] Reported-by: Andreas Hummel <andi_hummel@gmx.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 December 2008, 23:58:21 UTC |
cc6c2ca | Chris Elston | 23 December 2008, 21:57:10 UTC | rtc: rtc-isl1208: reject invalid dates This patch for the rtc-isl1208 driver makes it reject invalid dates. Signed-off-by: Chris Elston <celston@katalix.com> [a.zummo@towertech.it: added comment explaining the check] Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Hebert Valerio Riedel <hvr@gnu.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 December 2008, 23:58:21 UTC |
231ffc9 | Devin Heitmueller | 17 December 2008, 02:09:35 UTC | V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command Fix a NULL pointer dereference that would occur if the video decoder tied to the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver) Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 23 December 2008, 11:13:50 UTC |
077ebed | Dave Airlie | 22 December 2008, 07:11:02 UTC | drm/radeon: fix correctness of irq_enabled check for radeon. This check was introduced with the logic the wrong way around. Fixes regression: http://bugzilla.kernel.org/show_bug.cgi?id=12216 Tested-by: François Valenduc <francois.valenduc@tvcablenet.be> Signed-off-by: Dave Airlie <airlied@redhat.com> | 23 December 2008, 00:50:12 UTC |
c47a75a | Linus Torvalds | 22 December 2008, 22:52:00 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: don't cond_resched() when irqs_disabled() ACPI: fix 2.6.28 acpi.debug_level regression | 22 December 2008, 22:52:00 UTC |
0099f77 | Linus Torvalds | 22 December 2008, 22:40:48 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test | 22 December 2008, 22:40:48 UTC |
9ecab6e | Julia Lawall | 22 December 2008, 22:05:06 UTC | drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 22 December 2008, 22:05:06 UTC |
2e85696 | Linus Torvalds | 22 December 2008, 18:17:19 UTC | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: MIPS64R2: Fix buggy __arch_swab64 MIPS: Fix preprocessor warnings flaged by GCC 4.4 | 22 December 2008, 18:17:19 UTC |
7ef5f41 | Linus Torvalds | 22 December 2008, 18:12:54 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ppp: fix segfaults introduced by netdev_priv changes net: Fix module refcount leak in kernel_accept() | 22 December 2008, 18:12:54 UTC |
ed2b03e | David Daney | 17 December 2008, 21:28:39 UTC | MIPS: MIPS64R2: Fix buggy __arch_swab64 The way the code is written it was assuming dshd has the function of a hypothetical dshw instruction ... Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 22 December 2008, 08:54:47 UTC |
08d9d1c | David Daney | 18 December 2008, 02:19:18 UTC | MIPS: Fix preprocessor warnings flaged by GCC 4.4 Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 22 December 2008, 08:54:47 UTC |
3d44cc3 | Thomas Gleixner | 20 December 2008, 20:27:34 UTC | Null pointer deref with hrtimer_try_to_cancel() Impact: Prevent kernel crash with posix timer clockid CLOCK_MONOTONIC_RAW commit 2d42244ae71d6c7b0884b5664cf2eda30fb2ae68 (clocksource: introduce CLOCK_MONOTONIC_RAW) introduced a new clockid, which is only available to read out the raw not NTP adjusted system time. The above commit did not prevent that a posix timer can be created with that clockid. The timer_create() syscall succeeds and initializes the timer to a non existing hrtimer base. When the timer is deleted either by timer_delete() or by the exit() cleanup the kernel crashes. Prevent the creation of timers for CLOCK_MONOTONIC_RAW by setting the posix clock function to no_timer_create which returns an error code. Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 December 2008, 22:13:45 UTC |
ab65387 | Linus Torvalds | 20 December 2008, 19:07:31 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: change simple_strtol to simple_strtoul 9p: convert d_iname references to d_name.name 9p: Remove potentially bad parameter from function entry debug print. | 20 December 2008, 19:07:31 UTC |
e6a997e | Linus Torvalds | 20 December 2008, 19:07:18 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix resume (S2R) broken by Intel microcode module, on A110L x86 gart: don't complain if no AMD GART found AMD IOMMU: panic if completion wait loop fails AMD IOMMU: set cmd buffer pointers to zero manually x86: re-enable MCE on secondary CPUS after suspend/resume AMD IOMMU: allocate rlookup_table with __GFP_ZERO | 20 December 2008, 19:07:18 UTC |
280a9ca | Dmitry Adamushko | 19 December 2008, 23:15:24 UTC | x86: fix resume (S2R) broken by Intel microcode module, on A110L Impact: fix deadlock This is in response to the following bug report: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12100 Subject : resume (S2R) broken by Intel microcode module, on A110L Submitter : Andreas Mohr <andi@lisas.de> Date : 2008-11-25 08:48 (19 days old) Handled-By : Dmitry Adamushko <dmitry.adamushko@gmail.com> [ The deadlock scenario has been discovered by Andreas Mohr ] I think I might have a logical explanation why the system: (http://bugzilla.kernel.org/show_bug.cgi?id=12100) might hang upon resuming, OTOH it should have likely hanged each and every time. (1) possible deadlock in microcode_resume_cpu() if either 'if' section is taken; (2) now, I don't see it in spec. and can't experimentally verify it (newer ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should be back to its original one (we need to reload ucode anyway so it doesn't seem logical if a cpu doesn't drop the version)... if so, the comparison with memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of the aforementioned 'if' sections might have been triggered - leading to a deadlock. Obviously, in my tests I simulated loading/resuming with the ucode of the same version (just to see that the file is loaded/re-loaded upon resuming) so this issue has never popped up. I'd appreciate if someone with an appropriate system might give a try to the 2nd patch (titled "fix a comparison && deadlock..."). In any case, the deadlock situation is a must-have fix. Reported-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Tested-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 20 December 2008, 13:29:20 UTC |
f1d9e45 | Julia Lawall | 19 December 2008, 22:50:22 UTC | fs/9p: change simple_strtol to simple_strtoul Since v9ses->uid is unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Eric Van Hensbergen <ericvh@gmail.com> | 19 December 2008, 22:50:22 UTC |
7dd0cdc | Wu Fengguang | 19 December 2008, 22:47:40 UTC | 9p: convert d_iname references to d_name.name d_iname is rubbish for long file names. Use d_name.name in printks instead. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Acked-by: Eric Van Hensbergen <ericvh@gmail.com> | 19 December 2008, 22:47:40 UTC |
6ff2320 | Duane Griffin | 19 December 2008, 22:45:21 UTC | 9p: Remove potentially bad parameter from function entry debug print. Signed-off-by: Duane Griffin <duaneg@dghda.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> | 19 December 2008, 22:45:21 UTC |
9a1d103 | Linus Torvalds | 19 December 2008, 19:37:23 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt fusion: clear list of outstanding commands on host reset [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock [SCSI] ibmvstgt: move crq_queue_create to the end of initialization [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S | 19 December 2008, 19:37:23 UTC |
8837e34 | Linus Torvalds | 19 December 2008, 19:37:07 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix a Oops bug in omap soc driver. ALSA: hda - Remove non-working headphone control for Dell laptops ALSA: hda - Add no-jd model for IDT 92HD73xx ALSA: Revert "ALSA: hda: removed unneeded hp_nid references" ALSA: hda - Add quirk for Dell Studio 17 ALSA: hda - Fix silent HP output on D975 | 19 December 2008, 19:37:07 UTC |
281981c | Linus Torvalds | 19 December 2008, 19:36:49 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix problem that deleting multiple logical drives could cause a panic | 19 December 2008, 19:36:49 UTC |
f3485c8 | Linus Torvalds | 19 December 2008, 19:36:04 UTC | Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: GEM on PAE has problems - disable it for now. drm/i915: Don't return busy for buffers left on the flushing list. | 19 December 2008, 19:36:04 UTC |
db873cf | Linus Torvalds | 19 December 2008, 19:34:36 UTC | Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md: Don't read past end of bitmap when reading bitmap. | 19 December 2008, 19:34:36 UTC |
eae34c6 | Linus Torvalds | 19 December 2008, 19:33:10 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: ibmphp: Fix module ref count underflow PCI hotplug: acpiphp wants a 64-bit _SUN PCI: pciehp: fix unexpected power off with pciehp_force PCI: fix aer resume sanity check | 19 December 2008, 19:33:10 UTC |
5bd9c69 | Takashi Iwai | 19 December 2008, 14:37:12 UTC | Merge branch 'fix/asoc' into for-linus | 19 December 2008, 14:37:12 UTC |
19b3f31 | Stanley Miao | 19 December 2008, 14:08:22 UTC | ALSA: Fix a Oops bug in omap soc driver. There will be a Oops or frequent underrun messages when playing music with omap soc driver, this is because a data region is incorretly sized, other data region will be overwriten when writing to this data region. Signed-off-by: Stanley Miao <stanley.miao@windriver.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 December 2008, 14:36:35 UTC |
8f55c1e | Takashi Iwai | 19 December 2008, 13:02:32 UTC | ALSA: hda - Remove non-working headphone control for Dell laptops The previous commit re-enabled hp_nid setup for IDT92HD73*, but it's unneeded indeed for Dell laptops that have multiple headphones. Setting the extra hp_nid results in a non-working "Headpohne" mixer control. Thus hp_nid should be 0 for these dell models. Also, the automatic addition of hp_nid should check whether it's a dual-HP model or not. For dual-HPs, the pins are already checked by the early workaround. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 December 2008, 13:23:08 UTC |
abe1dfa | Wu Fengguang | 26 November 2008, 06:35:22 UTC | ACPI: don't cond_resched() when irqs_disabled() The ACPI interpreter usually runs with irqs enabled. However, during suspend/resume it runs with irqs disabled to evaluate _GTS/_BFS, as well as by irqrouter_resume() which evaluates _CRS, _PRS, _SRS. http://bugzilla.kernel.org/show_bug.cgi?id=12252 Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 19 December 2008, 09:38:33 UTC |
e76f427 | Bjorn Helgaas | 13 November 2008, 23:30:13 UTC | ACPI: fix 2.6.28 acpi.debug_level regression acpi_early_init() was changed to over-write the cmdline param, making it really inconvenient to set debug flags at boot-time. Also, This sets the default level to "info", which is what all the ACPI drivers use. So to enable messages from drivers, you only have to supply the "layer" (a.k.a. "component"). For non-"info" ACPI core and ACPI interpreter messages, you have to supply both level and layer masks, as before. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> | 19 December 2008, 09:38:32 UTC |
9e43f0d | Takashi Iwai | 17 December 2008, 13:51:01 UTC | ALSA: hda - Add no-jd model for IDT 92HD73xx Added the model without the jack-detection for some desktops that have really no jack-detection. The recent driver caused regressions regarding the sound output on such machines. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 December 2008, 07:22:26 UTC |
85f13b6 | Takashi Iwai | 19 December 2008, 07:20:38 UTC | ALSA: Revert "ALSA: hda: removed unneeded hp_nid references" This reverts commit 07f455f779acfb3eba4921fd1399761559b10fa9. ALSA: hda: removed unneeded hp_nid references Removed unneeded hp_nid references for 92hd73xx codec family. This caused the silent output on some Intel desktops due to missing routing of widget 0x0a and 0x0d. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 December 2008, 07:20:38 UTC |
d8a0be6 | Stephen M. Cameron | 18 December 2008, 13:55:11 UTC | cciss: fix problem that deleting multiple logical drives could cause a panic Fix problem that deleting multiple logical drives could cause a panic. It fixes a panic which can be easily reproduced in the following way: Just create several "arrays," each with multiple logical drives via hpacucli, then delete the first array, and it will blow up in deregister_disk(), in the call to get_host() when it tries to dig the hba pointer out of a NULL queue pointer. The problem has been present since my code to make rebuild_lun_table behave better went in. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> | 19 December 2008, 07:14:07 UTC |
fa620e9 | Joerg Schirottke | 19 December 2008, 07:13:49 UTC | ALSA: hda - Add quirk for Dell Studio 17 Added the matching model=dell-m6 for Dell Studio 17 laptop. Signed-off-by: Joerg Schirottke <master@kanotix.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 December 2008, 07:13:49 UTC |
ac5c4e7 | Dave Airlie | 19 December 2008, 05:38:34 UTC | drm/i915: GEM on PAE has problems - disable it for now. On PAE systems, GEM allocates pages using shmem, and passes these pages to be bound into AGP, however the AGP interfaces + the x86 set_memory interfaces all take unsigned long not dma_addr_t. The initial fix for this was a mess, so we need to do this correctly for 2.6.29. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 December 2008, 05:38:34 UTC |
c4de0a5 | Eric Anholt | 15 December 2008, 03:05:04 UTC | drm/i915: Don't return busy for buffers left on the flushing list. These buffers don't have active rendering still occurring to them, they just need either a flush to be emitted or a retire_requests to occur so that we notice they're done. Return unbusy so that one of the two occurs. The two expected consumers of this interface (OpenGL and libdrm_intel BO cache) both want this behavior. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 December 2008, 05:34:32 UTC |
a2ed961 | NeilBrown | 19 December 2008, 05:25:01 UTC | md: Don't read past end of bitmap when reading bitmap. When we read the write-intent-bitmap off the device, we currently read a whole number of pages. When PAGE_SIZE is 4K, this works due to the alignment we enforce on the superblock and bitmap. When PAGE_SIZE is 64K, this case read past the end-of-device which causes an error. When we write the superblock, we ensure to clip the last page to just be the required size. Copy that code into the read path to just read the required number of sectors. Signed-off-by: Neil Brown <neilb@suse.de> Cc: stable@kernel.org | 19 December 2008, 05:25:01 UTC |
739840d | James Chapman | 17 December 2008, 12:02:16 UTC | ppp: fix segfaults introduced by netdev_priv changes This patch fixes a segfault in ppp_shutdown_interface() and ppp_destroy_interface() when a PPP connection is closed. I bisected the problem to the following commit: commit c8019bf3aff653cceb64f66489fc299ee5957b57 Author: Wang Chen <wangchen@cn.fujitsu.com> Date: Thu Nov 20 04:24:17 2008 -0800 netdevice ppp: Convert directly reference of netdev->priv 1. Use netdev_priv(dev) to replace dev->priv. 2. Alloc netdev's private data by alloc_netdev(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> The original ppp_generic code treated the netdev and struct ppp as independent data structures which were freed separately. In moving the ppp struct into the netdev, it is now possible for the private data to be freed before the call to ppp_shutdown_interface(), which is bad. The kfree(ppp) in ppp_destroy_interface() is also wrong; presumably ppp hasn't worked since the above commit. The following patch fixes both problems. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2008, 03:41:42 UTC |
1b08534 | Wei Yongjun | 19 December 2008, 03:35:10 UTC | net: Fix module refcount leak in kernel_accept() The kernel_accept() does not hold the module refcount of newsock->ops->owner, so we need __module_get(newsock->ops->owner) code after call kernel_accept() by hand. In sunrpc, the module refcount is missing to hold. So this cause kernel panic. Used following script to reproduct: while [ 1 ]; do mount -t nfs4 192.168.0.19:/ /mnt touch /mnt/file umount /mnt lsmod | grep ipv6 done This patch fixed the problem by add __module_get(newsock->ops->owner) to kernel_accept(). So we do not need to used __module_get(newsock->ops->owner) in every place when used kernel_accept(). Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2008, 03:35:10 UTC |
929096f | Linus Torvalds | 19 December 2008, 01:20:13 UTC | Linux 2.6.28-rc9 | 19 December 2008, 01:20:13 UTC |
59da1f8 | Linus Torvalds | 18 December 2008, 20:05:53 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: async_xor: dma_map destination DMA_BIDIRECTIONAL dmaengine: protect 'id' from concurrent registrations ioat: wait for self-test completion | 18 December 2008, 20:05:53 UTC |
69098ba | Linus Torvalds | 18 December 2008, 20:01:02 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: favr-32 build fix ATSTK1006: Fix boot from NAND flash avr32: remove .note.gnu.build-id section when making vmlinux.bin avr32: Enable pullup on USART TX lines | 18 December 2008, 20:01:02 UTC |
b3806c3 | Linus Torvalds | 18 December 2008, 20:00:46 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2: Fix bug in bnx2_free_rx_mem(). irda: Add irda_skb_cb qdisc related padding jme: Fixed a typo net: kernel BUG at drivers/net/phy/mdio_bus.c:165! drivers/net: starfire: Fix napi ->poll() weight handling tlan: Fix pci memory unmapping enc28j60: use netif_rx_ni() to deliver RX packets tlan: Fix small (< 64 bytes) datagram transmissions netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC | 18 December 2008, 20:00:46 UTC |
3653b9a | Linus Torvalds | 18 December 2008, 20:00:01 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: We need to implement arch_ptrace_stop(). | 18 December 2008, 20:00:01 UTC |
52af894 | John McCutchan | 18 December 2008, 01:43:02 UTC | Maintainer email fixes for inotify Update John McCutchan and Robert Love's email addresses for maintenance of inotify Signed-off-by: John McCutchan <john@johnmccutchan.com> Acked-by: Robert Love <rlove@rlove.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2008, 19:59:34 UTC |
8983fdb | Haavard Skinnemoen | 18 December 2008, 15:20:47 UTC | avr32: favr-32 build fix The favr-32 board code still refers to the old asm/arch header files which were moved to mach/ some time ago. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 18 December 2008, 15:22:13 UTC |
de13d28 | Haavard Skinnemoen | 18 December 2008, 15:13:24 UTC | ATSTK1006: Fix boot from NAND flash Enable JFFS2 write buffer support so that the kernel can access a root filesystem in NAND flash. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 18 December 2008, 15:13:24 UTC |
c9bc03a | Ingo Molnar | 18 December 2008, 12:28:11 UTC | Merge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent | 18 December 2008, 12:28:11 UTC |
55aab5f | Bjorn Helgaas | 17 December 2008, 19:52:34 UTC | x86 gart: don't complain if no AMD GART found Impact: remove annoying bootup printk It's perfectly normal for no AMD GART to be present, e.g., if you have Intel CPUs. None of the other iommu_init() functions makes noise when it finds nothing. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 18 December 2008, 12:26:23 UTC |
e28d832 | Takashi Iwai | 17 December 2008, 12:48:29 UTC | ALSA: hda - Fix silent HP output on D975 Some desktops seems to have no HP/mic jack detection on the front panel, which results in the silent output in the recent driver, because the driver mutes the output (to save power) when no plug is detected. This patch adds a new model that disables the jack-detection. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 December 2008, 08:06:29 UTC |
3298a73 | Michael Chan | 18 December 2008, 03:06:08 UTC | bnx2: Fix bug in bnx2_free_rx_mem(). DMA memory for the jumbo rx page rings was freed incorrectly using the wrong local variable as the array index. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2008, 03:06:08 UTC |
3e3d0e9 | Neil Horman | 18 December 2008, 00:07:47 UTC | PCI hotplug: ibmphp: Fix module ref count underflow I happened to notice that the ibmphp hotplug driver does something rather silly in its init routine. It purposely calls module_put so as to underflow its module ref count to avoid being removed from the kernel. This is bad practice, and wrong, since it provides a window for subsequent module_gets to reset the refcount to zero, allowing an unload to race in and cause all sorts of mysterious panics. If the module is unsafe to load, simply omitting the module_exit parameter is sufficient to prevent the kernel from allowing the unload. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> | 18 December 2008, 00:07:47 UTC |
69c30e1 | Samuel Ortiz | 17 December 2008, 23:44:58 UTC | irda: Add irda_skb_cb qdisc related padding We need to pad irda_skb_cb in order to keep it safe accross dev_queue_xmit() calls. This is some ugly and temporary hack triggered by recent qisc code changes. Even though it fixes bugzilla.kernel.org bug #11795, it will be replaced by a proper fix before 2.6.29 is released. Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 17 December 2008, 23:44:58 UTC |
55dac3a | Linus Torvalds | 17 December 2008, 23:05:26 UTC | Merge branch 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux * 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-s3c2410: fix check for being in suspend. i2c-cpm: Detect and report NAK right away instead of timing out | 17 December 2008, 23:05:26 UTC |
0bc77ec | Linus Torvalds | 17 December 2008, 23:01:23 UTC | Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Add JBD2 compat feature bit. ocfs2: Always update xattr search when creating bucket. | 17 December 2008, 23:01:23 UTC |
3797455 | Linus Torvalds | 17 December 2008, 23:01:06 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display USB: set correct configuration in probe of ti_usb_3410_5052 USB: add 5372:2303 to pl2303 USB: skip Set-Interface(0) if already in altsetting 0 USB: fix comment about endianness of descriptors USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour usbmon: drop bogus 0t from usbmon.txt USB: gadget: fix rndis working at high speed USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID USB: tty: SprogII DCC controller identifiers usb-storage: update unusual_devs entry for Nokia 5310 USB: Unusual devs patch for Nokia 3500c USB: storage: unusual_devs.h: Nokia 3109c addition USB: fix problem with usbtmc driver not loading properly | 17 December 2008, 23:01:06 UTC |
5b8bd54 | Linus Torvalds | 17 December 2008, 23:00:54 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: STAGING: Move staging drivers back to staging-specific menu driver core: add newlines to debugging enabled/disabled messages xilinx_hwicap: remove improper wording in license statement driver core: fix using 'ret' variable in unregister_dynamic_debug_module | 17 December 2008, 23:00:54 UTC |
331c313 | Jeff Layton | 17 December 2008, 11:31:53 UTC | cifs: fix buffer overrun in parse_DFS_referrals While testing a kernel with memory poisoning enabled, I saw some warnings about the redzone getting clobbered when chasing DFS referrals. The buffer allocation for the unicode converted version of the searchName is too small and needs to take null termination into account. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 December 2008, 22:59:55 UTC |
a52519f | Linus Torvalds | 17 December 2008, 22:58:56 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc: Fix corruption error in rh_alloc_fixed() powerpc/fsl-booke: Fix the miss interrupt restore | 17 December 2008, 22:58:56 UTC |
4b4cdf3 | Dmitry Baryshkov | 27 November 2008, 21:01:28 UTC | STAGING: Move staging drivers back to staging-specific menu Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 19:23:07 UTC |
aa6f3c6 | Marcel Holtmann | 30 November 2008, 13:01:26 UTC | driver core: add newlines to debugging enabled/disabled messages Both messages are missing the newline and thus dmesg output gets scrambled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 19:23:07 UTC |
09a35ce | Greg Kroah-Hartman | 07 December 2008, 05:10:51 UTC | xilinx_hwicap: remove improper wording in license statement GPLv2 doesn't allow additional restrictions to be imposed on any code, so this wording needs to be removed from these files. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 19:23:07 UTC |
1c93ca0 | Johann Felix Soden | 30 October 2008, 21:44:39 UTC | driver core: fix using 'ret' variable in unregister_dynamic_debug_module The 'ret' variable is assigned, but not used in the return statement. Fix this. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 19:23:06 UTC |
af4b851 | Mike Provencher | 16 December 2008, 20:30:14 UTC | USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:15 UTC |
413ba6f | Oliver Neukum | 16 December 2008, 11:25:55 UTC | USB: set correct configuration in probe of ti_usb_3410_5052 This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:15 UTC |
7c99200 | Matthew Arnold | 13 December 2008, 11:42:53 UTC | USB: add 5372:2303 to pl2303 This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:15 UTC |
24c0996 | Alan Stern | 01 December 2008, 15:24:41 UTC | USB: skip Set-Interface(0) if already in altsetting 0 When a driver unbinds from an interface, usbcore always sends a Set-Interface request to reinstall altsetting 0. Unforunately, quite a few devices have buggy firmware that crashes when it receives this request. To avoid such problems, this patch (as1180) arranges to send the Set-Interface request only when the interface is not already in altsetting 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:14 UTC |
9a9fafb | Phil Endecott | 01 December 2008, 15:22:33 UTC | USB: fix comment about endianness of descriptors This patch fixes a comment and clarifies the documentation about the endianness of descriptors. The current policy is that descriptors will be little-endian at the API even on big-endian systems; however the /proc/bus/usb API predates this policy and presents descriptors with some multibyte fields byte-swapped. Signed-off-by: Phil Endecott <usb_endian_patch@chezphil.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:14 UTC |
c33ba39 | Peter Korsgaard | 04 December 2008, 15:30:53 UTC | USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour Commit 7bb5ea54 (usb gadget serial: use composite gadget framework) changed the default for the use_acm parameter from 0 to 1. Update the documentation to match. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:13 UTC |
aacf4a0 | Pete Zaitcev | 04 December 2008, 23:17:00 UTC | usbmon: drop bogus 0t from usbmon.txt The example is incorrect: there is no 0t socket (the '1t' format has no bus number in it). Also, correct the broken sentence for USB Tag. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:12 UTC |
7c12414 | David Brownell | 25 November 2008, 07:11:03 UTC | USB: gadget: fix rndis working at high speed Fix a bug specific to highspeed mode in the recently updated RNDIS support: it wasn't setting up the high speed notification endpoint, which prevented high speed RNDIS links from working. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:12 UTC |
01ba085 | Andrew Ewert | 04 December 2008, 15:09:59 UTC | USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:11 UTC |
f2ee695 | Alan Cox | 07 December 2008, 07:46:04 UTC | USB: tty: SprogII DCC controller identifiers Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:11 UTC |
a4b1880 | Alan Stern | 01 December 2008, 15:23:43 UTC | usb-storage: update unusual_devs entry for Nokia 5310 This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Robson Roberto Souza Peixoto <robsonpeixoto@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:11 UTC |
48e1a54 | Ozan Sener | 08 December 2008, 17:15:45 UTC | USB: Unusual devs patch for Nokia 3500c T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener <themgzzy@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:11 UTC |
1393fce | CSÉCSY László | 09 December 2008, 22:39:14 UTC | USB: storage: unusual_devs.h: Nokia 3109c addition 2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László <boobaa@frugalware.org> Cc: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:10 UTC |
5413aa4 | Greg Kroah-Hartman | 04 December 2008, 00:33:09 UTC | USB: fix problem with usbtmc driver not loading properly The usbtmc driver forgot to export its device table to userspace. Without this, it is never loaded properly when such a device is seen by the system. Cc: Marcel Janssen <marcel.janssen@admesy.nl> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 17 December 2008, 18:49:10 UTC |
af4d364 | Guillaume Knispel | 09 December 2008, 14:28:34 UTC | powerpc: Fix corruption error in rh_alloc_fixed() There is an error in rh_alloc_fixed() of the Remote Heap code: If there is at least one free block blk won't be NULL at the end of the search loop, so -ENOMEM won't be returned and the else branch of "if (bs == s || be == e)" will be taken, corrupting the management structures. Signed-off-by: Guillaume Knispel <gknispel@proformatique.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | 17 December 2008, 16:06:14 UTC |
28707af | Dave Liu | 17 December 2008, 10:24:15 UTC | powerpc/fsl-booke: Fix the miss interrupt restore The commit e5e774d8833de1a0037be2384efccadf16935675 powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted introduce one issue. that casue the problem like this: Kernel BUG at c00b19fc [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC8572 DS Modules linked in: NIP: c00b19fc LR: c00b1c34 CTR: c0064e88 REGS: ef02b7b0 TRAP: 0700 Not tainted (2.6.28-rc8-00057-g1bda712) MSR: 00021000 <ME> CR: 44048028 XER: 20000000 TASK = ef02c000[1] 'init' THREAD: ef02a000 GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400 GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948 GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1 GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984 NIP [c00b19fc] __find_get_block+0x24/0x238 LR [c00b1c34] __getblk+0x24/0x2a0 Call Trace: [ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable) [ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0 [ef02b910] [c00b4ae4] __bread+0x14/0xf8 [ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138 [ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828 [ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808 [ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144 [ef02bb50] [c00fba38] ext2_readpages+0x24/0x34 [ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230 [ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0 [ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0 [ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4 [ef02bd10] [c000ed90] handle_page_fault+0xc/0x80 [ef02bdd0] [c00c7adc] set_brk+0x74/0x9c [ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180 [ef02be70] [c00945f0] search_binary_handler+0xa8/0x274 [ef02bea0] [c0095818] do_execve+0x19c/0x1d4 [ef02bed0] [c000766c] sys_execve+0x58/0x84 [ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c [ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c [ef02bfc0] [c0001e04] init_post+0xb0/0xf0 [ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4 [ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68 Instruction dump: 4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034 91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008 The issue was the beqlr returns early but we haven't reenabled interrupts. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | 17 December 2008, 16:06:13 UTC |
84df817 | Joerg Roedel | 17 December 2008, 15:36:44 UTC | AMD IOMMU: panic if completion wait loop fails Impact: prevents data corruption after a failed completion wait loop Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> | 17 December 2008, 15:36:44 UTC |
cf558d2 | Joerg Roedel | 17 December 2008, 14:06:01 UTC | AMD IOMMU: set cmd buffer pointers to zero manually Impact: set cmd buffer head and tail pointers to zero in case nobody else did Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> | 17 December 2008, 14:06:01 UTC |
a67534a | Jiri Slaby | 10 December 2008, 12:09:27 UTC | V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only Posting to linux-uvc-devel is restricted to members. You can subscribe to the list at ... MAINTAINERS | 2 +- Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 17 December 2008, 10:59:58 UTC |
c1892cb | Hans-Christian Egtvedt | 26 November 2008, 10:40:42 UTC | avr32: remove .note.gnu.build-id section when making vmlinux.bin This patch will remove the section .note.gnu.build-id added in binutils 2.18 from the vmlinux.bin binary. Not removing this section results in a huge multiple gigabyte binary and likewize large uImage. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 17 December 2008, 10:44:10 UTC |
2fccd28 | cwm97m | 16 December 2008, 20:28:44 UTC | jme: Fixed a typo Found a typo. Signed-off-by: Wei-Min Chen <cwm97m@cse.nsysu.edu.tw> Signed-off-by: David S. Miller <davem@davemloft.net> | 17 December 2008, 08:26:37 UTC |
e8e5752 | Krzysztof Halasa | 17 December 2008, 08:24:13 UTC | net: kernel BUG at drivers/net/phy/mdio_bus.c:165! kernel BUG at drivers/net/phy/mdio_bus.c:165! Unable to handle kernel NULL pointer dereference at virtual address 00000000 How? mdiobus_alloc() sets bus->state = MDIOBUS_ALLOCATED. mdiobus_register() sets bus->state = MDIOBUS_REGISTERED but then can fail (mdiobus_scan()) returning an error to the caller. The caller aborts correctly with mdiobus_free() which does: if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net> | 17 December 2008, 08:24:13 UTC |
878a553 | David S. Miller | 17 December 2008, 05:55:44 UTC | sparc: We need to implement arch_ptrace_stop(). In order to always provide fully synchronized state to the debugger, we might need to do a synchronize_user_stack(). A pair of hooks, arch_ptrace_stop_needed() and arch_ptrace_stop(), exist to handle this kind of situation. It was created for the sake of IA64. Use them, to flush the kernel side cached register windows to the user stack, when necessary. Signed-off-by: David S. Miller <davem@davemloft.net> | 17 December 2008, 05:55:44 UTC |
a977218 | Joel Becker | 17 December 2008, 02:10:18 UTC | ocfs2: Add JBD2 compat feature bit. Define the OCFS2_FEATURE_COMPAT_JBD2 bit in the filesystem header. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> | 17 December 2008, 02:26:16 UTC |
9a3de25 | Jarek Poplawski | 16 December 2008, 23:42:20 UTC | drivers/net: starfire: Fix napi ->poll() weight handling starfire napi ->poll() handler can return work == weight after calling netif_rx_complete() (if there is no more work). It is illegal and this patch fixes it. Reported-by: Alexander Huemer <alexander.huemer@sbg.ac.at> Tested-by: Alexander Huemer <alexander.huemer@sbg.ac.at> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 December 2008, 23:42:20 UTC |
bb5f133 | Sakari Ailus | 16 December 2008, 23:22:41 UTC | tlan: Fix pci memory unmapping Fix pci unmapping problem introduced by commit id 8953f1282793882a5444924f7a273dc72a43d0a3 "tlan: Fix small (< 64 bytes) datagram transmissions". Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 December 2008, 23:22:41 UTC |
83099bc | Tao Ma | 05 December 2008, 01:14:10 UTC | ocfs2: Always update xattr search when creating bucket. When we create xattr bucket during the process of xattr set, we always need to update the ocfs2_xattr_search since even if the bucket size is the same as block size, the offset will change because of the removal of the ocfs2_xattr_block header. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> | 16 December 2008, 22:07:37 UTC |