swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: 15ade5d2e7775667cf191cf2f94327a4889f8b9d authored by Linus Torvalds on 08 April 2019, 00:09:59 UTC
Linux 5.1-rc4
Linux 5.1-rc4
Tip revision: 15ade5d
tsc_msr.c
// SPDX-License-Identifier: GPL-2.0
/*
* TSC frequency enumeration via MSR
*
* Copyright (C) 2013, 2018 Intel Corporation
* Author: Bin Gao <bin.gao@intel.com>
*/
#include <linux/kernel.h>
#include <asm/apic.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/msr.h>
#include <asm/param.h>
#include <asm/tsc.h>
#define MAX_NUM_FREQS 9
/*
* If MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
* read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40].
* Unfortunately some Intel Atom SoCs aren't quite compliant to this,
* so we need manually differentiate SoC families. This is what the
* field msr_plat does.
*/
struct freq_desc {
u8 msr_plat; /* 1: use MSR_PLATFORM_INFO, 0: MSR_IA32_PERF_STATUS */
u32 freqs[MAX_NUM_FREQS];
};
/*
* Penwell and Clovertrail use spread spectrum clock,
* so the freq number is not exactly the same as reported
* by MSR based on SDM.
*/
static const struct freq_desc freq_desc_pnw = {
0, { 0, 0, 0, 0, 0, 99840, 0, 83200 }
};
static const struct freq_desc freq_desc_clv = {
0, { 0, 133200, 0, 0, 0, 99840, 0, 83200 }
};
static const struct freq_desc freq_desc_byt = {
1, { 83300, 100000, 133300, 116700, 80000, 0, 0, 0 }
};
static const struct freq_desc freq_desc_cht = {
1, { 83300, 100000, 133300, 116700, 80000, 93300, 90000, 88900, 87500 }
};
static const struct freq_desc freq_desc_tng = {
1, { 0, 100000, 133300, 0, 0, 0, 0, 0 }
};
static const struct freq_desc freq_desc_ann = {
1, { 83300, 100000, 133300, 100000, 0, 0, 0, 0 }
};
static const struct x86_cpu_id tsc_msr_cpu_ids[] = {
INTEL_CPU_FAM6(ATOM_SALTWELL_MID, freq_desc_pnw),
INTEL_CPU_FAM6(ATOM_SALTWELL_TABLET, freq_desc_clv),
INTEL_CPU_FAM6(ATOM_SILVERMONT, freq_desc_byt),
INTEL_CPU_FAM6(ATOM_SILVERMONT_MID, freq_desc_tng),
INTEL_CPU_FAM6(ATOM_AIRMONT, freq_desc_cht),
INTEL_CPU_FAM6(ATOM_AIRMONT_MID, freq_desc_ann),
{}
};
/*
* MSR-based CPU/TSC frequency discovery for certain CPUs.
*
* Set global "lapic_timer_frequency" to bus_clock_cycles/jiffy
* Return processor base frequency in KHz, or 0 on failure.
*/
unsigned long cpu_khz_from_msr(void)
{
u32 lo, hi, ratio, freq;
const struct freq_desc *freq_desc;
const struct x86_cpu_id *id;
unsigned long res;
id = x86_match_cpu(tsc_msr_cpu_ids);
if (!id)
return 0;
freq_desc = (struct freq_desc *)id->driver_data;
if (freq_desc->msr_plat) {
rdmsr(MSR_PLATFORM_INFO, lo, hi);
ratio = (lo >> 8) & 0xff;
} else {
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
ratio = (hi >> 8) & 0x1f;
}
/* Get FSB FREQ ID */
rdmsr(MSR_FSB_FREQ, lo, hi);
/* Map CPU reference clock freq ID(0-7) to CPU reference clock freq(KHz) */
freq = freq_desc->freqs[lo & 0x7];
/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
res = freq * ratio;
#ifdef CONFIG_X86_LOCAL_APIC
lapic_timer_frequency = (freq * 1000) / HZ;
#endif
/*
* TSC frequency determined by MSR is always considered "known"
* because it is reported by HW.
* Another fact is that on MSR capable platforms, PIT/HPET is
* generally not available so calibration won't work at all.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
/*
* Unfortunately there is no way for hardware to tell whether the
* TSC is reliable. We were told by silicon design team that TSC
* on Atom SoCs are always "reliable". TSC is also the only
* reliable clocksource on these SoCs (HPET is either not present
* or not functional) so mark TSC reliable which removes the
* requirement for a watchdog clocksource.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
return res;
}