swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: c59765042f53a79a7a65585042ff463b69cb248c authored by Linus Torvalds on 10 January 2009, 23:43:05 UTC
Linux 2.6.29-rc1
Linux 2.6.29-rc1
Tip revision: c597650
irq_32.c
/*
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
*
* This file contains the lowest level x86-specific interrupt
* entry, irq-stacks and irq statistics code. All the remaining
* irq logic is done by the generic kernel/irq/ code and
* by the x86-specific irq controller code. (e.g. i8259.c and
* io_apic.c.)
*/
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
#include <asm/apic.h>
DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
EXPORT_PER_CPU_SYMBOL(irq_stat);
DEFINE_PER_CPU(struct pt_regs *, irq_regs);
EXPORT_PER_CPU_SYMBOL(irq_regs);
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* Debugging check for stack overflow: is there less than 1KB free? */
static int check_stack_overflow(void)
{
long sp;
__asm__ __volatile__("andl %%esp,%0" :
"=r" (sp) : "0" (THREAD_SIZE - 1));
return sp < (sizeof(struct thread_info) + STACK_WARN);
}
static void print_stack_overflow(void)
{
printk(KERN_WARNING "low stack detected by irq handler\n");
dump_stack();
}
#else
static inline int check_stack_overflow(void) { return 0; }
static inline void print_stack_overflow(void) { }
#endif
#ifdef CONFIG_4KSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
*/
union irq_ctx {
struct thread_info tinfo;
u32 stack[THREAD_SIZE/sizeof(u32)];
};
static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
static void call_on_stack(void *func, void *stack)
{
asm volatile("xchgl %%ebx,%%esp \n"
"call *%%edi \n"
"movl %%ebx,%%esp \n"
: "=b" (stack)
: "0" (stack),
"D"(func)
: "memory", "cc", "edx", "ecx", "eax");
}
static inline int
execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
{
union irq_ctx *curctx, *irqctx;
u32 *isp, arg1, arg2;
curctx = (union irq_ctx *) current_thread_info();
irqctx = hardirq_ctx[smp_processor_id()];
/*
* this is where we switch to the IRQ stack. However, if we are
* already using the IRQ stack (because we interrupted a hardirq
* handler) we can't do that and just have to keep using the
* current stack (which is the irq stack already after all)
*/
if (unlikely(curctx == irqctx))
return 0;
/* build the stack frame on the IRQ stack */
isp = (u32 *) ((char *)irqctx + sizeof(*irqctx));
irqctx->tinfo.task = curctx->tinfo.task;
irqctx->tinfo.previous_esp = current_stack_pointer;
/*
* Copy the softirq bits in preempt_count so that the
* softirq checks work in the hardirq context.
*/
irqctx->tinfo.preempt_count =
(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
if (unlikely(overflow))
call_on_stack(print_stack_overflow, isp);
asm volatile("xchgl %%ebx,%%esp \n"
"call *%%edi \n"
"movl %%ebx,%%esp \n"
: "=a" (arg1), "=d" (arg2), "=b" (isp)
: "0" (irq), "1" (desc), "2" (isp),
"D" (desc->handle_irq)
: "memory", "cc", "ecx");
return 1;
}
/*
* allocate per-cpu stacks for hardirq and for softirq processing
*/
void __cpuinit irq_ctx_init(int cpu)
{
union irq_ctx *irqctx;
if (hardirq_ctx[cpu])
return;
irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
irqctx->tinfo.task = NULL;
irqctx->tinfo.exec_domain = NULL;
irqctx->tinfo.cpu = cpu;
irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
hardirq_ctx[cpu] = irqctx;
irqctx = (union irq_ctx *) &softirq_stack[cpu*THREAD_SIZE];
irqctx->tinfo.task = NULL;
irqctx->tinfo.exec_domain = NULL;
irqctx->tinfo.cpu = cpu;
irqctx->tinfo.preempt_count = 0;
irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
softirq_ctx[cpu] = irqctx;
printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n",
cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
}
void irq_ctx_exit(int cpu)
{
hardirq_ctx[cpu] = NULL;
}
asmlinkage void do_softirq(void)
{
unsigned long flags;
struct thread_info *curctx;
union irq_ctx *irqctx;
u32 *isp;
if (in_interrupt())
return;
local_irq_save(flags);
if (local_softirq_pending()) {
curctx = current_thread_info();
irqctx = softirq_ctx[smp_processor_id()];
irqctx->tinfo.task = curctx->task;
irqctx->tinfo.previous_esp = current_stack_pointer;
/* build the stack frame on the softirq stack */
isp = (u32 *) ((char *)irqctx + sizeof(*irqctx));
call_on_stack(__do_softirq, isp);
/*
* Shouldnt happen, we returned above if in_interrupt():
*/
WARN_ON_ONCE(softirq_count());
}
local_irq_restore(flags);
}
#else
static inline int
execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; }
#endif
/*
* do_IRQ handles all normal device IRQ's (the special
* SMP cross-CPU interrupts have their own specific
* handlers).
*/
unsigned int do_IRQ(struct pt_regs *regs)
{
struct pt_regs *old_regs;
/* high bit used in ret_from_ code */
int overflow;
unsigned vector = ~regs->orig_ax;
struct irq_desc *desc;
unsigned irq;
old_regs = set_irq_regs(regs);
irq_enter();
irq = __get_cpu_var(vector_irq)[vector];
overflow = check_stack_overflow();
desc = irq_to_desc(irq);
if (unlikely(!desc)) {
printk(KERN_EMERG "%s: cannot handle IRQ %d vector %#x cpu %d\n",
__func__, irq, vector, smp_processor_id());
BUG();
}
if (!execute_on_irq_stack(overflow, desc, irq)) {
if (unlikely(overflow))
print_stack_overflow();
desc->handle_irq(irq, desc);
}
irq_exit();
set_irq_regs(old_regs);
return 1;
}
#ifdef CONFIG_HOTPLUG_CPU
#include <mach_apic.h>
/* A cpu has been removed from cpu_online_mask. Reset irq affinities. */
void fixup_irqs(void)
{
unsigned int irq;
static int warned;
struct irq_desc *desc;
for_each_irq_desc(irq, desc) {
const struct cpumask *affinity;
if (!desc)
continue;
if (irq == 2)
continue;
affinity = &desc->affinity;
if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
printk("Breaking affinity for irq %i\n", irq);
affinity = cpu_all_mask;
}
if (desc->chip->set_affinity)
desc->chip->set_affinity(irq, affinity);
else if (desc->action && !(warned++))
printk("Cannot set affinity for irq %i\n", irq);
}
#if 0
barrier();
/* Ingo Molnar says: "after the IO-APIC masks have been redirected
[note the nop - the interrupt-enable boundary on x86 is two
instructions from sti] - to flush out pending hardirqs and
IPIs. After this point nothing is supposed to reach this CPU." */
__asm__ __volatile__("sti; nop; cli");
barrier();
#else
/* That doesn't seem sufficient. Give it 1ms. */
local_irq_enable();
mdelay(1);
local_irq_disable();
#endif
}
#endif