swh:1:snp:77163734605b0ec556b01d897b7bb4a7e30d46b6
Tip revision: a3b22b9f11d9fbc48b0291ea92259a5a810e9438 authored by Linus Torvalds on 18 February 2019, 02:46:40 UTC
Linux 5.0-rc7
Linux 5.0-rc7
Tip revision: a3b22b9
ide-scan-pci.c
/*
* support for probing IDE PCI devices in the PCI bus order
*
* Copyright (c) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (c) 1995-1998 Mark Lord
*
* May be copied or modified under the terms of the GNU General Public License
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>
/*
* Module interfaces
*/
static int pre_init = 1; /* Before first ordered IDE scan */
static LIST_HEAD(ide_pci_drivers);
/*
* __ide_pci_register_driver - attach IDE driver
* @driver: pci driver
* @module: owner module of the driver
*
* Registers a driver with the IDE layer. The IDE layer arranges that
* boot time setup is done in the expected device order and then
* hands the controllers off to the core PCI code to do the rest of
* the work.
*
* Returns are the same as for pci_register_driver
*/
int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
const char *mod_name)
{
if (!pre_init)
return __pci_register_driver(driver, module, mod_name);
driver->driver.owner = module;
list_add_tail(&driver->node, &ide_pci_drivers);
return 0;
}
EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
/**
* ide_scan_pcidev - find an IDE driver for a device
* @dev: PCI device to check
*
* Look for an IDE driver to handle the device we are considering.
* This is only used during boot up to get the ordering correct. After
* boot up the pci layer takes over the job.
*/
static int __init ide_scan_pcidev(struct pci_dev *dev)
{
struct list_head *l;
struct pci_driver *d;
int ret;
list_for_each(l, &ide_pci_drivers) {
d = list_entry(l, struct pci_driver, node);
if (d->id_table) {
const struct pci_device_id *id =
pci_match_id(d->id_table, dev);
if (id != NULL) {
pci_assign_irq(dev);
ret = d->probe(dev, id);
if (ret >= 0) {
dev->driver = d;
pci_dev_get(dev);
return 1;
}
}
}
}
return 0;
}
/**
* ide_scan_pcibus - perform the initial IDE driver scan
*
* Perform the initial bus rather than driver ordered scan of the
* PCI drivers. After this all IDE pci handling becomes standard
* module ordering not traditionally ordered.
*/
static int __init ide_scan_pcibus(void)
{
struct pci_dev *dev = NULL;
struct pci_driver *d;
struct list_head *l, *n;
pre_init = 0;
for_each_pci_dev(dev)
ide_scan_pcidev(dev);
/*
* Hand the drivers over to the PCI layer now we
* are post init.
*/
list_for_each_safe(l, n, &ide_pci_drivers) {
list_del(l);
d = list_entry(l, struct pci_driver, node);
if (__pci_register_driver(d, d->driver.owner,
d->driver.mod_name))
printk(KERN_ERR "%s: failed to register %s driver\n",
__func__, d->driver.mod_name);
}
return 0;
}
device_initcall(ide_scan_pcibus);