swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 7111951b8d4973bda27ff663f2cf18b663d15b48 authored by Linus Torvalds on 29 March 2020, 22:25:41 UTC
Linux 5.6
Linux 5.6
Tip revision: 7111951
sdrc2xxx.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-omap2/sdrc2xxx.c
*
* SDRAM timing related functions for OMAP2xxx
*
* Copyright (C) 2005, 2008 Texas Instruments Inc.
* Copyright (C) 2005, 2008 Nokia Corporation
*
* Tony Lindgren <tony@atomide.com>
* Paul Walmsley
* Richard Woodruff <r-woodruff2@ti.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx.h"
#include "clock.h"
#include "sdrc.h"
#include "sram.h"
/* Memory timing, DLL mode flags */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
#define M_UNLOCK 0
#define M_LOCK 1
static struct memory_timings mem_timings;
static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
{
return mem_timings.slow_dll_ctrl;
}
static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
{
return mem_timings.fast_dll_ctrl;
}
static u32 omap2xxx_sdrc_get_type(void)
{
return mem_timings.m_type;
}
/*
* Check the DLL lock state, and return tue if running in unlock mode.
* This is needed to compensate for the shifted DLL value in unlock mode.
*/
u32 omap2xxx_sdrc_dll_is_unlocked(void)
{
/* dlla and dllb are a set */
u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
if ((dll_state & (1 << 2)) == (1 << 2))
return 1;
else
return 0;
}
/*
* 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
* Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
* CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
*
* Used by the clock framework during CORE DPLL changes
*/
u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
{
u32 dll_ctrl, m_type;
u32 prev = curr_perf_level;
unsigned long flags;
if ((curr_perf_level == level) && !force)
return prev;
if (level == CORE_CLK_SRC_DPLL)
dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
else if (level == CORE_CLK_SRC_DPLL_X2)
dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
else
return prev;
m_type = omap2xxx_sdrc_get_type();
local_irq_save(flags);
/*
* XXX These calls should be abstracted out through a
* prm2xxx.c function
*/
if (cpu_is_omap2420())
writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP);
else
writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP);
omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
curr_perf_level = level;
local_irq_restore(flags);
return prev;
}
/* Used by the clock framework during CORE DPLL changes */
void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
u32 fast_dll = 0;
/* DDR = 1, SDR = 0 */
mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
* In the case of 2422, its ok to use CS1 instead of CS0.
*/
if (cpu_is_omap2422())
mem_timings.base_cs = 1;
else
mem_timings.base_cs = 0;
if (mem_timings.m_type != M_DDR)
return;
/* With DDR we need to determine the low frequency DLL value */
if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
mem_timings.dll_mode = M_UNLOCK;
else
mem_timings.dll_mode = M_LOCK;
if (mem_timings.base_cs == 0) {
fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
} else {
fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
}
if (force_lock_to_unlock_mode) {
fast_dll &= ~0xff00;
fast_dll |= dll_cnt; /* Current lock mode */
}
/* set fast timings with DLL filter disabled */
mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
/* No disruptions, DDR will be offline & C-ABI not followed */
omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
mem_timings.fast_dll_ctrl,
mem_timings.base_cs,
force_lock_to_unlock_mode);
mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */
/* Turn status into unlock ctrl */
mem_timings.slow_dll_ctrl |=
((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
/* 90 degree phase for anything below 133MHz + disable DLL filter */
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}