swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 7111951b8d4973bda27ff663f2cf18b663d15b48 authored by Linus Torvalds on 29 March 2020, 22:25:41 UTC
Linux 5.6
Linux 5.6
Tip revision: 7111951
vp.c
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/init.h>
#include "common.h"
#include "voltage.h"
#include "vp.h"
#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt)
{
struct omap_vp_instance *vp = voltdm->vp;
u32 vpconfig;
char vsel;
vsel = voltdm->pmic->uv_to_vsel(volt);
vpconfig = voltdm->read(vp->vpconfig);
vpconfig &= ~(vp->common->vpconfig_initvoltage_mask |
vp->common->vpconfig_forceupdate |
vp->common->vpconfig_initvdd);
vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask);
voltdm->write(vpconfig, vp->vpconfig);
/* Trigger initVDD value copy to voltage processor */
voltdm->write((vpconfig | vp->common->vpconfig_initvdd),
vp->vpconfig);
/* Clear initVDD copy trigger bit */
voltdm->write(vpconfig, vp->vpconfig);
return vpconfig;
}
/* Generic voltage init functions */
void __init omap_vp_init(struct voltagedomain *voltdm)
{
struct omap_vp_instance *vp = voltdm->vp;
u32 val, sys_clk_rate, timeout, waittime;
u32 vddmin, vddmax, vstepmin, vstepmax;
if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
return;
}
if (!voltdm->read || !voltdm->write) {
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
__func__, voltdm->name);
return;
}
vp->enabled = false;
/* Divide to avoid overflow */
sys_clk_rate = voltdm->sys_clk.rate / 1000;
timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
vddmin = max(voltdm->vp_param->vddmin, voltdm->pmic->vddmin);
vddmax = min(voltdm->vp_param->vddmax, voltdm->pmic->vddmax);
vddmin = voltdm->pmic->uv_to_vsel(vddmin);
vddmax = voltdm->pmic->uv_to_vsel(vddmax);
waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate,
1000 * voltdm->pmic->slew_rate);
vstepmin = voltdm->pmic->vp_vstepmin;
vstepmax = voltdm->pmic->vp_vstepmax;
/*
* VP_CONFIG: error gain is not set here, it will be updated
* on each scale, based on OPP.
*/
val = (voltdm->pmic->vp_erroroffset <<
__ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) |
vp->common->vpconfig_timeouten;
voltdm->write(val, vp->vpconfig);
/* VSTEPMIN */
val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) |
(vstepmin << vp->common->vstepmin_stepmin_shift);
voltdm->write(val, vp->vstepmin);
/* VSTEPMAX */
val = (vstepmax << vp->common->vstepmax_stepmax_shift) |
(waittime << vp->common->vstepmax_smpswaittimemax_shift);
voltdm->write(val, vp->vstepmax);
/* VLIMITTO */
val = (vddmax << vp->common->vlimitto_vddmax_shift) |
(vddmin << vp->common->vlimitto_vddmin_shift) |
(timeout << vp->common->vlimitto_timeout_shift);
voltdm->write(val, vp->vlimitto);
}
int omap_vp_update_errorgain(struct voltagedomain *voltdm,
unsigned long target_volt)
{
struct omap_volt_data *volt_data;
if (!voltdm->vp)
return -EINVAL;
/* Get volt_data corresponding to target_volt */
volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
if (IS_ERR(volt_data))
return -EINVAL;
/* Setting vp errorgain based on the voltage */
voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask,
volt_data->vp_errgain <<
__ffs(voltdm->vp->common->vpconfig_errorgain_mask),
voltdm->vp->vpconfig);
return 0;
}
/* VP force update method of voltage scaling */
int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
unsigned long target_volt)
{
struct omap_vp_instance *vp = voltdm->vp;
u32 vpconfig;
u8 target_vsel, current_vsel;
int ret, timeout = 0;
ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
if (ret)
return ret;
/*
* Clear all pending TransactionDone interrupt/status. Typical latency
* is <3us
*/
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vp->common->ops->clear_txdone(vp->id);
if (!vp->common->ops->check_txdone(vp->id))
break;
udelay(1);
}
if (timeout >= VP_TRANXDONE_TIMEOUT) {
pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted\n",
__func__, voltdm->name);
return -ETIMEDOUT;
}
vpconfig = _vp_set_init_voltage(voltdm, target_volt);
/* Force update of voltage */
voltdm->write(vpconfig | vp->common->vpconfig_forceupdate,
voltdm->vp->vpconfig);
/*
* Wait for TransactionDone. Typical latency is <200us.
* Depends on SMPSWAITTIMEMIN/MAX and voltage change
*/
timeout = 0;
omap_test_timeout(vp->common->ops->check_txdone(vp->id),
VP_TRANXDONE_TIMEOUT, timeout);
if (timeout >= VP_TRANXDONE_TIMEOUT)
pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n",
__func__, voltdm->name);
omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
/*
* Disable TransactionDone interrupt , clear all status, clear
* control registers
*/
timeout = 0;
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vp->common->ops->clear_txdone(vp->id);
if (!vp->common->ops->check_txdone(vp->id))
break;
udelay(1);
}
if (timeout >= VP_TRANXDONE_TIMEOUT)
pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n",
__func__, voltdm->name);
/* Clear force bit */
voltdm->write(vpconfig, vp->vpconfig);
return 0;
}
/**
* omap_vp_enable() - API to enable a particular VP
* @voltdm: pointer to the VDD whose VP is to be enabled.
*
* This API enables a particular voltage processor. Needed by the smartreflex
* class drivers.
*/
void omap_vp_enable(struct voltagedomain *voltdm)
{
struct omap_vp_instance *vp;
u32 vpconfig, volt;
if (!voltdm || IS_ERR(voltdm)) {
pr_warn("%s: VDD specified does not exist!\n", __func__);
return;
}
vp = voltdm->vp;
if (!voltdm->read || !voltdm->write) {
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
__func__, voltdm->name);
return;
}
/* If VP is already enabled, do nothing. Return */
if (vp->enabled)
return;
volt = voltdm_get_voltage(voltdm);
if (!volt) {
pr_warn("%s: unable to find current voltage for %s\n",
__func__, voltdm->name);
return;
}
vpconfig = _vp_set_init_voltage(voltdm, volt);
/* Enable VP */
vpconfig |= vp->common->vpconfig_vpenable;
voltdm->write(vpconfig, vp->vpconfig);
vp->enabled = true;
}
/**
* omap_vp_disable() - API to disable a particular VP
* @voltdm: pointer to the VDD whose VP is to be disabled.
*
* This API disables a particular voltage processor. Needed by the smartreflex
* class drivers.
*/
void omap_vp_disable(struct voltagedomain *voltdm)
{
struct omap_vp_instance *vp;
u32 vpconfig;
int timeout;
if (!voltdm || IS_ERR(voltdm)) {
pr_warn("%s: VDD specified does not exist!\n", __func__);
return;
}
vp = voltdm->vp;
if (!voltdm->read || !voltdm->write) {
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
__func__, voltdm->name);
return;
}
/* If VP is already disabled, do nothing. Return */
if (!vp->enabled) {
pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n",
__func__, voltdm->name);
return;
}
/* Disable VP */
vpconfig = voltdm->read(vp->vpconfig);
vpconfig &= ~vp->common->vpconfig_vpenable;
voltdm->write(vpconfig, vp->vpconfig);
/*
* Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
*/
omap_test_timeout((voltdm->read(vp->vstatus)),
VP_IDLE_TIMEOUT, timeout);
if (timeout >= VP_IDLE_TIMEOUT)
pr_warn("%s: vdd_%s idle timedout\n", __func__, voltdm->name);
vp->enabled = false;
return;
}