swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: e4e737bb5c170df6135a127739a9e6148ee3da82 authored by Linus Torvalds on 20 September 2021, 00:28:22 UTC
Linux 5.15-rc2
Linux 5.15-rc2
Tip revision: e4e737b
clk-wm831x.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* WM831x clock control
*
* Copyright 2011-2 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*/
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/mfd/wm831x/core.h>
struct wm831x_clk {
struct wm831x *wm831x;
struct clk_hw xtal_hw;
struct clk_hw fll_hw;
struct clk_hw clkout_hw;
bool xtal_ena;
};
static int wm831x_xtal_is_prepared(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
xtal_hw);
return clkdata->xtal_ena;
}
static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
xtal_hw);
if (clkdata->xtal_ena)
return 32768;
else
return 0;
}
static const struct clk_ops wm831x_xtal_ops = {
.is_prepared = wm831x_xtal_is_prepared,
.recalc_rate = wm831x_xtal_recalc_rate,
};
static const struct clk_init_data wm831x_xtal_init = {
.name = "xtal",
.ops = &wm831x_xtal_ops,
};
static const unsigned long wm831x_fll_auto_rates[] = {
2048000,
11289600,
12000000,
12288000,
19200000,
22579600,
24000000,
24576000,
};
static int wm831x_fll_is_prepared(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
fll_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_1);
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read FLL_CONTROL_1: %d\n",
ret);
return true;
}
return (ret & WM831X_FLL_ENA) != 0;
}
static int wm831x_fll_prepare(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
fll_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1,
WM831X_FLL_ENA, WM831X_FLL_ENA);
if (ret != 0)
dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret);
/* wait 2-3 ms for new frequency taking effect */
usleep_range(2000, 3000);
return ret;
}
static void wm831x_fll_unprepare(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
fll_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1, WM831X_FLL_ENA, 0);
if (ret != 0)
dev_crit(wm831x->dev, "Failed to disable FLL: %d\n", ret);
}
static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
fll_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
ret);
return 0;
}
if (ret & WM831X_FLL_AUTO)
return wm831x_fll_auto_rates[ret & WM831X_FLL_AUTO_FREQ_MASK];
dev_err(wm831x->dev, "FLL only supported in AUTO mode\n");
return 0;
}
static long wm831x_fll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *unused)
{
int best = 0;
int i;
for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
if (abs(wm831x_fll_auto_rates[i] - rate) <
abs(wm831x_fll_auto_rates[best] - rate))
best = i;
return wm831x_fll_auto_rates[best];
}
static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
fll_hw);
struct wm831x *wm831x = clkdata->wm831x;
int i;
for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
if (wm831x_fll_auto_rates[i] == rate)
break;
if (i == ARRAY_SIZE(wm831x_fll_auto_rates))
return -EINVAL;
if (wm831x_fll_is_prepared(hw))
return -EPERM;
return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2,
WM831X_FLL_AUTO_FREQ_MASK, i);
}
static const char *wm831x_fll_parents[] = {
"xtal",
"clkin",
};
static u8 wm831x_fll_get_parent(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
fll_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
/* AUTO mode is always clocked from the crystal */
ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
ret);
return 0;
}
if (ret & WM831X_FLL_AUTO)
return 0;
ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_5);
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read FLL_CONTROL_5: %d\n",
ret);
return 0;
}
switch (ret & WM831X_FLL_CLK_SRC_MASK) {
case 0:
return 0;
case 1:
return 1;
default:
dev_err(wm831x->dev, "Unsupported FLL clock source %d\n",
ret & WM831X_FLL_CLK_SRC_MASK);
return 0;
}
}
static const struct clk_ops wm831x_fll_ops = {
.is_prepared = wm831x_fll_is_prepared,
.prepare = wm831x_fll_prepare,
.unprepare = wm831x_fll_unprepare,
.round_rate = wm831x_fll_round_rate,
.recalc_rate = wm831x_fll_recalc_rate,
.set_rate = wm831x_fll_set_rate,
.get_parent = wm831x_fll_get_parent,
};
static const struct clk_init_data wm831x_fll_init = {
.name = "fll",
.ops = &wm831x_fll_ops,
.parent_names = wm831x_fll_parents,
.num_parents = ARRAY_SIZE(wm831x_fll_parents),
.flags = CLK_SET_RATE_GATE,
};
static int wm831x_clkout_is_prepared(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
clkout_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
ret);
return false;
}
return (ret & WM831X_CLKOUT_ENA) != 0;
}
static int wm831x_clkout_prepare(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
clkout_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_reg_unlock(wm831x);
if (ret != 0) {
dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
return ret;
}
ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
WM831X_CLKOUT_ENA, WM831X_CLKOUT_ENA);
if (ret != 0)
dev_crit(wm831x->dev, "Failed to enable CLKOUT: %d\n", ret);
wm831x_reg_lock(wm831x);
return ret;
}
static void wm831x_clkout_unprepare(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
clkout_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_reg_unlock(wm831x);
if (ret != 0) {
dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
return;
}
ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
WM831X_CLKOUT_ENA, 0);
if (ret != 0)
dev_crit(wm831x->dev, "Failed to disable CLKOUT: %d\n", ret);
wm831x_reg_lock(wm831x);
}
static const char *wm831x_clkout_parents[] = {
"fll",
"xtal",
};
static u8 wm831x_clkout_get_parent(struct clk_hw *hw)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
clkout_hw);
struct wm831x *wm831x = clkdata->wm831x;
int ret;
ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
ret);
return 0;
}
if (ret & WM831X_CLKOUT_SRC)
return 1;
else
return 0;
}
static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent)
{
struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
clkout_hw);
struct wm831x *wm831x = clkdata->wm831x;
return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
WM831X_CLKOUT_SRC,
parent << WM831X_CLKOUT_SRC_SHIFT);
}
static const struct clk_ops wm831x_clkout_ops = {
.is_prepared = wm831x_clkout_is_prepared,
.prepare = wm831x_clkout_prepare,
.unprepare = wm831x_clkout_unprepare,
.get_parent = wm831x_clkout_get_parent,
.set_parent = wm831x_clkout_set_parent,
};
static const struct clk_init_data wm831x_clkout_init = {
.name = "clkout",
.ops = &wm831x_clkout_ops,
.parent_names = wm831x_clkout_parents,
.num_parents = ARRAY_SIZE(wm831x_clkout_parents),
.flags = CLK_SET_RATE_PARENT,
};
static int wm831x_clk_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_clk *clkdata;
int ret;
clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL);
if (!clkdata)
return -ENOMEM;
clkdata->wm831x = wm831x;
/* XTAL_ENA can only be set via OTP/InstantConfig so just read once */
ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
if (ret < 0) {
dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
ret);
return ret;
}
clkdata->xtal_ena = ret & WM831X_XTAL_ENA;
clkdata->xtal_hw.init = &wm831x_xtal_init;
ret = devm_clk_hw_register(&pdev->dev, &clkdata->xtal_hw);
if (ret)
return ret;
clkdata->fll_hw.init = &wm831x_fll_init;
ret = devm_clk_hw_register(&pdev->dev, &clkdata->fll_hw);
if (ret)
return ret;
clkdata->clkout_hw.init = &wm831x_clkout_init;
ret = devm_clk_hw_register(&pdev->dev, &clkdata->clkout_hw);
if (ret)
return ret;
platform_set_drvdata(pdev, clkdata);
return 0;
}
static struct platform_driver wm831x_clk_driver = {
.probe = wm831x_clk_probe,
.driver = {
.name = "wm831x-clk",
},
};
module_platform_driver(wm831x_clk_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM831x clock driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-clk");