swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 8e4921515c1a379539607eb443d51c30f4f7f338 authored by Linus Torvalds on 08 February 2009, 20:37:20 UTC
Linux 2.6.29-rc4
Linux 2.6.29-rc4
Tip revision: 8e49215
x_unfl.S
|
| x_unfl.sa 3.4 7/1/91
|
| fpsp_unfl --- FPSP handler for underflow exception
|
| Trap disabled results
| For 881/2 compatibility, sw must denormalize the intermediate
| result, then store the result. Denormalization is accomplished
| by taking the intermediate result (which is always normalized) and
| shifting the mantissa right while incrementing the exponent until
| it is equal to the denormalized exponent for the destination
| format. After denormalization, the result is rounded to the
| destination format.
|
| Trap enabled results
| All trap disabled code applies. In addition the exceptional
| operand needs to made available to the user with a bias of $6000
| added to the exponent.
|
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
| For details on the license for this file, please see the
| file, README, in this same directory.
X_UNFL: |idnt 2,1 | Motorola 040 Floating Point Software Package
|section 8
#include "fpsp.h"
|xref denorm
|xref round
|xref store
|xref g_rndpr
|xref g_opcls
|xref g_dfmtou
|xref real_unfl
|xref real_inex
|xref fpsp_done
|xref b1238_fix
.global fpsp_unfl
fpsp_unfl:
link %a6,#-LOCAL_SIZE
fsave -(%a7)
moveml %d0-%d1/%a0-%a1,USER_DA(%a6)
fmovemx %fp0-%fp3,USER_FP0(%a6)
fmoveml %fpcr/%fpsr/%fpiar,USER_FPCR(%a6)
|
bsrl unf_res |denormalize, round & store interm op
|
| If underflow exceptions are not enabled, check for inexact
| exception
|
btstb #unfl_bit,FPCR_ENABLE(%a6)
beqs ck_inex
btstb #E3,E_BYTE(%a6)
beqs no_e3_1
|
| Clear dirty bit on dest resister in the frame before branching
| to b1238_fix.
|
bfextu CMDREG3B(%a6){#6:#3},%d0 |get dest reg no
bclrb %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit
bsrl b1238_fix |test for bug1238 case
movel USER_FPSR(%a6),FPSR_SHADOW(%a6)
orl #sx_mask,E_BYTE(%a6)
no_e3_1:
moveml USER_DA(%a6),%d0-%d1/%a0-%a1
fmovemx USER_FP0(%a6),%fp0-%fp3
fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
frestore (%a7)+
unlk %a6
bral real_unfl
|
| It is possible to have either inex2 or inex1 exceptions with the
| unfl. If the inex enable bit is set in the FPCR, and either
| inex2 or inex1 occurred, we must clean up and branch to the
| real inex handler.
|
ck_inex:
moveb FPCR_ENABLE(%a6),%d0
andb FPSR_EXCEPT(%a6),%d0
andib #0x3,%d0
beqs unfl_done
|
| Inexact enabled and reported, and we must take an inexact exception
|
take_inex:
btstb #E3,E_BYTE(%a6)
beqs no_e3_2
|
| Clear dirty bit on dest resister in the frame before branching
| to b1238_fix.
|
bfextu CMDREG3B(%a6){#6:#3},%d0 |get dest reg no
bclrb %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit
bsrl b1238_fix |test for bug1238 case
movel USER_FPSR(%a6),FPSR_SHADOW(%a6)
orl #sx_mask,E_BYTE(%a6)
no_e3_2:
moveb #INEX_VEC,EXC_VEC+1(%a6)
moveml USER_DA(%a6),%d0-%d1/%a0-%a1
fmovemx USER_FP0(%a6),%fp0-%fp3
fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
frestore (%a7)+
unlk %a6
bral real_inex
unfl_done:
bclrb #E3,E_BYTE(%a6)
beqs e1_set |if set then branch
|
| Clear dirty bit on dest resister in the frame before branching
| to b1238_fix.
|
bfextu CMDREG3B(%a6){#6:#3},%d0 |get dest reg no
bclrb %d0,FPR_DIRTY_BITS(%a6) |clr dest dirty bit
bsrl b1238_fix |test for bug1238 case
movel USER_FPSR(%a6),FPSR_SHADOW(%a6)
orl #sx_mask,E_BYTE(%a6)
moveml USER_DA(%a6),%d0-%d1/%a0-%a1
fmovemx USER_FP0(%a6),%fp0-%fp3
fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
frestore (%a7)+
unlk %a6
bral fpsp_done
e1_set:
moveml USER_DA(%a6),%d0-%d1/%a0-%a1
fmovemx USER_FP0(%a6),%fp0-%fp3
fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar
unlk %a6
bral fpsp_done
|
| unf_res --- underflow result calculation
|
unf_res:
bsrl g_rndpr |returns RND_PREC in d0 0=ext,
| ;1=sgl, 2=dbl
| ;we need the RND_PREC in the
| ;upper word for round
movew #0,-(%a7)
movew %d0,-(%a7) |copy RND_PREC to stack
|
|
| If the exception bit set is E3, the exceptional operand from the
| fpu is in WBTEMP; else it is in FPTEMP.
|
btstb #E3,E_BYTE(%a6)
beqs unf_E1
unf_E3:
lea WBTEMP(%a6),%a0 |a0 now points to operand
|
| Test for fsgldiv and fsglmul. If the inst was one of these, then
| force the precision to extended for the denorm routine. Use
| the user's precision for the round routine.
|
movew CMDREG3B(%a6),%d1 |check for fsgldiv or fsglmul
andiw #0x7f,%d1
cmpiw #0x30,%d1 |check for sgldiv
beqs unf_sgl
cmpiw #0x33,%d1 |check for sglmul
bnes unf_cont |if not, use fpcr prec in round
unf_sgl:
clrl %d0
movew #0x1,(%a7) |override g_rndpr precision
| ;force single
bras unf_cont
unf_E1:
lea FPTEMP(%a6),%a0 |a0 now points to operand
unf_cont:
bclrb #sign_bit,LOCAL_EX(%a0) |clear sign bit
sne LOCAL_SGN(%a0) |store sign
bsrl denorm |returns denorm, a0 points to it
|
| WARNING:
| ;d0 has guard,round sticky bit
| ;make sure that it is not corrupted
| ;before it reaches the round subroutine
| ;also ensure that a0 isn't corrupted
|
| Set up d1 for round subroutine d1 contains the PREC/MODE
| information respectively on upper/lower register halves.
|
bfextu FPCR_MODE(%a6){#2:#2},%d1 |get mode from FPCR
| ;mode in lower d1
addl (%a7)+,%d1 |merge PREC/MODE
|
| WARNING: a0 and d0 are assumed to be intact between the denorm and
| round subroutines. All code between these two subroutines
| must not corrupt a0 and d0.
|
|
| Perform Round
| Input: a0 points to input operand
| d0{31:29} has guard, round, sticky
| d1{01:00} has rounding mode
| d1{17:16} has rounding precision
| Output: a0 points to rounded operand
|
bsrl round |returns rounded denorm at (a0)
|
| Differentiate between store to memory vs. store to register
|
unf_store:
bsrl g_opcls |returns opclass in d0{2:0}
cmpib #0x3,%d0
bnes not_opc011
|
| At this point, a store to memory is pending
|
opc011:
bsrl g_dfmtou
tstb %d0
beqs ext_opc011 |If extended, do not subtract
| ;If destination format is sgl/dbl,
tstb LOCAL_HI(%a0) |If rounded result is normal,don't
| ;subtract
bmis ext_opc011
subqw #1,LOCAL_EX(%a0) |account for denorm bias vs.
| ;normalized bias
| ; normalized denormalized
| ;single $7f $7e
| ;double $3ff $3fe
|
ext_opc011:
bsrl store |stores to memory
bras unf_done |finish up
|
| At this point, a store to a float register is pending
|
not_opc011:
bsrl store |stores to float register
| ;a0 is not corrupted on a store to a
| ;float register.
|
| Set the condition codes according to result
|
tstl LOCAL_HI(%a0) |check upper mantissa
bnes ck_sgn
tstl LOCAL_LO(%a0) |check lower mantissa
bnes ck_sgn
bsetb #z_bit,FPSR_CC(%a6) |set condition codes if zero
ck_sgn:
btstb #sign_bit,LOCAL_EX(%a0) |check the sign bit
beqs unf_done
bsetb #neg_bit,FPSR_CC(%a6)
|
| Finish.
|
unf_done:
btstb #inex2_bit,FPSR_EXCEPT(%a6)
beqs no_aunfl
bsetb #aunfl_bit,FPSR_AEXCEPT(%a6)
no_aunfl:
rts
|end