swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 2dcd0af568b0cf583645c8a317dd12e344b1c72a authored by Linus Torvalds on 15 May 2016, 22:43:13 UTC
Linux 4.6
Linux 4.6
Tip revision: 2dcd0af
parameters.txt
Module Parameters in fmc.ko
***************************
The core driver receives two module parameters, meant to help debugging
client modules. Both parameters can be modified by writing to
/sys/module/fmc/parameters/, because they are used when client drivers
are devices are registered, not when fmc.ko is loaded.
`dump_eeprom='
If not zero, the parameter asks the bus controller to dump the
EEPROM of any device that is registered, using printk.
`dump_sdb='
If not zero, the parameter prints the SDB tree of every FPGA it is
loaded by fmc_reprogram(). If greater than one, it asks to dump
the binary content of SDB records. This currently only dumps the
top-level SDB array, though.
EEPROM dumping avoids repeating lines, since most of the contents is
usually empty and all bits are one or zero. This is an example of the
output:
[ 6625.850480] spec 0000:02:00.0: FPGA programming successful
[ 6626.139949] spec 0000:02:00.0: Manufacturer: CERN
[ 6626.144666] spec 0000:02:00.0: Product name: FmcDelay1ns4cha
[ 6626.150370] FMC: mezzanine 0: 0000:02:00.0 on SPEC
[ 6626.155179] FMC: dumping eeprom 0x2000 (8192) bytes
[ 6626.160087] 0000: 01 00 00 01 00 0b 00 f3 01 0a 00 a5 85 87 c4 43
[ 6626.167069] 0010: 45 52 4e cf 46 6d 63 44 65 6c 61 79 31 6e 73 34
[ 6626.174019] 0020: 63 68 61 c7 70 72 6f 74 6f 2d 30 cc 45 44 41 2d
[ 6626.180975] 0030: 30 32 32 36 37 2d 56 33 da 32 30 31 32 2d 31 31
[...]
[ 6626.371366] 0200: 66 64 65 6c 61 79 0a 00 00 00 00 00 00 00 00 00
[ 6626.378359] 0210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6626.385361] [...]
[ 6626.387308] 1800: 70 6c 61 63 65 68 6f 6c 64 65 72 ff ff ff ff ff
[ 6626.394259] 1810: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6626.401250] [...]
The dump of SDB looks like the following; the example shows the simple
golden gateware for the SPEC card, removing the leading timestamps to
fit the page:
spec 0000:02:00.0: SDB: 00000651:e6a542c9 WB4-Crossbar-GSI
spec 0000:02:00.0: SDB: 0000ce42:ff07fc47 WR-Periph-Syscon (00000000-000000ff)
FMC: mezzanine 0: 0000:02:00.0 on SPEC
FMC: poor dump of sdb first level:
0000: 53 44 42 2d 00 02 01 00 00 00 00 00 00 00 00 00
0010: 00 00 00 00 00 00 01 ff 00 00 00 00 00 00 06 51
0020: e6 a5 42 c9 00 00 00 02 20 12 05 11 57 42 34 2d
0030: 43 72 6f 73 73 62 61 72 2d 47 53 49 20 20 20 00
0040: 00 00 01 01 00 00 00 07 00 00 00 00 00 00 00 00
0050: 00 00 00 00 00 00 00 ff 00 00 00 00 00 00 ce 42
0060: ff 07 fc 47 00 00 00 01 20 12 03 05 57 52 2d 50
0070: 65 72 69 70 68 2d 53 79 73 63 6f 6e 20 20 20 01