Skip to main content
https://github.com/torvalds/linux
18 March 2025, 07:35:20 UTC
sort by:
RevisionAuthorDateMessageCommit Date
8e49215 Linus Torvalds08 February 2009, 20:37:20 UTCLinux 2.6.29-rc408 February 2009, 20:37:27 UTC
58edf8e Linus Torvalds08 February 2009, 20:35:26 UTCMerge git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-update * git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-update: async: use list_move_tail async: Rename _special -> _domain for clarity. async: Add some documentation. async: Handle kthread_run() return codes. async: Fix running list handling.08 February 2009, 20:35:26 UTC
1fb25cb Benjamin Herrenschmidt05 February 2009, 01:06:52 UTCradeonfb: Fix resume from D3Cold on some platforms For historical reason, this driver used its own saving/restoring of the PCI config space, and used the state of it on resume as an indication as to whether it needed to re-POST the chip or not. This methods breaks with the later core changes since the core will have restored things for us. This patch fixes it by removing that custom code, using standard core methods to save/restore state, and testing for the need to re-POST by comparing the content of a few key PLL registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>08 February 2009, 18:48:57 UTC
b746bb7 Benjamin Herrenschmidt05 February 2009, 01:06:51 UTCaty128fb: Properly save PCI state before changing PCI PM level This fixes aty128fb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also replaced the hand-coded switch to D2 with a call to the genericc pci_set_power_state() and removed the code that switches it back to D0 since the generic code is doing that for us nowadays. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>08 February 2009, 18:48:56 UTC
b746816 Benjamin Herrenschmidt05 February 2009, 01:06:50 UTCatyfb: Properly save PCI state before changing PCI PM level This fixes atyfb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also slightly cleaned up the code that checks whether we are running on a PowerMac to do a runtime check instead of a compile check only, and replaced a deprecated number with the proper symbolic constant. Finally, I removed the useless switch to D0 from resume since the core does it for us. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>08 February 2009, 18:48:56 UTC
f7de762 Stefan Richter02 February 2009, 12:24:34 UTCasync: use list_move_tail list.h provides a dedicated primitive for "list_del followed by list_add_tail"... list_move_tail. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>08 February 2009, 18:00:26 UTC
766ccb9 Cornelia Huck20 January 2009, 14:31:31 UTCasync: Rename _special -> _domain for clarity. Rename the async_*_special() functions to async_*_domain(), which describes the purpose of these functions much better. [Broke up long lines to silence checkpatch] Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>08 February 2009, 17:56:11 UTC
f30d5b3 Cornelia Huck19 January 2009, 12:45:33 UTCasync: Add some documentation. Add some kerneldoc to the async interface. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>08 February 2009, 17:56:11 UTC
86532d8 Cornelia Huck19 January 2009, 12:45:31 UTCasync: Handle kthread_run() return codes. If we fail to create the manager thread, fall back to non-fastboot. If we fail to create an async thread, try again after waiting for a bit. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>08 February 2009, 17:56:10 UTC
7a89bbc Cornelia Huck19 January 2009, 12:45:28 UTCasync: Fix running list handling. async_schedule() should pass in async_running as the running list, and run_one_entry() should put the entry to be run on the provided running list instead of always on the generic one. Reported-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>08 February 2009, 17:56:10 UTC
e83102c Linus Torvalds07 February 2009, 18:46:30 UTCMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI PM: make the PM core more careful with drivers using the new PM framework PCI PM: Read power state from device after trying to change it on resume PCI PM: Do not disable and enable bridges during suspend-resume PCI: PCIe portdrv: Simplify suspend and resume PCI PM: Fix saving of device state in pci_legacy_suspend PCI PM: Check if the state has been saved before trying to restore it PCI PM: Fix handling of devices without drivers PCI: return error on failure to read PCI ROMs PCI: properly clean up ASPM link state on device remove07 February 2009, 18:46:30 UTC
7f9a50a Rusty Russell07 February 2009, 07:45:56 UTCmodule: remove over-zealous check in __module_get() Impact: fix spurious BUG_ON() triggered under load module_refcount() isn't reliable outside stop_machine(), as demonstrated by Karsten Keil <kkeil@suse.de>, networking can trigger it under load (an inc on one cpu and dec on another while module_refcount() is tallying can give false results, for example). Almost noone should be using __module_get, but that's another issue. Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>07 February 2009, 16:33:01 UTC
f12b12a Linus Torvalds07 February 2009, 16:30:20 UTCMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (30 commits) ACPI: Kconfig text - Fix the ACPI_CONTAINER module name according to the real module name. eeepc-laptop: fix oops when changing backlight brightness during eeepc-laptop init ACPICA: Fix table entry truncation calculation ACPI: Enable bit 11 in _PDC to advertise hw coord ACPI: struct device - replace bus_id with dev_name(), dev_set_name() ACPI: add missing KERN_* constants to printks ACPI: dock: Don't eval _STA on every show_docked sysfs read ACPI: disable ACPI cleanly when bad RSDP found ACPI: delete CPU_IDLE=n code ACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries ACPI: make some IO ports off-limits to AML ACPICA: add debug dump of BIOS _OSI strings ACPI: proc_dir_entry 'video/VGA' already registered ACPI: Skip the first two elements in the _BCL package ACPI: remove BM_RLD access from idle entry path ACPI: remove locking from PM1x_STS register reads eeepc-laptop: use netlink interface eeepc-laptop: Implement rfkill hotplugging in eeepc-laptop eeepc-laptop: Check return values from rfkill_register eeepc-laptop: Add support for extended hotkeys ...07 February 2009, 16:30:20 UTC
2d29c6a Len Brown07 February 2009, 06:34:56 UTCMerge branches 'release', 'asus', 'bugzilla-12450', 'cpuidle', 'debug', 'ec', 'misc', 'printk' and 'processor' into release07 February 2009, 06:34:56 UTC
370154b Thierry Vignaud07 February 2009, 06:12:19 UTCACPI: Kconfig text - Fix the ACPI_CONTAINER module name according to the real module name. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>07 February 2009, 06:12:19 UTC
7695fb0 Darren Salt07 February 2009, 06:02:07 UTCeeepc-laptop: fix oops when changing backlight brightness during eeepc-laptop init I got the following oops while changing the backlight brightness during startup. When it happens, it prevents use of the hotkeys, Fn-Fx, and the lid button. It's a clear use-before-init, as I verified by testing with an appropriately-placed "else printk". BUG: unable to handle kernel NULL pointer dereference at 00000000 *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP Pid: 160, comm: kacpi_notify Not tainted (2.6.28.1-eee901 #4) 901 EIP: 0060:[<c0264e68>] [<c0264e68>] eeepc_hotk_notify+26/da EFLAGS: 00010246 CPU: 1 Using defaults from ksymoops -t elf32-i386 -a i386 EAX: 00000009 EBX: 00000000 ECX: 00000009 EDX: f70dbf64 ESI: 00000029 EDI: f7335188 EBP: c02112c9 ESP: f70dbf80 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 f70731e0 f73acd50 c02164ac f7335180 f70aa040 c02112e6 f733518c c012b62f f70aa044 f70aa040 c012bdba f70aa04c 00000000 c012be6e 00000000 f70bdf80 c012e198 f70dbfc4 f70dbfc4 f70aa040 c012bdba 00000000 c012e0c9 c012e091 Call Trace: [<c02164ac>] ? acpi_ev_notify_dispatch+4c/55 [<c02112e6>] ? acpi_os_execute_deferred+1d/25 [<c012b62f>] ? run_workqueue+71/f1 [<c012bdba>] ? worker_thread+0/bf [<c012be6e>] ? worker_thread+b4/bf [<c012e198>] ? autoremove_wake_function+0/2b [<c012bdba>] ? worker_thread+0/bf [<c012e0c9>] ? kthread+38/5f [<c012e091>] ? kthread+0/5f [<c0103abf>] ? kernel_thread_helper+7/10 Code: 00 00 00 00 c3 83 3d 60 5c 50 c0 00 56 89 d6 53 0f 84 c4 00 00 00 8d 42 e0 83 f8 0f 77 0f 8b 1d 68 5c 50 c0 89 d8 e8 a9 fa ff ff <89> 03 8b 1d 60 5c 50 c0 89 f2 83 e2 7f 0f b7 4c 53 10 8d 41 01 Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>07 February 2009, 06:02:07 UTC
386e4a8 Myron Stowe30 January 2009, 22:44:53 UTCACPICA: Fix table entry truncation calculation During early boot, ACPI RSDT/XSDT table entries are gathered into the 'initial_tables[]' array. This array is currently statically defined (see ./drivers/acpi/tables.c). When there are more table entries than can be held in the 'initial_tables[]' array, the message "Truncating N table entries!" is output. As currently implemented, this message will always erroneously calculate N as 0. This patch fixes the calculation that determines how many table entries will be missing (truncated). This modification may be used under either the GPL or the BSD-style license used for Intel ACPI CA code. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>07 February 2009, 05:51:23 UTC
d96f94c Pallipadi, Venkatesh02 February 2009, 19:57:18 UTCACPI: Enable bit 11 in _PDC to advertise hw coord Bit 11 in intel PDC definitions is meant for OS capability to handle hardware coordination of P-states. In Linux we have always supported hwardware coordination of P-states. Just let the BIOSes know that we support it, by setting this bit. Some BIOSes use this bit to choose between hardware or software coordination and without this change below, BIOSes switch to software coordination, which is not very optimal in terms of power consumption and extra wakeups from idle. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>07 February 2009, 05:41:14 UTC
db1461a Kay Sievers25 January 2009, 22:40:56 UTCACPI: struct device - replace bus_id with dev_name(), dev_set_name() Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>07 February 2009, 05:41:13 UTC
4d93915 Frank Seidel04 February 2009, 16:03:07 UTCACPI: add missing KERN_* constants to printks According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing peaces here for the acpi subsystem. Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Len Brown <len.brown@intel.com>07 February 2009, 05:29:32 UTC
fc5a9f8 Holger Macht20 January 2009, 11:18:24 UTCACPI: dock: Don't eval _STA on every show_docked sysfs read Some devices trigger a DEVICE_CHECK on every evalutation of _STA. This can also be seen in commit 8b59560a3baf2e7c24e0fb92ea5d09eca92805db (ACPI: dock: avoid check _STA method). If an undock is processed, the dock driver sends a uevent and userspace might read the show_docked property in sysfs. This causes an evaluation of _STA of the particular device which causes the dock driver to immediately dock again. In any case, evaluation of _STA (show_docked) does not necessarily mean that we are docked, so check with the internal device structure. http://bugzilla.kernel.org/show_bug.cgi?id=12360 Signed-off-by: Holger Macht <hmacht@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>07 February 2009, 03:08:15 UTC
ccfef64 Linus Torvalds07 February 2009, 02:52:55 UTCMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: CRED: Fix SUID exec regression07 February 2009, 02:52:55 UTC
ae1a25d Linus Torvalds07 February 2009, 02:37:22 UTCMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (37 commits) Btrfs: Make sure dir is non-null before doing S_ISGID checks Btrfs: Fix memory leak in cache_drop_leaf_ref Btrfs: don't return congestion in write_cache_pages as often Btrfs: Only prep for btree deletion balances when nodes are mostly empty Btrfs: fix btrfs_unlock_up_safe to walk the entire path Btrfs: change btrfs_del_leaf to drop locks earlier Btrfs: Change btrfs_truncate_inode_items to stop when it hits the inode Btrfs: Don't try to compress pages past i_size Btrfs: join the transaction in __btrfs_setxattr Btrfs: Handle SGID bit when creating inodes Btrfs: Make btrfs_drop_snapshot work in larger and more efficient chunks Btrfs: Change btree locking to use explicit blocking points Btrfs: hash_lock is no longer needed Btrfs: disable leak debugging checks in extent_io.c Btrfs: sort references by byte number during btrfs_inc_ref Btrfs: async threads should try harder to find work Btrfs: selinux support Btrfs: make btrfs acls selectable Btrfs: Catch missed bios in the async bio submission thread Btrfs: fix readdir on 32 bit machines ...07 February 2009, 02:37:22 UTC
fd9fc84 Tyler Hicks07 February 2009, 00:06:51 UTCeCryptfs: Regression in unencrypted filename symlinks The addition of filename encryption caused a regression in unencrypted filename symlink support. ecryptfs_copy_filename() is used when dealing with unencrypted filenames and it reported that the new, copied filename was a character longer than it should have been. This caused the return value of readlink() to count the NULL byte of the symlink target. Most applications don't care about the extra NULL byte, but a version control system (bzr) helped in discovering the bug. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>07 February 2009, 02:36:40 UTC
eeb9485 Linus Torvalds07 February 2009, 02:36:02 UTCMerge branch 'x86/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86-64: fix int $0x80 -ENOSYS return07 February 2009, 02:36:02 UTC
c09249f Roland McGrath07 February 2009, 02:15:18 UTCx86-64: fix int $0x80 -ENOSYS return One of my past fixes to this code introduced a different new bug. When using 32-bit "int $0x80" entry for a bogus syscall number, the return value is not correctly set to -ENOSYS. This only happens when neither syscall-audit nor syscall tracing is enabled (i.e., never seen if auditd ever started). Test program: /* gcc -o int80-badsys -m32 -g int80-badsys.c Run on x86-64 kernel. Note to reproduce the bug you need auditd never to have started. */ #include <errno.h> #include <stdio.h> int main (void) { long res; asm ("int $0x80" : "=a" (res) : "0" (99999)); printf ("bad syscall returns %ld\n", res); return res != -ENOSYS; } The fix makes the int $0x80 path match the sysenter and syscall paths. Reported-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Roland McGrath <roland@redhat.com>07 February 2009, 02:22:29 UTC
1d87b0d Linus Torvalds07 February 2009, 02:10:04 UTCMerge branch 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: elf core dump: fix get_user use07 February 2009, 02:10:04 UTC
92dc07b Roland McGrath07 February 2009, 01:34:07 UTCelf core dump: fix get_user use The elf_core_dump() code does its work with set_fs(KERNEL_DS) in force, so vma_dump_size() needs to switch back with set_fs(USER_DS) to safely use get_user() for a normal user-space address. Checking for VM_READ optimizes out the case where get_user() would fail anyway. The vm_file check here was already superfluous given the control flow earlier in the function, so that is a cleanup/optimization unrelated to other changes but an obvious and trivial one. Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Roland McGrath <roland@redhat.com>07 February 2009, 01:34:07 UTC
0bf2f3a David Howells06 February 2009, 11:45:46 UTCCRED: Fix SUID exec regression The patch: commit a6f76f23d297f70e2a6b3ec607f7aeeea9e37e8d CRED: Make execve() take advantage of copy-on-write credentials moved the place in which the 'safeness' of a SUID/SGID exec was performed to before de_thread() was called. This means that LSM_UNSAFE_SHARE is now calculated incorrectly. This flag is set if any of the usage counts for fs_struct, files_struct and sighand_struct are greater than 1 at the time the determination is made. All of which are true for threads created by the pthread library. However, since we wish to make the security calculation before irrevocably damaging the process so that we can return it an error code in the case where we decide we want to reject the exec request on this basis, we have to make the determination before calling de_thread(). So, instead, we count up the number of threads (CLONE_THREAD) that are sharing our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs (CLONE_SIGHAND/CLONE_THREAD) with us. These will be killed by de_thread() and so can be discounted by check_unsafe_exec(). We do have to be careful because CLONE_THREAD does not imply FS or FILES. We _assume_ that there will be no extra references to these structs held by the threads we're going to kill. This can be tested with the attached pair of programs. Build the two programs using the Makefile supplied, and run ./test1 as a non-root user. If successful, you should see something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=0 suid=0 SUCCESS - Correct effective user ID and if unsuccessful, something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=4043 suid=4043 ERROR - Incorrect effective user ID! The non-root user ID you see will depend on the user you run as. [test1.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <pthread.h> static void *thread_func(void *arg) { while (1) {} } int main(int argc, char **argv) { pthread_t tid; uid_t uid, euid, suid; printf("--TEST1--\n"); getresuid(&uid, &euid, &suid); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (pthread_create(&tid, NULL, thread_func, NULL) < 0) { perror("pthread_create"); exit(1); } printf("exec ./test2\n"); execlp("./test2", "test2", NULL); perror("./test2"); _exit(1); } [test2.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char **argv) { uid_t uid, euid, suid; getresuid(&uid, &euid, &suid); printf("--TEST2--\n"); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (euid != 0) { fprintf(stderr, "ERROR - Incorrect effective user ID!\n"); exit(1); } printf("SUCCESS - Correct effective user ID\n"); exit(0); } [Makefile] CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused all: test1 test2 test1: test1.c gcc $(CFLAGS) -o test1 test1.c -lpthread test2: test2.c gcc $(CFLAGS) -o test2 test2.c sudo chown root.root test2 sudo chmod +s test2 Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David Smith <dsmith@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>06 February 2009, 21:46:18 UTC
d4cf109 Dave Kleikamp06 February 2009, 20:59:26 UTCvfs: Don't call attach_nobh_buffers() with an empty list This is a modification of a patch by Bill Pemberton <wfp5p@virginia.edu> nobh_write_end() could call attach_nobh_buffers() with head == NULL. This would result in a trap when attach_nobh_buffers() attempted to access bh->b_this_page. This can be illustrated by running the writev01 testcase from LTP on jfs. This error was introduced by commit 5b41e74a "vfs: fix data leak in nobh_write_end()". That patch did not take into account that if PageMappedToDisk() is true upon entry to nobh_write_begin(), then no buffers will be allocated for the page. In that case, we won't have to worry about a failed write leaving unitialized data in the page. Of course, head != NULL implies !page_has_buffers(page), so no need to test both. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dmitri Monakhov <dmonakhov@openvz.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>06 February 2009, 21:34:22 UTC
6cec508 Linus Torvalds06 February 2009, 19:14:23 UTCMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add missing COEF initialization for ALC887 ALSA: hda - Add missing initialization for ALC272 sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devices ALSA: hda - Fix misc workqueue issues ALSA: hda - Add quirk for FSC Amilo Xi255006 February 2009, 19:14:23 UTC
9e3a9d1 Len Brown06 February 2009, 19:00:56 UTCACPI: disable ACPI cleanly when bad RSDP found When ACPI is disabled in the BIOS of this VIA C3 box, it invalidates the RSDP, which Linux notices: ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080926] Bug Linux neglected to disable ACPI at that stage, and later scribbled on smp_found_config: ACPI: No APIC-table, disabling MPS But this box doesn't run well in legacy PIC mode, it needed IOAPIC mode to perform correctly: http://lkml.org/lkml/2009/2/5/39 So exit ACPI mode cleanly when we first detect that it is hopeless. Signed-off-by: Len Brown <len.brown@intel.com>06 February 2009, 19:00:56 UTC
9fdd54f Len Brown06 February 2009, 17:24:17 UTCACPI: delete CPU_IDLE=n code CPU_IDLE=y has been default for ACPI=y since Nov-2007, and has shipped in many distributions since then. Here we delete the CPU_IDLE=n ACPI idle code, since nobody should be using it, and we don't want to maintain two versions. Signed-off-by: Len Brown <len.brown@intel.com>06 February 2009, 17:34:39 UTC
5e3bd4e Linus Torvalds06 February 2009, 16:48:16 UTCMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: dv1394: move deprecation message from module init to file open firewire: core: Remove card from list of cards when enable fails06 February 2009, 16:48:16 UTC
bcee402 Uwe Kleine-König06 February 2009, 13:53:18 UTCAdd Sascha Hauer to .mailmap This fixes the shortlog attribution e.g. for 106757b38fff Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>06 February 2009, 16:47:25 UTC
6d7f2ca Uwe Kleine-König06 February 2009, 13:53:19 UTCadd another mailmap entry for Uwe Kleine-König I created commit 7971db5a4b4176ad5df590fce07a962c643a2740 on a machine where I forgot to set user.name and user.email before. The default values were not optimal. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>06 February 2009, 16:47:25 UTC
04ec93f Li Zefan06 February 2009, 08:17:19 UTCfork.c: fix NULL pointer dereference when nr_threads == threads-max I happened to forked lots of processes, and hit NULL pointer dereference. It is because in copy_process() after checking max_threads, 0 is returned but not -EAGAIN. The bug is introduced by "CRED: Detach the credentials from task_struct" (commit f1752eec6145c97163dbce62d17cf5d928e28a27). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>06 February 2009, 16:43:11 UTC
42f15d7 Chris Mason06 February 2009, 16:35:57 UTCBtrfs: Make sure dir is non-null before doing S_ISGID checks The S_ISGID check in btrfs_new_inode caused an oops during subvol creation because sometimes the dir is null. Signed-off-by: Chris Mason <chris.mason@oracle.com>06 February 2009, 16:35:57 UTC
b2a740a Linus Torvalds06 February 2009, 15:41:10 UTCMerge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md: Ensure an md array never has too many devices. md: Fix a bug in linear.c causing which_dev() to return the wrong device. md: Allow read error in a single drive raid1 to be passed up.06 February 2009, 15:41:10 UTC
8643153 Stefan Richter03 February 2009, 16:54:31 UTCieee1394: dv1394: move deprecation message from module init to file open On many Linux installations, the dv1394 driver will be auto-loaded whenever an AV/C device (e.g. camcorder or audio device) is plugged in. An irritating message would then appear in the kernel log. Defer this message to until a dv1394 character device file is actually used by a program. Also include the program name in the message and update the message slightly. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>06 February 2009, 14:52:28 UTC
b0050ca Takashi Iwai06 February 2009, 13:25:13 UTCMerge branch 'fix/usb-audio' into for-linus06 February 2009, 13:25:13 UTC
b2573eb Takashi Iwai06 February 2009, 13:25:04 UTCMerge branch 'fix/hda' into for-linus06 February 2009, 13:25:04 UTC
4a5a4c5 Takashi Iwai06 February 2009, 11:46:59 UTCALSA: hda - Add missing COEF initialization for ALC887 Signed-off-by: Takashi Iwai <tiwai@suse.de>06 February 2009, 11:46:59 UTC
c6e8f2d Takashi Iwai06 February 2009, 11:45:52 UTCALSA: hda - Add missing initialization for ALC272 ALC272 needs EAPD for speaker outputs as well as other similar ALC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>06 February 2009, 11:45:52 UTC
894dcd7 Clemens Ladisch06 February 2009, 07:13:07 UTCsound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devices For audio devices that do not have proper audio descriptors (e.g., Edirol UA-20), we use hardcoded parameters from our quirks list. However, we must still read the maximum packet size from the standard endpoint descriptor; otherwise, we might use packets that are too big and therefore rejected by the USB core. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>06 February 2009, 08:47:12 UTC
de01dfa NeilBrown06 February 2009, 07:02:46 UTCmd: Ensure an md array never has too many devices. Each different metadata format supported by md supports a different maximum number of devices. We really should be enforcing this maximum in the kernel, but we aren't quite doing that properly. We currently only enforce it at the 'hot_add' point, which is an older interface which is not used by current userspace. We need to also enforce it at 'add_new_disk' time for active arrays and at 'do_md_run' time when starting a new array. So move the test from 'hot_add' into 'bind_rdev_to_array' which is called from both 'hot_add' and 'add_new_disk, and add a new test in 'analyse_sbs' which is called from 'do_md_run'. This bug (or missing feature) has been around "forever" and so the patch is suitable for any -stable that is currently maintained. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>06 February 2009, 07:02:46 UTC
852c8bf Andre Noll06 February 2009, 04:10:52 UTCmd: Fix a bug in linear.c causing which_dev() to return the wrong device. ab5bd5cbc8d4b868378d062eed3d4240930fbb86 introduced the following bug in linear software raid for large arrays on 32 bit machines: which_dev() computes the device holding a given sector by shifting down the sector number to a 32 bit range, dividing by the array spacing and looking up the resulting index in the hash table of the array. Because the computed index might be slightly too small, a loop at the end of which_dev() increases the index until the given sector actually falls into the range of the device associated with that index. The changes of the above mentioned commit caused this loop to check whether the _index_ rather than the sector number is small enough, effectively bypassing the loop and thus possibly returning the wrong device. As reported by Simon Kirby, this leads to errors such as linear_make_request: Sector 2340486136 out of bounds on dev sdi: 156301312 sectors, offset 2109870464 Fix this bug by introducing a local variable for the index so that the variable containing the passed sector is left unchanged. Cc: stable@kernel.org Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>06 February 2009, 04:10:52 UTC
4706b34 NeilBrown06 February 2009, 04:06:47 UTCmd: Allow read error in a single drive raid1 to be passed up. If a raid1 only has a single working device and gets a read error, we choose to simply return that error up to the filesystem (or whatever) rather than failing the whole array. However the codes doesn't quite do that. We attempt a readbalance which allocates the same drive, so we retry the read - indefinitely. Instead: If read_balance in the error case chooses the same drive that just failed, treat it as a failure and don't retry. Signed-off-by: NeilBrown <neilb@suse.de>06 February 2009, 04:06:47 UTC
9be260a Masami Hiramatsu05 February 2009, 22:12:39 UTCprevent kprobes from catching spurious page faults Prevent kprobes from catching spurious faults which will cause infinite recursive page-fault and memory corruption by stack overflow. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>06 February 2009, 01:01:50 UTC
767b582 Al Viro06 February 2009, 00:32:27 UTCbraino in sg_ioctl_trans() ... and yes, gcc is insane enough to eat that without complaint. We probably want sparse to scream on those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>06 February 2009, 00:35:52 UTC
0822563 Linus Torvalds06 February 2009, 00:12:38 UTCMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: Revert "configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()"06 February 2009, 00:12:38 UTC
09cd5b8 Linus Torvalds06 February 2009, 00:11:54 UTCMerge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix up T-bit error handling in SH-4A mutex fastpath. sh: Fix up spurious syscall restarting. sh: fcnvds fix with denormalized numbers on SH-4 FPU. sh: Only reserve memory under CONFIG_ZERO_PAGE_OFFSET when it != 0. sh: Handle calling csum_partial with misaligned data sh: ap325rxa: Enable ov772x in defconfig. sh: ap325rxa: Add ov772x support. sh: ap325rxa: control camera power toggling. sh: mach-migor: Enable ov772x and tw9910 in defconfig.06 February 2009, 00:11:54 UTC
cc5724c Linus Torvalds06 February 2009, 00:11:32 UTCMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: Revert "tcp: Always set urgent pointer if it's beyond snd_nxt" ipv6: Copy cork options in ip6_append_data udp: Fix UDP short packet false positive gianfar: Fix potential soft reset race gianfar: Fix BD_LENGTH_MASK definition cxgb3: Fix lro switch iwlwifi: save PCI state before suspend, restore after resume iwlwifi: clean key table in iwl_clear_stations_table06 February 2009, 00:11:32 UTC
a23f4bb David S. Miller05 February 2009, 23:38:31 UTCRevert "tcp: Always set urgent pointer if it's beyond snd_nxt" This reverts commit 64ff3b938ec6782e6585a83d5459b98b0c3f6eb8. Jeff Chua reports that it breaks rlogin for him. Signed-off-by: David S. Miller <davem@davemloft.net>05 February 2009, 23:38:31 UTC
0178b69 Herbert Xu05 February 2009, 23:15:50 UTCipv6: Copy cork options in ip6_append_data As the options passed to ip6_append_data may be ephemeral, we need to duplicate it for corking. This patch applies the simplest fix which is to memdup all the relevant bits. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>05 February 2009, 23:15:50 UTC
12402b5 David S. Miller05 February 2009, 23:08:11 UTCMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.605 February 2009, 23:08:11 UTC
7b5e56f Jesper Dangaard Brouer05 February 2009, 23:05:45 UTCudp: Fix UDP short packet false positive The UDP header pointer assignment must happen after calling pskb_may_pull(). As pskb_may_pull() can potentially alter the SKB buffer. This was exposted by running multicast traffic through the NIU driver, as it won't prepull the protocol headers into the linear area on receive. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>05 February 2009, 23:05:45 UTC
f01d1d5 Alexey Dobriyan05 February 2009, 21:30:05 UTCseq_file: fix big-enough lseek() + read() lseek() further than length of the file will leave stale ->index (second-to-last during iteration). Next seq_read() will not notice that ->f_pos is big enough to return 0, but will print last item as if ->f_pos is pointing to it. Introduced in commit cb510b8172602a66467f3551b4be1911f5a7c8c2 aka "seq_file: more atomicity in traverse()". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 22:18:14 UTC
33da889 Eric Biederman04 February 2009, 23:12:25 UTCseq_file: move traverse so it can be used from seq_read In 2.6.25 some /proc files were converted to use the seq_file infrastructure. But seq_files do not correctly support pread(), which broke some usersapce applications. To handle pread correctly we can't assume that f_pos is where we left it in seq_read. So move traverse() so that we can eventually use it in seq_read and do thus some day support pread(). Signed-off-by: Eric Biederman <ebiederm@xmission.com> Cc: Paul Turner <pjt@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:49 UTC
361916a Dean Nelson04 February 2009, 23:12:24 UTCsgi-xp: fix writing past the end of kzalloc()'d space A missing type cast results in writing way beyond the end of a kzalloc()'d memory segment resulting in slab corruption. But it seems like the better solution is to define ->recv_msg_slots as a 'void *' rather than a 'struct xpc_notify_mq_msg_uv *' and add the type cast. Signed-off-by: Dean Nelson <dcn@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:49 UTC
fb9a680 Alexey Dobriyan04 February 2009, 23:12:21 UTCalpha: fixup BUG macro Do usual do {} while (0) dance, otherwise fs/gfs2/util.c:99: error: expected expression before 'else' drivers/scsi/lpfc/lpfc_sli.c:363: error: expected expression before 'else' Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:49 UTC
736d545 Dan Carpenter04 February 2009, 23:12:20 UTCsx.c: fix missed unlock_kernel() on error path in sx_fw_ioctl() If we return directly with -EPERM then lock_kernel() is still held. This was found with a code checker (http://repo.or.cz/w/smatch.git/). [akpm@linux-foundation.org: fix another such path - missed func_exit()] Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: <R.E.Wolff@BitWizard.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:48 UTC
fe86175 Randy Dunlap04 February 2009, 23:12:20 UTCatyfb: fix CONFIG_ namespace violations Fix namespace violations by changing non-kconfig CONFIG_ names to CNFG_*. Fixes breakage in staging/, which adds a real CONFIG_PANEL. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:48 UTC
cd29cf7 Manish Katiyar04 February 2009, 23:12:19 UTCrtc-ds1390: fix compilation warnings in drivers/rtc/rtc-ds1390.c drivers/rtc/rtc-ds1390.c:125: warning: unused variable 'rtc' Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:48 UTC
ce43ae5 Mike Rapoport04 February 2009, 23:12:18 UTCdrivers/video/backlight: rename da903x to da903x_bl Currently both da903x backlight and voltage reulator drivers have the same name. Rename the backlight driver to allow use of both drivers as modules. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:48 UTC
dfecb71 Hans-Christian Egtvedt04 February 2009, 23:12:17 UTCatmel-ssc: fix misuse of dev_dbg when requested ssc instance is not found The ssc pointer is not valid when the id is not found in the list. Convert the message from a debug one into an error message and avoid dereferencing the bad pointer. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:48 UTC
ab92661 Carsten Otte04 February 2009, 23:12:16 UTCdo_wp_page: fix regression with execute in place Fix do_wp_page for VM_MIXEDMAP mappings. In the case where pfn_valid returns 0 for a pfn at the beginning of do_wp_page and the mapping is not shared writable, the code branches to label `gotten:' with old_page == NULL. In case the vma is locked (vma->vm_flags & VM_LOCKED), lock_page, clear_page_mlock, and unlock_page try to access the old_page. This patch checks whether old_page is valid before it is dereferenced. The regression was introduced by "mlock: mlocked pages are unevictable" (commit b291f000393f5a0b679012b39d79fbc85c018233). Signed-off-by: Carsten Otte <cotte@de.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:48 UTC
777c6c5 Johannes Weiner04 February 2009, 23:12:14 UTCwait: prevent exclusive waiter starvation With exclusive waiters, every process woken up through the wait queue must ensure that the next waiter down the line is woken when it has finished. Interruptible waiters don't do that when aborting due to a signal. And if an aborting waiter is concurrently woken up through the waitqueue, noone will ever wake up the next waiter. This has been observed with __wait_on_bit_lock() used by lock_page_killable(): the first contender on the queue was aborting when the actual lock holder woke it up concurrently. The aborted contender didn't acquire the lock and therefor never did an unlock followed by waking up the next waiter. Add abort_exclusive_wait() which removes the process' wait descriptor from the waitqueue, iff still queued, or wakes up the next waiter otherwise. It does so under the waitqueue lock. Racing with a wake up means the aborting process is either already woken (removed from the queue) and will wake up the next waiter, or it will remove itself from the queue and the concurrent wake up will apply to the next waiter after it. Use abort_exclusive_wait() in __wait_event_interruptible_exclusive() and __wait_on_bit_lock() when they were interrupted by other means than a wake up through the queue. [akpm@linux-foundation.org: coding-style fixes] Reported-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Mentored-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chuck Lever <cel@citi.umich.edu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> ["after some testing"] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:48 UTC
40b0bb1 Randy Dunlap04 February 2009, 23:12:13 UTCmaintainers: general@lists.openfabrics.org is moderated I got the "list is moderated message," so add it here. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
87357d2 Martin Kebert04 February 2009, 23:12:12 UTClis3lv02d: add axes knowledge for HP 6710 Add support for the HP laptops of model 6710x for having correctly setup axes. Signed-off-by: Martin Kebert <gkmarty@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
c77a022 Pavel Herrmann04 February 2009, 23:12:11 UTClis3lv02d: add axes knowledge for HP 6730 Add support for the HP laptops of model 6730x for having correctly setup axes. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
80eda5f Eric Piel04 February 2009, 23:12:11 UTClis3lv02d: add axes knowledge for HP 6530 Add support for the HP laptops of model 6530x for having correctly setup axes. Reported-by: Jerome Poulin <jeromepoulin@gmail.com> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
6bfef2b Jiri Tersel04 February 2009, 23:12:09 UTClis3lv02d: add axes knowledge for HP 6510b According to dmesg my laptop model HP 6510b is not being recognized by this driver. After I have modified "lis3lv02d.c" axes in Neverball are OK. Signed-off-by: Jiri Tersel <tersel@mail.muni.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
44f0606 Andrew Morton04 February 2009, 23:12:07 UTChp-wmi: fix error path in hp_wmi_bios_setup() The error-path code can call rfkill_unregister() with a pointer which does not contain the result of a call to rfkill_register(). It goes BUG(). Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12560. Cc: Frans Pop <elendil@planet.nl> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Len Brown <lenb@kernel.org> Acked-by: Matthew Garrett <mjg@redhat.com> Reported-by: Helge Deller <deller@gmx.de> Testted-by: Helge Deller <deller@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
60fd760 Andrew Morton04 February 2009, 23:12:06 UTCrevert "rlimit: permit setting RLIMIT_NOFILE to RLIM_INFINITY" Revert commit 0c2d64fb6cae9aae480f6a46cfe79f8d7d48b59f because it causes (arguably poorly designed) existing userspace to spend interminable periods closing billions of not-open file descriptors. We could bring this back, with some sort of opt-in tunable in /proc, which defaults to "off". Peter's alanysis follows: : I spent several hours trying to get to the bottom of a serious : performance issue that appeared on one of our servers after upgrading to : 2.6.28. In the end it's what could be considered a userspace bug that : was triggered by a change in 2.6.28. Since this might also affect other : people I figured I'd at least document what I found here, and maybe we : can even do something about it: : : : So, I upgraded some of debian.org's machines to 2.6.28.1 and immediately : the team maintaining our ftp archive complained that one of their : scripts that previously ran in a few minutes still hadn't even come : close to being done after an hour or so. Downgrading to 2.6.27 fixed : that. : : Turns out that script is forking a lot and something in it or python or : whereever closes all the file descriptors it doesn't want to pass on. : That is, it starts at zero and goes up to ulimit -n/RLIMIT_NOFILE and : closes them all with a few exceptions. : : Turns out that takes a long time when your limit -n is now 2^20 (1048576). : : With 2.6.27.* the ulimit -n was the standard 1024, but with 2.6.28 it is : now a thousand times that. : : 2.6.28 included a patch titled "rlimit: permit setting RLIMIT_NOFILE to : RLIM_INFINITY" (0c2d64fb6cae9aae480f6a46cfe79f8d7d48b59f)[1] that : allows, as the title implies, to set the limit for number of files to : infinity. : : Closer investigation showed that the broken default ulimit did not apply : to "system" processes (like stuff started from init). In the end I : could establish that all processes that passed through pam_limit at one : point had the bad resource limit. : : Apparently the pam library in Debian etch (4.0) initializes the limits : to some default values when it doesn't have any settings in limit.conf : to override them. Turns out that for nofiles this is RLIM_INFINITY. : Commenting out "case RLIMIT_NOFILE" in pam_limit.c:267 of our pam : package version 0.79-5 fixes that - tho I'm not sure what side effects : that has. : : Debian lenny (the upcoming 5.0 version) doesn't have this issue as it : uses a different pam (version). Reported-by: Peter Palfrader <weasel@debian.org> Cc: Adam Tkac <vonsch@gmail.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
a68e61e Tony Battersby04 February 2009, 23:12:04 UTCshm: fix shmctl(SHM_INFO) lockup with !CONFIG_SHMEM shm_get_stat() assumes that the inode is a "struct shmem_inode_info", which is incorrect for !CONFIG_SHMEM (see fs/ramfs/inode.c: ramfs_get_inode() vs. mm/shmem.c: shmem_get_inode()). This bad assumption can cause shmctl(SHM_INFO) to lockup when shm_get_stat() tries to spin_lock(&info->lock). Users of !CONFIG_SHMEM may encounter this lockup simply by invoking the 'ipcs' command. Reported by Jiri Olsa back in February 2008: http://lkml.org/lkml/2008/2/29/74 Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Cc: Jiri Kosina <jkosina@suse.cz> Reported-by: Jiri Olsa <olsajiri@gmail.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: <stable@kernel.org> [2.6.everything] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:47 UTC
1f5e31d Andrea Righi04 February 2009, 23:12:03 UTCfbmem: don't call copy_from/to_user() with mutex held Avoid calling copy_from/to_user() with fb_info->lock mutex held in fbmem ioctl(). fb_mmap() is called under mm->mmap_sem (A) held, that also acquires fb_info->lock (B); fb_ioctl() takes fb_info->lock (B) and does copy_from/to_user() that might acquire mm->mmap_sem (A), causing a deadlock. NOTE: it doesn't push down the fb_info->lock in each own driver's fb_ioctl(), so there are still potential deadlocks elsewhere. Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Johannes Weiner <hannes@saeurebad.de> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:46 UTC
afd8d0f David Brownell04 February 2009, 23:12:01 UTCrtc: rtc-dm355evm driver Simple RTC driver for the MSP430 firmware on the DM355 EVM board. Other than not supporting atomic reads/writes of all four bytes, this is reasonable as a basic no-alarm RTC. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:46 UTC
77a5926 Matthew Garrett04 February 2009, 23:12:00 UTCmisc: dell-laptop should depend on POWER_SUPPLY dell-laptop makes use of the power supply class information to choose which backlight interface to change. Add a depends on it. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:46 UTC
ac7b900 Peter Zijlstra04 February 2009, 23:11:59 UTCgeneric swap(): don't return a value from swap() The swap() macro is accidentally retuning the value of its first argument. Change it into a doesn't-return-anything macro before someone goes and relies upon this behaviour. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:46 UTC
c073b2d David Altobelli04 February 2009, 23:11:58 UTChpilo: open/close fix The device can take a while to respond to an open/close request, so increase the time kernel will wait for response (1 ms to 10ms). Also, properly clean up a channel on a failed open, by calling the channel close routine. Just freeing the memory isn't sufficient, the device needs to be informed that the channel is no longer open, and the device memory cleared of references to freed dma buffer. Signed-off-by: David Altobelli <david.altobelli@hp.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:46 UTC
58763a2 Andrew Morton04 February 2009, 23:11:58 UTCkernel/async.c: fix printk warnings alpha: kernel/async.c: In function 'run_one_entry': kernel/async.c:141: warning: format '%lli' expects type 'long long int', but argument 2 has type 'async_cookie_t' kernel/async.c:149: warning: format '%lli' expects type 'long long int', but argument 2 has type 'async_cookie_t' kernel/async.c:149: warning: format '%lld' expects type 'long long int', but argument 4 has type 's64' kernel/async.c: In function 'async_synchronize_cookie_special': kernel/async.c:250: warning: format '%lli' expects type 'long long int', but argument 3 has type 's64' Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>05 February 2009, 20:56:46 UTC
806638b Chris Mason05 February 2009, 14:08:14 UTCBtrfs: Fix memory leak in cache_drop_leaf_ref The code wasn't doing a kfree on the sorted array Signed-off-by: Chris Mason <chris.mason@oracle.com>05 February 2009, 14:08:14 UTC
e8c0ee5 Takashi Iwai05 February 2009, 06:34:28 UTCALSA: hda - Fix misc workqueue issues Some fixes regarding snd-hda-intel workqueue: - Use create_singlethread_workqueue() instead of create_workqueue() as per-CPU work isn't required. - Allocate workq name string properly - Renamed the workq name to "hd-audio*" to be more obvious. Signed-off-by: Takashi Iwai <tiwai@suse.de>05 February 2009, 06:41:04 UTC
5294e25 Rafael J. Wysocki04 February 2009, 01:09:07 UTCPCI PM: make the PM core more careful with drivers using the new PM framework Currently, the PM core always attempts to manage devices with drivers that use the new PM framework. In particular, it attempts to disable the devices (which is unnecessary), to save their state (which may be undesirable if the driver has done that already) and to put them into low power states (again, this may be undesirable if the driver has already put the device into a low power state). That need not be the right thing to do, so make the core be more careful in this respect. Generally, there are the following categories of devices to consider: * bridge devices without drivers * non-bridge devices without drivers * bridge devices with drivers * non-bridge devices with drivers and each of them should be handled differently. For bridge devices without drivers the PCI PM core will save their state on suspend and restore it (early) during resume, after putting them into D0 if necessary. It will not attempt to do anything else to these devices. For non-bridge devices without drivers the PCI PM core will disable them and save their state on suspend. During resume, it will put them into D0, if necessary, restore their state (early) and reenable them. For bridge devices with drivers the PCI PM core will only save their state on suspend if the driver hasn't done that already. Still, the core will restore their state (early) during resume, after putting them into D0, if necessary. For non-bridge devices with drivers the PCI PM core will only save their state on suspend if the driver hasn't done that already. Also, if the state of the device hasn't been saved by the driver, the core will attempt to put the device into a low power state. During resume the core will restore the state of the device (early), after putting it into D0, if necessary. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 01:22:35 UTC
49c9681 Rafael J. Wysocki04 February 2009, 01:02:15 UTCPCI PM: Read power state from device after trying to change it on resume pci_restore_standard_config() unconditionally changes current_state to PCI_D0 after attempting to change the device's power state, but it should rather read the actual current power state from the device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 01:22:28 UTC
cbbc2f6 Rafael J. Wysocki04 February 2009, 01:01:15 UTCPCI PM: Do not disable and enable bridges during suspend-resume It is a mistake to disable and enable PCI bridges and PCI Express ports during suspend-resume, at least at the time when it is currently done. Disabling them may lead to problems with accessing devices behind them and they should be automatically enabled when their standard config spaces are restored. Fix this by not attempting to disable bridges during suspend and enable them during resume. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 01:21:26 UTC
27be54a Rafael J. Wysocki04 February 2009, 01:00:11 UTCPCI: PCIe portdrv: Simplify suspend and resume Simplify suspend and resume of the PCI Express port driver. It no longer needs to save and restore the standard configuration space of the device; this is now done by the PCI PM core layer. This patch is reported to fix the regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12598 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 01:21:19 UTC
99dadce Rafael J. Wysocki04 February 2009, 00:59:09 UTCPCI PM: Fix saving of device state in pci_legacy_suspend Make pci_legacy_suspend() save the state of the device if it is in PCI_UNKNOWN after its suspend callback has run and warn only if the power state of the device has been changed by its suspend callback. Also, use WARN_ONCE(), which is more useful, in pci_legacy_suspend(), so that the name of the offending function is printed. Additionally, remove the unnecessary line of code setting pci_dev->state_saved. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 01:21:08 UTC
144a76b Rafael J. Wysocki04 February 2009, 00:57:22 UTCPCI PM: Check if the state has been saved before trying to restore it Check if the standard configuration registers of a PCI device have been saved during suspend before trying to restore them during resume. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-By: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 01:20:39 UTC
ddb7c9d Rafael J. Wysocki04 February 2009, 00:56:14 UTCPCI PM: Fix handling of devices without drivers Suspend to RAM is reported to break on some machines as a result of attempting to put one of driverless PCI devices into a low power state. Avoid that by not attepmting to power manage driverless devices during suspend. Fix up pci_pm_poweroff() after a previous incomplete fix for the same thing during hibernation. This patch is reported to fix the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12605 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 01:20:09 UTC
97c4483 Timothy S. Nelson29 January 2009, 19:12:47 UTCPCI: return error on failure to read PCI ROMs This patch makes the ROM reading code return an error to user space if the size of the ROM read is equal to 0. The patch also emits a warnings if the contents of the ROM are invalid, and documents the effects of the "enable" file on ROM reading. Signed-off-by: Timothy S. Nelson <wayland@wayland.id.au> Acked-by: Alex Villacis-Lasso <a_villacis@palosanto.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 00:58:41 UTC
3419c75 Alex Chiang28 January 2009, 21:59:18 UTCPCI: properly clean up ASPM link state on device remove We only want to disable ASPM when the last function is removed from the parent's device list. We determine this by checking to see if the parent's device list is completely empty. Unfortunately, we never hit that code because the parent is considered an upstream port, and never had an ASPM link_state associated with it. The early check for !link_state causes us to return early, we never discover that our device list is empty, and thus we never remove the downstream ports' link_state nodes. Instead of checking to see if the parent's device list is empty, we can check to see if we are the last device on the list, and if so, then we know that we can clean up properly. Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>05 February 2009, 00:58:40 UTC
b98ac70 Andy Fleming05 February 2009, 00:38:05 UTCgianfar: Fix potential soft reset race SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work properly. The syncs in the gfar_write() commands have been hiding this, but we need to guarantee it. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>05 February 2009, 00:38:05 UTC
1fbe493 Andy Fleming05 February 2009, 00:37:40 UTCgianfar: Fix BD_LENGTH_MASK definition BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not the low byte. The old way, we would never be able to clean up tx packets with sizes divisible by 256. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>05 February 2009, 00:37:40 UTC
65ab838 Divy Le Ray05 February 2009, 00:31:39 UTCcxgb3: Fix lro switch The LRO switch is always set to 1 in the rx processing loop. It breaks the accelerated iSCSI receive traffic. Fix its computation. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>05 February 2009, 00:31:39 UTC
f67d817 Takashi Iwai04 February 2009, 22:30:19 UTCALSA: hda - Add quirk for FSC Amilo Xi2550 Added model=fujisu-pi2515 for FSC Amilo Xi2550 with ALC883 codec. Refernece: Novell bnc#450979 https://bugzilla.novell.com/show_bug.cgi?id=450979 Signed-off-by: Takashi Iwai <tiwai@suse.de>04 February 2009, 22:31:50 UTC
647802d Linus Torvalds04 February 2009, 21:58:50 UTCMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: APIC: enable workaround on AMD Fam10h CPUs xen: disable interrupts before saving in percpu x86: add x86@kernel.org to MAINTAINERS x86: push old stack address on irqstack for unwinder irq, x86: fix lock status with numa_migrate_irq_desc x86: add cache descriptors for Intel Core i7 x86/Voyager: make it build and boot04 February 2009, 21:58:50 UTC
3e561f9 Linus Torvalds04 February 2009, 21:58:37 UTCMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: add missing kernel-doc in sched.h04 February 2009, 21:58:37 UTC
9f96ae6 Linus Torvalds04 February 2009, 21:58:24 UTCMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ftrace: do_each_pid_task() needs rcu lock04 February 2009, 21:58:24 UTC
back to top