swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 0ecfebd2b52404ae0c54a878c872bb93363ada36 authored by Linus Torvalds on 07 July 2019, 22:41:56 UTC
Linux 5.2
Linux 5.2
Tip revision: 0ecfebd
Kconfig.platforms
# SPDX-License-Identifier: GPL-2.0-only
menu "Platform selection"
config ARCH_ACTIONS
bool "Actions Semi Platforms"
select OWL_TIMER
select PINCTRL
help
This enables support for the Actions Semiconductor S900 SoC family.
config ARCH_AGILEX
bool "Intel's Agilex SoCFPGA Family"
help
This enables support for Intel's Agilex SoCFPGA Family.
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select GENERIC_IRQ_CHIP
select PINCTRL
select RESET_CONTROLLER
help
This enables support for Allwinner sunxi based SoCs like the A64.
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
select ALPINE_MSI if PCI
help
This enables support for the Annapurna Labs Alpine
Soc family.
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
select TIMER_OF
select GPIOLIB
select MFD_CORE
select PINCTRL
select PINCTRL_BCM2835
select ARM_AMBA
select ARM_TIMER_SP804
select HAVE_ARM_ARCH_TIMER
help
This enables support for the Broadcom BCM2837 SoC.
This SoC is used in the Raspberry Pi 3 device.
config ARCH_BCM_IPROC
bool "Broadcom iProc SoC Family"
select COMMON_CLK_IPROC
select GPIOLIB
select PINCTRL
help
This enables support for Broadcom iProc based SoCs
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
select DW_APB_ICTL
select GPIOLIB
select PINCTRL
help
This enables support for Marvell Berlin SoC Family
config ARCH_BITMAIN
bool "Bitmain SoC Platforms"
help
This enables support for the Bitmain SoC Family.
config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
select BRCMSTB_L2_IRQ
select GENERIC_IRQ_CHIP
help
This enables support for Broadcom's ARMv8 Set Top Box SoCs
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select SOC_SAMSUNG
help
This enables support for ARMv8 based Samsung Exynos SoC family.
config ARCH_K3
bool "Texas Instruments Inc. K3 multicore SoC architecture"
select PM_GENERIC_DOMAINS if PM
select MAILBOX
select SOC_TI
select TI_MESSAGE_MANAGER
select TI_SCI_PROTOCOL
select TI_SCI_INTR_IRQCHIP
select TI_SCI_INTA_IRQCHIP
help
This enables support for Texas Instruments' K3 multicore SoC
architecture.
config ARCH_LAYERSCAPE
bool "ARMv8 based Freescale Layerscape SoC family"
select EDAC_SUPPORT
help
This enables support for the Freescale Layerscape SoC family.
config ARCH_LG1K
bool "LG Electronics LG1K SoC Family"
help
This enables support for LG Electronics LG1K SoC Family
config ARCH_HISI
bool "Hisilicon SoC Family"
select ARM_TIMER_SP804
select HISILICON_IRQ_MBIGEN if PCI
select PINCTRL
help
This enables support for Hisilicon ARMv8 SoC family
config ARCH_MEDIATEK
bool "MediaTek SoC Family"
select ARM_GIC
select PINCTRL
select MTK_TIMER
help
This enables support for MediaTek MT27xx, MT65xx, MT76xx
& MT81xx ARMv8 SoCs
config ARCH_MESON
bool "Amlogic Platforms"
select PINCTRL
select PINCTRL_MESON
select COMMON_CLK_GXBB
select COMMON_CLK_AXG
select COMMON_CLK_G12A
select MESON_IRQ_GPIO
help
This enables support for the arm64 based Amlogic SoCs
such as the s905, S905X/D, S912, A113X/D or S905X/D2
config ARCH_MVEBU
bool "Marvell EBU SoC Family"
select ARMADA_AP806_SYSCON
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
select GPIOLIB
select GPIOLIB_IRQCHIP
select MVEBU_GICP
select MVEBU_ICU
select MVEBU_ODMI
select MVEBU_PIC
select MVEBU_SEI
select OF_GPIO
select PINCTRL
select PINCTRL_ARMADA_37XX
select PINCTRL_ARMADA_AP806
select PINCTRL_ARMADA_CP110
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
- Armada 7K SoC Family
- Armada 8K SoC Family
config ARCH_MXC
bool "ARMv8 based NXP i.MX SoC family"
select ARM64_ERRATUM_843419
select ARM64_ERRATUM_845719 if COMPAT
select IMX_GPCV2
select IMX_GPCV2_PM_DOMAINS
select PM
select PM_GENERIC_DOMAINS
select SOC_BUS
help
This enables support for the ARMv8 based SoCs in the
NXP i.MX family.
config ARCH_QCOM
bool "Qualcomm Platforms"
select GPIOLIB
select PINCTRL
help
This enables support for the ARMv8 based Qualcomm chipsets.
config ARCH_REALTEK
bool "Realtek Platforms"
help
This enables support for the ARMv8 based Realtek chipsets,
like the RTD1295.
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select GPIOLIB
select PINCTRL
select SOC_BUS
help
This enables support for the ARMv8 based Renesas SoCs.
config ARCH_ROCKCHIP
bool "Rockchip Platforms"
select ARCH_HAS_RESET_CONTROLLER
select GPIOLIB
select PINCTRL
select PINCTRL_ROCKCHIP
select PM
select ROCKCHIP_TIMER
help
This enables support for the ARMv8 based Rockchip chipsets,
like the RK3368.
config ARCH_SEATTLE
bool "AMD Seattle SoC Family"
help
This enables support for AMD Seattle SOC Family
config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family"
help
This enables support for Altera's Stratix 10 SoCFPGA Family.
config ARCH_SYNQUACER
bool "Socionext SynQuacer SoC Family"
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC_PM
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select TIMER_OF
select GENERIC_CLOCKEVENTS
select GPIOLIB
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RESET_CONTROLLER
help
This enables support for the NVIDIA Tegra SoC family.
config ARCH_SPRD
bool "Spreadtrum SoC platform"
help
Support for Spreadtrum ARM based SoCs
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
This enables support for Cavium's Thunder Family of SoCs.
config ARCH_THUNDER2
bool "Cavium ThunderX2 Server Processors"
select GPIOLIB
help
This enables support for Cavium's ThunderX2 CN99XX family of
server processors.
config ARCH_UNIPHIER
bool "Socionext UniPhier SoC Family"
select ARCH_HAS_RESET_CONTROLLER
select PINCTRL
select RESET_CONTROLLER
help
This enables support for Socionext UniPhier SoC family.
config ARCH_VEXPRESS
bool "ARMv8 software model (Versatile Express)"
select COMMON_CLK_VERSATILE
select GPIOLIB
select PM
select PM_GENERIC_DOMAINS
select POWER_RESET_VEXPRESS
select VEXPRESS_CONFIG
help
This enables support for the ARMv8 software model (Versatile
Express).
config ARCH_VULCAN
def_bool n
config ARCH_XGENE
bool "AppliedMicro X-Gene SOC Family"
help
This enables support for AppliedMicro X-Gene SOC Family
config ARCH_ZX
bool "ZTE ZX SoC Family"
select PINCTRL
help
This enables support for ZTE ZX SoC Family
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
select ZYNQMP_FIRMWARE
help
This enables support for Xilinx ZynqMP Family
endmenu