swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 5666c0947ede0432ba5148570aa66ffb9febff5b authored by Linus Torvalds on 01 December 2005, 06:25:15 UTC
Linux v2.6.15-rc4
Linux v2.6.15-rc4
Tip revision: 5666c09
gbus_int.c
/*
* arch/v850/kernel/gbus_int.c -- Midas labs GBUS interrupt support
*
* Copyright (C) 2001,02,03 NEC Electronics Corporation
* Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* Written by Miles Bader <miles@gnu.org>
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/signal.h>
#include <asm/machdep.h>
/* The number of shared GINT interrupts. */
#define NUM_GINTS 4
/* For each GINT interrupt, how many GBUS interrupts are using it. */
static unsigned gint_num_active_irqs[NUM_GINTS] = { 0 };
/* A table of GINTn interrupts we actually use.
Note that we don't use GINT0 because all the boards we support treat it
specially. */
struct used_gint {
unsigned gint;
unsigned priority;
} used_gint[] = {
{ 1, GBUS_INT_PRIORITY_HIGH },
{ 3, GBUS_INT_PRIORITY_LOW }
};
#define NUM_USED_GINTS (sizeof used_gint / sizeof used_gint[0])
/* A table of which GINT is used by each GBUS interrupts (they are
assigned based on priority). */
static unsigned char gbus_int_gint[IRQ_GBUS_INT_NUM];
/* Interrupt enabling/disabling. */
/* Enable interrupt handling for interrupt IRQ. */
void gbus_int_enable_irq (unsigned irq)
{
unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
|= GBUS_INT_IRQ_MASK (irq);
}
/* Disable interrupt handling for interrupt IRQ. Note that any
interrupts received while disabled will be delivered once the
interrupt is enabled again, unless they are explicitly cleared using
`gbus_int_clear_pending_irq'. */
void gbus_int_disable_irq (unsigned irq)
{
unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
&= ~GBUS_INT_IRQ_MASK (irq);
}
/* Return true if interrupt handling for interrupt IRQ is enabled. */
int gbus_int_irq_enabled (unsigned irq)
{
unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
return (GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
& GBUS_INT_IRQ_MASK(irq));
}
/* Disable all GBUS irqs. */
void gbus_int_disable_irqs ()
{
unsigned w, n;
for (w = 0; w < GBUS_INT_NUM_WORDS; w++)
for (n = 0; n < IRQ_GINT_NUM; n++)
GBUS_INT_ENABLE (w, n) = 0;
}
/* Clear any pending interrupts for IRQ. */
void gbus_int_clear_pending_irq (unsigned irq)
{
GBUS_INT_CLEAR (GBUS_INT_IRQ_WORD(irq)) = GBUS_INT_IRQ_MASK (irq);
}
/* Return true if interrupt IRQ is pending (but disabled). */
int gbus_int_irq_pending (unsigned irq)
{
return (GBUS_INT_STATUS (GBUS_INT_IRQ_WORD(irq))
& GBUS_INT_IRQ_MASK(irq));
}
/* Delegating interrupts. */
/* Handle a shared GINT interrupt by passing to the appropriate GBUS
interrupt handler. */
static irqreturn_t gbus_int_handle_irq (int irq, void *dev_id,
struct pt_regs *regs)
{
unsigned w;
irqreturn_t rval = IRQ_NONE;
unsigned gint = irq - IRQ_GINT (0);
for (w = 0; w < GBUS_INT_NUM_WORDS; w++) {
unsigned status = GBUS_INT_STATUS (w);
unsigned enable = GBUS_INT_ENABLE (w, gint);
/* Only pay attention to enabled interrupts. */
status &= enable;
if (status) {
irq = IRQ_GBUS_INT (w * GBUS_INT_BITS_PER_WORD);
do {
/* There's an active interrupt in word
W, find out which one, and call its
handler. */
while (! (status & 0x1)) {
irq++;
status >>= 1;
}
status &= ~0x1;
/* Recursively call handle_irq to handle it. */
handle_irq (irq, regs);
rval = IRQ_HANDLED;
} while (status);
}
}
/* Toggle the `all enable' bit back and forth, which should cause
another edge transition if there are any other interrupts
still pending, and so result in another CPU interrupt. */
GBUS_INT_ENABLE (0, gint) &= ~0x1;
GBUS_INT_ENABLE (0, gint) |= 0x1;
return rval;
}
/* Initialize GBUS interrupt sources. */
static void irq_nop (unsigned irq) { }
static unsigned gbus_int_startup_irq (unsigned irq)
{
unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
if (gint_num_active_irqs[gint] == 0) {
/* First enable the CPU interrupt. */
int rval =
request_irq (IRQ_GINT(gint), gbus_int_handle_irq,
SA_INTERRUPT,
"gbus_int_handler",
&gint_num_active_irqs[gint]);
if (rval != 0)
return rval;
}
gint_num_active_irqs[gint]++;
gbus_int_clear_pending_irq (irq);
gbus_int_enable_irq (irq);
return 0;
}
static void gbus_int_shutdown_irq (unsigned irq)
{
unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
gbus_int_disable_irq (irq);
if (--gint_num_active_irqs[gint] == 0)
/* Disable the CPU interrupt. */
free_irq (IRQ_GINT(gint), &gint_num_active_irqs[gint]);
}
/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
INITS (which is terminated by an entry with the name field == 0). */
void __init gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
struct hw_interrupt_type *hw_irq_types)
{
struct gbus_int_irq_init *init;
for (init = inits; init->name; init++) {
unsigned i;
struct hw_interrupt_type *hwit = hw_irq_types++;
hwit->typename = init->name;
hwit->startup = gbus_int_startup_irq;
hwit->shutdown = gbus_int_shutdown_irq;
hwit->enable = gbus_int_enable_irq;
hwit->disable = gbus_int_disable_irq;
hwit->ack = irq_nop;
hwit->end = irq_nop;
/* Initialize kernel IRQ infrastructure for this interrupt. */
init_irq_handlers(init->base, init->num, init->interval, hwit);
/* Set the interrupt priorities. */
for (i = 0; i < init->num; i++) {
unsigned j;
for (j = 0; j < NUM_USED_GINTS; j++)
if (used_gint[j].priority > init->priority)
break;
/* Wherever we stopped looking is one past the
GINT we want. */
gbus_int_gint[init->base + i * init->interval
- GBUS_INT_BASE_IRQ]
= used_gint[j > 0 ? j - 1 : 0].gint;
}
}
}
/* Initialize IRQS. */
/* Chip interrupts (GINTn) shared among GBUS interrupts. */
static struct hw_interrupt_type gint_hw_itypes[NUM_USED_GINTS];
/* GBUS interrupts themselves. */
struct gbus_int_irq_init gbus_irq_inits[] __initdata = {
/* First set defaults. */
{ "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6},
{ 0 }
};
#define NUM_GBUS_IRQ_INITS \
((sizeof gbus_irq_inits / sizeof gbus_irq_inits[0]) - 1)
static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
/* Initialize GBUS interrupts. */
void __init gbus_int_init_irqs (void)
{
unsigned i;
/* First initialize the shared gint interrupts. */
for (i = 0; i < NUM_USED_GINTS; i++) {
unsigned gint = used_gint[i].gint;
struct v850e_intc_irq_init gint_irq_init[2];
/* We initialize one GINT interrupt at a time. */
gint_irq_init[0].name = "GINT";
gint_irq_init[0].base = IRQ_GINT (gint);
gint_irq_init[0].num = 1;
gint_irq_init[0].interval = 1;
gint_irq_init[0].priority = used_gint[i].priority;
gint_irq_init[1].name = 0; /* Terminate the vector. */
v850e_intc_init_irq_types (gint_irq_init, gint_hw_itypes);
}
/* Then the GBUS interrupts. */
gbus_int_disable_irqs ();
gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
/* Turn on the `all enable' bits, which are ANDed with
individual interrupt enable bits; we only want to bother with
the latter. They are the first bit in the first word of each
interrupt-enable area. */
for (i = 0; i < NUM_USED_GINTS; i++)
GBUS_INT_ENABLE (0, used_gint[i].gint) = 0x1;
}